Hello, i have a HTC wizard with WM 5, and i want to install a new ROM like WM 6.5, i tryed to follow the tutorial but i got nothing, can anybody help me?
My pc is using windows 7, what program should i have? what rom should i have?
My phone has IPL starting with 1 but SPL starting with 2 i think this is wird. PLease help me i do not know what to do, and i need a new ROM.
I got a ROM, i put the phone in bootlouder mode the screen had 3 colors then i put the usb in the phone then double clicked on the ROM and nothing happend, i am asking for some help please!
Related
Hi,
I' am trying to put another rom on my MDA, but i get no message on the screen from what version to the new version after it get the information from the device.
It's complete blanc it's show nothing on what radio and rom en also the new rom what it's radio and rom.
All this after i run the Maupgradeut-noID.
Plz. help me.
Thnx,
Alfa156
First, you must connect to desktop using ActiveSync, than start Maupgradeut-noID.
Hi,
Maybe I was not explain my problem clearly.
With this picture maybe it makes it more claerly.
After I run MaupgradeUt-NoID I get this screen which it's shown
nothing about which rom version.
And then when I do the upgrade button I get the screen with
"waith untill... and do not disconnect..." this screen stays.
Please somebody help me, I am desperatly.
Thnx,
Alfa156
Hi.
The same happens to me with my new MDA compact II.
I think it is something to with the windows mobile 2005. you will be aware that this device is different from the classic Magician.
Tell me if this is your problem as well.
Hi MKHAIRYM,
My device has not windows mobile 5.
It was working with the windows CE 2003
Thnx,
Alfa156
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
THere are many posts like this.
Did u do your reading before flashing? Are you using Vista, if so get on a computor running XP, u cannot flash with vista.
Did you unplugg all ur usb devices and any other connection software? Try also other usb ports. I had to try 3 of my 4 before flashing worked for me.
Please read the wiki and search the forums tho, there are many good guides out there like this one attached (apols for zip file, i had saved the web page for use ages ago)
You also dont say what ur IPL/SPL numbers are so its difficult to help, you should list the steps when posting if you need help
Get back if you need more help...
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hi, I had similar problem even after repeated tries. What I did to get around it was:
1) Run the HardSPL (from Prophet tools or from RUU).
2) Check "I understand the caution..." and click next to get to 2nd screen (see attachment) on RUU where it gives you the 4 things to check before proceeding (here your Prophet must be entering the white screen).
3) Leave the RUU on the 2nd screen on the computer and disconnect Prophet after white screen gets stuck and activesync disconnects).
4) Reboot Prophet.
5) Reconnect Prophet and wait for activesync connection to be established.
6) Now on the computer check "I completed the steps indicated above" and click on next.
Hopefully this should go ahead and HardSPPL your Prophet.
Do let us know if this worked.
possible solution for ya
Code:
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
Hey,same problem here...but you probably got rid of the prophet already...well hope it helps someone else
thank God i had surfed to other sites and found this HARD SPL utility.
Its in "wm6 Update_Package" ...might as well be from here..
(dont know who made it-i`ve been downloading so much stuff lately from the web no offence )
maan...how do I add an attacment here?
ahah-here it is..
hey...what`s up with this...cant upload...its under 8mb,why is it bugging me with "upload of file failed"?
ok...this means war..
anyway here is the link http://rapidshare.com/files/233302800/HardSPL_G3_and_G4.rar.zip.html
ginbuko said:
Im Using Imate Jamin (g4) And I Wanted To Upgrade To Wm6.1, While Running The Hard Spl My Phone Turns To White Screen.. And Active Sync Doesnt Recognise My Phone Any More... Pls Help Me Guys..
Click to expand...
Click to collapse
pinoy ka gin???
text mko kung malapit ka lang sa manila.. help kita...
09085524216
Hi
where i can download hardspl for g4?
my prophet was working normaly and while i was installing a program it stoped. i formated it and reinstalled the windows but what happened is:
1-it doesnt recognize the memory card anymore
I thought it is rom problem , i tried to install anothere rom but THERE IS NO 3 colour screen but the prophet is working
please any body have idea about this problem reply .
have u done hardspl? try flashing another rom..
i tried hardspl but it didnt continue the process
while i was doing hardspl my prophet turnedoff
thank blusilv for reply
where is the help??????????????
Listen up
First off all charge the battery for 2 hours before doing this.
After turn on the device and press for 5 seconds the com button on the left side of the device.
You will enter the 3 colours loader.
Connect the device to the PC.
Step 2 Install the original Rom
Step 3 Do a Rom update use step 2 of pdamobiz Rom, select update rom file and wait.
Step 4 Do a hardspl G3 or G4 see your device to see witch one is it.
Step 5 install a new Rom with the RUU update utility G3 or G4.
Then you just have to wait the device to reboot and you can use it.
Note: Use the 2.19 radio Rom its the most stable, you can install it after installing the final Rom ok.
Any questions feel free ok bye.
i am sorry but i thought the three colour screen meens bootloader my problem now that i cant change this rom as it dont recognize the memory and also there is prblems with bluetooth.
thanx deltav but ineed more help
Listen up that procedure i explained would put the PDA working 100%, if you have the problems you say you do, its because you installed a rom inappropriate for you device. The memory and bluetooth problems come from bad radio rom and from roms that are not suitable for the device, you mad bad installations, that is the real origin for your problems, if you want to stay with your device with problems fine, in my opinion the best is to put the original rom in and after that, do the rest of procedure if you don´t want to this its up to its your device not mine.
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Hello,
Same problem here, no 3-color screen appears when I start or reset and press the comm button on the side.
help for me and seichi please
OK guys after beeing in bootloader mode do a g3 or g4 update with a new rom don´t forget to connect the usb cable correctly, see if it works, if it does not tell me what are your problems, bye.
drdisho said:
i tried what you said deltav but the problem is there is no 3 color screen and i tried almost all tools of ubgrading and downgrading but i cant remove this rom from my prophet my prophet is G3.
thanks for help but more please
Click to expand...
Click to collapse
Listen did you charge the device for 4 hours first on the electricity - step 1
Do a hard reset with the stylus on the device - step 2
press the left com button for 5 seconds on the device, before anything appears on screen - step3
If everything goes well the 3 colour screen will appear.
Hi everyone;
I have hp rw 6815 ı tried to upgrade windows mobile 5 to 6.1 but i couldnt.ı read that the bootloader vers should be 1.01 not 1.05 so ı downgrade my bootlader but now the phone looks like 6818 and the left part of the screen is missing and ı cant sync with the pc.So i cant download new rom even from my sd it doesnt work for download new roms too.What can ı do please help?
can you somehow transfer files to your device?
hey dudes,
I finally managed to put a wm 6.5 rom with manila2D on my Qtek 9100.
Now a friend of mine also wants that stuff on his smartphone.
He has a HTC Polaris (Touch Cruise) which is running wm 6.1 dutch.
I told him it would be in english, but that;s no problem.
I managed to find a rom, but no matter what I do...I can't get in on his phone.
Could someone get me a step by step guide on howto do it?
I am gonna use this rom:
http://forum.xda-developers.com/showthread.php?t=554071
anyone wanna help
my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.
19rsn007 said:
my problem is I can't get the HARD-SPL thing on the device.
I all the guides it says it will tell you to unplug en replug the usb cable...bit mine doesn't.
It boots the bootloader, and after that a progressbar shows up and gets stuck @ 0% for a while and then error.
Click to expand...
Click to collapse
whether you try to use Hard SPL V2 .. ?
for the perfect flash HardSPL , you must remove the sim & sdcards then run SDA ApplicationUnlock installed on your PC only then you can run the ROM Update Utility.exe to flash the hard SPL
hey!!
The SDA Unlocker did it's job...didn't even know I needed this!
HardSDL V2 Worked GREAT!!
My co-worker is really gonna like this.
After downloading the HardSDL in the attachment it was installed in a few seconds.
After that, installing the rom was piece of cake...WORKED LIKE A CHARM!