Related
I've seen devs mention to flash a radio from Hboot and Fast boot before. Are these terms synonymous? Fast boot is accessed from Hboot correct? I've flashed a radio a few times, but never understood the terminology. A PD98IMG is always flashed the same way from what I understand.
More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.
Gene Poole said:
More or less correct. HBoot flashing is done with the PD98IMG.zip on the SDcard. PD98IMG.zip can contain any number of images to be flashed. Fastboot flashing is done using the fastboot.exe and can flash a single image.
Click to expand...
Click to collapse
I've never quite understood what the advantage is to fastboot flashing. Then again, I've never truly understood fastboot in general.
Something I definitely need to do more reading on.
I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance
shugga101 said:
I've tried several times, and several methods to flash my radio to the 12.54.60.25_26.09.04.11_M2 radio img. And nothing seems to be working. My best guess is its user error. I'm a noob and trying to learn how to flash my radio. I currently have the0 12.39.30.19P-26.06.04_M with the TPGB-Ninja_0618 ROM and [email protected] #28 kernel.
I've done the method where i go into adb to access bootloader, then i flash the radio.img then reboot the phone and that doesnt work. I've tried running the radio.img though CWM and that didn't work.
If I power off my phone and then hold power and -vol down to get into the bootloader it automatically will go into hboot and start to run through the PD98IMG.zip. I'm wondering.
Do I need that .zip folder on my sdcard forever or can I get rid of it?
Also, can I just switch out radio.img in the PD98IMG.zip with the new radio.img?
Can I do the above question without having all the other .img 's in the .zip folder?
I've done some research, but haven't found my answers, or was able to fix my problem.
So hopefully someone can help me.
Please be gentle with me, I'm new to this type of thing, but a fast learner.
Thanks in advance
Click to expand...
Click to collapse
Assuming the PD98IMG.zip containing the radio flashes properly, you can remove it afterwards.
Have you checked out the inspire only radio thread in the dev section, yet?
There's already a ready-to-flash PD98IMG.zip for the radio you want to flash on that thread.
Download it from that thread, verify the MD5 checksum, plop it in the root directory of your SD card, reboot into hboot/bootloader, once it finds the PD98IMG.zip, confirm the update, and away you go.
Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App
shugga101 said:
Ok I'll try that as soon as I get to my computer. Thanks for the reply and I'll let you know how it goes.
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.
Scott_S said:
Just don't forget to check that MD5. I have had incomplete (meaning...BAD) radio downloads on a solid WiFi connection, so it DOES happen from time to time.
Click to expand...
Click to collapse
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
Couple of things. 1) Be sure to give the radio long enough to "warm up"...I'ave had it take several hours after flashing before I started getting decent speeds from a radio I know works. 2) It is usually recommended to keep a copy of your radio flash on your SD card in case you need it (GPS fail, etc., ) so you can reflash if you are away from a PC, but not keep it in the root of your SD. It's very possible to end up in a continuous boot loop until you somehow either get the file off your root (SD card reader) or fool the phone into thinking it isn't there by pulling the SD card when you pull the battery to recover (I've only heard the last trick works)...
shugga101 said:
I was able to flash the radio, but all that work for nothing. I actually got worse data. But then again I could of done something wrong again.
Click to expand...
Click to collapse
You've also made sure you have the appropriate RIL for the new radio you flashed, correct? That radio thread also has the RILs + info about them, as well.
Also try rebooting more than once after flashing a radio/ril, just for good measure.
When I first flashed the 04_11_M2 radio, I had only rebooted once, as a result of the flashing process. Once my phone was done loading up, I received my first call with it, the caller couldn't hear me, but I could hear them. Caller tried calling back. Same thing. I decided to give it another flash and reboot. I called that person back, and it was working, never experienced that since.
Coincidence? Who knows? But radios are weird, quirky things that seem to need a little "voodoo" type flashing/rebooting to kick them in, I suspect.
Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is running on?
I think I found out why I am having this problem.
I can flash the radio.
I can flash the RIL.
But I have a "P" where the "U" is supposed to be to represent the HSUPA speeds.
If thats the the reason then I don't know.
shugga101 said:
Well I think I found out why I'm getting these speeds. My radio has a "P" and not a "U" like in meiguoguizi's sig. I have the same radio as that (number wise) but he has a "U" and not a "P".
The radios that I can flash have an "x" in that place so won't that just mean it will switch to whatever letter my data is runningo on?
Click to expand...
Click to collapse
I think that U/P thing is determined by one of the settings in the build.prop file. I know it's been discussed before, I just don't recall the details. If you visit the "editing the build.prop file" thread in the dev section, or possibly amongst the comments in the inspire radio thread, I think you might find the specifics in one of those places.
Or browse through henrybravo's posts, I think I remember him explaining it to someone.
Bottom line is that you have the same radio, it's just a setting that's determining the connection type and as a result, that letter changes, depending on that setting.
LeeDroid
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?
blippy said:
Today I flashed the 09.04.11_M2 that is suggested on for LeeDroid 3.2.1 and now I have lost all notification sounds, lockscreen sounds, and keyboard sound feedbacks. Can anyone help?
Click to expand...
Click to collapse
First, try another re-flash of the radio.
I did a full wipe and restore and got all the sounds back. Reloaded the RIL and everything works fine.
Sent from my Desire HD using XDA App
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Lol. Autocorrect really has the hots for you.
Lol sorry I was on my mobile and left too much to swift key X. I'll proof read next time!
Pick_A_Name said:
Yes the x is a placeholder (remember your algebra).
Open he's right. You have to flash the Riley that goes with the radio and then reboot twice. Make sure you are using the best radio for your Rome.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Rileys and Romes....I can dig it
when I try to install my radio it sends but it wont write please help I don't understand why.
What do you mean it sends but it won't write? What are you downloading and from where? What rom are you on? Are you s off?
I have successfully installed Android Revolution and I am attempting to install the radio that has been suggested to go with it. After downloading the radio and putting it in its own folder, on my computer, I open the "read me" portion of the radio file, and it looks as follows:
--=[ How to flash a radio ]=--
This guide is for Windows users only! Your phone must be ENG S-OFF. Radio S-OFF is also highly recommended.
Requirements:
- HTC Sync
- A Windows PC
1. Connect your phone into a PC, and make sure that USB Debugging is enabled
2. Click "Start here". A black command prompt window will open
3. Type: "adb reboot bootloader"
4. Once your phone is in bootloader (white screen with text), type "fastboot flash radio radio.img"
5. When the flashing completes, type "fastboot reboot"
6. Done. Enjoy!
I follow the step to bootload and when I type in "fastboot flash radio radio.img" it gives me this:
sending 'radio' (24960 KB)... okay [ 4.134s]
writing 'radio'... FAILED (remote: not allowed)
I am confused about what I have done wrong. I have used other ROMs and Radios so I might have messed something up along the way.
bart2278 said:
I follow the step to bootload and when I type in "fastboot flash radio radio.img" it gives me this:
sending 'radio' (24960 KB)... okay [ 4.134s]
writing 'radio'... FAILED (remote: not allowed)
I am confused about what I have done wrong. I have used other ROMs and Radios so I might have messed something up along the way.
Click to expand...
Click to collapse
I use the Pd98img.zip way.... so much simpler.
Sent from my Inspire 4G using Tapatalk
what is that?
Youngunn2008 said:
I use the Pd98img.zip way.... so much simpler.
Sent from my Inspire 4G using Tapatalk
Click to expand...
Click to collapse
especially since using the fastboot method requires ENG S-OFF...and is very risky
I have the ENG S-OFF but I don't like the risky part. I am what some would call a "n00b"
bart2278 said:
what is that?
Click to expand...
Click to collapse
Please, search for the inspire radio thread. In there is every available radio and matching ril combo, and the radio is in the pd98img.zip format for you. Put it in the root of your sd card, then boot into the bootloader. It'll ask you to apply update press vol up...
A good question tho is do you really need to update your radio?
Sent from my Inspire 4G using Tapatalk
Using the Eng s off method can give you a brick. It's just a possibility.
Sent from my Inspire 4G using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1106324
Inspire Radio Thread [OP Updated July 12, 2011]
Sent from my Inspire 4G using Tapatalk
To get into bootloader, you can power off phone, then hold vol down and power until it comes up.
Sent from my Inspire 4G using Tapatalk
From what I read I do need this matching radio. my radio as of now is from TPC Inspire 4G and I would like to switch it over to Android revolution specific radio.
bart2278 said:
From what I read I do need this matching radio. my radio as of now is from TPC Inspire 4G and I would like to switch it over to Android revolution specific radio.
Click to expand...
Click to collapse
OK well go to the radio thread and find the radio you want and flash it, but also flash the ril. You use recovery to do that.
Sent from my Inspire 4G using Tapatalk
I'm brain dead. I was trying to use the radio file that AR had provided. I Didn't know the radio file on the radio thread and the radio file from AR was different, but it is and I have successfully flashed my radio. I already tried the radio thread earlier today, but I wasn't using the right radio file. Youngunn I greatly appreciate your help you have thwarted a cerebral aneurysm on my part. Again thank you sir.
bart2278 said:
I'm brain dead. I was trying to use the radio file that AR had provided. I Didn't know the radio file on the radio thread and the radio file from AR was different, but it is and I have successfully flashed my radio. I already tried the radio thread earlier today, but I wasn't using the right radio file. Youngunn I greatly appreciate your help you have thwarted a cerebral aneurysm on my part. Again thank you sir.
Click to expand...
Click to collapse
No problem. We were all newbs at one time
Sent from my Inspire 4G using Tapatalk
best thing you can do is read read read then read some more lol there are lots of threads about roms,radios etc. and the best way to understand what you are doing is to read and learn. there are several diffrent radios avalible for this phone. but that doesnt mean the recommended one is the best for you .the suggested radio might work very well in one part of the world and then totally different in another part of the world. the best thing to do is read thru the inspire radio thread and people usually post where they live and what radio and ril work the best in that area .just find one you like try it for a couple days and if works well good if not try another one .its just trial and error to find one that works well in your area hope this helps
rayford85 said:
best thing you can do is read read read then read some more lol there are lots of threads about roms,radios etc. and the best way to understand what you are doing is to read and learn. there are several diffrent radios avalible for this phone. but that doesnt mean the recommended one is the best for you .the suggested radio might work very well in one part of the world and then totally different in another part of the world. the best thing to do is read thru the inspire radio thread and people usually post where they live and what radio and ril work the best in that area .just find one you like try it for a couple days and if works well good if not try another one .its just trial and error to find one that works well in your area hope this helps
Click to expand...
Click to collapse
+1 well put.
Sent from my Inspire 4G using Tapatalk
Alright, so we all know it's confusing to differentiate the One XL from the One X, especially since Rogers and AT&T insist on calling it the One X.
IF YOU HAVE A "ONE X" FROM ROGERS/AT&T, YOU HAVE THE ONE XL. DON'T EVEN BOTHER VISITING THE ONE X FORUMS.
Now, you've gone and downloaded CWM from the One X forums and flashed it to your One XL, and you're semi-bricked. Let's get you out of that pickle. Please note that I have not done any of this to my own One XL, as there's no ROMs or custom recovery images or kernels for our phone yet. However, just this morning I performed a similar operation on my Jetstream, and the steps will be identical. I take no responsibility for any problems you experience.
First, you'll need to download the leaked RUU that can be found here: http://forum.xda-developers.com/showthread.php?t=1550930
EDIT: designgears has offered a newer recovery image. I'm not sure what advantages it would bring, but at least there's a second option: http://www.gigashare.in/53885
Please note that this is marked as the AT&T RUU, so there's no guarantee this will work for Rogers. However, your recovery mode is screwed anyway, so in my opinion, it couldn't hurt to try.
Once you've downloaded the RUU, run it. You don't need to install the RUU itself, we just have to have the application running. Once running, it'll create a "rom.zip" file in a temp folder somewhere in your user profile. While the RUU is open, just search for "rom.zip" and you should find it. Open this file and extract "recovery_signed.img" to your computer, into the same folder as your "fastboot" application. Once you've done this, close the zip file and exit the RUU.
Now, boot your device into fastboot mode
Code:
adb reboot bootloader
Once in bootloader mode, you may need to select "fastboot" from the menu.
Now that you're in fastboot mode, you can flash the recovery we extracted from the RUU:
Code:
fastboot flash recovery recovery_signed.img
Your screen will go through a couple brief steps, something like "sending recovery_signed.img" then "writing recovery_signed.img" and then "OK."
Try to boot into recovery now, and you should see the standard HTC recovery mode!
I really hope this helps everyone out. I'll iterate again that I have no tried this with my One XL, so I have no actual proof that this will work. But, if you've already flashed the wrong recovery image, you should be somewhat familiar with these steps already.
EDIT: Please post your success with this method. As I haven't tested, I'd like to know if everything's kosher, and I can change the instructions accordingly if something's wrong.
Hey, sorry I didn't get back to you sooner, went to bed.
Here is just the recovery image for a newer, unreleased leak.
http://www.gigashare.in/53885
1.61.502.1 CL49502
designgears said:
Hey, sorry I didn't get back to you sooner, went to bed.
Here is just the recovery image for a newer, unreleased leak.
http://www.gigashare.in/53885
Click to expand...
Click to collapse
Heh, don't apologize to me, my phone's locked and running fine. (I've had the phone since Friday... I think this is the longest I've ever gone without rooting an Android phone.)
I'll put that link up in the first post, thanks!
EDIT: Oh! And is that AT&T or Rogers?
craig0r said:
Heh, don't apologize to me, my phone's locked and running fine. (I've had the phone since Friday... I think this is the longest I've ever gone without rooting an Android phone.)
I'll put that link up in the first post, thanks!
EDIT: Oh! And is that AT&T or Rogers?
Click to expand...
Click to collapse
It's AT&T recovery.
Flashed but still having trouble. Got into recovery but can't boot.
Going to see if re-locking the bootloader may help. Only thing different I've done is that I ran that flash_boot.zip thing that Leedroid had on his page. It just seems to push a boot.img file and clear the fastboot cache.
Does anyone have that particular boot.img file? Pretty please?
For myself I will leave it for now and wait until an official rogers RUU or custom recovery to make sure I don't break it again
Sent from my HTC One X
bongd said:
Flashed but still having trouble. Got into recovery but can't boot.
Going to see if re-locking the bootloader may help. Only thing different I've done is that I ran that flash_boot.zip thing that Leedroid had on his page. It just seems to push a boot.img file and clear the fastboot cache.
Does anyone have that particular boot.img file? Pretty please?
Click to expand...
Click to collapse
The rom.zip file from the AT&T ruu should have the boot.img file in it. you can flash it with
Code:
fastboot flash boot boot.img
However, the boot partition is a WEE bit more critical to the phone's function than the recovery partition. Dunno if I'd be flashing it myself, at least not to a Rogers phone.
Sent from my HTC One X using xda premium
craig0r said:
The rom.zip file from the AT&T ruu should have the boot.img file in it. you can flash it with
Code:
fastboot flash boot boot.img
However, the boot partition is a WEE bit more critical to the phone's function than the recovery partition. Dunno if I'd be flashing it myself, at least not to a Rogers phone.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thanks, man. Someone said they flashed the entire RUU to their Rogers phone so I don't think it could be too harmful.
I only have my Ubuntu machine and Wine is being fussy and not extracting the rom.zip archive properly. I'll see if something gets released soon. I rarely see Rogers RUU so hopefully I'm not waiting too long. Reactivated my SIM for my Galaxy Nexus but still sad lol
I feel your pain!
bongd said:
Thanks, man. Someone said they flashed the entire RUU to their Rogers phone so I don't think it could be too harmful.
I only have my Ubuntu machine and Wine is being fussy and not extracting the rom.zip archive properly. I'll see if something gets released soon. I rarely see Rogers RUU so hopefully I'm not waiting too long. Reactivated my SIM for my Galaxy Nexus but still sad lol
Click to expand...
Click to collapse
I've been in the same boat brother, minus flashing the boot.img file. Did you end up resolving/unbricking your XL? If not, I can extract the boot.img from my Rogers phone if that would help.
Btw, I haven't been on the forums in a couple of days, but I caught wind of your predicament and I'm surprised at the trouble you've had recently asking for help in this matter. Some people are ridiculous!
Truth is, we have this pretty new device that we want to take advantage of! We got excited, and f'd up. Anyhow, let me know if I can help.
krepler said:
I've been in the same boat brother, minus flashing the boot.img file. Did you end up resolving/unbricking your XL? If not, I can extract the boot.img from my Rogers phone if that would help.
Btw, I haven't been on the forums in a couple of days, but I caught wind of your predicament and I'm surprised at the trouble you've had recently asking for help in this matter. Some people are ridiculous!
Truth is, we have this pretty new device that we want to take advantage of! We got excited, and f'd up. Anyhow, let me know if I can help.
Click to expand...
Click to collapse
That would be freakin' wicked, man. Recovery works but that darn boot.img probably needs replacing. If you could pull stock recovery too that might help as well.
Been a bad day lol... broke my hand on cement earlier too so this is appreciated. Ouch, knuckle is all over the place. Hopefully I get this phone workjing soon to take my mind off things LOL
bongd said:
That would be freakin' wicked, man. Recovery works but that darn boot.img probably needs replacing. If you could pull stock recovery too that might help as well.
Been a bad day lol... broke my hand on cement earlier too so this is appreciated. Ouch, knuckle is all over the place. Hopefully I get this phone workjing soon to take my mind off things LOL
Click to expand...
Click to collapse
Ok, I'm in the middle of downloading the evita leaked files. I can't extract it from my phone since I need root... unless you know a way other than adb shell? Either way, I don't think you can access it without root. I've tried a few ways with no luck.
I see you can't access the evita files so the best I can do for you is extract it from there for you. Download is slow as hell, so bear with me!
krepler said:
Ok, I'm in the middle of downloading the evita leaked files. I can't extract it from my phone since I need root... unless you know a way other than adb shell? Either way, I don't think you can access it without root. I've tried a few ways with no luck.
I see you can't access the evita files so the best I can do for you is extract it from there for you. Download is slow as hell, so bear with me!
Click to expand...
Click to collapse
No need to ask for my patience, bro. It's hugely appreciated! Thanks a ton!
bongd said:
No need to ask for my patience, bro. It's hugely appreciated! Thanks a ton!
Click to expand...
Click to collapse
My new issue is I'll have to make a couple more posts before I can add urls to them, since I never post on the forums. Gotta start somewhere...
Scratch that, you the good 'ol copy and paste.
http://www.gigashare.in/d4129 = HTC One XL AT&T 1.44.502.1 Radio 0.15.3201.09 recovery_signed.img
http://www.gigashare.in/8adee = HTC One XL AT&T 1.44.502.1 Radio 0.15.3201.09 boot_signed.img
krepler said:
My new issue is I'll have to make a couple more posts before I can add urls to them, since I never post on the forums. Gotta start somewhere...
Scratch that, you the good 'ol copy and paste.
http://www.gigashare.in/d4129 = HTC One XL AT&T 1.44.502.1 Radio 0.15.3201.09 recovery_signed.img
http://www.gigashare.in/8adee = HTC One XL AT&T 1.44.502.1 Radio 0.15.3201.09 boot_signed.img
Click to expand...
Click to collapse
and the latest:
http://www.gigashare.in/0029e = Cingular 1.68.502.1 Radio 0.16.32.09.01 boot_signed.img
http://www.gigashare.in/03695 = Cingular 1.68.502.1 Radio 0.16.32.09.01 recovery_signed.img
Should've just waited and posted these ones... buuuuuuut, I have no patience.
Hopefully the boot.img works for you! Let me know how she goes.
bongd said:
That would be freakin' wicked, man. Recovery works but that darn boot.img probably needs replacing. If you could pull stock recovery too that might help as well.
Been a bad day lol... broke my hand on cement earlier too so this is appreciated. Ouch, knuckle is all over the place. Hopefully I get this phone workjing soon to take my mind off things LOL
Click to expand...
Click to collapse
Bongd, The recovery works for you? My situtation is in the same boat with Krepler minus the boot.img. I am little bit worry if I load the AT&T recovery and that will conflict the boot.img in Rogers phone.
---------- Post added at 07:25 AM ---------- Previous post was at 07:22 AM ----------
krepler said:
I've been in the same boat brother, minus flashing the boot.img file. Did you end up resolving/unbricking your XL? If not, I can extract the boot.img from my Rogers phone if that would help.
Btw, I haven't been on the forums in a couple of days, but I caught wind of your predicament and I'm surprised at the trouble you've had recently asking for help in this matter. Some people are ridiculous!
Truth is, we have this pretty new device that we want to take advantage of! We got excited, and f'd up. Anyhow, let me know if I can help.
Click to expand...
Click to collapse
Krepler, Can you tell me how did you solve your recovery? I am in your sisutation as well, flash the wrong recovery and once I boot to recovery and it will occur the boot loop, however I am still able to use the One X (Semi-bricked). Did you flash the stock recovery from Rogers or the one that you just posted from AT&T?
Elin28 said:
Bongd, The recovery works for you? My situtation is in the same boat with Krepler minus the boot.img. I am little bit worry if I load the AT&T recovery and that will conflict the boot.img in Rogers phone.
Click to expand...
Click to collapse
One does not interfere with the other. Recovery is pretty much its own operating system, completely segregated from the rest of the phone. It can neither hinder nor enhance the booting of your phone in normal mode. You could theoretically flash a random sequence of ones and zeros to the recovery partition, and the phone would continue to boot just fine. Until you try and go into recovery mode that is. Flashing the recovery_signed.img as per my instructions is safe in regards to the phone's normal operation. I can't promise that it's a working recovery, however, as I've not tried it myself.
Awesome! Just booted up, my man. A thousand fellatios to you!! Please message me your Paypal address so I can buy you a beer or two.
Haven't tried the Cingular ones but the AT&T ones worked just fine. I'm betting it'll be damn near identical, save probably a few radio adjustments or very minor adjustments.
Booted to the main screen so I should be able to set things up. But I'll chime in and report if there are any major issues. Thanks again!!
Hey I am happy your phone boot up man!!
I am still having trouble with the recovery. I try flash the att& the cingular recovery. good thing is no bootloop I see an image showing black phone and a green circle. then I end up with image of a phone with red triangle with a "!" inside. and then the phone reboots.
am I doing something wrong?
Thanks
bongd said:
Awesome! Just booted up, my man. A thousand fellatios to you!! Please message me your Paypal address so I can buy you a beer or two.
Haven't tried the Cingular ones but the AT&T ones worked just fine. I'm betting it'll be damn near identical, save probably a few radio adjustments or very minor adjustments.
Booted to the main screen so I should be able to set things up. But I'll chime in and report if there are any major issues. Thanks again!!
Click to expand...
Click to collapse
@bongd
Awesome bro!!!! Glad you got your hox up and running.
Sent from wherever I am!
yoohoohoo said:
Hey I am happy your phone boot up man!!
I am still having trouble with the recovery. I try flash the att& the cingular recovery. good thing is no bootloop I see an image showing black phone and a green circle. then I end up with image of a phone with red triangle with a "!" inside. and then the phone reboots.
am I doing something wrong?
Thanks
Click to expand...
Click to collapse
Have you tried running "fastboot erase cache"?
What other steps have you done as well? The killer for me was the boot.img file that Leedroid created as part of his ROM installation. The AT&T recovery is what I had used. For a moment I thought I might need to try flashing the system.img file like redwreck had to, but I didn't need to.
Perhaps someone could upload that as well, please? If you need to flash that, it's "fastboot flash system system.img" and it'll flash that too. I always do "fastboot reboot" after as well.
I trust that these should work. Hopefully there'll be a full Rogers RUU so we can flash that just to be on the safe side. Best of luck! I'll keep an eye on this thread as well.
Since I posted earlier I've been setting things up and it's working like a damn charm. Tried exhausting every weird and quirky feature I thought might screw up, but I can't find anything that's not working.
I've been running CM9 for a few weeks now, but have decided that I want to get S-Off and open the phone's capability up some more... Anyway, I'm on a MT4GS:
HBOOT 1.45.0013
Nov 21 2011 build
Tried flashing this https://www.cx.com/mycx/share/O2W61....00_11.16.3504.20_2_release_245247_signed.zip
from weekendsr2short's mirror page (http://forum.xda-developers.com/showthread.php?t=1878329) of Blue6ix's stuff...(i tried autoflashing from the bootload/fastboot screen)
anyway, it loads up like it is going to actaully flash, but nothing changes on the Bootloader screen. The phone is unlocked via HTC's tool and is rooted. Any help is greatly appreciated! Please lemme know if any more info is needed.
Josh
more to it than flashing an hboot
read up on THIS
SurfRodder said:
I've been running CM9 for a few weeks now, but have decided that I want to get S-Off and open the phone's capability up some more... Anyway, I'm on a MT4GS:
HBOOT 1.45.0013
Nov 21 2011 build
Tried flashing this https://www.cx.com/mycx/share/O2W61....00_11.16.3504.20_2_release_245247_signed.zip
from weekendsr2short's mirror page (http://forum.xda-developers.com/showthread.php?t=1878329) of Blue6ix's stuff...(i tried autoflashing from the bootload/fastboot screen)
anyway, it loads up like it is going to actaully flash, but nothing changes on the Bootloader screen. The phone is unlocked via HTC's tool and is rooted. Any help is greatly appreciated! Please lemme know if any more info is needed.
Josh
Click to expand...
Click to collapse
If you're rooted, install a stock-based ROM and then use juopunutbear.
blackknightavalon said:
If you're rooted, install a stock-based ROM and then use juopunutbear.
Click to expand...
Click to collapse
OK, that's what I was hoping to do. I noticed in the JB instructions that it said I must be a stock RUU not a custom ROM or something to that effect. I am on CWM 5.Something so a rom flash is NP. Any recommended ROMs? I.e One that worked for you? I tried the wire trick about 100 times over the course of an hour or so(on cm9.1), but then reread the bit shout the rom again.
Thanks for all the responses so far!
Any stock based ROM will do. I went with MikTouch myself and it worked like a charm! (on the 4th try so be patient....)
demkantor said:
more to it than flashing an hboot
read up on THIS
Click to expand...
Click to collapse
Thanks, after reading that thread <again> it linked me the this http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24
Which I have Also already read,but noticed this time that I cannot be unlocked via HTC and still flash pg59imgs... so im off to relock, if the stock rom method doesn't work...
WeekendsR2Short said:
Any stock based ROM will do. I went with MikTouch myself and it worked like a charm! (on the 4th try so be patient....)
Click to expand...
Click to collapse
Awesome, thanks brotha
well, one down, one to go. I have my phone all dialed in...now its time to fix my wife's... Thanks again Gents! (& Ladies, as applicable!)
edit: well, hers is done now... I ended up using another SD card, the original one I tried was kinda old, but the newer one I normally use worked on the 2nd try... didnt lose any data either... her sd card on the other hand was toasted and needed to be reformated... anyway, both phones are now S-Off!!
SurfRodder said:
well, one down, one to go. I have my phone all dialed in...now its time to fix my wife's... Thanks again Gents! (& Ladies, as applicable!)
edit: well, hers is done now... I ended up using another SD card, the original one I tried was kinda old, but the newer one I normally use worked on the 2nd try... didnt lose any data either... her sd card on the other hand was toasted and needed to be reformated... anyway, both phones are now S-Off!!
Click to expand...
Click to collapse
Man, that's GREAT! Once you knew HOW, the process was nothing for you. That's a far cry from most. Way to go!
WeekendsR2Short said:
Man, that's GREAT! Once you knew HOW, the process was nothing for you. That's a far cry from most. Way to go!
Click to expand...
Click to collapse
yeah, Ive been running root since my MT3G way back when...couldnt stand how laggy that thing was with all the bloat... wasnt even that great with CM6 but still night and day better than stock (=hooked on rooting). then upgraded to the MT4g and now this thing... was fairly concerned about all the extra hoops but wouldve just chosen another platform had I borked it...glad I didnt, saved me some funds!
On a related note, what radios are you guys running? Are there any issues between the GB radios and ICS ones? Im assuming so, but with the custom ROMs/kernels anything should be able to be overcome I'm hoping... I know I def. had issues on CM7 -> CM9 on the reg. 4G when swapping radios...
I don't generally swap my radios around since there are only two that I'm aware of. But I DID find that the new one (when I replaced my phone) seemed to lock a signal a bit quicker but for me the original radio gets MUCH better phone reception. Depends on your phone I suppose.
(you'll be glad you went with this phone though. basically a Sensation with a keyboard)
WeekendsR2Short said:
I don't generally swap my radios around since there are only two that I'm aware of. But I DID find that the new one (when I replaced my phone) seemed to lock a signal a bit quicker but for me the original radio gets MUCH better phone reception. Depends on your phone I suppose.
(you'll be glad you went with this phone though. basically a Sensation with a keyboard)
Click to expand...
Click to collapse
cool, I just flashed the older one today... been having really crappy recption on campus lately (esp. since switching from the MT4G) better reception is what I'd rather have... ill give this one a week or so and see if I think its any better... I like the phone a lot already... i still use the soft keyboard from time to time as I forget the other one is there, but it comes in really handy on certain sites...
Hello guys, I've been lurking the forums for hours trying to find a thread with an issue close to mine, and this is the closest I got. I followed all the necessary steps on the first page, but the problem I'm having is when I try to flash the PG59IMG.zip file, it says "Loading... PG59IMG.zip", but then it says "Checking....PG59IMG.zip" and afterwards it says "Wrong zipped image!" Any ideas what it could mean? I just want to get it back to stock. Any help is greatly appreciated.
THIS MAY HELP YOU
Thanks for the link. It said I need to relock the phone in order to flash the image, but when i type "fastboot oem lock" into command prompt, I get a message saying 'fastboot' is not recognized as an internal or external command, inoperable program or batch file." I'm guessing this means my fastboot wasn't set up correctly, but I don't know where to go from here. As always, thanks again for any help or advice.
The third post in this thread
http://forum.xda-developers.com/showthread.php?p=27796375
It was made for the g2 so don't use the drivers in it, but it will at least give you an idea of what to do
Sent from my HTC Vision using xda premium
Hanenbow said:
Thanks for the link. It said I need to relock the phone in order to flash the image, but when i type "fastboot oem lock" into command prompt, I get a message saying 'fastboot' is not recognized as an internal or external command, inoperable program or batch file." I'm guessing this means my fastboot wasn't set up correctly, but I don't know where to go from here. As always, thanks again for any help or advice.
Click to expand...
Click to collapse
Does fastboot work like this
./fastboot oem lock
On my PC some of my fastboot commands need that.
Sent from my Freaked out JellyBean
Thanks so much for your help guys. I followed the instructions on the pathing link, and the phone is currently flashing the image. I'll post a final time once I can confirm everything is fine.
I bought this phone off ebay and I got two batteries. I am wondering if it is just me butt the seller said the battery was a month old and this thing won't last 3 hours off normal continuous use.and sometimes it just shuts off without giveing me a battery message, of any kind (when im doing something battery intensive)
Also before I knew about the chip issues I flashed and all.I used the method on unlockr.com and when I reached the part to get s off the root.sh wouldn't give me s off so some where in the comments I found a g free script ran it in the terminal emulater in the placer of root.sh and then returned to unlocker and continued to flash with visionary.apk and all is well. Flashed a few roms but im itching to flash like hell as that's, what I'm use to, so is it a case where the chip gets worse everytime I flash or can it go any time? Does it have to go?
I have read the posts and just need a little more clarity.
RUDE COMMENTS ARE NOT WELCOMED
sent from my doomed chip HTC glacier or mytouch 4g
xanda143 said:
I bought this phone off ebay and I got two batteries. I am wondering if it is just me butt the seller said the battery was a month old and this thing won't last 3 hours off normal continuous use.and sometimes it just shuts off without giveing me a battery message, of any kind (when im doing something battery intensive)
Also before I knew about the chip issues I flashed and all.I used the method on unlockr.com and when I reached the part to get s off the root.sh wouldn't give me s off so some where in the comments I found a g free script ran it in the terminal emulater in the placer of root.sh and then returned to unlocker and continued to flash with visionary.apk and all is well. Flashed a few roms but im itching to flash like hell as that's, what I'm use to, so is it a case where the chip gets worse everytime I flash or can it go any time? Does it have to go?
I have read the posts and just need a little more clarity.
RUDE COMMENTS ARE NOT WELCOMED
sent from my doomed chip HTC glacier or mytouch 4g
Click to expand...
Click to collapse
If the chip dies there will be likely be no warning. It will simply fail. Most don't. There are a lot of us with the "bad" eMMC that have flashed hundreds or even thousands of times.
I would flash a new ROM and compare battery life and behavior.
estallings15 said:
If the chip dies there will be likely be no warning. It will simply fail. Most don't. There are a lot of us with the "bad" eMMC that have flashed hundreds or even thousands of times.
I would flash a new ROM and compare battery life and behavior.
Click to expand...
Click to collapse
Ok I'm feeling a but more comfy now.and obviously I won't blame you should something go wrong. Thanks.makes no sense living in fear might as well enjoy it while it lasts
sent from my doomed chip HTC glacier or mytouch 4g
xanda143 said:
Ok I'm feeling a but more comfy now.and obviously I won't blame you should something go wrong. Thanks.makes no sense living in fear might as well enjoy it while it lasts
sent from my doomed chip HTC glacier or mytouch 4g
Click to expand...
Click to collapse
If your on stock battery will probably suck. It did for me
Sent from my HTC myTouch 4g using xda app-developers app
N_otori0us_ said:
If your on stock battery will probably suck. It did for me
Sent from my HTC myTouch 4g using xda app-developers app
Click to expand...
Click to collapse
yeah i notied the huge diffrence when i switched to the viper rom........haveing a little trouble finding a compatible kernel that will give me smartass v2 tho.
quick question does a nandroid backup also backup the kernel that i was on when i made the backup?
crap i made a mistake and flashed a wrong kernel(fusion dragon and now the phone dosnt want to boot into recovery). i think the kernel was for the one S i didnt notice that. Anyway i know androids so am not worried about anything except my emmc chip can anyone give me the fastbood instructions to flash the various things on the glacier or are they the same for all phones also. a kernel that i can flash the will work with this viper rom would be nice.
i was trying fastboot flash zip rom.zip and that fails.
was really trying to avoid haveing to flash a PDM15.img but it as that would erase my ext4 recovery which i figure isnt working because the kernel i flashed was not for the phone and being touch based is messed up. so anyone knoe the fastboot commands to flash a rom in its zip form
xanda143 said:
crap i made a mistake and flashed a wrong kernel(fusion dragon and now the phone dosnt want to boot into recovery). i think the kernel was for the one S i didnt notice that. Anyway i know androids so am not worried about anything except my emmc chip can anyone give me the fastbood instructions to flash the various things on the glacier or are they the same for all phones also. a kernel that i can flash the will work with this viper rom would be nice.
i was trying fastboot flash zip rom.zip and that fails.
was really trying to avoid haveing to flash a PDM15.img but it as that would erase my ext4 recovery which i figure isnt working because the kernel i flashed was not for the phone and being touch based is messed up. so anyone knoe the fastboot commands to flash a rom in its zip form
Click to expand...
Click to collapse
Download the 4ext recovery image and
fastboot flash recovery recovery.img
Then boot into recovery and try flashing the zips. If you can't find the recovery.img, cwm images are available. You can easily switch back to 4ext later.
estallings15 said:
Download the 4ext recovery image and
fastboot flash recovery recovery.img
Then boot into recovery and try flashing the zips. If you can't find the recovery.img, cwm images are available. You can easily switch back to 4ext later.
Click to expand...
Click to collapse
i already have fastboot flash zip PD5IMG.zip and it worked ok and gave me back clockwork and official sesnse but should flashing an incompatible kernel damaged my recovery? seems flawedish seeing as i always saw recovery mode as my safe heaven. being its a touch recovery i can understand tho. if i had not flashed a eng bootloader i probly would have been screwed now. well lesson learned any info on a kernel that can work with the viper rom android 4.04 sense?
xanda143 said:
i already have fastboot flash zip PD5IMG.zip and it worked ok and gave me back clockwork and official sesnse but should flashing an incompatible kernel damaged my recovery? seems flawedish seeing as i always saw recovery mode as my safe heaven. being its a touch recovery i can understand tho. if i had not flashed a eng bootloader i probly would have been screwed now. well lesson learned any info on a kernel that can work with the viper rom android 4.04 sense?
Click to expand...
Click to collapse
Not sure about the kernel. I can tell you that different devices have different partition setups. The bootloader, system, recovery, etc. don't reside on the same partitions on every device. In fact, doing what you did can cause a hard brick on many devices.
what kernal did you use?
kkm323 said:
what kernal did you use?
Click to expand...
Click to collapse
The kernel wasn't for this phone so he got messed.
Sent from my myTouch 4g using xda app-developers app