Database Info

[Q] Flashing kernel question

So im definatley new to rooting and have a quick question. I rooted using Z4, flashed djo5 modem, super clean rom and non voodoo kernel. When I flashed the stupidfast custom kernel it gave me a wierd looking boot screen. I think it flashed ok but in the about phone section it says kernel version 2.6.29 is it supposed to say stupid fast. Phone seems to work fine but not sure if kernel flashed right. Any feddback is greatly appreciated.

I am unfamiliar with that phone and firmware, but if everything works as it should I would say its ok, sometimes devs personalize installs like that, if you install voodoo lag fix for galaxy s the phone talks to you in sexy female voice during install.

[Q] Back to stock Telus Fascinate after flashing Darky 10

Hi,
I have a Telus Fascinate (T959D) that I've flashed with Darky's 10.0 "Final".
I've read countless threads that tell me NOT to flash bootloaders to this phone, but we were adventurous (I don't own the device, a friend does) and wanted to try the latest Darky on it since it was working beautifully on my GT-I9000M.
Sadly, Darky's ROM requires a different bootloader, and it comes from an I9000.
After following the guide to install Darky, it effectively puts an I9000 bootloader, kernel, and ROM on the phone. (Shame on me, I know).
OK, so the problems are:
1.) No way to get into download mode or recovery mode without booting completely and issuing a 'reboot download' or 'reboot recovery' from a su terminal (or adb)
2.) The home and search softkeys act like left and right instead
There are other Darky related bugs, but not important to this discussion.
My question is: What is the safest/most reliable way to go back to stock Fascinate, bootloader and all? At this point since we don't have access to download mode without the phone booting properly, we don't want to flash anything else unless it's going to give us download mode back.
I've read the guides on going back to stock, but they all say you needed to have flashed a certain Telus ROM before going custom, and I don't know what exactly this phone had on it for sure. My friend says it was whatever was the latest update from Telus, but he hasn't plugged it into Kies in a while so I couldn't confirm for sure.
The idea here is to go back to stock then flash a custom kernel and possible a different modem to help with battery life and signal problems, and possibly some custom roms that don't require changing the bootloader.
Any insight would be greatly appreciated. If any additional info is needed, I'll provide it.

Hey just curious if you ever solved this problem as i currently have the exact same problem with a different Rom it won't allow me to boot into recovery and cwm won't recover my nandroid

New here, E4GT Need some help

Hey guys, ok so I am coming from two HTC Heros (CMDA Sprint)
Was running cyanogenmod on both (me and the wife) loved it.
Now that I have the E4GT, I went ahead last week and used ODIN to install LoStKernel.
Now it did give me root and I have used apps like rom toolbox and setcpu.
My main problem is it seems these samsung devices are a lot trickier to tinker with.
Basically I am looking to get Clockworkmod so I can flash roms and make nandroid backups.
From what I have read, I need a kernel that supports and/or has CWM in it.
I tried flashing CWM with rom manager, and it installed - but I have no option to backup/restore I can only flash a zip or clear cache.
There are SO MANY things posted in the development section and I do not know which kernels are the latest, best etc.
I need:
a) CWM/busybox
b) overclocking support
c) FULL stock functionality (no loss of wifi or something stupid like that)
From what I am understanding the kernel is included with a rom. But I can't flash a rom without CWM. So I am rooted but stuck with stock rom and it's kernel.
Confused, lol!
Can someone point me to a proper thread to get me CWM and a well supported ROM to install? Can I get CWM working fully on the stock kernel/rom?
If someone can point me to the right direction, maybe I can find a developer to donate to lol!

No love?
At this point I'm just trying to get cwm. Seems I may have already had it just didn't know it came with lostkernel and now I botched it using rom manager.
Sent from my SPH-D710 using XDA App

You can actually flash a new kernel with CWM in odin
Thats the easiest method
There are several, as for the best I dont know yet
Im still tinkering with my setup

I guess that's my main issue - I can't find one that has CWM, everything I am seeing is a ROM that needs CWM to install.
If I had CWM I'd be all set because then I can backup my setup and try new things without worry, but I don't want to use ODIN to try a kernel that CWM won't take, or isn't there, and then lose what I have ya know?

All set, seems I flashed a kernel that wasn't what it was supposed to be. I apparently flashed his earlier version (pre-LoStKernel) that did not have CWM5 it it.
Just used ODIN last night to drop in LoStKernel and kept root, but also have CWM5 now. After clearing my SD Card, made my first backup. 1.5GB, jesus! lol. Nearly my whole SD card... yes, it's from my old Hero, so, time to get a 32GB.

[Q] NexusS (i9020T) hard bricked, at which step did I go wrong?

Hi everyone, I had a problem with my previous nexus s (I have since gotten a working replacement) and I was wondering where exactly I messed up so in the future I can avoid this
Here is what I did on my previous phone:
1. I flashed ics onto my device from the ota update package from androidcentral, it was 4.0.3. (This worked great and I had it on my phone for 2-3 months before I tried the next steps.)
2. I rooted my device successfully using the guide at nexusshacks.
3. I also flashed TWRP recovery (fastboot) and superuser using the above guide/links
4. When I would turn off my phone it would boot to a screen with a red triangle and an opened android bot. So what I would have to do is flash twrp recovery everytime I turned the phone on just to get it to work.
5. What I wanted to do was keep the stock rom but still have twrp recovery without it making me reflash it on every boot. So I clicked install and tried to flash the stock rom (update package from the link in step 1) with twrp recovery. It then turned off my phone and hard bricked it. I couldn't turn it on anymore and a new battery didn't fix it.
I was able to get a replacement now and I was just wondering at which step did I go wrong? I THINK that I should have wiped my cache before I tried to reflash the stock rom but maybe I'm way off base here. This is why I posted a question here so hopefully some of you guys can help.
I did think about posting in another thread, but I didn't wanna threadjack or anything... and his problem also seemed a bit different then mine. Also, sorry about not being able to provide the specific links it won't let me post them until I've posted 8 times.

I don't know for sure but team win recovery has been reported to corrupt the device's efs directory. I've even had problems myself using clockwork recovery. I've moved on to razor recovery and haven't looked back.
This is the most flash-friendly phone I've ever owned, and razor recovery rivals amon ra (which was awesome on my g1 and evo). I really think it may have just been the recovery you were using... Somebody correct me if i'm wrong.
Sent from my Nexus S 4G using Tapatalk

I had once corrupted one of the partition. I fixed to by flashing stock recovery and stock rom.
Use adam outler's unbrickable mod tool. It can be found in android development section.
Sent from my Nexus S using XDA

Thanks for the replies.
That's interesting about twrp... I didn't know that. Truth be told, the only reason I went for it over other ones like clockwork mod was because the UI looked pretty nice and easy to use. Also the guide I followed at nexusshacks used that, so I wanted to stay consistent with it.
jishnu7, it's a little late for that now however as I actually have already received a working replacement from my carrier, but in the future if something ever does go wrong (hopefully not) I will definitely check that out.
The main thing I'm wondering is if it messed up because I tried to reflash the stock rom essentially over top itself (was hoping that by doing that, it would stop making me reflash twrp on every reboot) or if it was because I didn't wipe the cache before the flash.
Also, what I really wanted to do with my phone was to keep the stock rom but be able to overclock my cpu/gpu. I was hoping I could set different overclocks for different things (I've heard of kernels where you can downclock your phone when the screens off and have it overclocked slightly while you're using it, that would be something I'd like to have). I figured to install those kernels I would have to root my phone, replace stock recovery and install superuser so that's why I tried to do that. Once again, I'm pretty new to all this stuff for my phone.

Sorry to bump this thread again, but I would really like to know how I could avoid what happened to me for the future. I think it's because I flashed the stock 4.0.3 rom over itself (was hoping that by doing that twrp recovery would stay on the phone after reboot).
What I would like to do is install something like CM9 or AOKP and use the Matr1x kernel so I could undervolt or overclock my phone.

I seriously dont get how u hard bricked your phone...
the reason you are thinking is you reflashed stock rom without wiping cache, as per my experiece its not at all the reason
now, whats my experience??
...I have some fault with my nexus device and I'm working on it,,and I did everything I could do...one of the thing out of those things was reflashing stock rom without wiping,and i did it quite a several times...my device never hard bricked,,however it was soft bricked for many times,,and i recovered from it
so reflasing a stock rom over stock rom, over ICS, over some themed custom rom,will not hard brick your device, you must be missing something none of your steps sounds suspecious
P.S:- pulling out battey while flashing something like this sounds suspecious, never tried though

I'm not sure what happened either to be quite honest with you. Since giving it another shot now with my new fresh phone I have had great success!
I did everything I wanted to do all in one go. Rooted it, install CWM touch, install AOKP (went with milestone 4 cuz I heard newest build 29 has some bugs) + gapps and installed matr1x kernel 18.5 bfs.
The only thing I did different from last time was installing CWM touch (instead of twrp) and flashed aokp this time (instead of reflashing 4.0.3 over itself).

I would just avoid step 2 at all cost.
The nexus s hacks dude is a tool.

[Q] I can't load CWM on my SGS 4G (T-Mobile)

Hello all,
Okay, I admit that I am gonna get a lot of "use the search tool first" replies, but please hear me out. I have done my fair share of searching. Its not that I haven't found anything, its just the things I found are useless for this SGS 4G. I really wanted to install Cyanogen Mo on the SGS (its not actually mine, a friend asked me to do it since he saw my old SGS GT-I9000 running CM).
I am gonna try and give a detailed report . The phone was originally from T-Mobile and now unlocked permanently. Its running firmware version 2.3.3 that I installed just recently. I found out that I can't install CWM on the stock kernel or bootloader or whatever and I needed a new of the thing. So I went on searching and searching....found a handful of help but none work. Every method breaks at some point and I go to the "firmware update failed" thing on the phone, which I then install 2.3.3 again using ODIN and try another method. I have tried a lot of things. Hemidall, ODIN, SuperOneClick, and a lot of gibbrish-sounding methods. None work. I am now running 2.3.3. Here are some infos:
ABOUT PHONE:
Model Number: SGH-T959V
Firmware Version: 2.3.3
Baseband Version: T959VUVKF1
Kernel Version: 2.6.35.7-T959VUVKF1-CL270364
Build Number: GINGERBREAD.VUVKF1
The files I used to flash to 2.3.3 using ODIN v1.85:
PIT: Hawk_Sidekick_VibrantPlus_831.pit
PDA: CODE_T959VUVKF1_CL270364_REV00_user_low_noship.tar.md5
PHONE: T959VUVKF1-Phone-CL1020302.tar.md5
CSC: SGH-T959V-CSC-TMB-VIBRANTP.tar.md5
I hope the above infos are enough. So, can anyone help me and point me to the right direction on how to install CWM and then install CM10 or 9 on my friends SGS 4G?
Thanks,
Tamrat

Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
For the SGS4G, the kernel, root file system, and recovery file system are all in "boot.img" -- flash one, you flash them all. They can be flashed through Odin (assuming you really like Windows), heimdall (multi-platform), through recovery, or from a root command line (for the adventurous only).
I would say the most robust way to get where you need to be would be to use Lumin's guide to make sure you've got a viable Gingerbread set-up going, then flash something reliable to get you to MTD, like TeamAcid's CM9.
From there, you should know that some of the KK ROMs use slightly different MTD partitioning and aren't a "just flash this ROM and keep your data" kind of thing.

jeffsf said:
Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
Click to expand...
Click to collapse
A long day Googling... and then a site turned up. One thing I forgot to mention was, before I installed this firmware, I had to use the "remove battery->plug usb->press the button combos->insert the battery" to enter download mode, but now I juts have to press vol down and power button.
Thanks for the reply,

Failure again
UPDATE:::
I tried to update to 2.3.6 as the guide suggests and I also wanted a clean stock OS in case the old one was not. But once again updating to 2.3.6 has been a pain. Kies Mini recognizes the phone but it doesn't recognize the firmware running on the phone. And also, firmware update is impossible since the button is greyed out.
I googled again and found the official 2.3.6 firmware for the phone (file name: T959VUVKJ6-REV00-home-low-CL694130.tar.md5) and tried flashing it using ODIN; absolutely no luck. It fails at the stage which says Slb.bin. Restarting the phone after that gives a "firmware upgrade failure" display. Only way to wake up the phone is to flash the previous OS back.
I am really confused here.
*********************EDIT***************
Some how, after like 10 retires and fiddling with ODIN, it finally flashed 2.3.6 to the SGS 4G. Still, fingers crossed.
*********************EDIT 2***************
Finally, its all working fine now. Thank you @jeffsf, thank you very much.

F*****************K
forgot an important step and now my IEMI number is gone........
do i throw the phone now, or is there any other way???

Don't throw your phone away! How do you know that you have "no IMEI" on your phone? We'll go from there.

Hopefully, you've backed up your data before starting to play around with ROMS. If so just load your backed up efs folder onto your storage & use Root Explorer to drop it over your existing one , it will overwrite your imei file & you will be good as new.
========================================================================================
I'm also in need of help, I have been running SlimSaber since last weekend, was wanting to try out Beanstalk. First full wipe, install & reboot wipe again, reinstall etc as per Dao's OP, but after the first install, it won't boot past the kernel splash. Tried again with same result. Decided to click it back to stock & start over, using Gremlin Remover (odin). Then saw that others were having similar issue so I tried to load in build from April1st.
But now it only boots back into recovery, won't boot to the OS ( everything indicated install was complete & no errors.)
1 clicked back again & just tried to put SlimSaber back on again, but have the same problem, will only boot into recovery.
I had to first load CM9 to get CWM 6.xx so I could install kk using TWRP
What am I not doing correctly? Thanks for any suggestions.

Flash kernel
Reboot recovery
Wipe all partitions
(Reboot recovery for good measure and wipe again if paranoid)
Install
Boot
If that doesn't do it, it is likely ROM or hardware.
---
Posted from whatever phone booted today

Since this is running GB VUVKG4, could you recommend a kernel that would work & get me to TWRP (or CWM 5.xx+)?

Either the Team Acid CM9 or Hefe Kernel should work.
---
Posted from whatever phone booted today