Database Info

[Q] Stuck in ROM limbo

First time poster: sorry if this is covered someplace, but the forum is quite extensive, and I couldn't find this particular issue anywhere.
I own a Rogers Captivate which I rooted, kept on stock rogers 2.2 firmware, but upgraded the kernel to Onix 2.0.5. I discovered the ROM kitchen today, and thought I'd try 2.3.3 (I got XWJVH v3). I turned off my lagfix, did a factory reset, cleaned my caches and attempted to flash within CWM. I think the flash was only partially successful: I am able to get the phone to boot into android about 40% of the time.
What concerns me is that even though I have installed ROM Manager, and a CWM app came pre-installed with this ROM, I do not appear to have any recovery loader. When I try with quickboot or from my PC the phone just sits at the "I896" splashscreen. It may be worth noting that I attemped this with whatever stock kernel the Kitchen gave me, as well as two versions of Talon. Heimdall has been successful in flashing these alternate kernels for me, Odin doesn't seem to see the phone at all. I have many NANDROID backups, but if I can't get into recovery, I seem to be stuck!
During normal boot (and some unsuccessful recovery attempts) the phone goes into a mode in which the graphics are not displayed properly - I cannot describe this any better than being reminiscent of when an NES catridge was dirty and needed cleaning.
If someone could provide me with some advice, or point me towards a 2.1, 2.2, 2.3 ROM that I can flash on a Canadian GS within Heimdall, I'd appreciate it.
-T.J.

Give Serendipity 7 a try and don't look back.
http://forum.xda-developers.com/showthread.php?t=1107894
http://serendipity7.weebly.com/
Very easy install and a custom kitchen for all your add on needs.

[OLD] Outdated MIUI Thread

UPDATE: This ROM is now outdated. Please use Dfgas's newer MIUI port, located here:
http://forum.xda-developers.com/showthread.php?t=1152518
Original Post:
You've watched. You've waited. You've sat impatiently looking for an update. I know I have. The wait is over.
Gingerbread AOSP MIUI 1.6.24 MTD Port
Ported to: Mesmerize (still having issues with Showcase port)
Please note: The 1.6.24 links currently posted are not my work! I just couldn't correct the eri.xml in framework-res.apk to remove "Verizon Wireless" from the top bar (cosmetic I know, but it bugged me--I'm picky like that), and... BDE sorta had his port done several hours before mine anyway. I can't take any credit whatsoever for these links, this is all his porting work.
WARNING: READ BEFORE FLASHING!!
This ROM was designed using the newer (for us) yaffs2/ext4 filesystem. Excepting CM7MTD, no other ROM uses this filesystem. As a result, this ROM uses CWM 4, and once you flash, you CANNOT flash any other ROM from Recovery. Should you have issues with the flash, or want to return to a different non-MTD ROM, you will need to Odin all the way back to stock. See post #2 for instructions.
SHOWCASE USERS: This is especially critical for Showcase users, as Cell South has prevented Odin flashing packages for the Showcase. IF YOU USE A CELLSOUTH SHOWCASE AND WANT TO FLASH BACK TO A DIFFERENT ROM, FIND A WORKING ODIN PACKAGE FIRST.
As always, the standard warning applies: I am not responsible for what may happen to your phone as a result of flashing this ROM, properly or improperly. No warranty whatsoever. You have been warned.
Credits
The biggest thanks go out to jt1134. NONE of this (including CM7MTD) would be possible if it weren't for the work he's done for the Fascinate, Mesmerize, and Showcase.
Andmer has also been critical to making this happen. He was the one to take JT's work, use his AOSP source, and build a working MIUI port for the Fascinate. Both he and JT continue to modify the ROMs and Kernels for MTD that we enjoy to work towards getting that hardware working.
Without these guys, there would be no port for us.
I'd like to thank lmartin92 for his tremendous help and knowledge. He worked tirelessly with me to get this working. Similarly, bdemartino has been a huge help in all around, as well specifically making sure we could get the "fascinatemtd" SMS padding code implemented into CM7MTD, and therefore MIUI MTD. Lastly, I'd like to thank Akellar for getting some Framework-res cosmetic edits working when I could not.
1.6.24 Note: Again, these are actually BDE's ports, not mine, I can't take any credit.
ROM Details
Update Schedule: MIUI receives weekly official updates, and Andmer has said he intends to port them to the Fascinate on that same schedule. I intend to port from his work on that same schedule, and once my overlay is fully worked out, it should take me only as long as it takes to apply it and upload. This thread will be updated every time a new ROM is released. I'll try to keep one or two previous week's ROM links just in case.
Radio: This ROM does not flash a radio, so it should use whatever radio you had before you flashed. This ROM is built for a Mesmerize/Showcase radio (making it an actual Mesmerize port), so if you're using the Fascinate EC01 radio, you'll want to either flash the EC10 or EE19 radios (typically by flashing the stock versions of those ROMs). Don't worry if you flash those ROMs; everything else (except the radio) will get overwritten.
Recovery: In order to support the yaffs2/ext4 filesystem, this ROM uses CWM 4. As a result, the normal "three finger Recovery" method does not work. Similarly, although the ROM includes a "Reboot into Recovery" menu option after holding power, that does not boot into recovery. The only method of getting into recovery at this point is to either use ADB or a Terminal Emulator app.
Within Terminal Emulator, type the bolded, underlined text:
su (enter; this grants SuperUser rights to Terminal Emulator)
reboot recovery (enter)
This should properly reboot the phone into Recovery mode.
Working:
Calls
Bluetooth!!
3G / Data
WiFi
SMS
Camera/Camcorder!!
USB mass storage / sdcard
GPS
ALL Sensors!!
Not Working/Known Issues:
MMS
Calls/SMS during deep sleep mode are not waking up the device to ring.
This app will prevent your device from deep sleep which is of course a battery drain, but you will receive calls. Whether its worth it or not is up to you.
https://market.android.com/details?id=otis8.softlocker
How to Flash
Copy the ROM to your SDcard.
Reboot phone into recovery, flash ROM as normal.
Make sure to wipe data, cache, and dalvik cache if you are coming from a non-MTD ROM, and possibly even CM7MTD.
Flash MIUI ROM from SD card.
The "MIUI" branded flash script will appear, and quickly disappear. THIS IS NORMAL. This verifies if CWM 4 is installed (on the first time through it will not be), and if not, installs it. The phone should reboot once again into recovery, but it will be standard CWM 4 Orange recovery.
Flash the ROM from your SD card once more. Note that the softkeys have changed; use the Search key as "Enter". The flash should proceed as normal.
1.6.24.1: Flash the 1.6.24.1 patch to correct all sensors.
Reboot phone when complete.
When your phone reboots, you should see the normal Samsung logo, and then a Galaxy S/CyanogenMod 7 logo. This will be followed by the MIUI.us boot screen, which is a moving starfield with a spinning globe.
Welcome to GB MIUI!
Mesmerize Download
http://olvisfoundation.com/xdadump/bdemartino/ROMS/MIUI/MIUI.us_mesmerize_1.6.24.1_Eng_Deo_ZipA_Signed_0627.zip
Showcase Download
((Still broken))
1.6.24.1 Patch Download - Fixes ALL sensors! (for both Mesmerize and Showcase, once later is released)
http://olvisfoundation.com/xdadump/bdemartino/ROMS/MIUI/MIUI.us_patch.zip

HOW TO GO BACK TO NON-MTD ROMS
Kanged from the Fascinate forums with immense thanks to kidserious, and referencing the "Files to get your Mesmerize back to stock 2.1 and 2.2.1" guide from Phidelt82
Things you'll need:
Odin
Working Odin package for your phone model
If you don't already have these, here are some links (sorry, Mesmerize stock ROM only):
Odin: http://download1422.mediafire.com/ii578172dylg/429fcpdtpckkcea/Odin3+v1.83.exe
EC10 Odin Package: http://www.megaupload.com/?d=N6JNT1ZE
Whatever Odin package you use must have a full bootloader included in the flash. EC10 should work, EE19 may not. I'm unable to advise which Showcase Odin package would work, I'm not familiar enough and they're not generally available.
STEP-BY-STEP
I'm writing these for the Odin newbie in mind. Experts, as long as you check "Repartition", you know the drill.
Open Odin. This does not need to be installed, simply run.
Pull off the back from your phone, remove the battery.
Connect the USB cable (best with the Samsung one that came with your phone), and hold Volume Down until you see the phone say "Download Mode". A little box should turn Yellow in Odin, signifying it detects the phone and is ready to flash it.
Click the PIT button. Locate the path to the PIT file extracted from the ZIP you downloaded above (or previously) to populate that field.
Click on the PDA button. Locate the path to the TAR.MD5 file extracted from the ZIP you downloaded above (of previously) to populate that field. Do NOT click on PHONE, Phone should be empty.
Make sure Re-Partition is checked. We want to overwrite the previous MIUI flash, and Re-Partition is what lets us do that fully.
Click the Start button. Let it proceed through the whole flashing process, which is approximately 10 minutes. You'll see "Complete!" in Odin and your phone's screen will go blank once it's finished.
For thoroughness' sake, I'm including the below steps. Again, experts could potentially circumvent, but below is the failsafe way.
Re-insert battery, boot phone. Allow it to boot into Blue (stock) recovery. it's okay if it says it can't mount "HIDDENSDCARD"; it's done the rest of the setup it needs to. If you're just staying with the stock ROM and recovery, you're done.
If you want a custom recovery:
Follow steps 1-7 above, skipping over step 4 (no PIT file needed), and flash your recovery of choice. You should now be able to flash whichever custom ROM you were on before, or restore from a Nandroid backup.
It is absolutely mandatory that you follow these steps exactly to properly get off of GB MIUI MTD (or CM7MTD for that matter) so that you can flash another ROM. Attempting another method or not following these steps implicitly will result in a bricked phone and you will have to follow this guide to fix it.

#3 reserved for me also.

Good for you man. Way to go!!!!!!
Tap-a-Talked from my Mesmerize

is there anyway u could port the cm7 releases to id really love to be running cm7 instead of having to flash fascinate radios and all tht crap..

Outstanding.

I'd love to test on my showcase. I have everything I need to go back via odin, and this is the rom I've been waiting for.

Congrats man, I know how much time/effort you put into this!
Sent from my SCH-I500 using XDA App

O and thx my pants are wet now good rom
Sent from my SCH-I500 using XDA App

hold of on tht keeps boot looping on the miui bootupscreen any thoughts?

I got the same thing, but I think it's because I forgot to wipe data/cache/whatever... So I'm trying again.
Edit:
Yeah, it's just looping the spash.

Im also getting boot loop. Im on the ee19 radio, should i do the 10 and retry it?

i tryed both and it bootlooped

godofwar762 said:
i tryed both and it bootlooped
Click to expand...
Click to collapse
That makes me very worried about flashing this.. I was just going to do it.

I wonder if flashing to the cm7 then trying to flash this would work better. Using the cm7 you can use rom manager to install the miui, so im gonna try that.
Edit: Unfortunately same thing that route also. Boot loop

That's what I came from, then the second time I went from the latest offical froyo.

seishuku said:
That's what I came from, then the second time I went from the latest offical froyo.
Click to expand...
Click to collapse
With no issues?

It did the same thing.

Well imma go try it ill report back when I'm done.

Are you guys flashing the Rom twice like the op says to?
Sent from my SCH-I500 using XDA App

[Q] NexusS (i9020T) hard bricked, at which step did I go wrong?

Hi everyone, I had a problem with my previous nexus s (I have since gotten a working replacement) and I was wondering where exactly I messed up so in the future I can avoid this
Here is what I did on my previous phone:
1. I flashed ics onto my device from the ota update package from androidcentral, it was 4.0.3. (This worked great and I had it on my phone for 2-3 months before I tried the next steps.)
2. I rooted my device successfully using the guide at nexusshacks.
3. I also flashed TWRP recovery (fastboot) and superuser using the above guide/links
4. When I would turn off my phone it would boot to a screen with a red triangle and an opened android bot. So what I would have to do is flash twrp recovery everytime I turned the phone on just to get it to work.
5. What I wanted to do was keep the stock rom but still have twrp recovery without it making me reflash it on every boot. So I clicked install and tried to flash the stock rom (update package from the link in step 1) with twrp recovery. It then turned off my phone and hard bricked it. I couldn't turn it on anymore and a new battery didn't fix it.
I was able to get a replacement now and I was just wondering at which step did I go wrong? I THINK that I should have wiped my cache before I tried to reflash the stock rom but maybe I'm way off base here. This is why I posted a question here so hopefully some of you guys can help.
I did think about posting in another thread, but I didn't wanna threadjack or anything... and his problem also seemed a bit different then mine. Also, sorry about not being able to provide the specific links it won't let me post them until I've posted 8 times.

I don't know for sure but team win recovery has been reported to corrupt the device's efs directory. I've even had problems myself using clockwork recovery. I've moved on to razor recovery and haven't looked back.
This is the most flash-friendly phone I've ever owned, and razor recovery rivals amon ra (which was awesome on my g1 and evo). I really think it may have just been the recovery you were using... Somebody correct me if i'm wrong.
Sent from my Nexus S 4G using Tapatalk

I had once corrupted one of the partition. I fixed to by flashing stock recovery and stock rom.
Use adam outler's unbrickable mod tool. It can be found in android development section.
Sent from my Nexus S using XDA

Thanks for the replies.
That's interesting about twrp... I didn't know that. Truth be told, the only reason I went for it over other ones like clockwork mod was because the UI looked pretty nice and easy to use. Also the guide I followed at nexusshacks used that, so I wanted to stay consistent with it.
jishnu7, it's a little late for that now however as I actually have already received a working replacement from my carrier, but in the future if something ever does go wrong (hopefully not) I will definitely check that out.
The main thing I'm wondering is if it messed up because I tried to reflash the stock rom essentially over top itself (was hoping that by doing that, it would stop making me reflash twrp on every reboot) or if it was because I didn't wipe the cache before the flash.
Also, what I really wanted to do with my phone was to keep the stock rom but be able to overclock my cpu/gpu. I was hoping I could set different overclocks for different things (I've heard of kernels where you can downclock your phone when the screens off and have it overclocked slightly while you're using it, that would be something I'd like to have). I figured to install those kernels I would have to root my phone, replace stock recovery and install superuser so that's why I tried to do that. Once again, I'm pretty new to all this stuff for my phone.

Sorry to bump this thread again, but I would really like to know how I could avoid what happened to me for the future. I think it's because I flashed the stock 4.0.3 rom over itself (was hoping that by doing that twrp recovery would stay on the phone after reboot).
What I would like to do is install something like CM9 or AOKP and use the Matr1x kernel so I could undervolt or overclock my phone.

I seriously dont get how u hard bricked your phone...
the reason you are thinking is you reflashed stock rom without wiping cache, as per my experiece its not at all the reason
now, whats my experience??
...I have some fault with my nexus device and I'm working on it,,and I did everything I could do...one of the thing out of those things was reflashing stock rom without wiping,and i did it quite a several times...my device never hard bricked,,however it was soft bricked for many times,,and i recovered from it
so reflasing a stock rom over stock rom, over ICS, over some themed custom rom,will not hard brick your device, you must be missing something none of your steps sounds suspecious
P.S:- pulling out battey while flashing something like this sounds suspecious, never tried though

I'm not sure what happened either to be quite honest with you. Since giving it another shot now with my new fresh phone I have had great success!
I did everything I wanted to do all in one go. Rooted it, install CWM touch, install AOKP (went with milestone 4 cuz I heard newest build 29 has some bugs) + gapps and installed matr1x kernel 18.5 bfs.
The only thing I did different from last time was installing CWM touch (instead of twrp) and flashed aokp this time (instead of reflashing 4.0.3 over itself).

I would just avoid step 2 at all cost.
The nexus s hacks dude is a tool.

[Q] I can't load CWM on my SGS 4G (T-Mobile)

Hello all,
Okay, I admit that I am gonna get a lot of "use the search tool first" replies, but please hear me out. I have done my fair share of searching. Its not that I haven't found anything, its just the things I found are useless for this SGS 4G. I really wanted to install Cyanogen Mo on the SGS (its not actually mine, a friend asked me to do it since he saw my old SGS GT-I9000 running CM).
I am gonna try and give a detailed report . The phone was originally from T-Mobile and now unlocked permanently. Its running firmware version 2.3.3 that I installed just recently. I found out that I can't install CWM on the stock kernel or bootloader or whatever and I needed a new of the thing. So I went on searching and searching....found a handful of help but none work. Every method breaks at some point and I go to the "firmware update failed" thing on the phone, which I then install 2.3.3 again using ODIN and try another method. I have tried a lot of things. Hemidall, ODIN, SuperOneClick, and a lot of gibbrish-sounding methods. None work. I am now running 2.3.3. Here are some infos:
ABOUT PHONE:
Model Number: SGH-T959V
Firmware Version: 2.3.3
Baseband Version: T959VUVKF1
Kernel Version: 2.6.35.7-T959VUVKF1-CL270364
Build Number: GINGERBREAD.VUVKF1
The files I used to flash to 2.3.3 using ODIN v1.85:
PIT: Hawk_Sidekick_VibrantPlus_831.pit
PDA: CODE_T959VUVKF1_CL270364_REV00_user_low_noship.tar.md5
PHONE: T959VUVKF1-Phone-CL1020302.tar.md5
CSC: SGH-T959V-CSC-TMB-VIBRANTP.tar.md5
I hope the above infos are enough. So, can anyone help me and point me to the right direction on how to install CWM and then install CM10 or 9 on my friends SGS 4G?
Thanks,
Tamrat

Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
For the SGS4G, the kernel, root file system, and recovery file system are all in "boot.img" -- flash one, you flash them all. They can be flashed through Odin (assuming you really like Windows), heimdall (multi-platform), through recovery, or from a root command line (for the adventurous only).
I would say the most robust way to get where you need to be would be to use Lumin's guide to make sure you've got a viable Gingerbread set-up going, then flash something reliable to get you to MTD, like TeamAcid's CM9.
From there, you should know that some of the KK ROMs use slightly different MTD partitioning and aren't a "just flash this ROM and keep your data" kind of thing.

jeffsf said:
Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
Click to expand...
Click to collapse
A long day Googling... and then a site turned up. One thing I forgot to mention was, before I installed this firmware, I had to use the "remove battery->plug usb->press the button combos->insert the battery" to enter download mode, but now I juts have to press vol down and power button.
Thanks for the reply,

Failure again
UPDATE:::
I tried to update to 2.3.6 as the guide suggests and I also wanted a clean stock OS in case the old one was not. But once again updating to 2.3.6 has been a pain. Kies Mini recognizes the phone but it doesn't recognize the firmware running on the phone. And also, firmware update is impossible since the button is greyed out.
I googled again and found the official 2.3.6 firmware for the phone (file name: T959VUVKJ6-REV00-home-low-CL694130.tar.md5) and tried flashing it using ODIN; absolutely no luck. It fails at the stage which says Slb.bin. Restarting the phone after that gives a "firmware upgrade failure" display. Only way to wake up the phone is to flash the previous OS back.
I am really confused here.
*********************EDIT***************
Some how, after like 10 retires and fiddling with ODIN, it finally flashed 2.3.6 to the SGS 4G. Still, fingers crossed.
*********************EDIT 2***************
Finally, its all working fine now. Thank you @jeffsf, thank you very much.

F*****************K
forgot an important step and now my IEMI number is gone........
do i throw the phone now, or is there any other way???

Don't throw your phone away! How do you know that you have "no IMEI" on your phone? We'll go from there.

Hopefully, you've backed up your data before starting to play around with ROMS. If so just load your backed up efs folder onto your storage & use Root Explorer to drop it over your existing one , it will overwrite your imei file & you will be good as new.
========================================================================================
I'm also in need of help, I have been running SlimSaber since last weekend, was wanting to try out Beanstalk. First full wipe, install & reboot wipe again, reinstall etc as per Dao's OP, but after the first install, it won't boot past the kernel splash. Tried again with same result. Decided to click it back to stock & start over, using Gremlin Remover (odin). Then saw that others were having similar issue so I tried to load in build from April1st.
But now it only boots back into recovery, won't boot to the OS ( everything indicated install was complete & no errors.)
1 clicked back again & just tried to put SlimSaber back on again, but have the same problem, will only boot into recovery.
I had to first load CM9 to get CWM 6.xx so I could install kk using TWRP
What am I not doing correctly? Thanks for any suggestions.

Flash kernel
Reboot recovery
Wipe all partitions
(Reboot recovery for good measure and wipe again if paranoid)
Install
Boot
If that doesn't do it, it is likely ROM or hardware.
---
Posted from whatever phone booted today

Since this is running GB VUVKG4, could you recommend a kernel that would work & get me to TWRP (or CWM 5.xx+)?

Either the Team Acid CM9 or Hefe Kernel should work.
---
Posted from whatever phone booted today

Touch dead on S6 edge. Software or Hardware?

Hi experts
I tried to help someone out with his Galaxy S6 925i, today. He told me the following:
-The phone at been modified (don't know what) by his cousin
-After "a while" the TOUCHscreen stopped working
-Don't know based on what, but he suspected the problem to be in the kernel
-Factory reset no effect
So I said I tried my best and downloaded the appropriate 6.0.1 stock ROM from Sammobile and flashed it via Odin. No effect. Question here: These ROMs do come with a kernel, do they? So that should have fixed any kernel issue??
So because that didn't work and as you can see I'm not 100% sure about the kernel issue, I tried to follow this procedure to get a new kernel installed:
http://forum.xda-developers.com/gal...g920i-marshmallow-6-0-1-t3339394/post65906864
So I flashed the recovery and started it. No TOUCHscreen functionality.
Am I right to assume that I have proven that the touch (un)functionality is NOT a software but a hardware issue? Because the recovery should work no matter how screwed the ROM is?! Cause that person is going to get a screen replacement tomorrow, and if that new screen then doesn't work I'm kinda like screwed...
Another question: Is flashing with 'AP' via Odin the same as flashing via recovery? So could I flash any file that I usually would use the recovery for also flash via Odin? Because if I wanted to flash a new kernel without a working recovery, I would have to use adb (right?). But I can't use adb, because I can't enable USB-debugging, cause the screen's not working...
Thanks heaps for helping out!