Database Info

Error while loading ROM from CoreProKitchen... (not "HELP! I'M STUCK IN BOOTLOADER!")

Error while loading ROM from CoreProKitchen... (not "HELP! I'M STUCK IN BOOTLOADER!")
Okay, so I added my packages, etc and followed all the steps, everything worked up until the point where I flashed my phone. When it get's to 98% my computer pops up with the following error message:
-----------------------------------------
The instruction at "0x00405e9b" referenced memory at "0x0018a000". The memory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
-----------------------------------------
I'm back up and running, but I would really like to use my rom. Any idea how to clear up this error and get this baby flashed?

inneyeseakay said:
Okay, so I added my packages, etc and followed all the steps, everything worked up until the point where I flashed my phone. When it get's to 98% my computer pops up with the following error message:
-----------------------------------------
The instruction at "0x00405e9b" referenced memory at "0x0018a000". The memory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
-----------------------------------------
I'm back up and running, but I would really like to use my rom. Any idea how to clear up this error and get this baby flashed?
Click to expand...
Click to collapse
Mabe you put too many files in the ROM ... how big is the nk.nbf ?

The nk.nbf is 60,161KB... that's smaller than some of the other nk.nbf's I have seen.
Anything else it could be? Redid the whole process, flashing again...

For an OS only nbf the file should be around 57/58MB - sounds to me like you over filled the ROM.

On XP if you put your mouse over the nk.nbf and it shows its bigger than 57.3meg then you will not be able to flash it as its too big (thats for a rom with OS, and splash screens. If you don't have splash screens I think its like 57.1). The other way to check is right click and choose properties on the nk.nbf. Look at the size (not the on disk size).

Thanks... I guess I overstuffed it... I didn't think it had all that much in it... oh well.

inneyeseakay said:
Thanks... I guess I overstuffed it... I didn't think it had all that much in it... oh well.
Click to expand...
Click to collapse
Try to optimise some big executables. That will surely give you couple of spare MB

Up and running now!

Kaiser stuck at Windows Mobile logo screen

I've done the requisite searching so now my post.
I'd like to dump my phone's filesystem and get files from the dump.
I do not have access to the OS. Only the bootloader.
Specs on the phone are:
Model: HTC Kaiser 120 (Bootloader says 130?)
OS: Windows Mobile 6.1
Rom version: Unknown
HardSPL: YES; v3.29
I figure that I'll need:
MTTY
a list of commands that will allow me to dump various portions of the NAND
a list of addresses that correspond to various parts of the filesystem on (in?) NAND
a program to rebuild the filesystem from raw memdumps
I remember it being mentioned somewhere that this was theoretically possible.
Thanks for your help and support.
(sorry about wordiness)

Wow, that sounds so good. I just wish I knew how to help Hope you find something, I'll be looking back here to see if anybody has any ideas. It would be handy to know how to do this incase I ever need to do it.

LoveMyPhone said:
I've done the requisite searching so now my post.
I'd like to dump my phone's filesystem and get files from the dump.
I do not have access to the OS. Only the bootloader.
Specs on the phone are:
Model: HTC Kaiser 120 (Bootloader says 130?)
OS: Windows Mobile 6.1
Rom version: Unknown
HardSPL: YES; v3.29
I figure that I'll need:
MTTY
a list of commands that will allow me to dump various portions of the NAND
a list of addresses that correspond to various parts of the filesystem on (in?) NAND
a program to rebuild the filesystem from raw memdumps
I remember it being mentioned somewhere that this was theoretically possible.
Thanks for your help and support.
(sorry about wordiness)
Click to expand...
Click to collapse
why you don't go to the TRI-Color screen and flash the rom again.. flash one Official like 3.34.721.2 from HTC
to go to the TRI-Color screen must pust together the photo button + Power button and after 2sec the reset all this together
and then connect the usb and flash the 3.34.721.2 htc official rom

b16b said:
why you don't go to the TRI-Color screen and flash the rom again..
Click to expand...
Click to collapse
I guess I sacrificed a few too many details in favor of avoiding wordiness. I know I'm a bit crazy, but I'd like to try to recover my files. Re-flashing would hose my files for certain no? I'm fairly certain that everything is mostly intact because if the phone is given five to ten minutes, it will get to the today screen. However it will be lethargic and wont connect to Windows via ActiveSync (thus ruling out itsutils for file grabbing right?). Anyways...
Simply put, file recovery is the goal. I'm OCD and not knowing what I've lost is driving me nuts. (heh...)
Thank you, and again, help and support is greatly appreciated.
(bold included for people who like to skim instead of read everything)

Sorry for necroposting, but I have the same problem with my Elf and this is the only thread about this problem that I could find so far.
Have you, by any chance, found a solution (and still remember it )?
My details:
Windows plays the loading animation and then is stuck. After a few minutes I get a white screen with black text and some garbled pixels at the bottom which says that Windows was unable to boot (because I may have installed some malicious software, yadda Microsoft fud, yadda) and that I can press the Send key to hard-reset the device, erasing all my data in the process.
The power led is also not active, so eventually I'll have to charge my battery in someone else's device in order to use mine again.

Hmm, it seems I am subscribed to this thread, even though I haven't really used my WinMo phone (or this forum) in about a year. Unfortunately, I don't think I every found a real solution. If i recall, I ended up waiting for it to boot and then copied my files to the SD card. Unfortunately, it sounds like you don't have that option so your data is probably toast :/.

Any guide to run Andriod in POLA100??

Android on HTC cruise How to?
Hi all,
I'm REALLY confused or misinfomed or whatever on how to run andoid from my sd card.
I tried some things from a website androidonhtc but only got up to a point.
Is there a simple how-to on how to run android on cruise and some links on where to donwload the appropriate files?
For example i have got the haret but i can't find anywhere to download androidinstaller.tar
Am I close or far from my goal?
I know i might ask a silly question but guys i'm really confused.
Thanks anyway in advance.

as for how-to in hxxp://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall
after getting haretinstall.zip, you need a current kernel (zImage) from
- dzo = hxxp://it029000.massey.ac.nz/vogue/files/?C=M;O=D
or
- sourceforge = hxxp://sourceforge.net/projects/androidhtc/files/
------------------------
as for androidinstall.tar / .tgz you can get from
- vogue forum = hxxp://forum.xda-developers.com/forumdisplay.php?f=588
- kaiser forum = hxxp://forum.xda-developers.com/forumdisplay.php?f=602
- sourceforge = hxxp://sourceforge.net/projects/androidhtc/files/
PS: sorry for the hxxp link, I have no permission to post any link yet

Thank you very very very much for your help!

Congratulations mensa07. Although I already knew all this stuff from your link, it took me some time to figure them out because I did not know there was such a good guide for starters. Very usefull link. Thank you

Hi..
I reading many of threads..
But i still dunno how to make it works on my POLA100..
can any1 show me some guides??
tq..

yes please post a guide for dual booting ...i do not want to flash if not necesary ...
preeety plz

please check this thread for guide on running android on pola100

oh come on ..a couple of links with no explanation ...no nothing ...
its garbage !!! - we have to pick up pieces fom 10 or 12 threads to make this work?and the english is "lakky",,,
please post A GUIDE .... not o joke.

rocket1982 said:
oh come on ..a couple of links with no explanation ...no nothing ...
its garbage !!! - we have to pick up pieces fom 10 or 12 threads to make this work?and the english is "lakky",,,
please post A GUIDE .... not o joke.
Click to expand...
Click to collapse
well, it's no garbage, just required more explanation. let me try to make it simpler. this guide will use zImage-eclair and vaniljeclair, change it to suit your taste accordingly
- get haretinstall.zip from here
extract this file and get default-polaris.txt (rename as default.txt), zImage-eclair (rename as zImage), initrd.gz and haret.exe. put all these files into andboot folder in root of your sdcard. your sdcard will look like this:
/andboot/default.txt
/andboot/zImage
/andboot/initrd.gz
/andboot/haret.exe
- next you need to download vaniljeclair from here
extract the file and you will get androidinstall.tar, put this file along with those files on /andboot/
you should have those 5 files or you cannot boot android.
- select haret.exe to execute, press run, pay attention to the text rolling, when it asks you to hold button, hold volume button up, and you will be given installer menu. choose install and delete data. let the format and installer finish, then you will be given menu again. do not quit, just reset, and restart from haret (you will see that you have data.img, system.img and some other files). at this time let the installer do not interrupt, it took more than 5 minutes before android logo asks you to touch screen
- if there is problem during booting, post it here, let people here try to solve
HTH

i want to ask..izzit it will wide out my windows mobile system??

scotty89 said:
i want to ask..izzit it will wide out my windows mobile system??
Click to expand...
Click to collapse
no, if you start android from haret.exe, it will not erase anything.

even data in the sd card??

scotty89 said:
even data in the sd card??
Click to expand...
Click to collapse
it will not erase your sd card either, however you might want to backup your data first just in case something does not go well.

thx for ur help..
i get to boot in the android..
try to use it..
is the bluetooth and wireless fix>??
and can the contact to be sync??

scotty89 said:
thx for ur help..
i get to boot in the android..
try to use it..
is the bluetooth and wireless fix>??
and can the contact to be sync??
Click to expand...
Click to collapse
BT and WIFI should work, there is vaniljeclair thread on this problem if something is not working.
as for contact I think you need google account to sync.

Hi,
Thank you for the guide. I actually follow it and encountered an error. When it asked for volume up or d-pad center, I did, then it prompted that it was waiting for something several times. So I soft-reset the phone and launch it again.
Then, after haret.exe is booting linux, I have got a strange screen with scramble text.
How can I put everything back in the previous state to reinstall it propely?
Thank you

More info....
Did you get to the install screen after pressing centerdpad?
If yes, did it install?
What was it waiting for? The error message can give a clue what is wrong.

i manage to get to ask to hold up the center d-pad then get into a installer menu..
currently i just cant get my wifi and bt work..
haven get connection to sign in to google account..

I have all five file on my SD card but when I click on haret on my Sd and hit run where it say defaukt.txt..I get a error saying " cannot open script file \storage card\andboot\default.txt" is im doing something wrong..thx

u got change the polaris default-polaris to default??

Please help with ROM flashing [Asus P320]

I have an ASUS P320.
During flashing a Windows 6.5 ROM, it went bad and now I am not able to boot the phone or do anything.
I have tried 2-3 ROMs to re-flash by putting them in my SD card, but every time it says "Read SD busy !"
I also tried to re-flash it using original 4.10 ROM from official ASUS website but here is where I get stuck up:
BTLR 3.1
Init SD Control
IPL: Insert SD Card
Start SD Init
Get MBR success
start find images
can't find galaxymini-ond.raw !
find 850_GAX_SD.bin !
can't find FLASH.BIN !
can't find GSM.BIN !
can't find EXT_ROM.NB0 !
valid package percentage: 100
Read SD busy !
No GSMFFS
Total 3 images in package
FLASH.BIN in package !
GSM.BIN in package !
EXT_ROM.NB0 in package !
after all these msgs I waited for too long, but nothing happens. I repeated this many times, but it stucks after this and I am not able to write any new ROM anyhow on my phone.
I am really really in big trouble as this is my only phone and I am really depressed. Plz can anyone just help me with how to proceed to write a new or any old ROM on my phone? I will be really thankful

Seriously noone has any clue or willing to help?

you will have to split the original rom !!! using this tool
then keep all split files in the root of memory card !!
plz tell me if it works

abhijeetcool said:
you will have to split the original rom !!! using this tool
then keep all split files in the root of memory card !!
plz tell me if it works
Click to expand...
Click to collapse
Thanks so much for the reply.
But how to use this tool? I am confused?
I kept the 850_GAX_SD_Enc ROM in the same folder as this tool and then run Split P320 ROM.exe
But P320binDEC.exe shows application error. I am running this under Windows XP. Please help me.

Ok I installed .Net Framework 2.0 and everything worked and the files were extracted.
Then I had put all files in root of SD card.
It shows:
BTLR 3.1
Init SD Control
IPL: Insert SD Card
Start SD Init
Get MBR success
start find images
can't find galaxymini-ond.raw !
find 850_GAX_SD.bin !
find FLASH.BIN !
find GSM.BIN !
find EXT_ROM.NB0 !
valid package percentage: 99
Read SD busy !
No GSMFFS
Total 3 images in package
FLASH.BIN in package !
GSM.BIN in package !
EXT_ROM.NB0 in package !
and it stops again. Nothing happens :| What should I do?

abhijeetcool said:
you will have to split the original rom !!! using this tool
then keep all split files in the root of memory card !!
plz tell me if it works
Click to expand...
Click to collapse
thanks dear,
it is working fine.

what about Get MBR fail
Init SD download Fail! ???

abhijeetcool said:
you will have to split the original rom !!! using this tool
then keep all split files in the root of memory card !!
plz tell me if it works
Click to expand...
Click to collapse
thanks split the original rom & copied to root of memory card.
it installed everything then restarted & hangs with white screen
any solution please

i have used rom
P320_V4_15_0_V4_10_V1_11_0_WWE

abhijeetcool said:
you will have to split the original rom !!! using this tool
then keep all split files in the root of memory card !!
plz tell me if it works
Click to expand...
Click to collapse
Thanks a trillion. This tool injected life into my P320. It had been dead for the past 2-3 months. You are a savior.

sidramobilecare said:
thanks split the original rom & copied to root of memory card.
it installed everything then restarted & hangs with white screen
any solution please
Click to expand...
Click to collapse
I had the prob same as u.
What I did was installed 4.15 WWE than tried to upgrade to WM6.5 from 4.10ZHH WM6.1, and the errors came out.
I even had the paragraph saying
"This concludes the beta test of this
software release. Thank you very much for
your time and effort in helping make this a
great product for our customers.
To obtain a newer release or futher
information,please revisit the web site that
you used to obtain your current beta
release."--------then it got stuck and the only buttons that worked were the volume and reset buttons. And I thought its done that all I could do was to sell it.
But then I split the 850_GAX_SD_Enc.bin(which was from a different language 4.15 zip,referring above), the following came up:
850_gax_sd.bin
GSM.BIN
FLASH.BIN
EXT_ROM.NB0
and others, but I only copy these 4 into SD card cause they were the things that stated "can'"t find"' and I couldnt find galaxymini-ond and GSM.RAM.....and yes I did put 850_gax_sd.bin in instead of the capital one(accidentally!!!cus i thought they were the same, but apparently not...ANYWAY I DID!)
then i inserted the card, flash reset(volume down + reset) it,
it took quite a while to install(abt 10-15 mins)
like u said a pure white screen occurred and it frozen.
then I press the switch on button on top and restart the device...
the old version came up again with 4.15ZHH and WM 6.1 (green) and everything got back to default just like the very first day I bought it.
this is all i did, i think the different between us was that i used a different language of 4.15 and the 850_gax_sd.bin..... not very sure on yours but it worked on mine somehow... I'm not an expert on computer and programmes stuff, and i really cant tell if errors are still left in the device after what i did, so beware of this prob if you follow.

Rom size errors

After an extensive search of both this site and using google for the error, I am stuck at a crossroads in terms of trying to install the GPE DigitalHigh edition on my HTC One M8.
The issue is as follows:
Installed RUU of GPE 5.1 (this is the only RUU I have at present)
Did all the various system & cache wipes etc using TWRP
Did the filesize repair on System
Tried to install the above ROM using the installer and got the following error:
failed to mkdir /system/etc/firmware/wcd9320/wcd9320_mbhc.bin: No space left on device
And then the various symlink errors associated and an Installation Status 7 Failed
Now I get the issue, in that the /system folder is clearly not big enough, an issue with the GPE RUU from what I have read. However, the only advice I can find to rectify this is to use the RESIZE option in Advanced Wipe in TWRP. However, I have done this, I've even done it a few times in succession in case it is like the RUU process and doesn't necessarily work first time. However, another run of the installer and I get the exact same error. Looking at my system (in Wipe) after a failed install, I can even see that the system partition is full, but I don't know how else I can resize it to avoid this error.
As I said, trawled through almost 500+ posts trying to find answers, from where I gleaned the above information, but no other way to resize the system partition than the method I tried. Therefore, I would genuinely appreciate any help anyone could give in overcoming this error, by whatever method is best/works best.
I have full log file from my failed install and can also explain the steps I took / files I used in more detail too if necessary. At present, it's just a case of another RUU of the GPE 5.1 at the moment until I can find a solution Purely wanting to install so I have the M8 camera functionality back if anybody has any other tips for achieving this other than the above (again, searches etc have led me to the camera.apk, I've had it installed etc but the editor still goes to the FX editor, without any of the HTC sense camera functions (like Duo, U-Focus etc) that I am keen to get back.
Again, apologies if this is answered elsewhere, but it's not for the want of looking, and as a new user not allowed to post directly on the ROM post yet. I would appreciate any help.
Thanks,
Sie

siepod said:
After an extensive search of both this site and using google for the error, I am stuck at a crossroads in terms of trying to install the GPE DigitalHigh edition on my HTC One M8.
The issue is as follows:
Installed RUU of GPE 5.1 (this is the only RUU I have at present)
Did all the various system & cache wipes etc using TWRP
Did the filesize repair on System
Tried to install the above ROM using the installer and got the following error:
failed to mkdir /system/etc/firmware/wcd9320/wcd9320_mbhc.bin: No space left on device
And then the various symlink errors associated and an Installation Status 7 Failed
Now I get the issue, in that the /system folder is clearly not big enough, an issue with the GPE RUU from what I have read. However, the only advice I can find to rectify this is to use the RESIZE option in Advanced Wipe in TWRP. However, I have done this, I've even done it a few times in succession in case it is like the RUU process and doesn't necessarily work first time. However, another run of the installer and I get the exact same error. Looking at my system (in Wipe) after a failed install, I can even see that the system partition is full, but I don't know how else I can resize it to avoid this error.
As I said, trawled through almost 500+ posts trying to find answers, from where I gleaned the above information, but no other way to resize the system partition than the method I tried. Therefore, I would genuinely appreciate any help anyone could give in overcoming this error, by whatever method is best/works best.
I have full log file from my failed install and can also explain the steps I took / files I used in more detail too if necessary. At present, it's just a case of another RUU of the GPE 5.1 at the moment until I can find a solution Purely wanting to install so I have the M8 camera functionality back if anybody has any other tips for achieving this other than the above (again, searches etc have led me to the camera.apk, I've had it installed etc but the editor still goes to the FX editor, without any of the HTC sense camera functions (like Duo, U-Focus etc) that I am keen to get back.
Again, apologies if this is answered elsewhere, but it's not for the want of looking, and as a new user not allowed to post directly on the ROM post yet. I would appreciate any help.
Thanks,
Sie
Click to expand...
Click to collapse
You would have a better chance of finding a working solution if you go to the M8 forum.
I'll bet @xunholyx can get you straight, he's pretty experienced with the M8 I think.

siepod said:
After an extensive search of both this site and using google for the error, I am stuck at a crossroads in terms of trying to install the GPE DigitalHigh edition on my HTC One M8.
The issue is as follows:
Installed RUU of GPE 5.1 (this is the only RUU I have at present)
Did all the various system & cache wipes etc using TWRP
Did the filesize repair on System
Tried to install the above ROM using the installer and got the following error:
failed to mkdir /system/etc/firmware/wcd9320/wcd9320_mbhc.bin: No space left on device
And then the various symlink errors associated and an Installation Status 7 Failed
Now I get the issue, in that the /system folder is clearly not big enough, an issue with the GPE RUU from what I have read. However, the only advice I can find to rectify this is to use the RESIZE option in Advanced Wipe in TWRP. However, I have done this, I've even done it a few times in succession in case it is like the RUU process and doesn't necessarily work first time. However, another run of the installer and I get the exact same error. Looking at my system (in Wipe) after a failed install, I can even see that the system partition is full, but I don't know how else I can resize it to avoid this error.
As I said, trawled through almost 500+ posts trying to find answers, from where I gleaned the above information, but no other way to resize the system partition than the method I tried. Therefore, I would genuinely appreciate any help anyone could give in overcoming this error, by whatever method is best/works best.
I have full log file from my failed install and can also explain the steps I took / files I used in more detail too if necessary. At present, it's just a case of another RUU of the GPE 5.1 at the moment until I can find a solution Purely wanting to install so I have the M8 camera functionality back if anybody has any other tips for achieving this other than the above (again, searches etc have led me to the camera.apk, I've had it installed etc but the editor still goes to the FX editor, without any of the HTC sense camera functions (like Duo, U-Focus etc) that I am keen to get back.
Again, apologies if this is answered elsewhere, but it's not for the want of looking, and as a new user not allowed to post directly on the ROM post yet. I would appreciate any help.
Thanks,
Sie
Click to expand...
Click to collapse
You need to run a Sense RUU to resize your partitions. The GPE system partition is too small for Sense based ROMs and RUU is how you fix it. Just like you ran a GPE RUU to resize your partitions for that.
---------- Post added at 06:17 PM ---------- Previous post was at 06:11 PM ----------
If you don't know where to get the RUU, or if you need instructions, post/reply here and I'll give you complete directions on how to do it.

xunholyx said:
You need to run a Sense RUU to resize your partitions. The GPE system partition is too small for Sense based ROMs and RUU is how you fix it. Just like you ran a GPE RUU to resize your partitions for that.
---------- Post added at 06:17 PM ---------- Previous post was at 06:11 PM ----------
If you don't know where to get the RUU, or if you need instructions, post/reply here and I'll give you complete directions on how to do it.
Click to expand...
Click to collapse
Thanks for your reply. Really appreciate your help. I think I'm ok with the RUU process itself, as I ran it to get to this point, however I'm not sure where to locate the RUU I would need to effectively "roll back" to stock, so any help with that, and directing me in which of the plethora to choose would be greatly appreciated! Perhaps if you could give me simple instructions, so it's not too time consuming for you, but to ensure I'm not missing anything in the RUU process that could lead to further complications, that would be a big help too!

siepod said:
Thanks for your reply. Really appreciate your help. I think I'm ok with the RUU process itself, as I ran it to get to this point, however I'm not sure where to locate the RUU I would need to effectively "roll back" to stock, so any help with that, and directing me in which of the plethora to choose would be greatly appreciated! Perhaps if you could give me simple instructions, so it's not too time consuming for you, but to ensure I'm not missing anything in the RUU process that could lead to further complications, that would be a big help too!
Click to expand...
Click to collapse
Download this splash.zip, rename it to 0P6BIMG.zip and place it onto your extSD. Boot into bootloader and select hboot if it doesn't automatically. Vol up to flash, power to reboot. That'll repartition your phone, but with old firmware. Delete the renamed zip from extSD, otherwise every time you boot to hboot it'll try to update again.
Next, download this RUU onto your PC to update to Lollipop. Hook up your phone and double click on the download, then follow the prompts. You'll probably get a "fail hboot pre-update" (or something like that). The first run updates the hboot with old firmware. Just run the RUU a second time without disconnecting, and the conversion back to Sense will be complete.

xunholyx said:
, rename it to 0P6BIMG.zip and place it onto your extSD. Boot into bootloader and select hboot if it doesn't automatically. Vol up to flash, power to reboot. That'll repartition your phone, but with old firmware. Delete the renamed zip from extSD, otherwise every time you boot to hboot it'll try to update again.
Click to expand...
Click to collapse
You are an absolute star, thank you. Will give this a bash when I get home from football later today, and let you know how I get on or if I have any problems. Great written instructions though, thanks!

xunholyx said:
, rename it to 0P6BIMG.zip and place it onto your extSD. Boot into bootloader and select hboot if it doesn't automatically. Vol up to flash, power to reboot. That'll repartition your phone, but with old firmware. Delete the renamed zip from extSD, otherwise every time you boot to hboot it'll try to update again.
Click to expand...
Click to collapse
Just had a try, get Update Fail! in red text when I try to do the Hboot. Not sure why?
Thanks,
Sie

siepod said:
Just had a try, get Update Fail! in red text when I try to do the Hboot. Not sure why?
Thanks,
Sie
Click to expand...
Click to collapse
I'm not sure.
Try the splash.zip download and instructions from here. It should be the same file, but trying another download and flashing from your PC might work better for you.

xunholyx said:
I'm not sure.
Try the splash.zip download and instructions . It should be the same file, but trying another download and flashing from your PC might work better for you.
Click to expand...
Click to collapse
Brilliant, tried those and it worked a treat. Then installed using the RUU you gave me, and as promised I was greeted with a full back to stock Sense version, and have been able to install the ROM I wanted. Thanks once again for all your help, truly appreciated!
I'm guessing it was the CID that was causing the error, if anybody has the same problem in the future and ends up on this thread. I'm guessing if I'd have changed the CID your method with the HBOOT would probably have worked too (as out of curiosity I tried the HBOOT method with your file and it then worked).
Thanks again, great to know there are people out there willing to try and help each other. :highfive: