[Q] I think I bricked my Incredible? - General Topics

I flashed my droid with Unr3voked and proceeded to install Sapphire. With it, I had to get ROM Manager and Clockwork Recovery. I noticed somehow my 2 gigs of SD card memory was gone, and I tried to format the SD card. When I rebooted, it is stuck on the white Incredible boot screen. I can get it to recovery mode, but I got a bit... delete happy. My SD card got partitioned, and it also says my SD card can't be mounted with error E:Can't mount /dev/block/mmcb1k1p1 (or /dev/block/mmcb1k1). I want to 1) unpartition my SD card, (I know, there's a million forum posts about this, but I'm on a Mac and can't seem to figure it out) and 2) fix all this and get my phone working again. I don't really care what ROM it uses as long as it works again. Any help would be thoroughly appreciated.

no you did not brick your phone bcuz you can get to the recovery.

Related

[Q] Can't mount SD Card on Clockwork Recovery for Flashing (Rooted with unrevoked 3)

I have a HTC Desire,
Rooted my phone with Unrevoked 3.31, everything went fine.
As soon as I got into recovery menu, Clockwork, I cannot mount my SD Card.
When I go to - Install zip from SD Card, and I'm trying to read my sd card to load the ROM zip, it says that Its unable to mount it.
I've seen a couple of posts with information and tried to follow suggestions, but no luck.
Thank you.
Plus 1
Same here. +1....
+1 I'm having this same issue. Been looking for a resolution for 4 HOURS now...
+1 for me...
Same issue here, was there a resolution?
Had this issue with my friends card as well. we ended up pulling the card out and throwing it into a computer. then we reformated it as fat32 put it back in the phone. and it worked. we also went from Clockworkmod 3.0.0.5 back to 2.5.x.x Alot of ppl ive talked to are having issues with 3.0.0.5 and some roms/mod/kernals cant be flashed with it.
Also make sure the sd card is not locked i know that sounds like a stupid statement but it needs to be checked lol
i also ran into this problem,, all i did was format my sdcard.. and if u have another card laying around try using it... if formatting through computer does not work, try formatting it through your android phone
Any Luck on the SD card issue
I have the same issue.
no ROM installed so can't boot.
Can't mount SD in recovery (got clockwork mod 2.5.0.7)
tried formatting SD, no luck.
Any ideas??
Hey guys also couldnt mount sd card at all either. Took out my sim card and it works fine...... Telstra sim card. WTF?
westleydan said:
I have the same issue.
no ROM installed so can't boot.
Can't mount SD in recovery (got clockwork mod 2.5.0.7)
tried formatting SD, no luck.
Any ideas??
Click to expand...
Click to collapse
Anyone figure this out?? I had trouble flashing Kings Alliance ROM and I had to do a battery pull and then I wanted to get some dust out around my SD card so I unplugged it and not when I'm in recovery it can't mount. PLEASE HELP?!
+1 here. i formated in windows for fat32. after it i wanted to flash a new rom, but in recovery my phone tells me, that he canĀ“t mount my sdcard.

[Q] SD Card won't mount or format - Help?

So my phone got dropped in water this week and I immediately got it out, pulled the battery and sd card, and got it in a bag of rice. Took it out two days later and the phone is working fine now, though it said the sd card was damaged and wouldn't let me format or mount it. I put it in my computer and it worked fine, so I pulled all the data and saved it on my comp. Tried putting the blank sd in the phone and it says its blank or an unsupported format, and again it won't let me format or mount the card. I tried with a different micro sd card and it did the same thing. I'm running Humble 1.42 with the OC kernel without voodoo on. Any idea on how to get a card to mount and get my data back on it? Could I possibly just load Humble 1.5 on the sd, update the phone to 1.5 through CWM and then have it work? Any help would be greatly appreciated.
did you flash the SD fix?
I had that problem the other day. You have to flash the sd card fix or it won't be able to mount it. I ended up flashing the full GummyCharged 1.9.1 Odin which included the kernel, recovery, and rom and it's running great right now.
Sent from my SCH-I510 using XDA App
You will need to put the card into your computer to put the fix on it. Then back into the phone and flash with cwm recovery. Check my sig for the link to the fix.
If your cwm doesn't see the sd card then you may have an issue with hardware.
I put the sd card fix and humble 1.5 on my sd card, but when trying to choose a zip from the sd card in CWM it says "E: Can't mount /sdcard". And if I try mounting through CWM, it says "Error mounting /sdcard!". Any other suggestions? Should I just reflash my rom/kernel/cwm through ODIN?

[q] oh no help!!!

I messed up bad!!
i wanted to set path for internal sd card as external and switched the two mount points in vold.fstab i do not remember exact script last paragraph was using eagleblood v.08. when media scanner finished it said sd card damaged reformat so i did. Stupid Stupid!!! currently i do not have an actual sd card. i am running clockwork recovery v5.0.1.6S from there cant mount I cannot MOunt ****!!
no internal no cache nothing i wiped everything u can have fixed permissions the only thing i havent done is partition sd card. and im afraid if i do that i will take this royal **** up and Cristen it. i can get software all on computer but then again i do not have sd card and even if i did how could i posible load files onto it?
can i reinstall clockwork via nv flash and also flash rom through nv
**** AGHHH Thank you in advance for any ideas
also
I was also wondering if i got my hands on a sd card with a rom on it would it be able to mount as i screwed with that file Am i totally screwed
DAMIT DAMIT DAMIT
I would suggest flashing Clockwork with NVFlash and then trying to flash a rom through recovery.
tried that
nothing will mount in recovery.
not the cache not the internal
i havent got a sd card so never tried that but being that i switched script on file im doubting even if it would work
jbdaka6445 said:
nothing will mount in recovery.
not the cache not the internal
i havent got a sd card so never tried that but being that i switched script on file im doubting even if it would work
Click to expand...
Click to collapse
Recovery doesn't read any scripts you changed in the OS. In recovery the memory and sd will be as they are designated in the hardware. You should be able to flash from an sd card even if your internal memory is hosed. If not do the new NVFLash full GB recovery method to return your phone to GB stock. That will fix your partitions.
I second what jboxer said to do I would just reture to stock GB. Make sure that you NVflash CWM to the external SD card not the internal. Dont worry man this phone is almost unbrickable well at least permanently anyway. You will be fine. Good luck man

Stuck on Asus logo screen!

Help! I flashed the revolver 4 rom but now my tablet won't boot up! Ran the superwipe script followed by the rom flash and then 1.3.1 over that. The tablet just stays at the asus logo. What can i do??
You can enter apx mode and flash HC via nvflash.
I've done this twice in the last few days
I'm stuck in that boat as well. I cannot enter APX mode. HAs anyone else had this issue?
Frustrated.
Thanks
If you can still go into recovery...repeat the process except let the tablet boot without doing the. 1 update. If the Asus logo is animated...its still loading. It may take a couple minutes.
when I try to mount SD card in recovery,
I get
E: can't mount SD
IT will not recognize the external SD either.
Any ideas?
honkinn said:
when I try to mount SD card in recovery,
I get
E: can't mount SD
IT will not recognize the external SD either.
Any ideas?
Click to expand...
Click to collapse
Why are you trying to mount the SD card? You shouldn't need to do that if you are just flashing roms. If you are trying to access the external SD...you need the rogue version of cwm recovery.
That message came up when I wanted to install zip from sd card. When I toggle to the sd file, I get that message. E; can't mount SD card.
IT confused me too.

[Q] Trying to flash ICS to HD2 HELP!!!

Hi all. I'm flashing from Froyo to ICS, using NexusHD2-ICS-4.0.4-CM9-HWA V2.1. I've flashed new radio, MAGLDR etc... with no issues, but when I've come to actually flash the ROM, my SD Card has chosen this second to give up on me. It wouldn't transfer any files etc... using the MAGLDR USB mass storage mode, and now refuses to format it.
So, I assume the SD card is screwed (unless there's some weird setting I've missed?) - basically, my phone obviously won't boot into anything now, it's half past midnight and I don't have any more SD cards on me.
How can I flash this ROM using a bootloader? Is that possible? I vaguely recall using a Bootloader to flash to Froyo from WinMo, rather than an SD card.
Any ideas? I need to get this running very soon, so my phone will work.
Cheers in advance.
(also, I did a search, but I couldn't find an answer. Sorry if it has been answered already).
Alternatively, does anyone know of a NAND ROM with a daf.exe loader? Any will do, just so I can get my phone functional until I get a new SD card.
Thanks.
Fixed it, by going into clockworkmod, partitioning the card, formatting it within CWM, mounting the SD card, then mounting USB storage. Seeeeeems to have worked.
So, feel free to delete. That said, would still be interested in finding an alt. solution to this.

Categories

Resources