[FIX] 3G Upload & Download Speeds - EVO Shift 4G Android Development

Don't forget to change your proxy!
I've recently learned that sprint phones route data through a proxy by default to throttle download speeds. You can easily change that www.forum.xda-developers.com/showthread.php?t=922978
I am wondering if I flash a new Rom that doesn't have epst, will I be SOL? I believe that the Rom must be sense for this to work...
Sent from my PG06100 using Tapatalk

Link is borked

link dont work?

Step 1. Install MSL Reader from the market, use this to obtain your MSL.
Step 2. In your dialer, enter ##3282#
Step 3. Choose Edit Mode and enter your MSL as the requested password.
Step 4. Choose Advanced
Step 5. Change HTTP PD Proxy Porter to 0
Step 6. Change HTTP PD PD Proxy Address to 0.0.0.0
Step 7. Back out of here, and reboot.

I should add that I am noticing a real difference (but cannot confirm it is not placebo).

interesting, ill keep my eye on this.

As we all know, HTC and Sprint borked downloads for apps like Rhapsody, Mog, Thumbplay.
I recently ran across the subject and i found a fix. It is very simple.
1. Get your MSL, There are many ways, call Sprint, Download the app MSL Reader from the market, CDMA workshop
2. After you have your MSL go to your phone and type ##3282#
3. Click Edit Mode
4. Click Advanced
5. Scroll down to HTTP PD Proxy Port & HTTP PD Proxy Address
6. Change HTTP PD Proxy Port to 0 (zero)
7. Change HTTP PD Proxy Address to 0.0.0.0
8. Go enjoy Downloads and a .20-.60 mbps increase in 3G speeds!
-All credit to original finder of this fix, i am just passing it along and found the speed increase. Also when you flash a new rom it will back to old settings so remember to re-apply and it wont make you more vulnerable to anything.
Click to expand...
Click to collapse
Pulled this from the EVO forums, not sure how to properly give credit, but the original thread I got this from is over here. This worked for me, if this is indeed a double post sorry for that, just spreading the word.
If you wish to return to the original port values just like before for any reason.
sarspants said:
Proxy Port: 8085
Proxy Address: pd.vog.sprintpcs.com
Click to expand...
Click to collapse

bubby323 said:
-All credit to original finder of this fix, i am just passing it along and found the speed increase. Also when you flash a new rom it will back to old settings so remember to re-apply and it wont make you more vulnerable to anything.
Click to expand...
Click to collapse
This is a duplicate thread and should probably be merged.

you could always link your credit to the original poster. lol @ the copy paste

Sorry I wasn't aware of the double post. Mods can remove or merge this as needed.

For reference, the original values were:
Proxy Port: 8085
Proxy Address: pd.vog.sprintpcs.com

sarspants said:
For reference, the original values were:
Proxy Port: 8085
Proxy Address: pd.vog.sprintpcs.com
Click to expand...
Click to collapse
Thanks I'll include that in the OP.

bubby323 said:
Sorry I wasn't aware of the double post. Mods can remove or merge this as needed.
Click to expand...
Click to collapse
No worries, the other post has a bad title, so it should probably be merged into this one.

cloverdale said:
No worries, the other post has a bad title, so it should probably be merged into this one.
Click to expand...
Click to collapse
Can you please link me to that post so that I can merge it? Thanks

i did this, didn't observe any increase in speeds.

theimpaler747 said:
Can you please link me to that post so that I can merge it? Thanks
Click to expand...
Click to collapse
Here you are http://forum.xda-developers.com/showthread.php?t=935061

Threads merged

humm can't or don't see any difference...

I don't particularly notice a difference yet. However, the market has been running slower or timing out completely on me since I tried this. Not sure if it's related.

Noticing about 15% slower with the "fix" after switching back and forth many times.

Related

HELP! Problems about Downloading Stuff.

Hi people, many of the forum users here uses rapidshare links for their downloads. I would really like to download the themes from this thread but I'm unable to do so because of the rapidshare links. When i press free user it always say I'm already downloading stuff and all! Please, someone teach em how to download? thanks!
Can anyone please help me? Thanks.
Are you behind a network with many users? If yes, then someone is downloading stuff already with the same external IP address. If no, then it's your ISP that's sharing the same external IP with many users. Which file are you trying to download? Maybe I can upload it to somewhere else for you.
vale|46 said:
Are you behind a network with many users? If yes, then someone is downloading stuff already with the same external IP address. If no, then it's your ISP that's sharing the same external IP with many users. Which file are you trying to download? Maybe I can upload it to somewhere else for you.
Click to expand...
Click to collapse
do you have a static ip?
vale|46 said:
Are you behind a network with many users? If yes, then someone is downloading stuff already with the same external IP address. If no, then it's your ISP that's sharing the same external IP with many users. Which file are you trying to download? Maybe I can upload it to somewhere else for you.
Click to expand...
Click to collapse
I'm not too sure as well, I'm quite a noob ): anyway I wanted to download the theme here: http://rapidshare.com/files/201038990/Neon_Naranja.rar
but I cant seem to do so everytime! There's always this message:
You want to download the following file:
http://rapidshare.com/files/201038990/Neon_Naranja.rar | 2599 KB
The download session has expired. Please click here to start the download again.
But, I always click right away after the seconds of waiting time has ended!
What is a static ip? It seems that the problem lies with IP addresses?
OMG, help! ):
Anyone can help please?
^ It happens. That's why RS is often dubbed Rapids*cks..
Anyways, I'm one of the lucky guys having a dynamic IP so...
http://www.uploadjockey.com/download/7370480/Neon_Naranja.rar
Now you can download the file from a dozen mirrors!
OMG, thank you so much [deXter]!!! anyway I think zshare is one of the best cos I never encounter problems downloading from it at all!
Well, anyway, do you have any idea how to solve such problems on RapidShare if it keeps on happening?
Can't do much about it mate.. there are ways to change your IP address, like switching your modem/router on and off.. but that doesn't always work. You could talk to your ISP about changing your IP. The surefire way would be to look for public proxy servers and use them. but proxies are a messy affair, they're not reliable and might be slow.. well if you really need a file and no one's around, proxies are your only way. But hey, once you get into it, finding a working proxy is a cinch. Then there's also Tor, which is an anonymous network, but it's considerably slow so forget downloading large files with it. It's not meant for filesharing anyways..
Or you could get yourself a free premium account.. there are forums and communities which reward users with a free account on completion of certain posts or ad-surveys..
Don't ask me any further details though
Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day. To get around this, you need to show the rapidshare server a different IP address.
Here are some methods for doing this:
1. Short-Out the JavaScript:
1. Goto the page you want to download
2. Select FREE button
3. In the address bar put the following: javascript:alert(c=0)
4. Click OK
5. Click OK to the pop-up box
6. Enter the captcha
7. Download Your File
2. Request a new IP address from your ISP server.
Here’s how to do it in windows:
1. Click Start
2. Click run
3. In the run box type cmd.exe and click OK
4. When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit
5. Erase your cookies in whatever browser you are using.
6. Try the rapidshare download again.
Frequently you will be assigned a new IP address when this happens. Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work. To be honest, I do not know how to do this in linux/unix/etc. If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.

Modified Mms.apk - Change MMS User Agent [UPDATED 28th Feb][Eclair Included]

Hi everyone,
Eclair update, see changelog
I've just wrote a patch that allows you to change the MMS User-Agent within the messaging application. It's handy to for the follow reason:
If your carrier does not recognise the User-Agent as one it has seen before, and they are not using a well behaved MMSC, the MMSC will simply degrade the message to the lowest quality. The fix is to "spoof" the User-Agent from a phone that your carrier does recognise.
Click to expand...
Click to collapse
I'm on O2 in the UK and at present, all my picture messages would previously come through as 160x120px. I have successfully tested this with a Nokia N95 User-Agent string (examples below) and my MMS's now come through perfectly.
The APK below is built against cyanogen's CyanogenMod 3.9.7 (which also means you get rgv151's Send On Enter patch and other goodies aswell). The patch is also in the ZIP. Once installed, the setting is found under Messaging -> Settings -> MMS User-Agent.
To install, download the zip below, extract the APK and:
adb remount
adb push Mms.apk /system/app
Click to expand...
Click to collapse
List of User Agent strings
SonyEricssonW800i/R1L
iPhoneOS/3.0 (7A341)
BlackBerry8800/4.2.1 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/100
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
Changelog
v1
Initial release
v2
Cosmetic Changes - Now has a new "Advanced Settings for MMS" screen in the settings. You can also now choose from a predefined list of User Agents, or enter your own by selecting 'Custom' and then entering your user agent in the option below.
Rebuilt against CM3.9.7
Hero
For the Hero Mms.apk, I've had to do it a bit different. There's no menu's, I've just decompiled the classes.dex (using JF's superb smali) from the Mms.apk in JACHeroski's 2.7.4 and changed the hardcoded values for the User Agent. I've recompiled three versions, one using the N95 string, another using the BlackBerry 8800 (both in hero_mms.zip) and the final one using a Softbank UA (in Mms_softbank.zip). I'm not running a Hero rom so can't test these, let me know if you try them. You only need one of the APKs from the ZIP! Rename the one you want to Mms.apk, then push it where you need to on your ROM.
Eclair
After quite a few people PM'ing me, I've updated the original patch for Eclair. I'm still on Donut which is why I haven't updated it before. Anyway it's been commited to OpenEclair and should be in the next release: http://github.com/openeclair/androi...mmit/3e82f91112764a998944415b031582b9caaf1217
I haven't compiled it myself therefore I can't produce an APK for download as yet. If you fancy doing it yourself, here's the patch: http://paste2.org/p/692468.
---
If you don't know, this command will tell you where:
adb shell find /system -name Mms.apk
Click to expand...
Click to collapse
so you're saying that we could push this patch onto a hero build, and then we would get our MMS at the quality we should, instead of it being compressed and looking horrible?
is this the Mms.apk from the Hero ROM or just the regular cupcake messaging app?
thanks! hope this works!
Tested and working!
senab said:
Tested and working!
Click to expand...
Click to collapse
Great job on this!
do you think if you had time you coudl crack open the mms.apk for the Hero ROM?
i can send you the correct Mms.apk to see if you can edit the user agent on it also!!
thanks just PM me.
I am assuming that the User Agent is listed (by default) as the phone itself, and generally performs the same regardless of the installed ROM. Is that correct?
johnnylicious said:
Great job on this!
do you think if you had time you coudl crack open the mms.apk for the Hero ROM?
i can send you the correct Mms.apk to see if you can edit the user agent on it also!!
thanks just PM me.
Click to expand...
Click to collapse
this would be so awesome considering it's the only thing at this point keeping me from switching to hero builds exclusively.
Zane McFate said:
I am assuming that the User Agent is listed (by default) as the phone itself, and generally performs the same regardless of the installed ROM. Is that correct?
Click to expand...
Click to collapse
The default is "Android-Mms/0.1" and I haven't changed that. I'm currently working on a new version that will let you select from some predefined choices (as well as being able to input a custom one). Not sure on whether it will work for other ROMs but I can't see why not.
johnnylicious said:
Great job on this! do you think if you had time you coudl crack open the mms.apk for the Hero ROM? i can send you the correct Mms.apk to see if you can edit the user agent on it also!!
Click to expand...
Click to collapse
This totally depends on whether the source is available for the APK. I don't particularly fancy decompiling the dex files but I may have a look soon.
senab said:
This totally depends on whether the source is available for the APK. I don't particularly fancy decompiling the dex files but I may have a look soon.
Click to expand...
Click to collapse
hmm im not sure if that available but you can try and take a look at it
http://www.mediafire.com/download.php?1j2myyjmion
hmmm
will this spoofing of the user agent allow people that do not have the data plan to trick tmobile into saying hey this person doesnt have a g1 so lets go ahead and send? since most phones do not require data plan to send/receive a mms
AF9210 said:
will this spoofing of the user agent allow people that do not have the data plan to trick tmobile into saying hey this person doesnt have a g1 so lets go ahead and send? since most phones do not require data plan to send/receive a mms
Click to expand...
Click to collapse
I'm not sure about this data plan, but yes T-Mobile will not be able to tell you have a G1 (or Android phone).
V2 out!
Cosmetic Changes - Now has a new "Advanced Settings for MMS" screen in the settings. You can also now choose from a predefined list of User Agents, or enter your own by selecting 'Custom' and then entering your user agent in the option below.
If anyone has any other User Agents to add, let me know.
Hey I'm using the cyan 3.9.2 for sum reason I always loose the ability to rm -r and I always get read only file. I'm used to jac roms n never had this problem with deleting apk's is there an alternative to using adb..??? Thanks n sorry for asking
hope someone can make a fix for the hero mms.apk
bigslanki said:
Hey I'm using the cyan 3.9.2 for sum reason I always loose the ability to rm -r and I always get read only file. I'm used to jac roms n never had this problem with deleting apk's is there an alternative to using adb..??? Thanks n sorry for asking
Click to expand...
Click to collapse
I'm going to guess it's an issue with the drive not being set to read/write. Perhaps your other rom set that automatically.
mms
Feature request
Am mms.apk with a homescreen icon that tells you number of unread messages, just like the mail app from Hero does. I know ,wishful thinking...
johnnylicious said:
hope someone can make a fix for the hero mms.apk
Click to expand...
Click to collapse
I'm looking into this, but no promises....
monotremata said:
Feature request
Am mms.apk with a homescreen icon that tells you number of unread messages, just like the mail app from Hero does. I know ,wishful thinking...
Click to expand...
Click to collapse
http://www.cyrket.com/package/com.kanokgems.smswidget
senab said:
I'm looking into this, but no promises....
Click to expand...
Click to collapse
thanks again!

[GUIDE] EVO on MetroPCS Web,MMS,G Apps WORKING!

UPDATE 10-10-10:
This guide is no longer needed, as full ROMs are now available for the EVO on MetroPCS.
-MetroDroid v1.0 By Bloodykiller86 (Ready to run)
-Jiminy v2 By deathsled(Needs Token's Metro flash V3)
I wanted to post a full working solution for MMS for the HTC EVO on MetroPCS. This is a mix of excerpts from other guides and ideas all in one place.
UPDATE 09-07-10:
This method is no longer ROM specific, you can use almost any ROM!!
Credits:
token419
killac93
Avalaunchmods
Others, that i missed or don't know...sorry
What this can do:
-SMS
-MMS
-Web
-Voice search (with v2.0.1 and up ONLY)
-Voice mail notifications
-Google apps that sync (news, weather)
-Browse the market (DL is still WiFi only)
-Working Froyo ROM
What this can't do:
-Visual Voice Mail (i think you need to sign up for it from metro, @ $3 mo)
-DL from market with 1X Metro service
-4G
-Print money
-Grant wishes, even if one wish is for a iPhone4
Software needed:
-Rooted EVO
-Working EVO ROM
-Ava-FroyoV2RC3 ROM (thread link below)LINK with wifi fix(still fastest way to get it working)
-metropcs_eris_web_mms_v3.zip (thread link below)
-Cdma-Workshop (Any Build...google it )
-Qpst v2.7 build 323 LINK PASS=cdma-king.com
-Htc Hero DIAG Drivers LINK
-Htc Sync LINK
-ClockWorkMod/Rom Manager (Free Market DL)
-Autostart (Free market DL)
-Titanium Backup (Free market DL) Optional!
You will need someone to add your ESN to Metros inventory... search Ebay, craigslist, or local stores...NOT corporate stores!
Android market ONLY works on wifi with this setup on a 1X metroPCS network. BUT, you can download apps from SlideME.org WITHOUT wifi... they have a market type app you can download on their website.
BACK UP ALL YOUR DATA FIRST!!!!!!
PART 1:
1. Press ##DIAG# (##3424#) on your phone You will see a screen Pop Up Thats Normal
2. Now plug The phone up to the computer and it will try and find the drivers but it will fail or ask you to locate the drivers manually so make sure you remember where you unzipped the files
3. Once you have that setup Go to Cdma-Workshop Go To the port the phone is on and Read From the Phone and go to the Security Tab.....and On the Spc Section Read The lock Code and write it to back to the phone so it says unlocked Then make the code 000000 and rewrite the code so it says sucess.
4. Now Close Cdma-Workshop and Open QPST Configuration Click On The Ports Tab and Add New Port ( Make Sure Show Serial and Usb/QC Diag Ports Only is Unchecked) and Add The Port Of Your Hero.
5.Highlight Your Port and Click Start Client and Start Service programming and Press Read From Phone The SPC should be all 0's so click on the M.I.P. Tab and Change The Mobile IP Behavior To Simple Ip. Edit The M.I.P. Profiles at the Top. Your NAI and Tethered NAI should be ([email protected])
6. Next Click On The PPP Config Tab and Click the UM Button your user id should be ([email protected]) and the password and tethered NAI should be metropcs. Do the Same For the AN Button and press Write to Phone It should Give You a Error But Dont Worry About It
7. Press ##DATA# (##3282#) And Setup your Data for your phone and press menu and Commit So your phone Will Reboot
ORIGINAL THREAD:
http://forum.xda-developers.com/showthread.php?t=704161
PART 2:
Download Rom Manager from the Market.
Download Autostart Root from the market
Put the "metropcs_eris_web_mms_v3.zip" on the root of your sdcard.
Open Rom Manager and select "Install ROM from sdcard".
It will give you a list of items on your sdcard.. select "metropcs_eris_web_mms_v3.zip"
DO NOT SELECT WIPE DATA, but you may select backup ROM if you want. You are not installing a ROM, just some patch files.
MertoPCSv3 THREAD:
http://forum.xda-developers.com/showthread.php?t=730289
No need for anycut proxy setup with token419's flash install....
Quote form Token419's thread on what his flash does:
Requirements:
1. Rooted Rom that supports IPTABLES and has been flashed and booted once
2. Download the file for your carrier from below
3. Flash the file you dowloaded for your carrier from your recovery console (i.e. Amon Ra, Clockwork etc.)
4. Download and install "Autostart (root)" from blank-online.eu in the Marketplace
5. After the phone reboots choose "Always Allow" to the SU prompt
6. Reboot (some froyo roms take 2 reboots)
7. Done
What this flash doesYou don't need to do any of this, it is just outlining what the flash file does)
1. Remove any instances of:
/system/bin/u2nl
/system/xbin/sqlite3
/data/opt/autostart.sh
/data/eri.xml
2. Push and set appropriate Permissions on:
/system/bin/u2nl (the program that makes routing traffic through the proxy possible)
/system/xbin/sqlite3 (some roms include this, but the permissions may not be set correctly)
/data/eri.xml (used to change the Carrier Display name on the lock screen and notification bar)
/data/opt/autostart.sh (used set the iptables and u2nl settings at boot)
3. Drop database tables and replace them with appropriate Carrier Settings in:
/data/data/com.android.providers.telephony/databases/telephony.db (the database that the MMS program looks at for carrier settings)
4. Updates to proper MNC and Carrier name in build.prop
Click to expand...
Click to collapse
PART 3:
Using the Mms.apk from the incredible, you will be able to send MMS.
Download the Mms.apk from below.
Using adb push you will need to replace the Mms.apk that on the phone with this one.
Start a command prompt:
Code:
>adb remount
>adb push c:\Mms.apk /system/app/Mms.apk
>adb reboot
I am not a ADB master, but this worked for me, if someone wants to suggest a better/cleaner solution. Feel free
Once the phone has restarted, open the messaging app. Try to send a MMS (use a buddy or your email). It should send.
Now for the bugs:
-Once a SMS/MMS has sent, you cant view the conversation threads or read new SMS or MMS.... just says loading forever.
-You cant send MMS with wifi on, just turn it off to send. (looking into fixing that)
Workaround:
Once you have sent a MMS and you can confirm it working. Download Handcent from the market. You will be able to view SMS and MMS threads with handcent. But you can ONLY send MMS with the OEM messaing app. If you send with the handcent, it will send a SMIL.XML file with the image, and the person getting it will most likely not be able to view it.
RECAP:
-Send MMS with messaging app
-View SMS/MMS with handcent
-Send SMS with handcent
I know this sux, but it does work!! Hopfully after MetroPCS starts the android plan, we wont have any problems.
EDIT:
Anyone having problems with voice mail notifications, here is the fix.
Using adb push you need to push the VVM.apk from below to the system/app folder on the phone. And remove the Sprint_VVM.apk app.
Start a command prompt:
Code:
>adb remount
>adb push c:\VVM.apk /system/app/VVM.apk
>adb shell rm /system/app/Sprint_VVM.apk
>adb reboot
Now you will need Voicemail notification app from the market, it free...
http://www.androlib.com/android.application.uk-co-extorian-voicemailnotifier-jAjiz.aspx
I have confirmed this method working with these ROMs:
-Fresh EVO (all)
-OMJ (all)
Now you should have working MMS, WEB and google apps (market still WiFi DL only)
This guide is what i used to get mine working....mileage may vary....
Click to expand...
Click to collapse
How about voicemail notifications? and what about voice search (not voice dial), does that work w/o wifi?
ps: Nice tutorial !!!, haven't tried yet probably wait for official update for 2.2
no web yet
i did everyting had the 3g icon but no web, i kept messing with it now nothing, and on the data profile (##3283) i lost the user name
louforgiveno said:
How about voicemail notifications? and what about voice search (not voice dial), does that work w/o wifi?
ps: Nice tutorial !!!, haven't tried yet probably wait for official update for 2.2
Click to expand...
Click to collapse
Voice search does not work... "connection problem"
Voice mail, you DO get notification, voice mail needs to be set up... i will add it to the guide. But Visual Voice Mail does not work. MetroPCS does offer a visual voice mail for $3 a month....i see settings that would indicate that it "SHOULD" work with the metro system
no web yet
i did everyting had the 3g icon but no web, i kept messing with it now nothing, and on the data profile (##3283) i lost the user name
Click to expand...
Click to collapse
The use name is set in QPST, try that again. Are you in a 1X or EVDO network area? Did you make the Anycut > Proxy short cut, and enter in the right values?
xboxhacker said:
The use name is set in QPST, try that again. Are you in a 1X or EVDO network area? Did you make the Anycut > Proxy short cut, and enter in the right values?
Click to expand...
Click to collapse
Well got it working, sadly I can't get the metro Rom I can't get because my evo doesn't wants to be rooted, tried simple root but nothing o well
great!!! guide, works on my EVO, the only thing is my push email does not work "network error"
thanks!!!!!!
jogitoxxx said:
great!!! guide, works on my EVO, the only thing is my push email does not work "network error"
thanks!!!!!!
Click to expand...
Click to collapse
Yeah...i get a network error trying to get my AOL.... but i just goto web mail and check it.
Looks cool but I'll wait until it can print money and transform into a jet and fly to the private island it built for me, otherwise I don't care
katiedonut said:
Looks cool but I'll wait until it can print money and transform into a jet and fly to the private island it built for me, otherwise I don't care
Click to expand...
Click to collapse
I am glad someone got that reference...LOL
xboxhacker said:
Yeah...i get a network error trying to get my AOL.... but i just goto web mail and check it.
Click to expand...
Click to collapse
try setting up aol to push to gmail and gmail to the phone, exchange activesync schedule, as items arrive, i set mine to every hour for batt life.
If you have a yahoo account, change settings to yahoo asia and you can get the free option to push mail.
Hope this helps
for those having trouble rooting the evo this migh help
http://forum.xda-developers.com/showpost.php?p=7422612&postcount=1251
Got mine root and downgrade
just installed "(Rom)Ava-FroyoV3 4G+Cams+LEDS+tether+2.2Sense+newradio!" mms does not work, i'm getting "sending address unresolved"
any ideas or do I have to get back to ava-froyov2rc3 ???
jogitoxxx said:
just installed "(Rom)Ava-FroyoV3 4G+Cams+LEDS+tether+2.2Sense+newradio!" mms does not work, i'm getting "sending address unresolved"
any ideas or do I have to get back to ava-froyov2rc3 ???
Click to expand...
Click to collapse
I am working on it now... the AvaV3 wont work with MMS. Go back to V2RC3
xboxhacker said:
I am working on it now... the AvaV3 wont work with MMS. Go back to V2RC3
Click to expand...
Click to collapse
Ok, I will wait
thanks
UPDATE 8/1/10
Using the Ava FroyoV2RC3: as of today, i am getting "service denied" message when sending a MMS..... web and sync apps work just fine.
In other words, this solution does not get MMS working. In addition, the use of Anycut isn't really required if the autostart and u2nl solution is correctly implemented.
We really need to consolidate these procedures and improve existing solutions as opposed to coming up with additional partial solution threads. As I mentioned in another thread, everything but MMS has been working for the EVO on Cricket and Metro for some time now. The only real challenge at this point is MMS.
fritzel67 said:
In other words, this solution does not get MMS working. In addition, the use of Anycut isn't really required if the autostart and u2nl solution is correctly implemented.
We really need to consolidate these procedures and improve existing solutions as opposed to coming up with additional partial solution threads. As I mentioned in another thread, everything but MMS has been working for the EVO on Cricket and Metro for some time now. The only real challenge at this point is MMS.
Click to expand...
Click to collapse
this solution does not get MMS workin
Click to expand...
Click to collapse
Yes It Did!!, i sent almost 3 dozen MMS after i wrote this. But now it would seem to have intermittent problems with "service denied"... it worked for me about 1hr ago, then the second MMS failed....
partial solution threads
Click to expand...
Click to collapse
Better then noting at all..... At the time of writing this guide, i had sent at least 10 MMS and confirmed receipt of said MMS's, form on network and off network users, even MMS-ed some messages to my own email! EVERY THING WORKED 100%!!
everything but MMS has been working for the EVO on Cricket and Metro for some time now.
Click to expand...
Click to collapse
Yes, that's why i sited other threads...DUH!
You are MORE then welcome to come up with YOUR own solution.....
i should have a new flash up soon that specificly targets backend MMS stuff, i hope its exactly whats needed for you all.
Just waiting for word back from whiterabbit about some mods i did to his updated script.
The new updates from him that i will incorporate will be a considerably better, and mine helps with "in network" networking, then sends anything else out via u2nl. Hope he approves my mods and then i can start work.
So far i have full TCP and ICMP traffic working via the proxy.
I was having some issues on cricket so i decided to make some mods and walah im up 100% of the time. I too was having sporadic mms working. I think it was because we were directing all traffic to u2nl which forwarded to the proxy, then it hit the MMS server, whereas with my new mods if the MMS server is available in the local network inside the proxy, it gets sent there directly.
Ill post an update when i update my thread with a new flash
Thanks token419!!
I look forward to trying your new script.
Why
For those of you which attempted this solution and are unaware, this does not provide working internet, is buggy, at best, and is Rom-dependent. MMS will be resolved and added to my tutorial as soon as I have time to iron it out.
Everything, except for MMS, has been working on the EVO since I posted posted a tutorial weeks ago.
Not to bash this tutorial - but I must say, working MMS and broken Internet is not what most people are looking for.
Cheers!

Wifi slowliness

Hello everyone,
It has been a while now that when I browse websites, reddit, etc. the images would stop loading and the pages stop charging when the WiFi is on.
When I open apps, it takes also a while to load them.
1. I don't have the issue when using 4G.
2. Other devices in my network use the same WiFi and don't experience that issue.
3. I checked threads on XDA under the op6 forum but couldn't find an answer.
4. I am running pie, and recently updated to ob10 which did not resolve the issue.
5. I ran some speed tests and the bandwidth is not a problem. I just feel that the network card on the phone stops to process requests/packets randomly.
It is quite annoying so if someone could give me pointers, I would be so grateful, I am running out of idea.
Thanks !
5t4rC0m1337 said:
Hello everyone,
It has been a while now that when I browse websites, reddit, etc. the images would stop loading and the pages stop charging when the WiFi is on.
When I open apps, it takes also a while to load them.
1. I don't have the issue when using 4G.
2. Other devices in my network use the same WiFi and don't experience that issue.
3. I checked threads on XDA under the op6 forum but couldn't find an answer.
4. I am running pie, and recently updated to ob10 which did not resolve the issue.
5. I ran some speed tests and the bandwidth is not a problem. I just feel that the network card on the phone stops to process requests/packets randomly.
It is quite annoying so if someone could give me pointers, I would be so grateful, I am running out of idea.
Thanks !
Click to expand...
Click to collapse
Is it the same using any wifi connections?
whizeguy said:
Is it the same using any wifi connections?
Click to expand...
Click to collapse
Yes it is
5t4rC0m1337 said:
It is quite annoying so if someone could give me pointers, I would be so grateful, I am running out of idea.
Thanks !
Click to expand...
Click to collapse
Did you try the "private DNS" feature available in Pie?
If not, here is the set up(two different examples)
Go to 'Network & Internet'>Advanced>Private Provider hostname, type "dns.google"(w/o quotations) then "Save"
-see if there is an improvement. Try also another private dns( this one doubles as add blocker): type "dns.adguard.com" and hit 'save'
More info and instructions on DNS-overTLS: https://developers.google.com/speed/public-dns/docs/dns-over-tls
mzsquared said:
Did you try the "private DNS" feature available in Pie?
If not, here is the set up(two different examples)
Go to 'Network & Internet'>Advanced>Private Provider hostname, type "dns.google"(w/o quotations) then "Save"
-see if there is an improvement. Try also another private dns( this one doubles as add blocker): type "dns.adguard.com" and hit 'save'
More info and instructions on DNS-overTLS: https://developers.google.com/speed/public-dns/docs/dns-over-tls
Click to expand...
Click to collapse
If I'm not mistaken, beta 11 broke the dns. Would have to use a magisk module for that atm.
whizeguy said:
Is it the same using any wifi connections?
Click to expand...
Click to collapse
mzsquared said:
Did you try the "private DNS" feature available in Pie?
If not, here is the set up(two different examples)
Go to 'Network & Internet'>Advanced>Private Provider hostname, type "dns.google"(w/o quotations) then "Save"
-see if there is an improvement. Try also another private dns( this one doubles as add blocker): type "dns.adguard.com" and hit 'save'
More info and instructions on DNS-overTLS: https://developers.google.com/speed/public-dns/docs/dns-over-tls
Click to expand...
Click to collapse
Hi,
It is working better now.
Almost flawlessly.
Thanks buddy.
Ping me your PayPal, I'd like to donate something.. .
Have a fantastic day and thanks to XDA !
5t4rC0m1337 said:
Hi,
It is working better now.
Almost flawlessly.
Thanks buddy.
Ping me your PayPal, I'd like to donate something.. .
Have a fantastic day and thanks to XDA !
Click to expand...
Click to collapse
That's very generous of you, thanks, but I can't be taking credits for other peoples work, I'm glad I could help relaying some useful info.

Hotspot not being seen by my laptop

Since the last update (10.5.8 UK?), I can start a hotspot session, but my laptop never sees it. Has anyone else experienced this? I have had it working in the past.
Any advice on how I can troubleshoot this gratefully received.
Alan
Does hotspot work for others?
Alan
It was my laptop at fault. Rebooted it and it all worked.
alan sh said:
It was my laptop at fault. Rebooted it and it all worked.
Click to expand...
Click to collapse
its easy with database editor and sq lite manager heres pics click in sq lite on apps find where i put bule lines type the mmc mnc in search when you find tether apn click find user_visable change from 0 to 1 then you see tether apn ill make thread if need ive done this on 7t and 6t heres mega link 5 pics and 2 apps used hope this helps also got to your apn in sq lite make user_editable 1 so you can enable all barriers just on this apn not tether https://mega.nz/folder/Ct0QmCTQ#2crQde4CY_z9NByLMdDpYQ
ecompton59 said:
its easy with database editor and sq lite manager heres pics click in sq lite on apps find where i put bule lines type the mmc mnc in search when you find tether apn click find user_visable change from 0 to 1 then you see tether apn ill make thread if need ive done this on 7t and 6t heres mega link 5 pics and 2 apps used hope this helps also got to your apn in sq lite make user_editable 1 so you can enable all barriers just on this apn not tether https://mega.nz/folder/Ct0QmCTQ#2crQde4CY_z9NByLMdDpYQ
Click to expand...
Click to collapse
Nope - not a clue - I think a thread to explain this would be a great help.
Alan
alan sh said:
Since the last update (10.5.8 UK?), I can start a hotspot session, but my laptop never sees it. Has anyone else experienced this? I have had it working in the past.
Any advice on how I can troubleshoot this gratefully received.
Alan
Click to expand...
Click to collapse
I think it's because of the hotspot's band that switched from 2,4ghz to 5ghz,most of the relatively 'old' laptops use just 2,4ghz,try to verify in your Hotspot's configuration to change the band from 5ghz to 2,4ghz.
Sent from my [device_name] using XDA-Developers Legacy app

Categories

Resources