Hello friends, I have been looking at several posts and can not find concrete help with my galaxy tab the first time I received it applies a version rom JM6 but loading multimedia content while reading gave me an error. I did the same a second time and entered the tab to send her to state brick sat and after a month I came back from the phone company that sold me, but it comes with company logos and see that you have removed many tab brings things to the factory original. goes a bit slow. I should mention that my tab is Colombia / Latin America but unfortunately there is nobody here to give me guidance, my data are tab
PDA: P1000NURJK3
PHONE: P1000NUBJK1
CSC: P1000COMJK1
I went to the website but I do not see SAMFIRMWARE original ROM that is compatible with my GT, I also read that some ROMS that page does not support the Tablet as they bring some security ... truth is not far from the tablets with android so if anyone can help me be grateful ... when I try to update by Kies tells me that my device may not be updated .. would leave the original frabic without the things that removes the operator .. Please someone help me to know what the ROM should I install my TAB .. and I explain it right steps to not let it flash again in brick and have to send back to the SAT
Related
I was looking at this thread
http://forum.xda-developers.com/showthread.php?t=1103399&page=147
trying to figure out a root for my phone. it was recommended to me by someone on the androidforums.
so when i read the thread i see where everyones model number is i9100
my specs says this
model # shw-m250k
firmware version 2.3.3
baseband version m250k.ee17.1456.kt
2.6.35.7.m250k.ee31.1419-cl213937
build number gingerbread.ee31
my phone says galaxy sII on the box, on the manual and when you power it up, but the model numbers dont match.
i bought my phone in korea a few days ago from an olleh store. i am in the us army station here and want to use the phone on the verizon network when i get back to the u.s. next year.
s2 rooting
Hi all, Im totally newbie to this so I start reading a root guide here in order to do it on my phone. After reading I been able to find the firmware I should use but when go to my phone and look at the specs I find that some differ from the ones posted
My config is (by pressing *#1234#):
PDA: I9100XWKF3
PHONE: I9100XXFK1
CSC: I9100OJVKF1
I would like to now if I use the files (http://forum.xda-developers.com/showthread.php?t=1075278) under the XWKF3 section it will work for me ?
I want that my phone had Spanish and English language (as now) and want to make sure it will, also would like to know if with the "FOP" file and the "XWKF3 Stock Kernel" it is enough in order to root it ?
Sorry for the long question and please if someone knows or have a similar config and was able to root the device let me know.
Thx in advance.
Wouldn't both these posts be better served in the Samsung galaxy SII forum??
well, the forum will not let me post there until i have 10 posts.
2452sgtb said:
Wouldn't both these posts be better served in the Samsung galaxy SII forum??
Click to expand...
Click to collapse
neither do i
My phone one is on stock firmware finally. In download mode it confirms that. It also confirms that current binary is Samsung Official. Do I need to worry for my phone getting bricked doing a complete software reflash in a Samsung Repair Facility? I'm asking because the phone says custom in about phone and I do know that it can mean just that the phone had more images flashed to it. I rooted with Kingroot about a month ago and since then I have been trying to get my phone like how it comes fresh out of the box. I have been going crazy since then and I'm posting this question now being that I will be able to visit one of Samsung's Repair Facility's in a few days. It's the Grand Prime with model # SM-G5030AZ. Please can you fellows who know much more than me help me with my dilemma. Thank you.
About another stock firmware
I don't have one more is it available anywhere and believe me I did the research. I think your first option is something I'll give a try but if it doesn't work I'll try the last one. Thank you very much for your time as it is much appreciated.
Hi there,
You'd be best served asking for help from the experts who own your device, here:
Galaxy Grand Prime Q&A, Help & Troubleshooting
Good luck
This is my first post and am completely new to smart phones, and have got out of my depth. I bought a new Samsung S2 i9100 from China about 6 months ago. The GPS stopped working (something I discover from another thread here, is not uncommon), and I tried to update the firmware using Odin.
This failed and the phone is now soft bricked as I understand it, as I learnt from another thread here (http://forum.xda-developers.com/galaxy-s2/help/how-to-replace-chinese-firmware-t1192575 ) that Chinese Samsung phones cannot be flashed with European firmware.
I have looked on samsung.com and Sammobile and the original firmware is not listed anywhere (I9100ZCKG4). I have tried installing, using Odin, CWM Recovery and the stock firmware listed on samsung.com for China, but both fail.
I have read the thread on this site on this issue and following suggestions from here this takes via Chinese sites http://bbs.gfan.com/android-2099143-1-1.html and then I eventually end up at http://bbs.gfan.com/android-4920184-1-1.html where I think there is a link to the firmware I9100ZCKG4. The link takes me to http://115.com/5lb/ and neither myself of Google translate are unable to make any sense of this page, and I cannot get any further.
The other problem is that I think I enabled USB debugging before starting ,but now cannot be sure.
Maybe I have learnt and expensive lesson, but any help would be most welcome, especially if expressed in terms a beginner is likely to understand.
iankestin said:
This is my first post and am completely new to smart phones, and have got out of my depth. I bought a new Samsung S2 i9100 from China about 6 months ago. The GPS stopped working (something I discover from another thread here, is not uncommon), and I tried to update the firmware using Odin.
This failed and the phone is now soft bricked as I understand it, as I learnt from another thread here (http://forum.xda-developers.com/galaxy-s2/help/how-to-replace-chinese-firmware-t1192575 ) that Chinese Samsung phones cannot be flashed with European firmware.
I have looked on samsung.com and Sammobile and the original firmware is not listed anywhere (I9100ZCKG4). I have tried installing, using Odin, CWM Recovery and the stock firmware listed on samsung.com for China, but both fail.
I have read the thread on this site on this issue and following suggestions from here this takes via Chinese sites http://bbs.gfan.com/android-2099143-1-1.html and then I eventually end up at http://bbs.gfan.com/android-4920184-1-1.html where I think there is a link to the firmware I9100ZCKG4. The link takes me to http://115.com/5lb/ and neither myself of Google translate are unable to make any sense of this page, and I cannot get any further.
The other problem is that I think I enabled USB debugging before starting ,but now cannot be sure.
Maybe I have learnt and expensive lesson, but any help would be most welcome, especially if expressed in terms a beginner is likely to understand.
Click to expand...
Click to collapse
Hi,
Thanks for using XDA Assist. I see that you have found your devices forum.
Post your query in > Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting
Or in the friendly > Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting > [Q&A][SGS2][Newbies][Experienced Users][RCs] New members friendly
The experts there may be able to help you.
Hello there!
I am using Rooted Samsung Galaxy S4 (GT-I9505), since a month. Everything was working fine, until I came to this: No Sim ERROR
I have been using the cellular network for a month, and now suddenly, it prompts "No sim".
I have not tried any custom ROM.
Some relevant details are:
Baseband version: I9505XXUHOG1
Android: 5.0.1
Build Number: LRX22C.I9505XXUHOG1
Device Type: jfltespr
PDA Version: L720VPUAMDC
CSC Version: L720SPTGOD2
Now, either guide me about a way to get through this, or incase, final solution is installing Custom ROM, then please provide me a proper and active link of one (suitable for my device) and some necessary precautions, as it would be my first time, if it needs to be.
Guyz, please help ASAP, i m stuck, and cant use my Dialer anymore!
Thanks.
Hi !
I`ve found these threads
https://forum.xda-developers.com/ga...ow-to-fix-galaxy-s4-sim-card-removed-t3113480
https://forum.xda-developers.com/galaxy-s4/help/sim-card-sim-card-removed-errors-galaxy-t2932778
Have a look at them and there are even more like that here
Good luck !
Thanks, but nothing works for me!
xanthrax said:
Hi !
I`ve found these threads
https://forum.xda-developers.com/ga...ow-to-fix-galaxy-s4-sim-card-removed-t3113480
https://forum.xda-developers.com/galaxy-s4/help/sim-card-sim-card-removed-errors-galaxy-t2932778
Have a look at them and there are even more like that here
Good luck !
Click to expand...
Click to collapse
Nothing is brief so far!
I have tried many things (roms) and ended up with the so-called best one, CyanogenMod but no fruits. Please help me get it back. I am currently in a GSM area but my phone (Galaxy Sprint S4 (SPH-L720) supports CDMA, and after all the research and time I spent on this issue, I am sitting with no proper solution.
Please Help.
Thanks.
Hello all,
I'm in a jam and hope someone can help. I have an older Samsung table, a Galaxy Note 10.1 (2014 edition) and I am trying to remove root in order to be able to receive OTA updates again. I have used various apps to try and remove root but they have only removed small pieces and the device is still showing up as rooted/modified, even after performing a factory data reset...it is still showing as rooted.
The biggest problem is that the device is so old that I cannot find the original firmware in order to flash it back to stock in Odin. I have looked EVERYWHERE on the internet but all links to the older firmware have expired or been removed. I even tried calling Samsung tech support but they were no help at all. I then even got desperate and tried calling a local BestBuy to ask for help from their Samsung Reps and Geek Squad, but none were any help. So now my last resort is to reach out to the Android community.
So, as much as I hate to bother you guys, do any of you out there still have an old stock rom/firmware for the Verizon (wifi only) Samsung Galaxy Note 10.1 tablet (SM-P600P)? If so, PLEASE SHARE IT. That would be greatly appreciated. Many times I have hit a road block where no tech support anywhere could help, but you guys here at XDA have still come through when no one else could. You all have been lifesavers in the past, so I hope someone can help me this time as well.
Thanks in advance guys for any help that you can provide me. I've tried every website I can think of but keep coming up with nothing (e.g. I've tried Sammobile, Samsung, Kies, YouTube, here at XDA, etc.). Even if you can point me to a link that's still good where I can find the firmware myself, that would be great!!
Thanks again everyone.