My phone can only go into Download mode (not 100% bricked) when i try to install samfirmware i can't get the rar file extracted to tar file odin needs, so i can try to get my phone working again, the two passwords i try dosn't work or the file is broken.
My sgs is a European model
What to do ?
Related
Hi
I wanted to downgrade my galaxy s2 it's currently on XWK14. I want to downgrade to the older XWKE1, only using official firmware.
I got the XWKE1 firmware off sam mobile and extracted the file but ended up with another Rar Archive once I extracted the original one which contained some crap I can't use and no Tar file, I used WinRar extracter.
So I then used frog extracter which did the exact same thing as WinRar so I then used 7win and selected Tar file all it did was label the archive into a Tar Archive and when extracted give the same files as WinRar and Frog which i've listed here:
boot.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
sbl.bin
zImage
Am using odin 1.85 (can be used to flash S2 I checked) to flash the phone but without a Tar file I can't do anything if anyone can help i'll really appreciatwe it .
That couldnt be! Try to download it again or youse another firmware package from another website or another firmware!
Normally when you extract the file there must be a .md5 file.
You should have a file that ends .tar.md5 this is the file that you flash as the pda using odin. Thats it
Hi all,
Can anyone pls point me to download N8000 Factory Firmware with all files:
CSC, CODE, MODEM (and maybe BOOTLOADER also) and PIT.
Possibly also that of i8190 - Galaxy S3 mini
Thanks in advance
http://samsung-updates.com/device/?id=GT-N8000
http://samsung-updates.com/device/?id=GT-I8190
Which file?
There are too many files on those links and im sure most of them will be 1 single file (md5 or tar)
But what I need is the complete 3 or 4 files with PIT.
Do you know which ?
Sammobile.com have a look also look at the PIT file post here some place .
Your post should be in Q&A its not development .
dannyogolo said:
There are too many files on those links and im sure most of them will be 1 single file (md5 or tar)
But what I need is the complete 3 or 4 files with PIT.
Do you know which ?
Click to expand...
Click to collapse
You can use Heimdall to extract your PIT, just put your device in download mode and go to utilities -> detect; then press download.
For the files, just extract your .zip file, rename the .tar.md5 as .tar, and if you have 7z installed you can extract this file.
You'll find the files you need.
With much embarrassment I have to admit I really thought I was smarter than a tablet and a few simple clicks. Apparently not. So now I am here with issues that I am sure someone can answer because your more advanced than a few clicks and a tablet.
I have briefly looked for a resolve to my issue but it is very overwhelming. So if you can just point me in the right direction and hold my hand at the same time I would be very appreciative :good:
Issues:
I originally downloaded Odin, GT-P5113 4.0.4, CM 12.1, CW Unofficial Touch 6.0.3.3 p5100 zip. I launced Odin and followed the steps from a you-tube video. Well upon my surprise CW was not on the tablet so I was at the Tabs generic recovery screen. I choose the option to delete all user data ( lots of no's to select from and one Yes). Well continuing to be a fool I completed this process. When the tablet rebooted I was stuck at the Samsung logo screen. I decided to get to the download screen and install smt810_cf_autoroot.tar. After loading this tar via Odin I became stuck on the Android man downloading screen. Waited a bit and nothing. Then my tablet shut down and came up with "Firmware upgrade encountered and issue" with the tablet-yellow ! icon and pc icon.
Another issue is when i download these files Odin will not find them in my file. Why? I usually keep them unzipped as a .rar in order for odin to show them so I can select PDA and attempt to install them.
Is there a way to still upgrade the Android system and fix this Firmware error at the same time?
Basically I am so new to this I need specific directions on resolving my issue. So if anyone has a moment please help me out here. I appreciate your time and knowledge
And I can use Odin to install to the tablet. If that helps Just not in the download screen on the tablet.
Learning76 said:
And I can use Odin to install to the tablet. If that helps Just not in the download screen on the tablet.
Click to expand...
Click to collapse
first you should download the stock firmware of your device, if it's p5113 then search and download the same firmware.
http://forum.xda-developers.com/showthread.php?t=2203309 check this thread if it's there, if it's not please google it, if already have it, ignore..
Once you have it, you should get the firmware md5 file (by unzipping the rar.) Odin will take tar file or md5 file. put it in Odin AP/PDA check the thread for all the details on how to flash correctly.
you have to get into download mode by pressing the power and volume up/right to do that once the firmware is successfully flashed and your tab starts running again. first get this part done.
Always use files that are meant only for your device. if your tab say p5113. then make sure the file you are flashing states it is meant for p5113 and not p5100. (maybe not in the rooting case cause it's same
http://forum.xda-developers.com/showthread.php?t=2203309 here for all)
At some places you will find files marked as p51xx. those files are generally safe too and are meant for the p51xx tab series but that is later stage.
I appreciate the feedback and have found I had tried to flash my tablet with GT-P5110 software when i actually have a GT-P5113TS. I have found the firmware but my issue is when I download anything and extract it with using rar. I never get a .tar file or anything Odin can not recognize to select PDA and use.. What would cause that? How do I fix this?
Thank You
Learning76 said:
I appreciate the feedback and have found I had tried to flash my tablet with GT-P5110 software when i actually have a GT-P5113TS. I have found the firmware but my issue is when I download anything and extract it with using rar. I never get a .tar file or anything Odin can not recognize to select PDA and use.. What would cause that? How do I fix this?
Thank You
Click to expand...
Click to collapse
Try winrar or 7zip, it should extract, you need md5 or tar format in pda section. If not what error are you getting? There must be some file when you open the archive?
Basically when I download the zip file I want and then extract it to a specific folder. All I after unzipping is File folders with other file folders inside,Img, File, PROP, and SH. I never extract anything that is a Tar file or anything Odin can recognize when on PDA within Odin. Plus a lot of times I click on a link for a download off this site and it sends me to some watch-movies website. Not a actual download. Or I am just missing it.
Learning76 said:
Basically when I download the zip file I want and then extract it to a specific folder. All I after unzipping is File folders with other file folders inside,Img, File, PROP, and SH. I never extract anything that is a Tar file or anything Odin can recognize when on PDA within Odin. Plus a lot of times I click on a link for a download off this site and it sends me to some watch-movies website. Not a actual download. Or I am just missing it.
Click to expand...
Click to collapse
Maybe it's a bad link to your stock file then. Perhaps someone can give proper file link to the stock firmware. Inside the zip it's basically a md5 file for firmware to flash. Sadly I don't have a proper yoi will have to find of the net.
Hi guys
I wonder could anyone help me. I'm trying to flash a stock ROM on my s6 with ODIN. It goes so far and then fails on hidden.img I've researched it and the solution found here seems to have worked for most people. My problem is i cant get Odin to recognise the hidden.img.tar file - it just cant see it. I've tried all sorts of ways and i rename it as described and odin just wont recognise it in the right format. Please can someone help me? Just for the record what i do is:
The main image file i open with winrar. I get 8 files. i select the hidden.img file and extract and rename it as per the article. Odin i then select ap and point it at the location and it just wont find it. Odin 3.10.7 and windows 7 and windows 10
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
corkie1 said:
Hi guys
I wonder could anyone help me. I'm trying to flash a stock ROM on my s6 with ODIN. It goes so far and then fails on hidden.img I've researched it and the solution found here seems to have worked for most people. My problem is i cant get Odin to recognise the hidden.img.tar file - it just cant see it. I've tried all sorts of ways and i rename it as described and odin just wont recognise it in the right format. Please can someone help me? Just for the record what i do is:
The main image file i open with winrar. I get 8 files. i select the hidden.img file and extract and rename it as per the article. Odin i then select ap and point it at the location and it just wont find it. Odin 3.10.7 and windows 7 and windows 10
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
Click to expand...
Click to collapse
no need unrar that file... just flash that main image file at PDA section... that all... it should boot up like charm... ???
graphbyte said:
no need unrar that file... just flash that main image file at PDA section... that all... it should boot up like charm...
Click to expand...
Click to collapse
But i need to seperately flash the hidden image file thats the problem
corkie1 said:
But i need to seperately flash the hidden image file thats the problem
Click to expand...
Click to collapse
Can anyone help at all guys - im stuck without the phone
Hope this might help someone here.
I rooted my s8+ and basically got stuck with a soft-bricked phone, telling me I could only use official firmware etc etc. I was able to get the phone into download mode (eventually) but I wasn't able to flash anything including the stock Pie rom. I spent all night trying to find a solution to no avail and then found this, which I've edited a bit. And it worked. I've now got my s8+ back with Android 9 on it without any bloatware and it's actually better than ever. Thanks to Krolik301 for your help. I'm just hoping this may help someone.
1. Download the stock ROM and extract it.
2. Make a copy of the CSC file and rename one from the file type .md5 to .rar
3. Extract the PIT file from the CSC .rar file.
4. In Odin v3.13, make sure you add all four files from the extracted ROM (BL, AP, CP and CSC).
5. Click the PIT tab and add the PIT file that you just extracted from the CSC.rar file.
6. I the Options tab of Odin, make sure that Re-Partition, Auto Reboot and F.Reset Time are all ticked.
7. Click Start and hopefully you'll be back to your stock ROM
And please don't hold me responsible for any loss of data or a phone that still won't boot.
Hope this helps someone. Happy Easter
Muddyfunk said:
Hope this might help someone here.
I rooted my s8+ and basically got stuck with a soft-bricked phone, telling me I could only use official firmware etc etc. I was able to get the phone into download mode (eventually) but I wasn't able to flash anything including the stock Pie rom. I spent all night trying to find a solution to no avail and then found this, which I've edited a bit. And it worked. I've now got my s8+ back with Android 9 on it without any bloatware and it's actually better than ever. Thanks to Krolik301 for your help. I'm just hoping this may help someone.
1. Download the stock ROM and extract it.
2. Make a copy of the CSC file and rename one from the file type .md5 to .rar
3. Extract the PIT file from the CSC .rar file.
4. In Odin v3.13, make sure you add all four files from the extracted ROM (BL, AP, CP and CSC).
5. Click the PIT tab and add the PIT file that you just extracted from the CSC.rar file.
6. I the Options tab of Odin, make sure that Re-Partition, Auto Reboot and F.Reset Time are all ticked.
7. Click Start and hopefully you'll be back to your stock ROM
And please don't hold me responsible for any loss of data or a phone that still won't boot.
Hope this helps someone. Happy Easter
Click to expand...
Click to collapse
Hello. I'm helping someone on discord with this exact issue (the error code is "can't open the specified file (line 665)". I extracted the PIT file from CSC and placed it into the PIT file. I also put all of the firmware files in their proper place (except for HOME_CSC, as he wants to keep his files). Do I absolutely have to put the CSC file in place of the HOME_CSC file?