Related
I have been successfully using below procedure for couple of month to get Samsung Galaxy S 4G Clockword recovery fully working.
I followed below steps and I got Samsung Galaxy S 4G clockword recovery's Backup, restore and ROM.zip flashing fully working.
1. Install VKB5 Rom on phone using odin (Download mode on phone) from below link:
http://forum.xda-developers.com/showthread.php?t=978836
2. Download "3e_recovery_installer.zip" from here:
http://forum.xda-developers.com/showthread.php?t=833423
run the 3e Recovery Installer. When finished, close.
3. Flash ClockWorkMod Recovery via ROM Manager from market by selecting "Vibrant" when asked for phone type. Then reboot into recovery.
(You may need to reboot your phone if you get stuck on the ROM Manager "Reboot to Recovery" screen) (Just reboot, then attempt to reboot into recovery again)
At the green recovery select "reinstall packages". The first time will fail, run it once more, and you should now have the green CWM Recovery menu.
4. use Rom Manager to flash SGS4_data_mount_VKB5.zip from below link:
http://www.megaupload.com/?d=4R3GI9O0
5- Now you should be able to backup, restore and flash Rom.zip files created with Deodexer using clockword recovery Rom Mananger.
Enjoy
6. Videos showing SGS4 Clockword fully working
SGS4_clockword_Backup_restore video
http://www.youtube.com/watch?v=4A-QysQFyrQ
SGS4 Full Clockwork Backup video
http://www.youtube.com/watch?v=hM8KPpkwj-s
SGS4 Clockword Rom.zip flashing video
http://www.youtube.com/watch?v=sOehlwk_T94
Known Issues:
1- data folder 3rd party aplications i.e. none Google included in Rom.zip will not be flashed with rom.zip to the phone but can be installed later.
Note that data 3rd part aplication can though be backed up and restored with Clockword_recovery.
This is not the optimal solution for SGS 4G Clockword Recovery Mod. I have been waiting so long like all others on this forum for the offical ROM Manager Clockword Recovery Mod for SGS 4G. So I started loosing hope, therfore I tried to use others on this forum experiences to come up with a working Clockword Recovery Mod for SGS 4G. again this is working fine for me with a minor issue I already mentioned above in issues. If I find a better working Clockword Recovery Mod for SGS 4G I will switch to it as soon as possible. This one is satifying my needs for Backup, Restore; and flashing ROM.zip and zip files for now.
THIS IS A BETA TEST, I'M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE SINCE THIS USES ANOTHER CWM METHOD FROM THE SAMSUNG VIBRANT
What rom is this again?
Sent from my SGH-T959V using XDA Premium App
arahma said:
2. Download "3e_recovery_installer.zip" from here:
Click to expand...
Click to collapse
What is the 3e_recovery_installer For?
*Sammydr10*
why go through all this when the other thread only requires root and modification of system/bin/recovery and then reinstall packages in stock recovery
hackulous said:
why go through all this when the other thread only requires root and modification of system/bin/recovery and then reinstall packages in stock recovery
Click to expand...
Click to collapse
good question.... this has really been interesting, I've been working on both the T959 (TMO Vibrant) and then this one T959V (4g) to see the differences and I must say there have been more threads, comments, you name it but each have a problem or a lot of them. Of course I have been using the instructions & files accordingly and not using the same for the two phones, however there has been a lot I have used on the 4G that I used on the Vibrant.
All of the instructions seems to vary a bit as well (all using Odin). This one seems to make sense. I have been trying them all and changing things here and there as I go. I've been logging what . Did you revert to stock using Odin and if so which thread and how did it go? I'm curious. I'll post what happens with this.
hackulous said:
why go through all this when the other thread only requires root and modification of system/bin/recovery and then reinstall packages in stock recovery
Click to expand...
Click to collapse
Not to flame... But this route is redonkulous. I have to agree that the other route being taken by krylon and honk is the way to go...
Sent from my SGH-T959V using XDA Premium App
arahma said:
I have been successfully using below procedure for couple of month to get Samsung Galaxy S 4G Clockword recovery fully working.
I followed below steps and I got Samsung Galaxy S 4G clockword recovery's Backup, restore and ROM.zip flashing fully working.
1. Install VKB5 Rom on phone using odin (Download mode on phone) from below link:
http://forum.xda-developers.com/showthread.php?t=978836
2. Download "3e_recovery_installer.zip" from here:
http://forum.xda-developers.com/showthread.php?t=833423
run the 3e Recovery Installer. When finished, close.
3. Flash ClockWorkMod Recovery via ROM Manager from market by selecting "Vibrant" when asked for phone type. Then reboot into recovery.
(You may need to reboot your phone if you get stuck on the ROM Manager "Reboot to Recovery" screen) (Just reboot, then attempt to reboot into recovery again)
At the green recovery select "reinstall packages". The first time will fail, run it once more, and you should now have the green CWM Recovery menu.
4. use Rom Manager to flash SGS4_data_mount_VKB5.zip from below link:
http://www.megaupload.com/?d=4R3GI9O0
5- Now you should be able to backup, restore and flash Rom.zip files created with Deodexer using clockword recovery Rom Mananger.
Enjoy
6. Videos showing SGS4 Clockword fully working
SGS4_clockword_Backup_restore video
http://www.youtube.com/watch?v=4A-QysQFyrQ
SGS4 Full Clockwork Backup video
http://www.youtube.com/watch?v=hM8KPpkwj-s
SGS4 Clockword Rom.zip flashing video
http://www.youtube.com/watch?v=sOehlwk_T94
Known Issues:
1- data folder 3rd party aplications i.e. none Google included in Rom.zip will not be flashed with rom.zip to the phone but can be installed later.
Note that data 3rd part aplication can though be backed up and restored with Clockword_recovery.
Click to expand...
Click to collapse
Everyone should seriously wait until there is an official release for the SGS4G.
Telling people to use the Vibrant CWM version is not acceptable. This will add into the mix problems for people. Issues that will make it even harder for people to help diagnose when people post they are having issues.
Congrats on getting it to "work" on your phone. Thanks for sharing your experience, but everyone should be warned:
This method is not the right way to get CWM working on your phone.
Wait till CWM built by Dr Honk and Krylon360 is done and submitted to be included in ROM Manager. You'll save yourself alot of trouble and headaches.
arahma said:
I have been successfully using below procedure for couple of month to get Samsung Galaxy S 4G Clockword recovery fully working.
I followed below steps and I got Samsung Galaxy S 4G clockword recovery's Backup, restore and ROM.zip flashing fully working.
1. Install VKB5 Rom on phone using odin (Download mode on phone) from below link:
http://forum.xda-developers.com/showthread.php?t=978836
2. Download "3e_recovery_installer.zip" from here:
http://forum.xda-developers.com/showthread.php?t=833423
run the 3e Recovery Installer. When finished, close.
3. Flash ClockWorkMod Recovery via ROM Manager from market by selecting "Vibrant" when asked for phone type. Then reboot into recovery.
(You may need to reboot your phone if you get stuck on the ROM Manager "Reboot to Recovery" screen) (Just reboot, then attempt to reboot into recovery again)
At the green recovery select "reinstall packages". The first time will fail, run it once more, and you should now have the green CWM Recovery menu.
4. use Rom Manager to flash SGS4_data_mount_VKB5.zip from below link:
http://www.megaupload.com/?d=4R3GI9O0
5- Now you should be able to backup, restore and flash Rom.zip files created with Deodexer using clockword recovery Rom Mananger.
Enjoy
6. Videos showing SGS4 Clockword fully working
SGS4_clockword_Backup_restore video
http://www.youtube.com/watch?v=4A-QysQFyrQ
SGS4 Full Clockwork Backup video
http://www.youtube.com/watch?v=hM8KPpkwj-s
SGS4 Clockword Rom.zip flashing video
http://www.youtube.com/watch?v=sOehlwk_T94
Known Issues:
1- data folder 3rd party aplications i.e. none Google included in Rom.zip will not be flashed with rom.zip to the phone but can be installed later.
Note that data 3rd part aplication can though be backed up and restored with Clockword_recovery.
Click to expand...
Click to collapse
Additionally, why are you instructing people to install KB5. Also why is this listed as CWM3 when it's still using AMEND for the scripting and not Edify? What is the actual version number of CWM, I'm guessing it's not CWM3.
Thanks for posting all the questions, I didn't see the Vibrant part, I personally wouldn't rely on it being 100% safe unless it's been running a while. Truth is I "think" I used Vibrant Desktop Toolbox on the SGS 4G & continued working on it for a while as if it was the Vibrant until I could barely see (4am). But did notice the FFC and went oh s......! I thought I had made so much progress from recovering it from partitioning the SD card through Rom Manager (wiped the internal SD), live and learn.
Now SGS shows an internal SD Card where the Vibrant shows only SD Card in recovery. So since then have been making small changes and comparing. Still in recovery and am yet to find a thread with all the Odin info that you need to know (like changing ports, which worked for me). So until I come across a method made for that device that gets me back to stock I'll continue playing and see what comes out of it. After the Vibrant wouldn't boot I decided to keep the SGS in hopes to be able to learn off of the themes and info I use from the Vibrant thread to modify for the SGS and soon the SGS's Forum would be as busy as the Vibrant's is. I had done a couple things before this but nothing risky, just learning, it was careless mistakes that landed me here.
I'm sure you agree that the most simplified way to flash CWM is with Rom Manager but since that's not an option at the moment we have to wait or try an alternative & what's development without getting creative?..?.
If anyone knows knows of a thread with working links & clear instructions to odin back to stock please let me know. SO many methods just minor changes which some have made a difference. I ended up piecing my own update zip and it went further than any other. I pieced together a rom from a reliable Vibrant developer and pieced it as needed with a couple others. Got past the way more than I thought I would have only encouraging me to do more until I realized I need to stop and get a phone working....so I got a new phone so I could be reached..
If I totally understand what you did then maybe I'll try your method & will give you an update. But if something went wrong I would rather know it was me to blame for using files used for Vibrant on SGS. Everything out says don't use sw made for Vibrant on SGS, If you know why this is okay or what to do to make the sw compatible that would be great for SGS! It was fun playing at this level but I want Trigger and everything else back on the Vibrant and learn to make the SGS custom as well. Enough with recovery and downloading, those views are going to be embedded in my screens.
DjIsD said:
Thanks for posting all the questions, I didn't see the Vibrant part, I personally wouldn't rely on it being 100% safe unless it's been running a while. Truth is I "think" I used Vibrant Desktop Toolbox on the SGS 4G & continued working on it for a while as if it was the Vibrant until I could barely see (4am). But did notice the FFC and went oh s......! I thought I had made so much progress from recovering it from partitioning the SD card through Rom Manager (wiped the internal SD), live and learn.
Now SGS shows an internal SD Card where the Vibrant shows only SD Card in recovery. So since then have been making small changes and comparing. Still in recovery and am yet to find a thread with all the Odin info that you need to know (like changing ports, which worked for me). So until I come across a method made for that device that gets me back to stock I'll continue playing and see what comes out of it. After the Vibrant wouldn't boot I decided to keep the SGS in hopes to be able to learn off of the themes and info I use from the Vibrant thread to modify for the SGS and soon the SGS's Forum would be as busy as the Vibrant's is. I had done a couple things before this but nothing risky, just learning, it was careless mistakes that landed me here.
I'm sure you agree that the most simplified way to flash CWM is with Rom Manager but since that's not an option at the moment we have to wait or try an alternative & what's development without getting creative?..?.
If anyone knows knows of a thread with working links & clear instructions to odin back to stock please let me know. SO many methods just minor changes which some have made a difference. I ended up piecing my own update zip and it went further than any other. I pieced together a rom from a reliable Vibrant developer and pieced it as needed with a couple others. Got past the way more than I thought I would have only encouraging me to do more until I realized I need to stop and get a phone working....so I got a new phone so I could be reached..
If I totally understand what you did then maybe I'll try your method & will give you an update. But if something went wrong I would rather know it was me to blame for using files used for Vibrant on SGS. Everything out says don't use sw made for Vibrant on SGS, If you know why this is okay or what to do to make the sw compatible that would be great for SGS! It was fun playing at this level but I want Trigger and everything else back on the Vibrant and learn to make the SGS custom as well. Enough with recovery and downloading, those views are going to be embedded in my screens.
Click to expand...
Click to collapse
Well this guy has been posting alot of stuff that is not stable. Including this.
Here is what is stable:
Follow the instructions to put the latest CWM Beta 3 on your phone:
http://forum.xda-developers.com/showpost.php?p=13181141&postcount=1
Then all you have to do is boot into CWM and flash this ZIP. It's pretty simple, which is why what this guy is trying to get you to do is messed up.
http://forum.xda-developers.com/showthread.php?t=1074939
Additionally, there are numerous posts out there about how to use ODIN. Flash any one of the DEODEXED or STOCK TARS that are on the SGS4G forum. No need for using a PIT. It's again, pretty straight forward, just read anything BUT what this OP is trying to provide. DON'T FLASH STUFF for the ORIG VIBRANT onto SGS4G.
Joedeveloper is correct, the two phones are totally different. Partitions are way different, sgs4g are actually closer to epic than vibrant 3g.
Sent from my SGH-T959 using XDA App
I will leave this open, just posted a note in the OP first post as a warning.
Thanks,
joedeveloper said:
Everyone should seriously wait until there is an official release for the SGS4G.
Telling people to use the Vibrant CWM version is not acceptable. This will add into the mix problems for people. Issues that will make it even harder for people to help diagnose when people post they are having issues.
Congrats on getting it to "work" on your phone. Thanks for sharing your experience, but everyone should be warned:
This method is not the right way to get CWM working on your phone.
Wait till CWM built by Dr Honk and Krylon360 is done and submitted to be included in ROM Manager. You'll save yourself alot of trouble and headaches.
Click to expand...
Click to collapse
When I saw the “Download "3e_recovery_installer.zip" from here:” I was skeptical.I had visions of when I used that method back in March and nearly bricked my phone. I was able to recover from that fortunately. I chose the Wait and see philosophy on this solution.
This is not the optimal solution for SGS 4G Clockword Recovery Mod. I have been waiting so long like all others on this forum for the offical ROM Manager Clockword Recovery Mod for SGS 4G. So I started loosing hope, therfore I tried to use others on thsi forum experiences to come up with a working Clockword Recovery Mod for SGS 4G. again this is working fine for me with a minor issue I already mentioned in the initial posting. If I find a better working Clockword Recovery Mod for SGS 4G I will switch to it as soon as possible. This one is satifying my needs for Backup, Restore and flashing ROM.zip for now.
The recovery from.clockwork vibrant I's working...seems the easiest way to get recovery so far..no computer necessary
Sent from my SGH-T959V using XDA Premium App
Canter seem to get the link for the data mount..can you upload and repost link
Sent from my SGH-T959V using XDA Premium App
What rom is vkb5
Sent from my SGH-T959V using XDA Premium App
Close this thread... Bricks, anyone?
Sent from my SGH-T959V using XDA Premium App
I think the user should change the title of the thread. This isn't really a simplified procedure and uses the old using AMEND for the scripting and not Edify like the newer CWM.
People won't be able to flash the Theme's that people have been posting in the Theme and App section and they won't be able to flash future ROM's and ports.
Okay. Ignore the title, I couldn't think of anything to put. In short, I want to know about roms, about clockworkmod, cyanogen mod, and stuff like that. What they do, how to put them on, and I pretty much wanna know about the general stuff you do past rooting your phone. And I know that the section says No Noobs, but technically, I'm a newb, as far as I know i'm not annoying anyone or being completely nooblike.
Mainly with cyanogen. I read the instructions, and they seem too, I dont know, simplistic. I'd prefer exact details. Like, after I have clockwork mod installed, and I flash cyanogen, can i restore all the stuff I had on it? And once cyanogen is on there, is it already rooted, or must i root again? And if someone would explain to me how clockworkmod works in the first place. And how would I flash cyanogen? I thought it'd be through clockworkmod, but if I wipe everything and factory reset, wouldn't clockworkmod be gone?
My phone is a Samsung Galaxy S (Vibrant or not vibrant, I dont even know) It's a GT-i9000M. Running android 2.2.1, Rooted, I have clockworkmod installed, but still no idea what to do past that point. Also, my Kies isn't telling me about any 3.x upgrade, so how would i go about manually installing a new version of android? I know it has to do with Odin, but whenever i tried i ended up not doing anything.
And one last thing about MetaMorph. Where could i find themes for it? And do i need to have a certain Rom running in order to use metamorph themes?
I'm mainly used to iPhones and such, where there isnt really much to do besides jailbreaking and such, and moving on to android phones is pretty intense. XD So much more to do with Android phones.
Well uh, thats about all i can think of at the moment. Also please post anything you feel that a (somewhat) newb to android modding should know.
Sorry for all the questions, and to those that help me, I love you. <3
And if any moderators deem this thread as against the 'No Noobs' rule, at least send me a message telling me you deleted it, or else I'll end up looking endlessly through the forums for my thread. I've done that before, not fun. LOL (Couldn't find a 'My Threads' thingy on the forum i was using.
Gutana said:
Okay. Ignore the title, I couldn't think of anything to put. In short, I want to know about roms, about clockworkmod, cyanogen mod, and stuff like that. What they do, how to put them on, and I pretty much wanna know about the general stuff you do past rooting your phone. And I know that the section says No Noobs, but technically, I'm a newb, as far as I know i'm not annoying anyone or being completely nooblike.
Mainly with cyanogen. I read the instructions, and they seem too, I dont know, simplistic. I'd prefer exact details. Like, after I have clockwork mod installed, and I flash cyanogen, can i restore all the stuff I had on it? And once cyanogen is on there, is it already rooted, or must i root again? And if someone would explain to me how clockworkmod works in the first place. And how would I flash cyanogen? I thought it'd be through clockworkmod, but if I wipe everything and factory reset, wouldn't clockworkmod be gone?
My phone is a Samsung Galaxy S (Vibrant or not vibrant, I dont even know) It's a GT-i9000M. Running android 2.2.1, Rooted, I have clockworkmod installed, but still no idea what to do past that point. Also, my Kies isn't telling me about any 3.x upgrade, so how would i go about manually installing a new version of android? I know it has to do with Odin, but whenever i tried i ended up not doing anything.
And one last thing about MetaMorph. Where could i find themes for it? And do i need to have a certain Rom running in order to use metamorph themes?
I'm mainly used to iPhones and such, where there isnt really much to do besides jailbreaking and such, and moving on to android phones is pretty intense. XD So much more to do with Android phones.
Well uh, thats about all i can think of at the moment. Also please post anything you feel that a (somewhat) newb to android modding should know.
Sorry for all the questions, and to those that help me, I love you. <3
And if any moderators deem this thread as against the 'No Noobs' rule, at least send me a message telling me you deleted it, or else I'll end up looking endlessly through the forums for my thread. I've done that before, not fun. LOL (Couldn't find a 'My Threads' thingy on the forum i was using.
Click to expand...
Click to collapse
Well, I guess to first start off, here's a few pointers:
1. don't put the title in 1337 (people will most likely not click on it, thus no help)
2. you're right about this being the wrong thread. You should post this under the Samsung Galaxy S section (google your model number and you'll see it instantly) and should probably try the Q&A moreso than a general area (but it doesn't really matter all too much)
3. no matter how nooblike you may or may not be, you're still a noob XD
Now that we've gotten past the anally parts and all (hate doing that, but gotta =P), let's talk about what you came here for: answers.
Let's start with some definitions:
ROMs - these are the (usually modded) softwares that you flash to your phone. Depending on which phone you have, you can only flash ROMs made for your phone. Of course, if you have root/custom recovery, you can also install custom ROMs.
ClockWorkMod (CWM) is a recovery system made in order to allow people more features while they're in recovery mode. Of course, this is one of a few out there, but people stick to CWM cause of its huge support plus it's popularity. When you think of CWM, think of custom features being installed in (almost) one step (modding files and such will be taken care of for you, so you don't have to do it yourself). You can usually also fix a bricked system this way by reflashing either the entire ROM or the boot.img/other files (we'll get to this in a second)
CyanogenMod (CM) is an example of a very popular custom rom. They have a great team and usually is available for most devices, which in turn makes them so popular. It is widely supported and has a lot of extra features like updating to the latest OS and features not previously available on your phone. It's skinned, but usually follows the stock Android look for the OS in which they've skinned.
lol The reason why the instructions look so simple is because they've taken out all the hard work and all the stuff where you can possibly screw up your phone, so that they don't get a million messages saying "OMG MY PHONE BRICKED WHAT HAPPENED" and stuff like that. Protects them, makes it easier for you. If you had made a backup before you flashed CM (usually you only have to back up whats on the phone if it has internal and external memory, but back up your sd card always just in case. never hurt to), then yes. If you backed it up with your previous ROM, then you'll probably need to revert to get it back. If you didn't, chances are whatever you didn't backup and didn't sync, is safe to say gone. You can try recovering it using a recovery software on the computer like i detailed here for another person, but of course you'd skip the whole trying to save the phone part and just start with mounting the phone to your computer and running the software.
CM is a custom rom, and so most (if not all) custom roms have root preinstalled (besides, who wouldn't want root?!) As for CWM, it works by being (usually) flashed into the recovery partition of your phone. The nice thing about the phone is that it's split up into parts: boot, recovery, system, and some other ones i can't think of off the top of my head. Those three are important, as if you get a softbrick, you might still be able to recover all your data simply by using CWM/fastboot (a dev-tool used to flash/unlock, but only available in certain phones, as it is disabled usually) to reflash the boot.img (one requires command line, whereas CWM only needs you to flash a created/pre-made package). Also, since they're in separate partitions, even if your system and boot.img doesn't work, you can probably still access recovery (unless you screwed up really REALLY bad, and in that case I can't help >.<)
Observant you are =] Yes, if you were to flash CM, your CWM will be gone (i don't understand why most people don't just bake it into the ROM in the first place) but, not all is lost. Just go back into the Android Market and redownload ROM Manager. Of course you'll need to open it up and flash the same exact recovery again (annoying, isn't it?) but unless you know how to mod zip/img files and edit the script, you'll just have to make do with that. If you do, you could just (usually) take out the recovery partition and just leave the one you have already in there (but its usually safer and better to just redownload/reflash it as annoying as it is). But yes, you would use CWM to flash it. It's as simple as "Install from SD Card" which is why custom recoveries like CWM are popular. So simple
At this point, I would look into a few things. One is skinning your phone (though you probably can't do too much if you don't want to touch system files). If you find a psuedo-rom (slightly modded) that themes it, that's your best bet. Another is gaining access to certain features in apps you didn't have before (i.e. androidLost, LBE Privacy Guard, titanium backup) and of course more control by the ability to control your system files (if you know what you're doing, of course). Lastly, you can use stuff like MetaMorph to theme out certain sections of your rom (provided that they give you one compatible with your phone model/rom), minus having to flash it and having more fine-tuned controlled. Usually, Metamorph will run on all ROMs, but it doesn't guarantee that there'll be stuff for every ROM. Also, want themes? google it (google is your best friend!)
Kies won't tell you that you have an upgrade because it is ROM-dependent. It looks for their official ROM and says "Hey, this guy has our ROM. Check for an update". Think of owning a custom rom like being kicked out of your family. You won't get anymore updates from them XD. However, if you're looking to get the latest updates, check out the Samsung Galaxy S Dev threads. They will usually have another method of loading in the new ROM into your phone. And if you want to stick with ROM Manager, shell out for premium and they'll include "Check for Updates" in ROM Manager, along with several other functions (though you can check for free via computer/browser ). Mostly, manually updating the software requires the "Install from SD Card" feature in CWM/other recoveries, so you don't have much to worry about.
Odin is, as you stated, most likely your best bet. Not too many people repackage official ROMs into easy-to-flash zips. Odin is the Samsung equivalent to Motorola's RSD Lite from what I googled (i have motorola, so no exp. on odin >.<) It's mostly like a dev tool allowing you to flash/re-flash phones and is also usually your one-way ticket out of a semi/full brick (assuming you didn't mess up the hardware and you can get into download mode). It's the flashing tool that can access the core system of the phone even without root and allows you to reflash OFFICIAL ROMs. Should you use Odin (should be your last resort), you WILL lose root and all your data. No questions asked. Its like reinstalling everything to the state in which you got it in when you bought the phone. Word of advice: BACK UP OFTEN! (did i forget to mention Titanium Backup? )
Yeah, the transition from Apple to Android is so different and had I not had experience with my PSP, i'd be dying with the information overload. However, just read a lot of stuff on the forums (*cough*general android forums*cough*) and you should be just fine. We have an excellent community here that will try our best to fix whatever problems you encounter (note the key word: try. we're not gods XD) You'll get the hang of it soon enough.
Oh, well, I don't want to keep you for much longer, but since you mentioned something that any noob should know, it's definitely ADB (Android Debugging Bridge). This is where you'll probably spend a lot of time, as people's fixes usually involve shell (terminal for your phone). If anything, get acquainted with it, as it might save your butt in the future/unlock a few extra features for you ;D .
Well, that's all i can think of, and honestly, after typing this thing up for about an hour now, I think I'm going to grab me some breakfast Good luck to you and welcome to the Android commmunity! (and next time, remember to post in the right place! XD)
~jojojohnson7410
P.S. PM me if you need anything. =]
Observant you are =] Yes, if you were to flash CM, your CWM will be gone (i don't understand why most people don't just bake it into the ROM in the first place) but, not all is lost. Just go back into the Android Market and redownload ROM Manager. Of course you'll need to open it up and flash the same exact recovery again (annoying, isn't it?) but unless you know how to mod zip/img files and edit the script, you'll just have to make do with that. If you do, you could just (usually) take out the recovery partition and just leave the one you have already in there (but its usually safer and better to just redownload/reflash it as annoying as it is). But yes, you would use CWM to flash it. It's as simple as "Install from SD Card" which is why custom recoveries like CWM are popular. So simple
Click to expand...
Click to collapse
Just to nit-pick a bit. CWM is part of the recovery partition, and unless the Galaxy S is different from every other android device, flashing will not remove it. ROM Manager and CWM are two different things. ROM manager will allow you to download the roms, which will then instruct CWM to flash the rom (when it reboots).
jojojohnson7410 said:
Well, I guess to first start off, here's a few pointers:
1. don't put the title in 1337 (people will most likely not click on it, thus no help)
2. you're right about this being the wrong thread. You should post this under the Samsung Galaxy S section (google your model number and you'll see it instantly) and should probably try the Q&A moreso than a general area (but it doesn't really matter all too much)
3. no matter how nooblike you may or may not be, you're still a noob XD
Now that we've gotten past the anally parts and all (hate doing that, but gotta =P), let's talk about what you came here for: answers.
Let's start with some definitions:
ROMs - these are the (usually modded) softwares that you flash to your phone. Depending on which phone you have, you can only flash ROMs made for your phone. Of course, if you have root/custom recovery, you can also install custom ROMs.
ClockWorkMod (CWM) is a recovery system made in order to allow people more features while they're in recovery mode. Of course, this is one of a few out there, but people stick to CWM cause of its huge support plus it's popularity. When you think of CWM, think of custom features being installed in (almost) one step (modding files and such will be taken care of for you, so you don't have to do it yourself). You can usually also fix a bricked system this way by reflashing either the entire ROM or the boot.img/other files (we'll get to this in a second)
CyanogenMod (CM) is an example of a very popular custom rom. They have a great team and usually is available for most devices, which in turn makes them so popular. It is widely supported and has a lot of extra features like updating to the latest OS and features not previously available on your phone. It's skinned, but usually follows the stock Android look for the OS in which they've skinned.
lol The reason why the instructions look so simple is because they've taken out all the hard work and all the stuff where you can possibly screw up your phone, so that they don't get a million messages saying "OMG MY PHONE BRICKED WHAT HAPPENED" and stuff like that. Protects them, makes it easier for you. If you had made a backup before you flashed CM (usually you only have to back up whats on the phone if it has internal and external memory, but back up your sd card always just in case. never hurt to), then yes. If you backed it up with your previous ROM, then you'll probably need to revert to get it back. If you didn't, chances are whatever you didn't backup and didn't sync, is safe to say gone. You can try recovering it using a recovery software on the computer like i detailed here for another person, but of course you'd skip the whole trying to save the phone part and just start with mounting the phone to your computer and running the software.
CM is a custom rom, and so most (if not all) custom roms have root preinstalled (besides, who wouldn't want root?!) As for CWM, it works by being (usually) flashed into the recovery partition of your phone. The nice thing about the phone is that it's split up into parts: boot, recovery, system, and some other ones i can't think of off the top of my head. Those three are important, as if you get a softbrick, you might still be able to recover all your data simply by using CWM/fastboot (a dev-tool used to flash/unlock, but only available in certain phones, as it is disabled usually) to reflash the boot.img (one requires command line, whereas CWM only needs you to flash a created/pre-made package). Also, since they're in separate partitions, even if your system and boot.img doesn't work, you can probably still access recovery (unless you screwed up really REALLY bad, and in that case I can't help >.<)
Observant you are =] Yes, if you were to flash CM, your CWM will be gone (i don't understand why most people don't just bake it into the ROM in the first place) but, not all is lost. Just go back into the Android Market and redownload ROM Manager. Of course you'll need to open it up and flash the same exact recovery again (annoying, isn't it?) but unless you know how to mod zip/img files and edit the script, you'll just have to make do with that. If you do, you could just (usually) take out the recovery partition and just leave the one you have already in there (but its usually safer and better to just redownload/reflash it as annoying as it is). But yes, you would use CWM to flash it. It's as simple as "Install from SD Card" which is why custom recoveries like CWM are popular. So simple
At this point, I would look into a few things. One is skinning your phone (though you probably can't do too much if you don't want to touch system files). If you find a psuedo-rom (slightly modded) that themes it, that's your best bet. Another is gaining access to certain features in apps you didn't have before (i.e. androidLost, LBE Privacy Guard, titanium backup) and of course more control by the ability to control your system files (if you know what you're doing, of course). Lastly, you can use stuff like MetaMorph to theme out certain sections of your rom (provided that they give you one compatible with your phone model/rom), minus having to flash it and having more fine-tuned controlled. Usually, Metamorph will run on all ROMs, but it doesn't guarantee that there'll be stuff for every ROM. Also, want themes? google it (google is your best friend!)
Kies won't tell you that you have an upgrade because it is ROM-dependent. It looks for their official ROM and says "Hey, this guy has our ROM. Check for an update". Think of owning a custom rom like being kicked out of your family. You won't get anymore updates from them XD. However, if you're looking to get the latest updates, check out the Samsung Galaxy S Dev threads. They will usually have another method of loading in the new ROM into your phone. And if you want to stick with ROM Manager, shell out for premium and they'll include "Check for Updates" in ROM Manager, along with several other functions (though you can check for free via computer/browser ). Mostly, manually updating the software requires the "Install from SD Card" feature in CWM/other recoveries, so you don't have much to worry about.
Odin is, as you stated, most likely your best bet. Not too many people repackage official ROMs into easy-to-flash zips. Odin is the Samsung equivalent to Motorola's RSD Lite from what I googled (i have motorola, so no exp. on odin >.<) It's mostly like a dev tool allowing you to flash/re-flash phones and is also usually your one-way ticket out of a semi/full brick (assuming you didn't mess up the hardware and you can get into download mode). It's the flashing tool that can access the core system of the phone even without root and allows you to reflash OFFICIAL ROMs. Should you use Odin (should be your last resort), you WILL lose root and all your data. No questions asked. Its like reinstalling everything to the state in which you got it in when you bought the phone. Word of advice: BACK UP OFTEN! (did i forget to mention Titanium Backup? )
Yeah, the transition from Apple to Android is so different and had I not had experience with my PSP, i'd be dying with the information overload. However, just read a lot of stuff on the forums (*cough*general android forums*cough*) and you should be just fine. We have an excellent community here that will try our best to fix whatever problems you encounter (note the key word: try. we're not gods XD) You'll get the hang of it soon enough.
Oh, well, I don't want to keep you for much longer, but since you mentioned something that any noob should know, it's definitely ADB (Android Debugging Bridge). This is where you'll probably spend a lot of time, as people's fixes usually involve shell (terminal for your phone). If anything, get acquainted with it, as it might save your butt in the future/unlock a few extra features for you ;D .
Well, that's all i can think of, and honestly, after typing this thing up for about an hour now, I think I'm going to grab me some breakfast Good luck to you and welcome to the Android commmunity! (and next time, remember to post in the right place! XD)
~jojojohnson7410
P.S. PM me if you need anything. =]
Click to expand...
Click to collapse
Wow, thanks a lot. I still have a question or two, bear with me.
Well for one, is flashing roms made for different firmwares alright, or no? Since I have 2.2, and im assuming the latest cyanogen is made for 3.x, would I have to upgrade my firmware to the corresponding firmware.
And about Clockwork, if my phone bricks, I'd have to restore using odin, right? But if the phone still works, i can just root and cwm and restore it using rom manager?
And uh, I'm not sure if this is a problem or im just doing something wrong, but in RomManager, i click Backup Current ROM, and it goes into recovery mode, and theres no new options, there's just like, format, factory reset, clear cache, reboot, but nothing involving rom manager. And when i check for the recovery file in my sd card, it's not. Wut do.
WoZZeR999 said:
Just to nit-pick a bit. CWM is part of the recovery partition, and unless the Galaxy S is different from every other android device, flashing will not remove it. ROM Manager and CWM are two different things. ROM manager will allow you to download the roms, which will then instruct CWM to flash the rom (when it reboots).
Click to expand...
Click to collapse
lol true true that would be my mistake. XD Nice catch
~jojojohnson7410
Gutana said:
Wow, thanks a lot. I still have a question or two, bear with me.
Well for one, is flashing roms made for different firmwares alright, or no? Since I have 2.2, and im assuming the latest cyanogen is made for 3.x, would I have to upgrade my firmware to the corresponding firmware.
Click to expand...
Click to collapse
No, you wouldn't have to upgrade to the latest firmware to get the ROM installed. So long as the ROM is confirmed to work for your device, you can flash any ROM you want (which is convenient in my case since I have an Atrix 4G and it was oh-so-lonely without some Gingerbread XD)
Gutana said:
And about Clockwork, if my phone bricks, I'd have to restore using odin, right? But if the phone still works, i can just root and cwm and restore it using rom manager?
Click to expand...
Click to collapse
Well, the thing is, you really only need that usually if you're on a stock rom or some official version and either you want to flash a new stock ROM from Samsung or you want to pull your phone out of a brick. Most of the time, however, even if you bricked it, so long as you can get into the recovery menu, you'll be alright. Just re-flash the ROM that you want (or in my case yesterday when I was dealing with an Inspire, I had to use a different ROM to unbrick the phone. I don't know why this happen, but it was being nit-picky >.<)
Gutana said:
And uh, I'm not sure if this is a problem or im just doing something wrong, but in RomManager, i click Backup Current ROM, and it goes into recovery mode, and theres no new options, there's just like, format, factory reset, clear cache, reboot, but nothing involving rom manager. And when i check for the recovery file in my sd card, it's not. Wut do.
Click to expand...
Click to collapse
lol nooo this is not a problem at all. See, like the guy above me posted, the Recovery Menu is completely separate from anything in the ROM. It's located in the recovery partition rather than the system and the boot partitions, so they usually don't touch the recovery. ROM Manager is just a means of providing GUI to CWM so then you can either flash the CWM to your phone or help download ROMS into your SD card. Stuff like backup and everything needs you to boot into recovery as you can't be backing up the system while your system is mounted on, so they send you to CWM. From there, there's an option called "backup and restore". In this place, you can choose where to save the backup. And since the backup is made by CWM, it will be recognized by CWM if you want to restore it. I think it saves it in a zip file, but im not 100% positive, so take that one with a grain of salt.
Hope this answers the questions! Let me know if you need more help (or just PM me. I check that regularly )
~jojojohnson7410
jojojohnson7410 said:
No, you wouldn't have to upgrade to the latest firmware to get the ROM installed. So long as the ROM is confirmed to work for your device, you can flash any ROM you want (which is convenient in my case since I have an Atrix 4G and it was oh-so-lonely without some Gingerbread XD)
Well, the thing is, you really only need that usually if you're on a stock rom or some official version and either you want to flash a new stock ROM from Samsung or you want to pull your phone out of a brick. Most of the time, however, even if you bricked it, so long as you can get into the recovery menu, you'll be alright. Just re-flash the ROM that you want (or in my case yesterday when I was dealing with an Inspire, I had to use a different ROM to unbrick the phone. I don't know why this happen, but it was being nit-picky >.<)
lol nooo this is not a problem at all. See, like the guy above me posted, the Recovery Menu is completely separate from anything in the ROM. It's located in the recovery partition rather than the system and the boot partitions, so they usually don't touch the recovery. ROM Manager is just a means of providing GUI to CWM so then you can either flash the CWM to your phone or help download ROMS into your SD card. Stuff like backup and everything needs you to boot into recovery as you can't be backing up the system while your system is mounted on, so they send you to CWM. From there, there's an option called "backup and restore". In this place, you can choose where to save the backup. And since the backup is made by CWM, it will be recognized by CWM if you want to restore it. I think it saves it in a zip file, but im not 100% positive, so take that one with a grain of salt.
Hope this answers the questions! Let me know if you need more help (or just PM me. I check that regularly )
~jojojohnson7410
Click to expand...
Click to collapse
But theres no backup and restore options, its jut the recovery options you'd get if you were on a brand new phone.
Hello everyone. This is my first post, so please be gentle. I've been reading around and I can't seem to find specific answers to my questions so I figured it would be best to make a post. This is my first Android phone and also the first phone I have rooted so I'm trying to be extra careful. I've already received tons of help from other threads in these forums, but as I said I've still got a few questions.
I rooted my SGS4G using SuperOneClick v2.1.1, then proceeded to install CWM ROM Manager as per the instructions I found in many articles online. Once I got that installed I was unable to make backups as it would boot me into the stock recovery menu, which led me here searching for answers. That is when I came across this thread: [RECOVERY]CWM FINAL for the SGS4G After following the instructions I wasn't exactly sure what to do, so I attempted to boot into the "new" recovery menu which ended at an infinite boot logo, which I assumed was a soft brick after reading around a bit.
After thoroughly freaking out about my phone being bricked I looked around a bit more and came across this thread: [GUIDE] Noobs guide to Odin to flash your SGS4G (Windows) Following that thread I was able to install the T959VUVKB5 Stock + Root ROM which restored my soft brick. Once that was installed I installed CWM ROM Manager again thinking the Recovery Menu would be fixed and I could finally make a backup before moving on, but it wasn't. Then I came across this thread: [Odin][Kernel] drhonk's Bali 3.3 for Froyo, Installs CWM!
After installing drhonk's Bali 3.3 for Froyo kernel I was finally able to make a single nandroid backup (and backup my apps using Titanium Backup)! I messed around on the phone for a few days with no issues (other than the Android flickering in the boot logo). Now I am ready to move on to trying out a few ROMS. So, first thing first I said: I need to make another backup. So I entered the Recovery Menu via the CWM ROM Manager and attempted to make another backup, and this is what I get:
E: failed to open /etc..... (I couldn't write fast enough to copy the entire message)
E: unknown volume for path [/sdcard] (10s)
The second of which repeated over and over until it reached 0s and then my phone was rebooted.
TL;DR
- Rooted using SuperOneClick
- Installed ROM Manager and couldn't make a nandroid backup correctly
- Attempted to install CWM FINAL for the SGS4G, which resulted in a soft brick
- Restored using ODIN and installed T959VUVKB5 Stock + Root ROM and drhonk's Bali 3.3 for Froyo kernel
- Cannot make nandroid backups (other than the initial one apparently), Recovery Menu does not seem to be working correctly
- I am not comfortable trying new ROMs until I am able to make backups correctly
Anyway, so here are my questions:
1. What do I need to install to allow me to make nandroid backups correctly? Or is there another app besides CWM ROM Manager that will allow me to do this?
2. I would like to try a few other ROMs, but I when I reach the so-called "Do the mounting stuff" step I am unable to continue as my Recovery Menu isn't working correctly. What do I need to install in order to be able to do complete this step? I have a feeling the answer to #1 will solve #2 as well.
3. I would like to try a few of the GB ROMs (such as Valhalla v1.3.2 or Stock Gingerbread 2.3.3 Deodexed + Root), but I am not sure exactly where to go from here. Is the GB Ext4 Starter Pack the way I need to go, or would this way be better? Can I do either of these without a working Recovery Menu?
Thanks in advance for all the help!
Your first mistake was rom manager. It does not work for this phone correctly. Odin one of Dr honks kernels to get cwm recovery. They are in the dev section.
Sent from my SGH-T959V using xda premium
im not sure how many times this has been posted (i think i say this once a day....) but rom manager DOES NOT WORK ON THIS PHONE.
it is fine. if you can wait a day or two, i will make a nice noob guide on getting from stock to a custom rom. i will be sure to link every pertinent thread and be sure to have a little FAQ section. hopefully it will help you.
Exodian said:
Your first mistake was rom manager. It does not work for this phone correctly. Odin one of Dr honks kernels to get cwm recovery. They are in the dev section.
Click to expand...
Click to collapse
As I said in the post, I've already installed drhonk's Bali 3.3 for froyo kernel.
jager555 said:
im not sure how many times this has been posted (i think i say this once a day....) but rom manager DOES NOT WORK ON THIS PHONE.
it is fine. if you can wait a day or two, i will make a nice noob guide on getting from stock to a custom rom. i will be sure to link every pertinent thread and be sure to have a little FAQ section. hopefully it will help you.
Click to expand...
Click to collapse
Thanks, but I figured that out shortly after installing it. What alternative are we supposed to use? Hopefully your noob guide will help.
are you sure you understand? seeing as you mentioned BOTH bali and krylon's cwm, yet you still do not know how to get the custom recovery on the phone. once again, i will write a nice guide for you, so for now, just odin back to stock and give me a day or two. once im out of work, i will take a nap and write this for you.
jager555 said:
are you sure you understand? seeing as you mentioned BOTH bali and krylon's cwm, yet you still do not know how to get the custom recovery on the phone. once again, i will write a nice guide for you, so for now, just odin back to stock and give me a day or two. once im out of work, i will take a nap and write this for you.
Click to expand...
Click to collapse
Apparently I do not understand. I guess I will just wait for your guide. Hopefully it will pick up where the other guides failed (for me anyway).
Edit: After reading around a bit I think I understand where I went wrong. As a noob I was confusing CWM with ROM Manager (after all, they're both made by the same people right? I believe that's what was confusing me ). I have since uninstalled ROM Manager and have booted to the Recovery Menu and successfully made a backup.
I myself have been a member for coming up on one year. And when I originally joined I was modding my Mytouch 3G. Much easier phone to mod and especially with ROM manager. This phone on the other hand requires more attention to detail. It is very important to do your due diligence to research this site for answers before posting. The reason is, all the wonderful and talented folks making all this possible are providing us all these great hacks, cracks, and roms for free. The information is here if you just look for it. Now if you are having trouble understanding the info that is also understandable. I find questions are better received if you show everyone what you have researched and then say what your are confused about.
Enough of the lecture, the end result is that everyone here is really nice and helpful. Here are the 3 links you should save. The Bible lists everything about our phone. Now at this stage in the game unless you really want to get more background on how the phone has evolved from Froyo to GB you won't need to read the Bible. The first thing you will need to do is follow the instructions for Bali 3.3 + CWM. This will provide you with the Red CWM recovery making it possible for you to flash Froyo Roms. Once you have completed this step you can move on to the GB Starter Pack. This guide will prepare your phone with the correct bootloaders it requires to run GB Roms. Once this process has been completed you can flash GB Roms. And if you need a quick list of the roms available just look in the Bible. Hope this helps, just be patient and make sure you understand what you are reading and attempting before doing anything. And if you don't understand a step or a process then come and ask and you'll get better answers and better understanding of what you're actually doing to your phone.
SGS4G Bible
http://forum.xda-developers.com/showthread.php?t=1117554
Bali 3.3 + CWM
http://forum.xda-developers.com/showthread.php?t=1195860
GB Starter Pack
http://forum.xda-developers.com/showthread.php?t=1223765
Thanks for the help. I tried to do as much research as I could before posting (as you can see, I've posted two of the three links you suggested in my OP, and I basically keep the Bible open at all times ). It's just the little things that I find confusing, which is why I posted this thread. It's nice to know that from this point I can proceed to the GB Starter Pack and play around with the GB ROMs, but I think I'd like to try a few Froyo ROMs before I take that step Thanks for confirming that!
Sorry for the double post but I have another question.....
I've been reading over FB's GB Ext4 Starter Pack thread and I just wanted to make sure that once you get to the part where you flash your "favorite GB rom" that Valhalla v1.3.2 would be an acceptable ROM to flash there. If not, which ROM should I flash first, then flash Valhalla? Thanks in advance.
Yes, Valhalla would be fine to flash at that point (any version). just as long as you went through each step of the directions first. you'll be fine.
I've tried everything I can think of to get ClockWorkMod working on the SGH-T959V. I have rooted the phone with SuperOneClick and I've installed ROM Manager. After I start rom manager and select 'Flash ClockworkMod'. I get a list of 4 phones and mine isn't listed, the closest one is the Samsung GalaxyS i9000 which I have tried but when I reboot into recovery I never get the ClockworkMod Recovery.
Any ideas are greatly appreciated.
Thanks.
Rom manager doesn't work with our phones to get cwm you have to flash a kernel that has it in it
Sent from my GT-P7510 using XDA
1) DO NOT use ROM Manager (or as Raver memorably put it, ROM Mangler) on this phone - you will mess it up.
2) Any of the modified kernels in the Development section will give you CWM. Try AntonX's kernel (assuming you are on a stock ROM) - I found it gave best results. Use the SGS Kernel Flasher from the Market/Play - it's the easiest way to install a new kernel.
3) Before asking any more questions, read Read READ. Read the guides and the stickies, then read them again. I have found the guides of lumin30 and juls317 to be very helpful.
If your phone is still on Froyo, then look in the Dev section for Krylon360's recovery. If you're on Gingerbread then read the post above this one as there are plenty of ROMs/kernels for this phone that have CWM.
Really man, do you read.
Sent from my SGH-T959V using xda premium
The easiest way is just get one of the one click packages. I just updated the thread today. Note it is a sticky thread. It will always be easy to find at the top of the dev forum
No need to flash the whole rom or fuss with odin or heimdall cli/frontend.
Lets keep the thread friendly. Please search
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
jet_98 said:
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
Click to expand...
Click to collapse
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
xc-racer99 said:
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
Click to expand...
Click to collapse
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
jet_98 said:
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
Click to expand...
Click to collapse
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
xc-racer99 said:
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
Click to expand...
Click to collapse
If you are in the correct idea that's what happens to me
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
jet_98 said:
If you are in the correct idea that's what happens to mein the state you are in, can you get to
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
Click to expand...
Click to collapse
Ok, I might be able to understand some of the Spanish as I speak French as well, but lets keep going in English.
Anyways, when you go into recovery (I assume you can still get into recovery), does it say <3e> or CWM? If it says CWM, is it red or blue? If its <3e>, then you're still on stock recovery and the kernel didn't flash properly.
Also, can you please go to Settings, About Phone, and read off the Kernel Version? If you can't get there, what is the last screen you see before it reboots?
First off love the N00b video at sign up that was hysterical, nice work to whoever made it.
Ok on to what I need to know:
I understand HOW TO root/flash a rom, my issue is kind of different than most peoples. I have scoured the web and this site for the files I need to accomplish this with my GT-P3113 build ending in LG5 however I am confused to hell.
1 place will say that CWM 6.0.1 is not usable on my device, another will say that it works fine and another will say to use TWRP (which might I add looks cool to use). Some will say that I need the expresso_wifi file to root my device, others will say use update.zip, and others will say a totally different file all together.
I know what ROM to get, I understand the steps:
Download drivers
Boot to download
use odin to install CWM
back up everything with CWM (which goes to the MicroSD I am guessing? since I wipe the device in a later step)
wipe the device
wipe the cache
wipe the Dalvik cache
flash the rom
flash the root
is all that correct? (just to make sure I got it right) so my biggest question is, which files do I really use? There is a thread from back in June before the 4.0.4 update OTA came through) saying to use instead of that if you have LG3 or etc.
Help would be greatly appreciated, I am a smart guy, just want to have my facts straight before I make this happen.
PS sorry if this is in the wrong place, figured this was the best place for it.
Please be sure and thank the person who decides to do your homework for you.
:laugh:
FlynnErik said:
First off love the N00b video at sign up that was hysterical, nice work to whoever made it.
Ok on to what I need to know:
I understand HOW TO root/flash a rom, my issue is kind of different than most peoples. I have scoured the web and this site for the files I need to accomplish this with my GT-P3113 build ending in LG5 however I am confused to hell.
1 place will say that CWM 6.0.1 is not usable on my device, another will say that it works fine and another will say to use TWRP (which might I add looks cool to use). Some will say that I need the expresso_wifi file to root my device, others will say use update.zip, and others will say a totally different file all together.
I know what ROM to get, I understand the steps:
Download drivers
Boot to download
use odin to install CWM
back up everything with CWM (which goes to the MicroSD I am guessing? since I wipe the device in a later step)
wipe the device
wipe the cache
wipe the Dalvik cache
flash the rom
flash the root
is all that correct? (just to make sure I got it right) so my biggest question is, which files do I really use? There is a thread from back in June before the 4.0.4 update OTA came through) saying to use instead of that if you have LG3 or etc.
Help would be greatly appreciated, I am a smart guy, just want to have my facts straight before I make this happen.
PS sorry if this is in the wrong place, figured this was the best place for it.
Click to expand...
Click to collapse
From someone relatively new to this as well, this is basically correct. Here are some tips from someone who has recently done it.
Make a backup.
Research the files you intend to flash, make sure they are right for your device
Verify the guide you are using has been tested and known to work.
This may seem elementary, but I didn't follow #3 and it cost me a lot of headache un-bricking my SGT 2.
ryphil said:
From someone relatively new to this as well, this is basically correct. Here are some tips from someone who has recently done it.
Make a backup.
Research the files you intend to flash, make sure they are right for your device
Verify the guide you are using has been tested and known to work.
This may seem elementary, but I didn't follow #3 and it cost me a lot of headache un-bricking my SGT 2.
Click to expand...
Click to collapse
Fully agreed! That's why I came to the experts. I have done my homework but the thing is my homework leads me to several different files from before the ICS update. There has only been 1 thread on 1 forum that has been post ICS update, and no real feedback on it. I think I even found one that uses ADB (I understand that concept, but would prefer not to use it since I don't know Linux well enough).
I would love to know what files to use, which ones to stay away from. As I said I have the concepts, I have the understanding, its the actual files that I want to verify, I can rattle off tons of files from tons of sites, but they may or may not be correct (and may have the same name as a correct one but still be incorrect, ie "update.zip" appears a few times on different threads from different time frames).
There is only post in the teamhacksung CM10 wiki that was last edited 8/12/2012, but that could have been anything that was updated, not the files/links to be used.
So I thank you in advance for your help, and you will certainly get a thank you in the forum for help you are providing, I always give credit where credit is due.
Well here goes nothing, going to reboot (to ensure the Kies drivers are installed and loaded into the system 100%), and try the instructions from this link http://forum.xda-developers.com/showthread.php?t=1788625
It seems to work for most, the only concern I have is that I have a different end to the build than most others do (and I am not sure why?)
Did I screw myself?
I rooted, and have CWM installed.
Is it to late to create a ROM backup of my device for when i go to install CM10 (I need a drink for now, so I might install it tomorrow night lol).
That link I posted in the last post is good to go if anyone else needs a safe bet set of directions.
Seriously though, I didn't do a backup, am I screwed now?
EDIT: I just did a back up and it said no sdcard/.android secure found, skipping of backup of apps
and
no sd-ext found skipping backup of that.
is that normal? Did it backup to my microSD?
Still hope I didn't screw myself by backing it up after rooting.