Hey guys, I have my old Orbit 2 (Polaris) car mount in my car for use with my ne DHD (which is an absolute perfect, tight, unobtrusive fit btw!). I have a usb charging cable and phono-to-phono cable hooked up behind my dash to allow for charging and audio through my car stereo. Thing is the calls arent great for the other caller (I have to put on loudspeaker for the caller to hear me speak), possibly due to sensitivity of the DHD mic.
Anyway, I was wondering does anyone know where I might get a good long AUX + mic cable such as the one that comes with this car holder ... http://www.griffintechnology.com/products/windowseat-handsfree
I want to see if this will have a better mic sensitivity and pick up my voice better while driving.
fubofo said:
Hey guys, I have my old Orbit 2 (Polaris) car mount in my car for use with my ne DHD (which is an absolute perfect, tight, unobtrusive fit btw!). I have a usb charging cable and phono-to-phono cable hooked up behind my dash to allow for charging and audio through my car stereo. Thing is the calls arent great for the other caller (I have to put on loudspeaker for the caller to hear me speak), possibly due to sensitivity of the DHD mic.
Anyway, I was wondering does anyone know where I might get a good long AUX + mic cable such as the one that comes with this car holder ... http://www.griffintechnology.com/products/windowseat-handsfree
I want to see if this will have a better mic sensitivity and pick up my voice better while driving.
Click to expand...
Click to collapse
You need something like this:
http://www.kvconnection.com/product-p/009-243.htm
The price on this one is a rip-off but that's basicaly what you need to get it running. Plug it in the phone, then plug the cable you already have installed in the headphones output and you need to buy a good quality microphone, plug it in the other female connector and then install it in your car so it can pick up your voice.
Or if you don't use your stock headphones and you are good with the soldering gun, you can buy two female 3.5mm stereo connectors, cut the headphones cable and make the y-cable yourself. Or even use the headphone's microphone and install just one female jack, connected to the headphones' cables. You can try if the headphones' mic will work - just plug them in, point the microphone to yourself where you intend to install it, start the engine and call someone.
Related
I'm on my second Audio adapter from Pocket PC Techs: http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT01. The first one would sometimes only play the left or right speaker and I'd have to jiggle the wire on the adapter for it to play properly. I returned this for a second one which worked fine up until last week when it started to pop the speakers in the car when the slightest jostling of the wire occured (hitting bumps). I've got it connected to the XDA 2 and then to a cassette adapter with 3.5mm jack in the car. The cassette adapter works fine on the iPAQ H3970 and the XDA 2 works perfectly with the included stereo headset. Another problem with the PPCTechs audio adapter is that the microphone doesn't work in the 2.5mm headset jack part.
I know there are people out there who have canibalized their included stereo headsets to make audio adapters and also people who have made their own USB adapters with audio out capabilities. Is anyone interested in making one for me?! I can send a canibalize-able stereo headset with the proper audio jack if needed.
I would like either:
- A modified stereo headset cable with microphone that connects to a female 3.5mm stereo headset jack.. or directly to a car cassette adapter.
...or...
- A serial port connection that can output stereo audio to a 3.5mm female audio jack, includes a microphone or 2.5mm mono headset jack, and provides charging capabilities.
I imagine the former choice would be easier, but none of my local electronics repair shops want to do it and I don't have the tools or experience to do it right. The latter would be nicer. I'd buy a car kit, but I havn't seen any that work with the XDA2 and provide audio out that can connect to the car stereo. I want both stereo music/movies to be played in the car stereo speakers as well as GPS navigation commands and (sometimes) phone calls... and I want Voice Command to work (hence the need for a microphone)!
Please PM me with costs if some one can do this for me.
Adamz- Did you push in the connector from the Audio all the way in? I used the handsfree set ( supplier with MMDA II) and it was not working properly and was also loose until I found that you have to really push it firmly.
I am suprised if you did do that and it still does not work as you said it has all the connectors
I am also looking for a similar solution using the same principle. The other sync input I use for mt GPS connector/ charger . was going to try the Audio adaptor that you are using with a mute box through to a speaker .
Can any one help?
Adamz:-
Did you read this topic?
Maybe this might work for us.
http://forum.xda-developers.com/viewtopic.php?t=5061
http://www.mobiles.co.uk/images/accs/safetalk.jpg44
:lol:
Nah, I want stereo quality music to be played in the existing speakers in my car. I also want GPS navigator instructions to be played in the car stereo as well as phone calls. I've got a Bluetooth GPS reciever, so I don't really need a serial connection.
The PPCTechs adapter is fully inserted into the audio jack, although sometimes pushing it too far makes it stop working as well! But if I jiggle the wire, sometimes it does work... then if I hit a bump, maybe it will stop working.
I'm thinking the USB Cradle with Audio might be good. If that's got a 3.5mm female stereo jack in the back, I can plug the casette adapter into that. Plug the USB into a cigarette lighter adapter... and that should be all set sinc the Audio USB cradle supposedly has a microphone in it.
Those don't seem to be available yet though.
Found this on the net
http://www.boostaroo.com/products.html
I am wondering if it is possible to use the USB connection on the Tilt for attcahing it to external speakers. Is there any audio output directed throgh the USB port?
If not, can anyone recommend a blue tooth device that will allow communication from the Tilt and end up into an Ipod style jack that I can then plug into the Ipod port of the stereo system in my truck? (No factory blue tooth.)
Thanks to all.
AndyInFl said:
I am wondering if it is possible to use the USB connection on the Tilt for attcahing it to external speakers. Is there any audio output directed throgh the USB port?
If not, can anyone recommend a blue tooth device that will allow communication from the Tilt and end up into an Ipod style jack that I can then plug into the Ipod port of the stereo system in my truck? (No factory blue tooth.)
Thanks to all.
Click to expand...
Click to collapse
Tilt's USB port has audio out. I use 8525's usb headset that I had laying around to listen to songs at work.
Thanks for the reply!
I will try to find a headset. I can then cut the headphones and attach an audio input instead of the earphones.
Can you recommend a brand other than the factory set?
Also, would anyone know where I can find the USB port layout?
Thanks again to all.
I cut the usb plug off my old htc herald headphones and put a 3.5mm jack on the other end. I then bought a cheap mp3 dock with speakers. Plug the usb jack into the tilt and the 3.5mm into the dock. The sound is pretty darn good. The dock works off 4 aaa batteries and gives me 8 hours of tunes. heres a pic with my old mda in it, it works just fine with my tilt also.
Someone should make a HTC dock with speakers that runs off batteries so its portable. I bet they could sell a few.
Adapters for the Tilt/8925 are available all over the web. USB on one end, 2.5mm or 3.5mm on the other. You can get them for 6 bucks here: http://www.tiltdepot.com/
adapter
I have a kaiser and just got the usb to 3.5mm adapter for 7bucks. I have a tape deck in my car so I bought a ipod tape to 3.5mm adapter now I have music and can run tomtom too even at the same time through the car speakers. I like that dock too!
Hello!
When I plug my Touch Pro into an active Adapt carholder the sound output of my touch is forced to the charger (no sound output anymore on my mobile).
Is there any way around this? Any registry setting?
Or maybe remove some of the pins from the mini-usb connector on the charger?
Try getting HTC's official dongle which plugs into the USB port and gives you several connectors;
USB for charging
3.5mm headphone socket
2.5mm mini-headphone socket
USB for HTC's original supplied headphones
If you use this, you can plug in headphones at the same time as charging. I use it to route sound through to my car stereo so I can use the phone as an MP3 player and Sat-Nav.
If you don't use the headphone sockets, sound still comes out through the main speaker on the phone.
Hmm I have one of those, but the car charger I use is a slide-in holder, so there won't be much room for the dongle
Microphone unuseable when plugged into stereo
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
I think it is because the phone thinks the headphones are plugged in and that I'd use the headphone microphone.
Does anyone have a tweak which would allow the phones microphone to remain in action when using the dongle?
Many thanks
rjbarrington said:
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
I think it is because the phone thinks the headphones are plugged in and that I'd use the headphone microphone.
Does anyone have a tweak which would allow the phones microphone to remain in action when using the dongle?
Many thanks
Click to expand...
Click to collapse
+1 to that... i would like to know a fix for that
I have a Brodit holder for my car (http://www.brodit.com/images/234542.pdf)
And i have the same problem, is ther any solution for this?
rjbarrington said:
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
Click to expand...
Click to collapse
I don't have that problem at all, my phone's microphone works fine while using the USB dongle with a 3.5mm jack plugged into it, connected to my car stereo.
Are you using HTC's official dongle, the one with the 3.5mm, 2.5mm USB power and USB headphone sockets?
It works fine for me!
Hey!
Anyone knows if it's possible to connect a external microphone in the 3.5mm jack. Would be nice to be able to plug in a better microphone when recording music shows etc. Shouldnt it be possible since you can speak through the htc-headset?
I don't think that you can plug a mic in it, this jack is "way-out" only, not "in"...
At least i never tried, but i guess it's how it works (if anyone can confirm this or prove me wrong ).
It's a 4 pin 3.5mm TRRS connector. It has a mic connector built in as well as the audio and ground.
I don't know if you can get a microphone with that specific connector, look it up and see... but it would be pretty easy to make your own connector if you cannibalise a headset or something like that and then connect whatever mic you wanted to that.
Not sure about the quality, but dealextreme sku.20714 seems like to fit your description.
I bought one of these some time ago to connect my Klipsch headphones.
http://cgi.ebay.co.uk/3-5mm-Headpho...GS-/280544944694?pt=UK_Mobiles_Accessories_RL
It is still recognised as a headset even when there are no headphones plugged into it.
So the quality for what you want is probably poor BUT it does prove that it can be done.
Perhaps one of these PLUS a good quality mic PLUS a soldering iron is the answer
I have been researching online about using car aux-in cable for making phone calls.
I heard that some phones work and some do not. In those cases, when it doesn't work, it means that the person in the phone cannot hear what you say, because by default the mic is muted when something is plugged in to the jack.
With HTC Sensation, does this happen? Is the phone mic muted when a headset/aux cable is plugged in to the phone? If yes, is there any workaround? What is the general solution to make phone calls via aux cable?
I heard that some people might use the griffin cable with mic, but since my aux port is located where the shifter is, I am not sure how the quality would be. Any idea?
Thanks
absolution8 said:
I have been researching online about using car aux-in cable for making phone calls.
I heard that some phones work and some do not. In those cases, when it doesn't work, it means that the person in the phone cannot hear what you say, because by default the mic is muted when something is plugged in to the jack.
With HTC Sensation, does this happen? Is the phone mic muted when a headset/aux cable is plugged in to the phone? If yes, is there any workaround? What is the general solution to make phone calls via aux cable?
I heard that some people might use the griffin cable with mic, but since my aux port is located where the shifter is, I am not sure how the quality would be. Any idea?
Thanks
Click to expand...
Click to collapse
well, i hope this answers ur question
i have made calls/received calls via aux (when im listening to music in da car n get a phone call i dont uplug it, just answer)
i talk thru the mic normally and i hear the other person from tha car speakers.
so i guess the mic is not muted
From previous experience - though not with Sensation, as I'm all blue-tooth now, the following was true
If you plug in a normal 3.5mm TRS jack (stereo headphone / line-in / etc) the phone detects it as headphones and not headset, so the device realised there was no "in-line" mic, and used the phone's microphone itself.
A better option (which I did) was to fashion my own lead - using another HTC headset, but removing the two earphones, and soldering the cables to an in-line socket. This worked well, because I had a microphone clipped to me, with remote control for music (don't want to touch the phone when driving now, do we!!) and the stereo audio feed back to the car speakers. Cost me about £3 in total, including the second headset.
I would imagine this to be the same for the Sensation too, as all these sockets have various detection mechanisms, to make the right things happen, depending on what you connect.
Good luck, and safe driving!