So I've been trying to unlock my Samsung Focus with ChevronWP7. I have followed >>this<< guide, step by step, but after I click both boxes and click on "Unlock", I get "Sorry, I'm having trouble communicating with the phone. Please make sure it's connected using USB. Please start the Zune application." So then I tried another guide(can't find the link right now), which included disabling the network, using WPConnect.exe, etc, but that didn't work either. I am completely at a loss of why this damn error keeps popping up. I restarted both my PC and phone numerous times, I've tried different USB ports and cables, but nothing is working. Anyone have any tips?
My OS version is 7.0.7390.0, Firmware Revision is 2103.11.3.3 and Zune version is 4.7.1404.0 if that helps at all.
Thank you, maxx.
I had same problem and I used the guide below and it worked on the first try. Most importantly was STEP 2 for me. Uninstalling Zune and using the version from the link provided in the guide at step 2.
[Tutorial] Unlock your phone; prevent relock & prepare for updates!
Well damn, it says my firmware isn't compatible with CWP7. I guess that and my Zune version is why it doesn't work. Is it possible to revert back to a previous firmware version?
try to downgrade to previous version (if possible) from zune.
If your phone came with NoDo (7392 or 7390) installed the only way to unlock at the moment is to flash a previous firmware version. Check the forums if there is one for your provider and phone.
If i'm not wrong you can checkwith Ansar's rom.
Have you resolved the problem yet? It seems there is something wrong with the "hosts" file. Generally, this file is in folder "C:\windows\system32\drivers\etc". Open it, delete all lines like "192.168.1.101 developerservices.windowsphone.com". Then, save it, try ChevronWP7 again in admin permission, it should be OK. If still not works, please send email to me, [email protected].
maxxdout said:
So I've been trying to unlock my Samsung Focus with ChevronWP7. I have followed >>this<< guide, step by step, but after I click both boxes and click on "Unlock", I get "Sorry, I'm having trouble communicating with the phone. Please make sure it's connected using USB. Please start the Zune application." So then I tried another guide(can't find the link right now), which included disabling the network, using WPConnect.exe, etc, but that didn't work either. I am completely at a loss of why this damn error keeps popping up. I restarted both my PC and phone numerous times, I've tried different USB ports and cables, but nothing is working. Anyone have any tips?
My OS version is 7.0.7390.0, Firmware Revision is 2103.11.3.3 and Zune version is 4.7.1404.0 if that helps at all.
Thank you, maxx.
Click to expand...
Click to collapse
maxx,
Chevron WP7 DOES NOT work with 7390 and above. As you have found out, the only option is to downgrade the firmware to an older version and then unlocking it. I tried searching and was not able to find it ( or I did not know what the hell I was looking for, HTC HD7 user here )
If your Focus came with a older version and you updated using Zune, you can try restoring
Open Zune--> Settings-->Phone-->Updates-->Restore
Try posting in the Samsung Focus forum. You might get some help.Good luck...
I have a problem. I just got my Android a couple of days ago and I really badly want to root it. I've tried multiple different programs and with each one the problem I get is "Waiting for device" in the cmd/terminal (Tried on multiple platforms: Vista, Win7, Ubuntu). I've tried installing drivers too and still didn't work (maybe the wrong drivers?).
Yes I realize that I am a "noob", but I really need some help here.
Got USB Debugging enabled ??
Got the correct upto date drivers ?
You navigated to the right location in ADB ??
azzledazzle said:
Got USB Debugging enabled ??
Got the correct upto date drivers ?
You navigated to the right location in ADB ??
Click to expand...
Click to collapse
>Yes
>I think so, not positive.
> What do you mean?
bumpp someone help?
Well Redownload the drivers and see if that helps, You could try Hasoon2000's All In One Kit to help with this. http://forum.xda-developers.com/showthread.php?t=1604677
As for ADB, (Android Debug Bridge) you should have this already, You need it to get unlock the bootloader and flash superboot (root) http://forum.xda-developers.com/showthread.php?t=1583427
Be sure to check out those links and also look at my FAQ section http://forum.xda-developers.com/showpost.php?p=24884624&postcount=3
I have all the files that it says are necessary to unlock the bootloader. It's just when I type "fastboot oem get_identifier_token" it just sits there saying "waiting for device".
I've tried hansoon's all in one program as well and it didn't work either.
Well that means it cannot find your phone, So the issue lies with the drivers and/or the location from which the command prompt is opened..
Put all of the files into 1 folder called android or adb and move that 1 folder to the root of your C Drive..
This should make navigating easier. Also, In that folder should be adb.exe and fastboot.exe do you have these ?
I fixed this by just playing around with it a bit more. Thanks for the help, though.
infam0us me said:
I fixed this by just playing around with it a bit more. Thanks for the help, though.
Click to expand...
Click to collapse
what exactly did you do? I am stuck with this problem for a long time now. nothing seems to help. what does "playing around" mean?
windows 8.1
htc one s (c2)
morphication said:
what exactly did you do? I am stuck with this problem for a long time now. nothing seems to help. what does "playing around" mean?
windows 8.1
htc one s (c2)
Click to expand...
Click to collapse
Well man, I really wish I could help you out because I remember how frustrating this was for me. This post was 2 and a half years ago though. Just really make sure that your drivers are up to date. If I could remember my exact solution I would help you out for sure.
infam0us me said:
Well man, I really wish I could help you out because I remember how frustrating this was for me. This post was 2 and a half years ago though. Just really make sure that your drivers are up to date. If I could remember my exact solution I would help you out for sure.
Click to expand...
Click to collapse
ok. it was windows 8 not allowing unsigned drivers to install properly. note: not "not installing at all", but "not installing properly". meaning: htc drivers installed somehow, so I was able to see the device and copy files around, but it was not enough for flashing roms.
so I started this guide to disable driver signature:
https://www.youtube.com/watch?v=gmw86KplqmU
... but my laptop is a business laptop and this guide demands BitLocker key if hard drive is encrypted (mine is). I also have a windows 7 desktop machine. So I decided to go the easy and quick way of simply doing flashing on my desktop computer. Windows 7 worked like a charm. But I'm sure the guide above would've helped as well. If somebody tries that, please post results.
Before anyone tells me to use the search, I already did. There is no forum for my phone specifically, and what few posts I have found that even remotely relate to my issue have been dead for over 3 months and I was not sure how you felt about resurrecting them.
Phone info: LG Venice (LG-LG730), Carrier: Boost Mobile, OS: Android 4.0.4
What I have done so far: I was on another help site(so far not so helpful) and several people have reported success in rooting their Venice following THIS tutorial. I have had no luck following said tutorial. Every time I get to the part where it shows the "restore, yes or no" part (can be found at 13:50 in the video tutorial), and when I click yes to restore, the phone says "starting restore.... restore finished" or something similar, but never actually reboots, and nothing shows up in the CMD window. Now I know that I have never set any encryption passwords, and I verified that these options were turned off in the phone settings.
I have also tried Super One Click, for what its worth, and keep getting stuck on "step 7: waiting for device"
If anyone has any information on how I can easily root this phone, I would be most appreciative. I say "easy" way because I AM totally new to rooting and I don't want mess something up. I apologize ahead of time if I posted this in the wrong area.
Thank you in advance.
L3
L3thal1ty said:
Before anyone tells me to use the search, I already did. There is no forum for my phone specifically, and what few posts I have found that even remotely relate to my issue have been dead for over 3 months and I was not sure how you felt about resurrecting them.
Phone info: LG Venice (LG-LG730), Carrier: Boost Mobile, OS: Android 4.0.4
What I have done so far: I was on another help site(so far not so helpful) and several people have reported success in rooting their Venice following THIS tutorial. I have had no luck following said tutorial. Every time I get to the part where it shows the "restore, yes or no" part (can be found at 13:50 in the video tutorial), and when I click yes to restore, the phone says "starting restore.... restore finished" or something similar, but never actually reboots, and nothing shows up in the CMD window. Now I know that I have never set any encryption passwords, and I verified that these options were turned off in the phone settings.
I have also tried Super One Click, for what its worth, and keep getting stuck on "step 7: waiting for device"
If anyone has any information on how I can easily root this phone, I would be most appreciative. I say "easy" way because I AM totally new to rooting and I don't want mess something up. I apologize ahead of time if I posted this in the wrong area.
Thank you in advance.
L3
Click to expand...
Click to collapse
FWIW I just rooted both my and my wife's LG Venice phones.
I used http://forum.xda-developers.com/showthread.php?t=1886460 and then method 3 instead of 1 which has worked for others.
android 4.0.4
kernel 3.0.8
build IMM76L
software LG730ZV5
I did try method 1 first and it may be that the two need to be stacked for all I know at present, I will be resetting one phone to factory and trying fresh with method 3 as soon as her 8g SD is ready to go.
I've tried using different versions of Bin4ry's root and none of them work. Im running 4.0.4
Sent from my LG-LG730 using xda app-developers app
Leviathan9569 said:
I've tried using different versions of Bin4ry's root and none of them work. Im running 4.0.4
Sent from my LG-LG730 using xda app-developers app
Click to expand...
Click to collapse
On a friends phone, also a Venice (boostmobile) we had some insanity as described below.
The final root check stalled, and we finally stopped the script that was waiting for something for most of a day.
A quick check from the ADB said we had root, and I could get the # prompt and do what I wanted, see the supersu and busybox from the rooting, etc..
Two reboots later, after adding titanium backup, supersu, and stericson-busybox from the play store (or what ever the name is today) everything went swimmingly, and even the problems I had noticed with some audio and video codecs not working had resolved themselves.
I am not sure what version of the rooter from bin4ry we used on mine and my wife's, but on our friend's we used the newest at the time he downloaded which was v25
Alright, i'll try it out. Thank you
You wouldn't by chance have the file on hand would you? I can't seem to find v25
Sent from my LG-LG730 using xda app-developers app
Root Issues Lg 730
:cyclops: Hi XDA... I have an issue also with the Lg730 Venice or (Sol) I have a repeat client that is always coming up with new phones, and keeps me busy rooting, custom flashing, (in general Modding) all his little toys.. I rooted his Lg 730 last yr with adb (Ubuntu12.04) by using the usual push/mount/chmod/install.. This system has worked for me many times, including but not limited to Clone S3's , Clones S2(Chinese) Droids of all flavors, yet with this New OTA 4.1.2 my client lost the previoius Root (I did not flash CustomRom at that time) . I have SERIOUSLY ,tried every method that I know of. Binary's(thanks Binary) which i have used a few times(Donator here) does not seem to work this time. GingerBreak/Psneuter/Fastboot/Rageagainsthecage/Odin/Heimdall (yes i even tried Samsung designs) Nothing works on this new OTA for me. Upgraded to RaringRingtail thinking i was out of date , to my dismay Nothing... I cannot get Root. Fastboot does not pickup device(all drivers in place(Ubuntu/Windows) My biggest challenge ever. I BOUGHT this phone (not because i like it) but for personal reasons. There is limited support for this device. I would like those who read this forum to know, that I AM going to dedicate my spare TIME on the Lg730 Venice from this day on. I have reset BoostMobile Factory settings , taken the stock boot.img , pulled the system, , rooted it, busybox'd it, with run support, zipaligned, added a couple of my favorite apk's,changed the bootanimation, zipped it,(7zip)... Essentially STOCK, with ROOT... I cannot run this on my Device(NO ROOT) but if any1 is interested its ready for flashing... I AM IN NO WAY RESPONSIBLE IF YOU BRICK YOU DEVICE... I will speak to a Moderator before i post link so as to get XDA Forum rules advice first. I take no credit , and i give it all (J.Rummy) (Chainfire)(XDA Developers)(Dsixda)(Koushik Dutta)(Exploid-Crew)for without them many things could not be possible....
Leviathan9569 said:
Alright, i'll try it out. Thank you
You wouldn't by chance have the file on hand would you? I can't seem to find v25
Sent from my LG-LG730 using xda app-developers app
Click to expand...
Click to collapse
I do not have it on hand, and we both semi-accidentally OTA upgraded to jellybean when the prompts got too annoying and lost root all together.
IF you manage to achieve root, best to use OTA rootkeeper BEFORE you upgrade, looks like now I have to use kdz tools and downgrade to v5, root, rootkeeper, and hope I can keep root :/
---------- Post added at 10:48 PM ---------- Previous post was at 10:17 PM ----------
X-Modder-X-Root-Seattle said:
:cyclops: Hi XDA... [deletia] I have reset BoostMobile Factory settings , taken the stock boot.img , pulled the system, , rooted it, busybox'd it, with run support, zipaligned, added a couple of my favorite apk's,changed the bootanimation, zipped it,(7zip)... Essentially STOCK, with ROOT... I cannot run this on my Device(NO ROOT) but if any1 is interested its ready for flashing... I AM IN NO WAY RESPONSIBLE IF YOU BRICK YOU DEVICE... I will speak to a Moderator before i post link so as to get XDA Forum rules advice first. I take no credit , and i give it all (J.Rummy) (Chainfire)(XDA Developers)(Dsixda)(Koushik Dutta)(Exploid-Crew)for without them many things could not be possible....
Click to expand...
Click to collapse
I would be interested in your theory cyclops. Possibly even in using yours over mine.
I am currently playing with doing much the same thing on a .cab formatted ROM then using the KDZ tool to push the modified v8 ROM (Jelly Bean 4.1.2) and pray I am good as I was when I was a kid
LG730 Venice
Unfortunately i have been unsucessful in Rooting this LG. Very frustrating.. I hope you achieve your goal. Best wishes.... I have also provided an email i can be contacted at directly [email protected] If this helps, and if you are able to sideload, or able to flash its ready to go.
.EDITING EDITING
Sucessfully rooted LG Venice 730 today ...... Whoo Hooo......... Flash regess from JB ZV8 to ZV5 or 6 with KDZ tools........ Rooted with Binary's new v31 and ran #1.... Remember to put Binary's root method on Root of C: drive. open command prompt c:.\RunMe and follow instructions....... Unfortunately I am unable to flash roms or mods due to ootloader Lock??????????
Its a pity .... 1 downfall after another......... Cant get past it .... Bootstrap or Safestrap maybe ??????/Any suggestions ?????
Rooting instructions
L3thal1ty said:
Before anyone tells me to use the search, I already did. There is no forum for my phone specifically, and what few posts I have found that even remotely relate to my issue have been dead for over 3 months and I was not sure how you felt about resurrecting them.
Phone info: LG Venice (LG-LG730), Carrier: Boost Mobile, OS: Android 4.0.4
What I have done so far: I was on another help site(so far not so helpful) and several people have reported success in rooting their Venice following THIS tutorial. I have had no luck following said tutorial. Every time I get to the part where it shows the "restore, yes or no" part (can be found at 13:50 in the video tutorial), and when I click yes to restore, the phone says "starting restore.... restore finished" or something similar, but never actually reboots, and nothing shows up in the CMD window. Now I know that I have never set any encryption passwords, and I verified that these options were turned off in the phone settings.
I have also tried Super One Click, for what its worth, and keep getting stuck on "step 7: waiting for device"
If anyone has any information on how I can easily root this phone, I would be most appreciative. I say "easy" way because I AM totally new to rooting and I don't want mess something up. I apologize ahead of time if I posted this in the wrong area.
Thank you in advance.
L3
Click to expand...
Click to collapse
I have tried to use this page/post to root my LG 730 Venice (Android 4.1.2 Software LG 730ZV8). I have downloaded & installed everything but keep getting ERROR messages at the end. Does anyone have detailed instructions on how to install/use bin4ry v31.zip ??
I am almost sure that it would eliminate these errors. I have been using Linux now for over 10 years and this process should be child's play.
Thanks in advance for any help.
Not much info to go on Mike , but here goes, first but not least...... LG730ZV8 package is not rootable.... You need to first downgrade from the LG730ZV8 to LG730ZV5 using LG Tool 500 method... (.cab format from here--> ) http://csmgdl.lgmobile.com/swdata/WDLSW/LG730/ABMUSV/LG730ZV5_01/LG730ZV5_01.S5_00.P61009.cab ... Follow instructions to the letter, and do not miss any steps....... I think its an easier way using the tools but if your a DIY kinda guy , the KDZ method is a little more complex , but rewarding in the end , more so than The 500 Tool simply said , because if your a little like me, i flash many different OS's for the fun of it, and the KDZ method will truely always work when the Tool wont..... Now the KDZ method you can find Here --------------->----------->---------------------->-----------------------------------------------------> http://forum.xda-developers.com/showthread.php?t=1287236.... If you have any problems or questions give4 a shout and i will try to guide you through it ...... Good luck Mike
Ps...... The trick to getting Binary's Root method to work is to put it on Root (c:\Binary.... etc...etc ) go to file press shift and right click to open cmd prompt... Type c:\RunMe ... Choose method #1 restore twice ,reboot 3x and Rooted..
---------- Post added at 09:53 PM ---------- Previous post was at 09:23 PM ----------
X-Modder-X-Root-Seattle said:
Not much info to go on Mike , but here goes, first but not least...... LG730ZV8 package is not rootable.... You need to first downgrade from the LG730ZV8 to LG730ZV5 using LG Tool 500 method... (.cab format from here--> ) http://csmgdl.lgmobile.com/swdata/WDLSW/LG730/ABMUSV/LG730ZV5_01/LG730ZV5_01.S5_00.P61009.cab ... Follow instructions to the letter, and do not miss any steps....... I think its an easier way using the tools but if your a DIY kinda guy , the KDZ method is a little more complex , but rewarding in the end , more so than The 500 Tool simply said , because if your a little like me, i flash many different OS's for the fun of it, and the KDZ method will truely always work when the Tool wont..... Now the KDZ method you can find Here --------------->----------->---------------------->-----------------------------------------------------> http://forum.xda-developers.com/showthread.php?t=1287236.... If you have any problems or questions give4 a shout and i will try to guide you through it ...... Good luck Mike
Ps...... The trick to getting Binary's Root method to work is to put it on Root (c:\Binary.... etc...etc ) go to file press shift and right click to open cmd prompt... Type c:\RunMe ... Choose method #1 restore twice ,reboot 3x and Rooted..
Click to expand...
Click to collapse
:cyclops:
More Info
X-Modder-X-Root-Seattle said:
Not much info to go on Mike , but here goes, first but not least...... LG730ZV8 package is not rootable.... You need to first downgrade from the LG730ZV8 to LG730ZV5 using LG Tool 500 method... (.cab format from here--> ) http://csmgdl.lgmobile.com/swdata/WDLSW/LG730/ABMUSV/LG730ZV5_01/LG730ZV5_01.S5_00.P61009.cab ... Follow instructions to the letter, and do not miss any steps....... I think its an easier way using the tools but if your a DIY kinda guy , the KDZ method is a little more complex , but rewarding in the end , more so than The 500 Tool simply said , because if your a little like me, i flash many different OS's for the fun of it, and the KDZ method will truely always work when the Tool wont..... Now the KDZ method you can find Here --------------->----------->---------------------->-----------------------------------------------------> http://forum.xda-developers.com/showthread.php?t=1287236.... If you have any problems or questions give4 a shout and i will try to guide you through it ...... Good luck Mike
Ps...... The trick to getting Binary's Root method to work is to put it on Root (c:\Binary.... etc...etc ) go to file press shift and right click to open cmd prompt... Type c:\RunMe ... Choose method #1 restore twice ,reboot 3x and Rooted..
---------- Post added at 09:53 PM ---------- Previous post was at 09:23 PM ----------
:cyclops:
Click to expand...
Click to collapse
I went into the folder that I extracted the bin4ry file download to and found two other folders:stuff and z_rootkit.. Inside the "stuff" folder I found abd.exe & dlls, busybox, fastboot, glass, install recovery, root me.tar (Linux), rootkittablet.tar.gz Linux), su and superuser.apk.. Now some of the ERROR messages had references to ABD and missing .dlls which were apparently not installed. This where I believe this prog hung up but I have no idea why.
The other folder "z_rootkit" had getroot scripts (.sh) and usbux.ab. I am guessing but I am assuming these might be needed too.
When I extracted to folder bin4ry, there were no other instructions to install from these folders.
This why I was asking for an install instruction file to get all this done.
Hope this helps in the solution !!
Hi Mike ...:cyclops: This will help you out..... You have the right package I believe.. Not sure why its giving you the dll errors... that could possibly be SDK or ADB not installed correctly via path to directory... Check it. Possibly deprecated download file. Too many too list in Windows... Gotta love Ubuntu........ Try downloading Binary's Root by Restore again... open downloads , -> drag n drop file to local c (root) set permissions-> Unzip it . open File . press shift on keyboard while also right clicking pointer, and it will bring up command prompt . Type ( .\RunMe ) in prompt...... When it opens select # (1) follow prompts to Backup---> Restore---> ADB will reboot ---once----twice and android will upgrade ... Let it finish. (3) Third reboot pull plug ---> grant permissions to Superuser or SuperSU on popup... Rooted.... I am assuming you downgraded to LG730ZV5 or LG730ZV6 already....... if there are any problems , or if you have questions let me know......
What to download ??
mikeyatl10 said:
I went into the folder that I extracted the bin4ry file download to and found two other folders:stuff and z_rootkit.. Inside the "stuff" folder I found abd.exe & dlls, busybox, fastboot, glass, install recovery, root me.tar (Linux), rootkittablet.tar.gz Linux), su and superuser.apk.. Now some of the ERROR messages had references to ABD and missing .dlls which were apparently not installed. This where I believe this prog hung up but I have no idea why.
The other folder "z_rootkit" had getroot scripts (.sh) and usbux.ab. I am guessing but I am assuming these might be needed too.
When I extracted to folder bin4ry, there were no other instructions to install from these folders.
This why I was asking for an install instruction file to get all this done.
Hope this helps in the solution !!
Click to expand...
Click to collapse
Just got everything cleaned up and am now ready to do this thing. Went to KDZ but don't know which prog to download plus I don't have B2C on my LG730.
Please let me know where I might find everything I will need to get it done.
Thanks
Progress Rooting LGE 730
I wish someone would teach all the Windows people that they are dealing with a MF trash bin OS. I have been fighting Win Updates. getting MS Active Sync installed etc. I have never in my life seen such idioatic crap in my life, There HAS TO BE AN EASIER way to root an LGE 730 (Venice) phone. If someone has such info please let me know because using the KDZ method is maniacal at best, I am ready to trash this piece of CR** phone. It CANNOT BE THIS TOUGH TO DO !
mikeyatl10 said:
I wish someone would teach all the Windows people that they are dealing with a MF trash bin OS. I have been fighting Win Updates. getting MS Active Sync installed etc. I have never in my life seen such idioatic crap in my life, There HAS TO BE AN EASIER way to root an LGE 730 (Venice) phone. If someone has such info please let me know because using the KDZ method is maniacal at best, I am ready to trash this piece of CR** phone. It CANNOT BE THIS TOUGH TO DO !
Click to expand...
Click to collapse
:highfive: Its definately a tough model to crack for sure..... Mike check your PM........ :cyclops:
mikeyatl10 said:
I wish someone would teach all the Windows people that they are dealing with a MF trash bin OS. I have been fighting Win Updates. getting MS Active Sync installed etc. I have never in my life seen such idioatic crap in my life, There HAS TO BE AN EASIER way to root an LGE 730 (Venice) phone. If someone has such info please let me know because using the KDZ method is maniacal at best, I am ready to trash this piece of CR** phone. It CANNOT BE THIS TOUGH TO DO !
Click to expand...
Click to collapse
Use the app on this thread. LGPwn.apk. Follow my instructions at the end of the thread. If it works (which i confirmed) a simple thanks button click will do.
http://forum.xda-developers.com/showthread.php?t=2338816
Root
Crossvxm said:
Use the app on this thread. LGPwn.apk. Follow my instructions at the end of the thread. If it works (which i confirmed) a simple thanks button click will do.
http://forum.xda-developers.com/showthread.php?t=2338816
Click to expand...
Click to collapse
:cyclops: thanks for the link :good:
X-Modder-X-Root-Seattle said:
:cyclops: thanks for the link :good:
Click to expand...
Click to collapse
No problem
LGPwn.apk
Crossvxm said:
No problem
Click to expand...
Click to collapse
:victory:This LGPwn.apk is the bomb...... I very much appreciate this new JB root method..... Confirmed works on LG730 Venice.....:highfive:...... Deleted root ,installed LGPwn.apk ...... ran exploit...... ROOTED .....:highfive: Awesome for job well done :victory: Yeahhh.....:cyclops:
X-Modder-X-Root-Seattle said:
:victory:This LGPwn.apk is the bomb...... I very much appreciate this new JB root method..... Confirmed works on LG730 Venice.....:highfive:...... Deleted root ,installed LGPwn.apk ...... ran exploit...... ROOTED .....:highfive: Awesome for job well done :victory: Yeahhh.....:cyclops:
Click to expand...
Click to collapse
Don't forget the SuperSU app for the root binaries and superuser requests!
Is there any chance I can unbrick my LG Realm aka LS620. I rooted the phone with Kingroot and then deleted some Bloatware. Doing that I must have done
something to some vital system apps. Now my situation is as follows:
-cannot access any system settings(error message: Unfortunately, Settings has stopped)
-other apps like Contacts, Messaging, Gallery, E-mail give me the error message: Unfortunately, 'Appname' has stopped.
-phone still boots up
-since I cannot access Settings I can NOT enable "USB Debugging" or "Unknown Sources"
-since I cannot enable those, I cannot connect to a PC to use adb to sideload apks or install non Google Play Store apks like Towelroot
-I still can put the phone in "Download Mode"
-I performed a factory reset which did not fix the problem, actually it made it worse since the phone is not rooted anymore, as verified with Root Check
I tried to flash the phone using kdz and tot/dll files for the LG L70 which is a very similar phone but that gives me only errors. I cannot find the
firmware for the LS620 anywhere as apparently a lot of other people can't. I spent now more than 2 unsuccessful weeks on the internet trying to find a fix
for my problem. My thinking is that if I somehow could install Towelroot by maybe tricking the phone to thinks it is a genuine goole play store apk I could
then trie to root the phone again and re-install the Settings system apk.
At this point I am out of my wits, but I refuse to believe there is no solution. There are a lot of smart people out there and on this forum, the answer
must lurk somewhere. The simplest of course would be to find the firmware for the LS620. So, if you can help please respond and let me know. My apologies
for this rather lengthy post.
Thanks,
Joe
hey
it sounds like you are stuck but let me get some info together and I will try and help you out
Joewi said:
The simplest of course would be to find the firmware for the LS620. So, if you can help please
Thanks,
Joe
Click to expand...
Click to collapse
I found this stock firmware on net. I'm not 100% sure if this is for your device. Check once
http://shmpltd.com/forum.php?mod=viewthread&tid=667495&mobile=2
Sent from my Iris458Q using XDA Premium 4 mobile app
4shreyas said:
I found this stock firmware on net. I'm not 100% sure if this is for your device.
Click to expand...
Click to collapse
Yeah,
I knew this site. But before you can download anything you must register which I tried but was unsuccessful to do. Not all the Chinese text on the site is translated with Bing translator and becomes is kind of confusing. I could not find any reference to a firmware file in the link you posted. But thanks anyway for responding. --Joe
Deltax82 said:
it sounds like you are stuck but let me get some info together and I will try and help you out
Click to expand...
Click to collapse
Thanks, looking forward to it.--Joe
hey everyone, im new here, just got a Samsung s8+ last week. had it rooted and all working well until today, had problems so i went to reflash twrp and when was unticking auto reboot in odin i accidentally ticked "nand erase"..... and i didnt notice until it was too late.
Now i cant get into recovery mode, i can get to the download mode but it wont flash the twrp at all it keeps failing. all i get is a black screen with samsung logo when i try to start it up. i am downloading factory firmware as i write this and going to see if that'll flash. any help will be appreciated.
thanks in advance, hope this is the right place to post it.
Hey
If you can get to download mode,you just install the original firmware from smartswitch,I think you have that option to recover from that program,and install the original firmware.
Or just do it in Odin and find the firmware on SamM.
Lots of work for you,but thats the only thing I can come up with.
Then you have to root it again and everything with it.
PapaD78 said:
Hey
If you can get to download mode,you just install the original firmware from smartswitch,I think you have that option to recover from that program,and install the original firmware.
Or just do it in Odin and find the firmware on SamM.
Lots of work for you,but thats the only thing I can come up with.
Then you have to root it again and everything with it.
Click to expand...
Click to collapse
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
anonuser111 said:
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
Click to expand...
Click to collapse
How is it failing? Are you getting an error? Is Odin detecting your device?
anonuser111 said:
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
Click to expand...
Click to collapse
No worry
You just have to install Microsoft visual c++ 2008 x86,after you have done that,no more errors in smartswitch.
Try that,and let us know
Long time since I used Odin now,but try the first thing first
anonuser111 said:
Thanks for your help, i downloaded the following https://forum.xda-developers.com/galaxy-s8/how-to/sm-g955f-stock-odin-firmware-t3585022 they all seem to fail when i try to flash them, do i have to do something different to what you would do flashing twrp? any options need to be selected? any particular order? Also the samsung switch software wont install on wither my ma or pc (win 10) " THIS APPLICATION HAS FAILED TO START BECAUSE ITS SIDE-BY-SIDE CONFIG IS INCORRECT"[/]
thanks again sorry for my newbness lol
Click to expand...
Click to collapse
Morning Mate,
Smart Switch (and KIES on Win 10) requires some old stuff to work. Install Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) from https://www.microsoft.com/en-us/download/details.aspx?id=5582 My advice however would be to try and flash your carriers stock firmware with ODIN or if you want an easier way you can use KIES by doing the following -
- Install C++ 2008 SP1 from link above to get it to work on Windows 10
- Install KIES www.samsung.com/au/support/usefulsoftware/KIES/ - I'm in Australia so that's my closest but you can still get it from there no worries.
- Also select install 'unified driver' during install if you have not already installed Samsung USB drivers to your PC
- Fire up KIES and from the top menu select 'Tools' and from the drop down menu select 'Firmware Upgrade and Initialisation'
- Enter in your model number - for me it's SM-G955F (make sure model is all in CAPS or it will not work). Now it will present you with a S/N dialog box. This is the tricky part if your phone is bricked. Chances are you have not written down your serial number. You can get your serial number from the back of your phone towards the bottom in really small print, or you can get it from the box it came in from purchase if you happened to have kept that.
- Enter in the serial number and follow the instructions, it's easy as. This will install your stock firmware and you can start again. Provided there is no damage to the phone this method will always get you out of the proverbial as a last resort and it's faster than downloading firmware from updato.com or other places.
The fastest way is by using the SamFirm tool to download but it takes some knowledge and I have lost the link to where I got it (the link at XDA is dead now and refers you to updato.com). The method with KIES above will always work, is fairly fast and pretty easy for the newbies or experienced alike.
Hope this helps, let me know if you need any more assistance :good:
Thanks heaps mate, im also in australia too. have installed all the software and is updating and installing as i write this, all seems to be going well so far, thank you so much your a life saver i was starting to worry as wtf i could do with this brick haha i will keep you posted and let you know if i have nay problems. Thanks to everyone else for their help and contribution this forum is awesome. What would you recommend in regards to rooting the phone again use the twrp recovery and magisk-v14.0 root?
thanks again
I was just about to write a post about how it wouldnt work.... twice in a row it kept failing when it went to install and initialize... 3rd time lucky it ****ing worked! i have a stock phone now all working sweet. Thanks so much to everyone you guys are literally lifesavers!
LEGENDS! Happiest man alive right now.