Hi all,
can anyone successfully pair with Bluetooth headset Nokia BH-101?
Any hints/advices?
P.S. Long press (no PIN) helped! :-/
yup, some of the STEREO type of headsets does not require the 0000 or 1234 pin to pair
i find it, that only the MONO phone only headsets needs the 0000
To pair the Nokia BH-101 headset to any phone:
1. Ensure that your phone is switched on and the headset is switched off.
2. Press and hold the multifunction key (for about 8 seconds) until the green indicator light starts to flash quickly.
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.
4. Select the headset from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.
If the pairing is successful, the headset appears in the phone menu where you can view the currently paired Bluetooth devices.
Related
I have a Skypower bluetooth clip on headset and also a Sony Ericsson HBH-65 headset. Both work fine for pick up/cancel calls when using the xda2 with nothing installed. Because I have a Holux bluetooth gps, I needed to install the fantastic blutooth tools program which made the gps operate flawlessly, however if I now discover and pair either headset neither will work. They both bring up bluetooth tools, I have only one installed at any one time, I install as headset and everything seems fine but when making/receiving calls with headset mode activated, the headset does nothing, the calles arent routed to the headset, its as if the headset doesnt exist. Anybody have a suggestion please :?:
I have now reverted to pocket bluetooth tools 1005 and everything working normally again. If anybodt else has this problem please let me know if you managed to solve it as I prefer the latest bluetooth tools.
The only problem i found with the new bluetooth tools is that you have to click on the 'bluetooth headset is enabled' in the profile menu which you really need to keep on the today screen all the time, i found i just tap the bluetooth icon in the bluetooth tools menu, then tap on the enable in the profile menu and i can the make and end and answer calls using the button on the headset, when making calls you can only dial either the number you just typed in, or the last number dialled
Bluetooth tools e Qtek 2020
Where can I find 'bluetooth headset is enabled' ?
Thank you,
Click Start, Settings, Today, then the items tab. Put a tick in the "profile" box.
Cheers
I am using I-tech clip radio it support A2DP, AVRC with buit in FM radio receiver and sound quality is great.
But i am facing a problem -
My Wizard detects it as 1.Wireless Stereo and 2.hands free
After paring it plays music and handle call very well
Once i switch off BT on phone then again switch on to reconnect it connects only Hands Free part not Wireless Stereo - so music doesn't come on Hands free
If i start A2DP from Battery Status it transfers music but very poor sound quality and AVRC function.
I even tried Widcomm BT Stack but no help.
So after every switch on/off of BT i have to delete and pair it again with my phone.
Please help
I have same problem
rom TNT 273
genius bt-03i
sometimes it hepls when I turn my headphones off and on again and at bluetooth devices I tap and hold stylus on my phones and click set as wireless stereo, sometimes I have to unpair and pair again...
Solved
If i follow these steps it works -
OFF
1. switch off BT on phone
2. Switch off Handsfree
ON
3. Switch on Handsfree
4. Switch on BT on Phone in Connectable mode
5. After few seconds in BT config panel select & hold on listed handsfree set as wireless stereo
This process works very well
in my BT panel "Set as wireless stereo" stays grey after this procedure :-(
running tnt series pro on a g3 and trying to connect Jabra BT-320s
i put the headset into pairing mode and I am able to find the headset but dont have any way to connect to the headset it just sits as a device in the bluetooth settings.
i assumed it would bring a msg to connect to the device but it didnt.
am i doing something wrong?
I currently have a program called cicleBT that turns BT on and off with the push of a button (without having to navigate thru to the comm manager)...
Would it be hard to make a program that did this and then once bluetooth was on it would automatically make my first BT device "set as wireless stereo"??
i find it a pain that everytime i want to hook up my stereo headphones i have to go into the bluetooth settings and set it as wireless stereo after turning on device visible to other devices...
What would i need to be able to do to do this?
thanks
This isn't the software your asking for, but once your headphones have established the headset link, try pressing the play button on them. Works on all bluetooth headphones I've used.
Hello,
I just got the mw600 headset and when trying to pair with my Desire (CM 6.0.2)
1. Pairing, i put the mw600 in fresh pairing mode (reseted)
2. Phone finds mw600 and I try to pair
3. I get a beep and the mw600 goes to "sleep"
4. Phone stays "unpaired" but the headset is paired
5. I press "phone button" on mw600, I get a pair request on the phone
6. I press "Pair" and all I get is a beep in the headset (=ok) but I don't get any
pin-input dialog and the mw600 is still unpaired in the phone.
I think the problem is that the headset thinks it is paired but the phone does not. So when I press the "Pair" in the "Paring" dialog it "shuts down".. But it's just a guess..
Anyone know how to fix? Is it possible to edit the bt paring configuration/db to
make it work?
Cheers, Rkthkr
I can confirm that the headset works in HTC Desire stock ROM 2.2.