Related
I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot
MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App
Why ji6? What are the benefits other than the audience chip will work?
I just downloaded Rom manager and it says i need clockwork recover installed. So i select it.
It gives me 4 choices.
1. Google nexus S
2. Google nexus S 4G
3. Samsung epic 4G
4. Samsung Galaxy S i9000
I have a Samsung Galaxy Captivate i896 (Rogers).
Which one do i select?
Im guessing the i9000 but i will await a reply!
Thanks.
Satstalker said:
I just downloaded Rom manager and it says i need clockwork recover installed. So i select it.
It gives me 4 choices.
1. Google nexus S
2. Google nexus S 4G
3. Samsung epic 4G
4. Samsung Galaxy S i9000
I have a Samsung Galaxy Captivate i896 (Rogers).
Which one do i select?
Im guessing the i9000 but i will await a reply!
Thanks.
Click to expand...
Click to collapse
You'll need option 5: None of the above.
Seriously, though, Rom Manager doesn't work that well for the Captivate. You'll be in much better shape if you do the things that Rom Manager normally handles by yourself.
jmtheiss said:
You'll need option 5: None of the above.
Seriously, though, Rom Manager doesn't work that well for the Captivate. You'll be in much better shape if you do the things that Rom Manager normally handles by yourself.
Click to expand...
Click to collapse
Really!!! Damn. I just bought Rom manager premium and was going to flash CyanogenMod on my phone and i found a video using rom manager and it seems a lot easier to do with it.
Im wondering if its because i changed the stock kernel so i could root the phone! I put the mtcareys-kernel on following a user post.
I bet that's why i does not recognize the phone.
Sorry to hear you spent the money, but maybe it's not entirely bad - Rom Manager works on a lot of other devices, and you can (I believe) transfer the program between devices.
Rom Manager might not recognize your device if the build.prop file was edited. That could be why it's showing the I9000 option.
As far as flashing CyanogenMod, it's fairly straightforward:
1. Flash a kernel that will let you use CWM Recovery (Corn Kernel should have it - Boog's kernel does too, and if you need Froyo, look for speedmod).
2. Once in Recovery, flash the CM update.zip (you may have to do this twice. If so, reboot to recovery again, and flash again).
That should get you to CyanogenMod.
jmtheiss said:
Sorry to hear you spent the money, but maybe it's not entirely bad - Rom Manager works on a lot of other devices, and you can (I believe) transfer the program between devices.
Rom Manager might not recognize your device if the build.prop file was edited. That could be why it's showing the I9000 option.
As far as flashing CyanogenMod, it's fairly straightforward:
1. Flash a kernel that will let you use CWM Recovery (Corn Kernel should have it - Boog's kernel does too, and if you need Froyo, look for speedmod).
2. Once in Recovery, flash the CM update.zip (you may have to do this twice. If so, reboot to recovery again, and flash again).
That should get you to CyanogenMod.
Click to expand...
Click to collapse
Clockwork mod recover. Is that the blue writing that comes up when you press and hold volume up and down and then power? If so then yes i do have that. I used that to root the phone with the corn kernel. Little green guy with a yellow corn a boot up!
I did down load the latest stable version of CM. (update-cm-7.1.0-Captivate-signed)
It says to Place the CyanogenMod update.zip file on the root of the internal memory. But then it says Select Install zip from sdcard.
Also where is the update.zip file? And does it go on the root of the sd card or the root of the internal memory!
I'm following the guide here. http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide#Before_you_do_anything_.E2.80.94_Make_a_backup
The actual name of the file you downloaded isn't that important. You can leave it with whatever it comes as. The "update.zip" they're referring to is the CM build you downloaded.
What you'll need to do is to copy the .zip file onto your phone Internal SD (the 13 GB partition) at a place you can find it easily. Once you've done that, reboot into CWM recovery (the menu with about 7-9 options, including "install zip from sdcard". It may have blue writing, depending on which build it is. If it only has 4 options, you don't have CWM recovery, but stock recovery.).
Once you're there, select the install zip from sdcard option, and navigate to where you put that zip file. Choose to install it and let it run.
If you're confused about whether you're putting an item on the internal sd card or not, you can connect your phone (including doing the "connect usb storage" dialog) and see what the drive sizes are. Once you know for sure which is your internal SD (13 GB), and which is your external SD (GB based on your card size), you can then re-label them in Windows (e.g. Internal SD and External SD). Those labels will usually stick pretty well.
oops
i was going thru my file manager to get rid of some old downloads and files and i deleted update.zip. i am now pretty sure it was for rom manager or cwm and remember seeing somewhere that it is supposed to stay on the phone.
how to fix this? download new rom manager?
I have noticed lately that when i want to reboot to recovery from rom manager to flash something it just reboots the phone.
bradddo said:
i was going thru my file manager to get rid of some old downloads and files and i deleted update.zip. i am now pretty sure it was for rom manager or cwm and remember seeing somewhere that it is supposed to stay on the phone.
how to fix this? download new rom manager?
I have noticed lately that when i want to reboot to recovery from rom manager to flash something it just reboots the phone.
Click to expand...
Click to collapse
1. Don't worry about the .zip
2. Don't use ROM manager for this device
Sent from my SGH-I777 using xda premium
That s what I was hoping. I don't know what I have actually used this for , I just thought I needed it. I Normally boot to recovery and flash from there. Can I delete it, or is there a purpose for it?
Sent from my SGH-I897 using xda app-developers app
The update.zip contained cwm and was used during the eclair 2.1 days. Now days to get access to cwm we have custom kernels and we can use the extended power button menu of dev roms, button combo, apps, etc. to boot into recovery...so yep, don't worry about keepin it, unless u plan on goin back to eclair.
Sent from my SGH-I897 using xda premium
**this was a very early guide and most of the files and methods referenced in it are long outdated, sounds crazy I know as the phone has barely been out, but i recommend finding more recent guides at this point. I wanted to leave this up for archival reasons though. As of 7-22 I am running dhackers CM10 build with great results. Just don't forget to set max cpu clock back down to 1500 mhz if you don't want it over locked out of the box **
As per the usual disclaimer....at your own risk, be aware of IMEI loss issues and whatnot...basically cover your own butt.....and enjoy.....
7-15 2:46pm **As of right now voice and SMS are not working on my phone while other people report they are working fine. While you can still play around and see just how amazingly fast CM is on this phone, YMMV. If it doesn't work you need to know how to go back to stock before trying this.
7-29 this guide is very old, it pre-dates kexec and is only here for historical purposes
For clarification: The question was asked if one is supposed to follow the original Team Epic Kexec kernel instructions or these steps and the answer is two fold. If your goal is to install the UNOFFICIAL CM9 built by Invisiblek (which is the purpose of this thread), then you follow the steps in THIS THREAD ONLY. There are a couple steps and a couple files linked to in the original Kexec page that will not allow you to install CM9. That page was made for those wanting to try out their Kexec Proof of Concept KERNEL, not install a ROM of any kind.
This thread makes some assumptions, such as you already have a working install of the Android SDK and ADB, you already have the drivers installed, you are using the original USB cable that came with your phone, you know how to move around DOS to get to the directory where you downloaded the files, etc.......those lower level tasks are for another thread.
To Try Our Proof-of-Concept Kernel <<<The base of these instructions was the Team Epic Kexec Kernel page seen at this link, Many Thanks to them
Thanks to Invisiblek for clarifying and helping me get steps just right.
The following is an adaptation of the CM Kexec kernel proof of concept with the changes in files and steps necessary to load the latest CM9 work in progress. Be advised I take no credit at all. This is the work of Team Epic and Invisiblek. I just put this together for myself and for others who would like to try it with one caveat. DATA doesn't work! Voice and SMS only....and maybe 1xRtt data.....so you will be relying on WiFi for data! You've been warned!
Also, I highly suggest you use a free MD5 Hash checking utility to verify the integrity of the files you are downloading. That is why the MD5 hash is provided, so you can be sure you didn't get the wrong file or a corrupt download that could cause a BRICK!
If you don't follow the directions carefully you can end up with a brick! Ask questions after reading the OP if you still aren't sure. I probably won't know the right answer for sure. You may have to wait on someone with more experience in this to answer your question.
DO NOT ACCEPT AN OTA UPDATE WHILE RUNNING THIS SETUP
1. Download the recovery.img (MD5: f1c01ad20e02751a73188f173eb412ca), which combines our source-based kernel with our previously released CWM v4.
2. Flash the recovery.img following these instructions, that is:
Code:
adb push recovery.img /sdcard/
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 bs=256k
sync
3. Reboot into recovery (using volume up, home power buttons), wipe data, install one of invisibleks CM9 roms>click here for all of his CM9 roms< which do not have boot.img integrated, then continue with the steps below:
4. Download these additional files:
(required download)boot.img (MD5: db058f4b15df0fa1b9ee04a5c17cf103), which is invisibleks custom boot.img
It would be good at this point to read ahead and determine where you will be loading the next file. Keep in mind if you are in stock recovery and choose to wipe data, this will wipe the internal memory.
if you plan to load onto internal memory download this file boot_emmc_boot_img.zip (MD5: 84a3f98c194f6dedc583dbc75ccc34c2)
or
if you plan to load onto sdcard (ext) memory download this file boot_sdcard_boot_img.zip (MD5: 88904d7e69d455ff88756b4d1ad79aac), which are applied in recovery to kexec (boot) the custom boot.img.
5. Place boot.img either on the internal SD card (the /sdcard/ folder), or on the external SD card (the /mnt/extSdCard/ folder).
The boot.img kernel boots directly out of one of these folders, it will not (and should not) be flashed to the device.
6. If you're using the internal SD card, place boot_emmc_boot_img.zip in /sdcard/ as well. If you're using the external SD card, place boot_sdcard_boot_img.zip in /mnt/extSdCard/.
7. Reboot into recovery.
8. If using the internal SD card, select "Install zip from sd card" and then "choose zip from internal sdcard", then "boot_emmc_boot_img.zip". Alternatively, if using the external SD card, select "choose zip from sdcard", then "boot_sdcard_boot_img.zip".
At this point, the device should reboot "in the middle" of applying the update, temporarily booting boot.img. If the update "completes" and returns to the CWM menu, kexec has failed or the wrong recovery was loaded in the beginning. Please check the locations of boot.img, and boot_emmc_boot_img.zip or boot_sdcard_boot_img.zip and verify recovery.img file used was the correct one, verify using an MD5 hash checker.
9. Once booted, the custom kernel can be confirmed by checking "Kernel version" in "Settings", "About device". It should report:
3.0.8-gdefeb6f
[email protected] #1
SMP PREEMPT Sun Jul 8 04:27:58 EDT
2012
10. To reboot into the stock kernel, select "Restart" from the Power menu, which will actually reboot into CWM recovery. Press the Power button to select "reboot system now" and leave recovery.
11. You cannot simply power on your phone with this setup! In order to power on your phone you will have to hold volume up, home and power to boot into recovery and load the zip file you chose at step 4 where you chose either internal or external memory, so either "boot_emmc_boot_img.zip" or "boot_sdcard_boot_img.zip". If you do accidentally boot up by just hitting power, no big deal, it will give you all sorts of force closes, simply pull battery and boot back up using the Vol up, Home, power method.
If anyone would like to suggest further clarification, please do. To get the stock Google apps such as Play Store get the package HERE and install in recovery
Alternatively a more condensed version of this install procedure has been posted by nbsdx and can be found HERE.
7-15 2:46pm **As of right now voice and SMS are not working on my phone while others are working fine. While you can still play around and see just how amazingly fast CM is on this phone, YMMV. If it doesn't work you need to know how to go back to stock before trying this.
If you want to return to bone stock, simply go to THIS THREAD to get STOCK ROM IMAGE and then put your phone into Odin Download mode by following THIS THREAD and be sure to flash it using the PDA button. It will take a while, probably 20 minutes or so, it will take forever to boot up the first time but you will be on bone stock like new.
Very informative. Would read again.
Sent from my Transformer Prime TF201
dual boot
Being that we have to use kexec anyhow, it would be nice (especially with the state of current cm9 rom) if we could fully dual boot so as to keep stock system and data for stock kernel.
Like here,
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
I just installed successfully using the instructions in the OP so I can confirm it works correctly. Holy crap it's fast.
Anybody want to put up a video of how well it runs for us that aren't brave enough to put it on our own phones?
Sent from my SCH-I535 using xda premium
dakalter said:
Anybody want to put up a video of how well it runs for us that aren't brave enough to put it on our own phones?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I'll leave that part to someone who doesn't sound like a retarded redneck on video.
silasrye said:
I tried to install the vzw cm9 (with with invisiblek's boot.img put back into the zip) via this method exactly.
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
fake cwr works, and everything went fine, but when i try to flash boot_cm9.zip i stay in cwr.
I am using the cwr from this post
http://forum.xda-developers.com/showthread.php?t=1773514
I had started with the twrp from that post, but it didn't recognize my internal sdcard.
So, I don't see why this shouldn't be a doable thing. But something probably needs to be redirected somewhere.
The good news is, I boot into my normal rom without problem.
Click to expand...
Click to collapse
If you follow the steps in this thread, including using these links for your files, it will work without a problem.
I can't comment on why other guides on other sites using other files don't work.....and not really sure how it applies to this thread. Lets try to keep it on topic. If you have issues with the dual booting instructions, you might start a new thread to address that or jump in irc.freednode.net/verizons3 and graciously ask the people for help
When you flash the the CM9 rom built by Invisiblek it will come back out to CWR menu. At that point in the process I realized I hadn't copied the boot.img file into the root of my sd card, so i left it on the CWR menu, popped out the sdcard, copied the boot.img file over (already had the boot_sdcard_boot.img file on the root of sdcard), and popped the sdcard back in, chose advanced->reboot recovery, then followed the steps in this guide, worked perfectly.
silasrye said:
I tried to install the vzw cm9 (with with invisiblek's boot.img put back into the zip) via this method exactly.
http://www.epiccm.org/2012/07/dualboot-cm9-on-sgs3-lte-sprint-t.html
fake cwr works, and everything went fine, but when i try to flash boot_cm9.zip i stay in cwr.
I am using the cwr from this post
http://forum.xda-developers.com/showthread.php?t=1773514
I had started with the twrp from that post, but it didn't recognize my internal sdcard.
So, I don't see why this shouldn't be a doable thing. But something probably needs to be redirected somewhere.
The good news is, I boot into my normal rom without problem.
Click to expand...
Click to collapse
You need to add one line to Invisiblek's updater-script that "flashes" the boot.img to the bootloader partition in the multi boot folder. Check out the sprint cm9 install for the line to add.
I have tested dual booting to work perfectly.
is the data not working due to the ril??
suzook said:
is the data not working due to the ril??
Click to expand...
Click to collapse
yes, will update OP once we have working 3G/4G data
as of right now my voice and SMS isn't working while others is.....trying to figure it out
I flashed back to stock, simply because I need to have voice and SMS working. I could deal without 3G/4G data for a little bit and use WiFi, but no SMS/Voice was a deal breaker on my phone. I have to be easily gotten in touch with for work and such. It was fun while it lasted.
Will these same instructions work for the CM10 build that is in the server list?
17akota said:
Will these same instructions work for the CM10 build that is in the server list?
Click to expand...
Click to collapse
No. Different files used, probably a different step or two also. I plan to edit this once CM10 builds are ready for public consumption. These instructions also don't include the automated kexec scripting work done recently that allows your device to cold boot into CM9.
Sent from my SCH-I535 using xda premium
neyenlives said:
No. Different files used, probably a different step or two also. I plan to edit this once CM10 builds are ready for public consumption. These instructions also don't include the automated kexec scripting work done recently that allows your device to cold boot into CM9.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I figured that.
Could you point me in the direction of the new Kexec? I read about it somewhere and would like to try it out.
17akota said:
I figured that.
Could you point me in the direction of the new Kexec? I read about it somewhere and would like to try it out.
Click to expand...
Click to collapse
irc.freenode.net #verizons3
Sent from my SCH-I535 using xda premium
i came from a thunderbolt, and know how different a RIL can be from phone to phone, so i ask this quite seriously...
How different is the RIL from the Gnex to the SGIII?
seang said:
i came from a thunderbolt, and know how different a RIL can be from phone to phone, so i ask this quite seriously...
How different is the RIL from the Gnex to the SGIII?
Click to expand...
Click to collapse
Completely different processors.
Is there anyway to get the TouchWiz Camera on CM9? I really like that camera app.
I tried just putting it in /system/app and changing the permissions to rw-r--r-- and rebooting and nothing
Then i tried just installing it like a normal apk and it failed.
I would love CM9 if i could just get the stock camera app too work.
BTW im using DHacker29's CM9 and its amazing. So much easier to install.
17akota said:
Is there anyway to get the TouchWiz Camera on CM9? I really like that camera app.
I tried just putting it in /system/app and changing the permissions to rw-r--r-- and rebooting and nothing
Then i tried just installing it like a normal apk and it failed.
I would love CM9 if i could just get the stock camera app too work.
BTW im using DHacker29's CM9 and its amazing. So much easier to install.
Click to expand...
Click to collapse
It probably requires touchwiz frame work. It will take significantly more work than just dropping in an apk
Sent from my SCH-I535 using xda premium
DHacker's CM10 is awesome!! I've been running it all day and Jelly Bean is really smooth on the S3.
http://www.droidhive.com/forums/index.php?/files/category/26-sgs3/
Check it out guys.
ALL:
It has been a long time since I posted to this thread. Back then, the Samsung Exhilarate had just come out, and there was no way to root it. Thanks to several other members, most notably j3r3goss and shabbypenguin, I was able to get root on this phone. As of now, this post is very old. The instructions here, are not needed for you to root your Samsung Exhilarate anymore. You are free to read through them, but you should pay attention to the last page (currently page 3). There, j3r3goss posted a link to the the TWRP or CWM recovery files, that you can now use to get root, without following the step-by-step instructions I posted below. I'm leaving the thread up, but for all intents and purposes, consider it closed.
Here's the link to the section you need in order to root your phone:
http://forum.xda-developers.com/show...php?p=32520094
It has been fun, and I've been using my Exhilarate for nearly two years. Because I've been extremely busy, I haven't had time to keep up with the latest changes - but others have. I hope that you found these instructions useful.
In any case, take care and ROOT ON!
Everything past this point is old and no longer applicable
==========================================
IMPORTANT NOTE: If you have UPDATED your phone to ICS, and want to root it, these instructions will work. You will not need to do the last part where you need to update the firmware keys!
Do you plan to update your phone from Gingerbread (Android 2.3) to Ice Cream Sandwich (Android 4.0). Do that first! Otherwise, you'll just have to root again (not that that's a problem, but why???)
I) How to update to ICS:
1) Download Samsung Kies from here: http://www.samsung.com/us/kies/ if you haven't already, and install it, and then run it
2) Put your phone into ODIN (Download mode - see section II below).
3) When Kies detects you phone (your computer will need to install drivers, and then Kies will say it's connecting to your phone, and it will take about 3-4 minutes and finally connect to it), it should let you know that there is an update. Just follow the instructions on Kies and be patient. The phone will update, and once it reboots into normal mode, you'll know it's updated by going to "Settings" and if they are grouped into different sections, then you have ICS. Otherwise, you probably still have GB.
II) How to enter ODIN Mode:
For the Exhilarate I've found it's best to use this sequence:
1) Power phone down
2) Plug the USB cable into your computer (do not plug the phone into the USB cable yet).
3) While pushing and holding both the vol up and vol down buttons, plug the phone into the computer. As soon as you see "SAMSUNG" flash and then dissappear, release the buttons.
4) Phone should boot into ODIN mode.
III) How to Root
What you need:
1) Samsung Galaxy Exhilarate phone (unrooted)
2) microSD Card (any size of 1GB or larger will work)
3) USB cable to connect your phone to your computer
4) Files below
First, download all the files...
1) Download the latest version of ODIN here: ODIN.
2) Download the drivers here: Samsung Galaxy Drivers and run the setup program after unzipping.
3) Download the tar file here: www.Shabbypenguin.com/OUDstuff/Blaze4G/Clockworkmod-Blaze-4G.tar Don't mess with it, just download it somewhere where you can find it later
4) Download SuperUser here: SuperUser Save it somewhere where you can find it later.
Second, conduct the root:
1) Put your phone into Odin (Download mode - see Section II above).
2) With phone in ODIN mode, run Odin.1.85.exe (it's in the folder where you unzipped ODIN too).
3) Odin will launch on your computer. It should show, in the first box under ID:COM, a port in yellow. Mine was Port 5. This means you have successfully connected to your phone.
4) Click the button in ODIN labeled "PDA", and then browse to the .tar file you downloaded above and then select "Open". The file will show up next to the PDA button.
5) Make sure that "Re-Partition" is NOT checked!;
6) Click "Start" and wait till your phone reboots. It should reboot into normal mode. If it doesn't, just power down and reboot into normal mode.
7) Copy the SuperUser.zip file you downloaded above to your phones microSD card.
8) Reboot the phone into recovery mode: While pushing and holding both the vol up and vol down buttons, push the power button. As soon as you see "SAMSUNG" flash, release the buttons. You shouldn't need to have the phone connected to the computer this time. The phone will boot into CWM recovery.
9) using either: the "menu" button to move down and the "home" button to move your selection up; or alternately the volume down button to move down, and the volume up button to move up: highlight "install zip from sdcard". Use the "search" button or power button to select/enter.
10) highlight "choose zip from sdcard" and press the "seach" button to select it.
11) browse to the directory which you copied SuperUser to and select it.
12) scroll down to "Yes - Install Superuser" and select it.
13) Once done, reboot your phone into normal operating mode.
14) If rooting Gingerbread, see Section IV below.
15) If rooting either Gingerbread or ICS, see section V below.
16) If having issues with Root, see section VI below.
IV) Rooting Gingerbread?:
Last: Finish up (Steps 1-4 are ONLY needed if you are still using GingerBread and not Ice Cream Sandwich):
NOTE: Your buttons (the four at the bottom) WILL NOT work at this point. You need to do the following:
======
1) Push your phone dialer as if you were going to make a call.
2) Dial *#*#2663#*#*.
3) You will see the attached thumbnail below on your phone (stolen from j3r3goss).
4) press the bottom button that says "Touch key FW update". Wait. Once it's finished, your bottom row of buttons will work again!
Note: If you are on GB, and not ICS, every time you boot into recovery and then back into operational mode, you will need to do the four steps in this section above!
======
V) Using either GB or ICS:
You do need to do these last steps (I believe):
5) ADDENDUM/UPDATE: At this point, there is one last thing you need to do!: You must go to "Settings/Applications/Development" and Enable USB Debugging! If you don't do this, you will NOT be able to get root access! Also, if for any reason you turn off USB Debugging, make sure you turn it back on! If you lose root access, check this FIRST! If you still can't get root access, boot into recovery mode and wipe the Dalvik Cache, the regular Cache, and "Fix Permissions". Then double check to make sure USB Debugging is ENABLED!
6) You're done! Your phone is now rooted and you can do whatever you want! :highfive:
VI) TROUBLESHOOTING:
If you run into problems
1) Check to make sure that SuperUser is installed on your phone. Check the apps section first, and then, use RootExplorer and check the System/bin folder. If you see SuperUser is in the system/bin folder, then you are very close to being rooted.
If it is not installed:
a) make sure that you copied the superuser.zip file to the EXTERNAL sdcard.
i) Boot the phone up normally
ii) plug the phone into your computer, pull the notification bar down, select USB connection, and tap the "Connect USB storage" button.
iii) Using Winbloze explorer, copy the SuperUser.zip to the external sdCard (on my computer, it is drive F:, and the Internal is drive G.
iv) disconnect once the copy is finished and use any file explorer on your phone to check the contents of the external sdCard (look in the "sdcard/external_sd" folder)
v) if it's not there, then you are doing something wrong. If it is there, shut down the phone, and boot into CWM recovery.
vi) Use CWM recovery to install the superuser.zip file on your phone.
vii) reboot into normal mode
viii) check to make sure that you have enabled USB Debugging
viii) check again to see if SuperUser is now in your apps, and in the system/bin folder.
ix) Run SuperUser 1x, and then close it out.
x) Run ANY app that requires Root Permissions. You should get a request from SuperUser to "Allow" or "Deny" the app root access. Make sure you allow root access. If you make a mistake, you'll need to launch superuser again and completely remove the app from the denied list.
2) Make sure USB Debugging is enabled.
3) if you still can't get root, boot into CWM Recovery, and try clearing the cache and the Dalvik cache, and resetting permissions, then reboot and check everything again. You may need to do this last step several times.
Beyond that, I don't know what else might be causing you to not gain root access, so keep trying.
If anyone has any questions, feel free to PM me.
V/R
BlackWolf
Thanks for the write-up Black-wolf.
I wasn't aware that the touch key fw needed to be updated each time after booting recovery,hopefully that is something that will be fixed when Shabbypenguin gets his hands on the stock recovery.
Personally I find the easiest, works every time method to get into Download mode is to have the usb cable plugged into the pc, then while holding the volume up/down buttons, plug the cable into the phone, continue holding vol up/down buttons until download mode boots.
Sent from my Liberty using xda premium
j3r3goss said:
Thanks for the write-up Black-wolf.
I wasn't aware that the touch key fw needed to be updated each time after booting recovery
Click to expand...
Click to collapse
Yeah, I figured that out when I went to boot recovery to check something, and then came out of it and the keys weren't working again... :/ At least there's a work around. I suspect, that this is something that an automated app could handle if Shabby or someone else doesn't come up with a permanent fix.
V/R
BlackWolf
Can someone update the links??.....
Fixed
JUSMEJOSE said:
Can someone update the links??.....
Click to expand...
Click to collapse
Links are all working now. There was only one broken one that I'm aware of. Let me know if there are others.
BlackWolf
Any update on getting the stock recovery? I blew through rooting my Exhilarate before I noticed the request for help or I would have offered.
The root seems to be working OK for me. JuiceDefender is working great with it to throttle the CPU clock speeds and has really improved my battery life. Also worked OK in blocking all the bloatware apps with the Gemini App Manager. So I don't really have a reason to unroot and go back to stock firmware, but it would be nice to have the option available should I ever hit a problem.
Thanks for all you guys hard work!
DK
I just needed this tutorial!, Good job.
Thanks!
Dream_Killer said:
Any update on getting the stock recovery? I blew through rooting my Exhilarate before I noticed the request for help or I would have offered.
The root seems to be working OK for me. JuiceDefender is working great with it to throttle the CPU clock speeds and has really improved my battery life. Also worked OK in blocking all the bloatware apps with the Gemini App Manager. So I don't really have a reason to unroot and go back to stock firmware, but it would be nice to have the option available should I ever hit a problem.
Thanks for all you guys hard work!
DK
Click to expand...
Click to collapse
domobile said:
I just needed this tutorial!, Good job.
Thanks!
Click to expand...
Click to collapse
Dream_Killer: No, we have not gotten a stock recovery. I've had several inquiries into it, but so far as I know, Shabby has not been able to help out in this regard. I am willing to try myself, but I'll need an un-rooted (and it must never have been rooted) phone.
domobile: Glad it worked for you.
V/R
BlackWolf
Black-wolf said:
Dream_Killer: No, we have not gotten a stock recovery. I've had several inquiries into it, but so far as I know, Shabby has not been able to help out in this regard. I am willing to try myself, but I'll need an un-rooted (and it must never have been rooted) phone.
domobile: Glad it worked for you.
V/R
BlackWolf
Click to expand...
Click to collapse
To get into stock recovery you...
1. open a command terminal on your computer.
2. type cd (where ever you have your ADB located on your computer) for example my is located in desktop/platform-tools so the command would be "cd desktop/platform-tools"
3. type "adb"
4. type "adb reboot recovery"
Presto you are in stock recovery.
ChefAnt said:
To get into stock recovery you...
1. open a command terminal on your computer.
2. type cd (where ever you have your ADB located on your computer) for example my is located in desktop/platform-tools so the command would be "cd desktop/platform-tools"
3. type "adb"
4. type "adb reboot recovery"
Presto you are in stock recovery.
Click to expand...
Click to collapse
We know how to boot into the stock recovery. What we need is to pull the stock recovery image off of the phone so that we can restore the phone to stock.
Btw.. pressing both volume keys while turning on the phone will get you there also.
I rooted the exhilarate. Loaded the t mobile blaze cm7 rom. And all works like a charm. The only thing is you can't make a call. You can,you just can't hear. I called my other phone and it went through. The speaker doesn't work. Mms and all works. Just not the speaker...... why? This wud. Be a awsome rom for this phone.. think we can find a fix?
harley1rocker said:
I rooted the exhilarate. Loaded the t mobile blaze cm7 rom. And all works like a charm. The only thing is you can't make a call. You can,you just can't hear. I called my other phone and it went through. The speaker doesn't work. Mms and all works. Just not the speaker...... why? This wud. Be a awsome rom for this phone.. think we can find a fix?
Click to expand...
Click to collapse
I'm not exactly sure but it might be just as simple as replacing the audio libs on the blaze rom with the ones from the exhilarate. I'm not sure which files though.
I'm curious if by coming together (blaze and exhilarate users) if there would be enough interest to get official cm support. if the only major diff is audio they could basically support 2 devices for the price of one.
Sent from my SAMSUNG-SGH-I577 using xda premium
If i knew/or had the kno how,shoot id do it. Is there a program u need to change the libs?. This is a pretty sweet device.
i think you just need root explorer, and copy the new ones over the old ones. I'll look to see if i can find out which files need swapped. Should be able to make a zip to flash through CWM recovery.
Sent from my SAMSUNG-SGH-I577 using xda premium
Man,im good at alotta things,buildin houses,workin on diesels,and flashin roms to my s3 and note,what i cant figure out is building roms. Im sure gettin this speaker workin has somthin 2 do with dismantling blaze cm7 rom and find the fix.
Another words,im good,but not that good. If som1 held my hand thru it,i cud do it. Or just show me
NFC for Exhilarate!
All: rodracruz found a thread for enabling NFC on AT&T phones. Apparently, the Samsung Exhilarate does have NFC - but why the hell AT&T has it disabled, I have not idea... In any case, check out this thread and follow the instructions to enable it on your phone: http://forum.xda-developers.com/showthread.php?t=1545751
There are even links as to some of the things you can do with NFC.
V/R
BlackWolf
Black-wolf said:
All: rodracruz found a thread for enabling NFC on AT&T phones. Apparently, the Samsung Exhilarate does have NFC - but why the hell AT&T has it disabled, I have not idea... In any case, check out this thread and follow the instructions to enable it on your phone: http://forum.xda-developers.com/showthread.php?t=1545751
There are even links as to some of the things you can do with NFC.
V/R
BlackWolf
Click to expand...
Click to collapse
Sweet, I was wondering, especially since this phone was released after the skyrocket.
Wolfman
Worked beautifully. You the man!
Thx
j3r3goss said:
I'm not exactly sure but it might be just as simple as replacing the audio libs on the blaze rom with the ones from the exhilarate. I'm not sure which files though.
I'm curious if by coming together (blaze and exhilarate users) if there would be enough interest to get official cm support. if the only major diff is audio they could basically support 2 devices for the price of one.
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
I'm pretty sure it wouldn't have anything to do with the audio lib files. More so most likely a kernel, modem, or APN problem.
Edit: not to mention the build.prop is completely written for the blaze. I'm working on some things. I'll let you guys know tonight. I wish there was source for this damn phone.
ChefAnt: There is a stock file from Samsung... read my post (about 2/3 of the way down):
http://forum.xda-developers.com/showthread.php?t=1828426
ChefAnt said:
I'm pretty sure it wouldn't have anything to do with the audio lib files. More so most likely a kernel, modem, or APN problem.
Edit: not to mention the build.prop is completely written for the blaze. I'm working on some things. I'll let you guys know tonight. I wish there was source for this damn phone.
Click to expand...
Click to collapse
I performed root of my stock Froyo Infuse using Superoneclick.
I did NOT remove or unmount the SD card prior to doing this (it was not mentioned in the instructions I followed on another site).
The phone was successfully rooted. I see no problems evident in behavior of the phone.
I am contemplating flashing a ROM at some time in the future (after more studying of the qkster's "how-to").
Will this previous error cause me any problems?
Is there anything I should do to fix it before I proceed?
Thanks in advance.
You appear to have done everything correctly so you are safe to continue. When it says not having the sdcard connected it refers to your internal sd card, which cannot be mounted to the pc when running SOC.
What ROM you plan on flashing sir? That way I may be able to make the process simpler for you.
Sent from my sweet & buttery Infuse
Thanks. AEON is my objective.
Very well, then you just only need to install cwm so you can flash the rom.
follow method 1 of this:
http://forum.xda-developers.com/showthread.php?p=14376440
Be sure to first install the 3e modded recovery using an root explorer such as solid explorer or es file explorer, both free.
Sent from my sweet & buttery Infuse
andros11 said:
Very well, then you just only need to install cwm so you can flash the rom.
follow method 1 of this:
http://forum.xda-developers.com/showthread.php?p=14376440
Be sure to first install the 3e modded recovery using an root explorer such as solid explorer or es file explorer, both free.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
Or...since he's rooted download aeon, then download one of entropys DD kernels (any one...its only for cwm and the kernel will be replaced by aeon)
Then go to the playstore and search "sgs kernel flasher"
Flash entropys kernel that you downloaded
After reboot (may boot loop don't worry) boot into recovery by holding both volume keys and power simutaniously until your phone reboots and you see Samsung logo...when you see the Samsung logo release the buttons
Wipe data/factory reset
Wipe cache
Wipe dalvic cache (under advanced)
Install zip from sdcard
Choose aeon
Choose yes
Wait
When done reboot
Sent from my HTC Holiday using Tapatalk 2
promissa reGeneo
mg2195 said:
Or...since he's rooted download aeon, then download one of entropys DD kernels (any one...its only for cwm and the kernel will be replaced by aeon)
Then go to the playstore and search "sgs kernel flasher"
Flash entropys kernel that you downloaded
After reboot (may boot loop don't worry) boot into recovery by holding both volume keys and power simutaniously until your phone reboots and you see Samsung logo...when you see the Samsung logo release the buttons
Wipe data/factory reset
Wipe cache
Wipe dalvic cache (under advanced)
Install zip from sdcard
Choose aeon
Choose yes
Wait
When done reboot
Sent from my HTC Holiday using Tapatalk 2
Click to expand...
Click to collapse
I want to follow roughly mg2195’s path suggested above.
I did download SGS.
As a side-trip, I used SGS to install some Froyo-compatible custom Kernels (Infusion 2.0, Infusion 1.8, Defused 1.4).
I now have Defused 1.4 Kernal along with my stock Froyo ROM
I used Root explorer to put the modified recovery file in.
I rebooted several times and used the three-finger press, and now I reach the RED screen:
ClockwordModRecovery v2.5.1.3. But I didn't do anything at that screen yet other than exit.
I have two questions before I proceed;
QUESTION 1 – Can I skip entropy’s DD kernal since I already have CWM red?
QUESTION 2 – I want to verify the modified recovery file that I used is correct:
I use the one suggested in this Infuse video:
http://www.youtube.com/watch?v=Y09p-J_g_Rg
the video links to file
http://llamalord.com/youtube/downloads/3e_recovery_no_sig_check.zip
When I googled that file name 3e_recovery_no_sig_check.zip to double-check, it lead me to this thread for CAPTIVATE:
http://forum.xda-developers.com/showthread.php?t=909213
GTG has a different thread “100% working ClockworkMod Recovery for Infuse 4G” which has a zip file with a different name (recovery-clockwork-2.5.1.2-infuse.zip)
http://forum.xda-developers.com/showthread.php?t=1107881
That 2.5.1.2 is not quite the same version number that I see on my red screen (my red screen says 2.5.1.3) . And on top of that, GTG made some comments on page 1 and 2 of that thread which I didn’t fully understand but lead me to believe Captivate is not a match (so he used i90000 instead). All of this makes me wonder if I have the right CWM red in there.
QUESTION 2 SUMMARY: Do you think my CWM red is good, or do I need to start all over again with GTG’s file?
Additional info found later;
I did find the same file 3e_recovery_no_sig_check.zip that I installed here on xda forums in an Infuse thread by h8rift: http://forum.xda-developers.com/showthread.php?t=1091465 . I downloaded it and verified the zip filename and size is identical to the one I used. That makes me feel a little better about question 2.
Although I've been studying these things, I'm still confused about the next step (trying to figure Q1 answer myself). Maybe if I can understand better, then I can answer myself. The following questions are an attempt to improve my understanding:
Q3 - Does getting the red CWM menu mean my CWM is successfully installed the way it needs to be ready to flash a rom ? (I’d think it does, but not sure).
Q4 - I see the GTG thread was same one linked by andros11. I am totally confused about that thread. Method 1, Step 1 you take a zip (which zip... your ROM or the one linked on the message?) and you rename it update.zip and put it on your sd card (where on your sd card... surely it makes a difference?). And this accomplishes something different than putting the modified file named recovery file into root/system/bin/recovery using root explorer?
Q5 – the only purpose of mg2195’s recommendation to download entropy’s kernal was to get the modified CWM, right?
Thanks for your patience.
========================
I think I will go ahead and flash Entropy's daily driver, should make all my questions irrelevant.
I'll post results, fingers crossed that it'll be a proclamation of victory.
In the meantime, I'm still curious about above, especially question #4.
==================
Edited again - actually I am going to sleep on it for a few days and make sure this is what I want to do.
electricpete1 said:
Although I've been studying these things, I'm still confused about the next step (trying to figure Q1 answer myself). Maybe if I can understand better, then I can answer myself. The following questions are an attempt to improve my understanding:
Q3 - Does getting the red CWM menu mean my CWM is successfully installed the way it needs to be ready to flash a rom ? (I’d think it does, but not sure).
Q4 - I see the GTG thread was same one linked by andros11. I am totally confused about that thread. Method 1, Step 1 you take a zip (which zip... your ROM or the one linked on the message?) and you rename it update.zip and put it on your sd card (where on your sd card... surely it makes a difference?). And this accomplishes something different than putting the modified file named recovery file into root/system/bin/recovery using root explorer?
Q5 – the only purpose of mg2195’s recommendation to download entropy’s kernal was to get the modified CWM, right?
Thanks for your patience.
========================
I think I will go ahead and flash Entropy's daily driver, should make all my questions irrelevant.
I'll post results, fingers crossed that it'll be a proclamation of victory.
In the meantime, I'm still curious about above, especially question #4.
==================
Edited again - actually I am going to sleep on it for a few days and make sure this is what I want to do.
Click to expand...
Click to collapse
Since you already managed to get Cwm red, you have no need of using the 3e modded recovery. That would only allow you to flash the zip linked in the OP of the gtg thread, which should be placed on the root of your /sdcard.
Entropy's dd mg2195 suggested would replace your kernel with a Gingerbread one that included cwm.
I would say to go ahead and flash Aeon since you already have CWM.
Sent from my sweet & buttery Infuse