Related
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
cyanogen said:
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Click to expand...
Click to collapse
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance (howto).
INSTRUCTIONS:
- First time flashing CM 7 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery (Unrevoked method is recommended).
2. Do a Nandroid backup!
3. Update your radio! New radio from HTC 2.2+ roms is required (Desire Radio Thread).
4. WIPE (wipe data/factory reset + wipe cache partition)
5. Install the ROM
6. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Go into recovery and dump the "/proc/last_kmsg" file.
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get send the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
This is the latest release candidate so any and all feedback is appreciated!
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Latest version: 7.0.3-Desire - 06/05/2011
Download: update-cm-7.0.3-Desire-signed.zip
Also available for download via ROM Manager
MD5Sum: bb8145548867e2bc6b463d3803f99175
cyanogen said:
The 7.0.3 update is *ONLY* for people using 7.0.2* stable builds. You'll hose your system if you install it on a nightly from the last week (2.3.4/GRJ22).
Click to expand...
Click to collapse
Google Addon: 20110307 Universal
Download: http://goo-inside.me/google-apps/
Battery drain issue:
Set wifi sleep policy to never
settings -> wireless & networks -> wifi settings
press menu -> advanced and set wifi sleep policy to Never
press menu -> save
CM7 HBOOT by Alpharev | xda thread
Change partition table size 130/5/302 (system/cache/size)
Require nightly #18 or newer
Upgrade instruction:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl-cm7.img'
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything, advanced restore system & data, install CM7 again (same version or a newer one).
Legacy App2SD:
Simple2Ext (Easy with a GUI)
CM7 Legacy App2SD Addon Script (For Advanced user, Command Line)
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
WOW great RC1 !!!
is the MMS issue already fixxed in this release?
thc ahead guys !!!!
dkm111
Awesome news! Flashing...
Thanks and keep up the good work!
finally rc1 - a lot of work in it...
great I will try it right now!
mad-murdock said:
finally rc1 - a lot of work in it...
Click to expand...
Click to collapse
hey how about a simpler changelog specific for desire ... like what works and what doesnt work of the essential hardware.....
eg: notification light works, camera doesnt work, proximity sensor works.....
stuff like that
hispeedworm said:
hey how about a simpler changelog specific for desire ... like what works and what doesnt work of the essential hardware.....
eg: notification light works, camera doesnt work, proximity sensor works.....
stuff like that
Click to expand...
Click to collapse
Yeah, that would be cool!
excellent! Great job guys! flashed up perfectly!
but I tried a reboot and I'm stuck on the boot screen/freezes and goes again lol. will restore backup and try again I guess
have been waiting for this, thanx
Finally
Roscopcoletrain said:
excellent! Great job guys! flashed up perfectly!
but I tried a reboot and I'm stuck on the boot screen/freezes and goes again lol. will restore backup and try again I guess
Click to expand...
Click to collapse
tried a 2nd time, and success rebooted just in case and all is well. Great job again folks!
hispeedworm said:
hey how about a simpler changelog specific for desire ... like what works and what doesnt work of the essential hardware.....
eg: notification light works, camera doesnt work, proximity sensor works.....
stuff like that
Click to expand...
Click to collapse
Short and simple:
what (should) work: everything but hd recording
What doesn't work: hopefully nothing
At least that's the experience from nightlies
Swyped with cyanogenmod 7 powered HTC Desire HD. Excuse typos
damn net is downloading it damn slow. grrr~~~
Great to see RC cyanogen rocks. Let me flash it today
LuffyPSP said:
damn net is downloading it damn slow. grrr~~~
Click to expand...
Click to collapse
You are probably not the only one downloading cm got huge network capabilities, but even those are used up when enough users download
Swyped with cyanogenmod 7 powered HTC Desire HD. Excuse typos.
Just about to give this a shot. Upgrading from the nightly build #23.
hey, any idea why my charging led turns green after it being in 90%? Anyone experiencing this problem as well?
RC1 is amazing no more launcher laggy issue, smoother than every other builds
just one thing , the time display on toolbar ,still no fix,it shows always 12hrs format 3:00 in the morning shows just 3:00 ,and 24hrs format just does'nt work ,always the same...hmm ,but no biggy
thank your great efforts and hard work
ParagonDevil said:
hey, any idea why my charging led turns green after it being in 90%? Anyone experiencing this problem as well?
Click to expand...
Click to collapse
Thats normal! When it hits 90 percent it turns green
Sent from my HTC Desire using XDA App
i read somewhere we need the new Clockworkmod for this?
is this true? because your installation post mentions nothing of it...
CM10 for Motorola Milestone 2
[ Downloads | Google apps ]
Changelog
11.08.2012 - Initial release based on Quarx2k's, Epsylon3's and Nadlabak's brilliant work.
12.08.2012 - Fixed mobile data, added initial value for keypad type, support for GB kernel.
19.08.2012 - Common builds for Froyo and GB kernels (verified on UK Froyo and CH GB), keylayouts from alexc804's CM9. CM team implemented some more Trebuchet settings.
22.08.2012 - Fix bootmenu overclock, fix compass, CM10 bootanimation, reduced heapsize, drop support for Froyo kernels, clean up proprietary files.
23.08.2012 - OTA updates via otaupdatecenter.pro app
25.08.2012 - Preserve baseband during updates, fix crashing Hostapd (thx stargo!), plug OTA updater into Settings->Additional system updates
28.08.2012 - Fixed audio in car dock (thx to Nadlabak)
29.08.2012 - Fixed WiFi tethering (thx to stargo)
30.08.2012 - Fixed WiFi channels > 12
01.09.2012 - Use native JB keyboard layout switching (Settings -> Language & input -> Physical keyboard). Added battd compatibility for Froyo kernels (I still recommend using GB kernels as the only supported ones).
03.09.2012 - Fixed audio in video recording, stereo audio enabled, decreased FPS in video preview (Quarx2k)
04.09.2012 - Fixed compass, improved video perfomance (nadlabak), updated SGX libs (Quarx2k), fixes for qwertz layout
08.09.2012 - Added baseband selection, modified currency symbols in keyboard layouts, proprietary files used from UK 2.3.4, updated OTA Updater
10.09.2012 - Added US and UK QWERTY variants, alternative chars at ALT+SHIFT.
12.09.2012 - Hopefully fixed data connection problems (thanks to SlugZero)
17.09.2012 - Corrected azerty layout, corrected charging LEDs, new touch screen driver (thx M1cha) + multitouch fix, torch LED while focusing (thx paalsteek), call recording enabled libaudio
22.09.2012 - Key next to ALT mapped as CTRL (useful for keyboard layout switching), final fix for torch light while focusing, reverted preview FPS limit to improve audio stability during video recording
23.09.2012 - Corrected superuser, added hebrew (thx to Skyfox1) and polish keyboard layouts
29.09.2012 - Fixed portuguese time format (thx to Snowraptor)
09.10.2012 - Custom kernel (thx to Czechop) - consider this build as unstable/experimental. Boot reason is broken - OTA update won't boot into recovery, you need to enter recovery manually (volume down while booting).
13.10.2012 - Android 4.1.2, CRT animation, live wallpapers (2nd-init build)
27.10.2012 - Fix boot reason, fix charge only mode, fix low performance after boot, kernel optimizations, JB interactive governor, power hal (need interactive governor to work properly), fix overclock (thx to SkrilaxCZ, Nadlabak and Quarx2k)
03.11.2012 - Fixed battery usage and CPU frequency stats, added more Live Wallpapers, new CM File Manager (read this)
10.11.2012 - Fixes for 2ndboot, 10MB more of free RAM (thx to Nadlabak)
28.12.2012 - Fixed CM File Manager
Hints & issues
lgCamera works better with video recording
Currently wipe data and cache in OTA updater does not work
CM10 does not contain Car home, you need to install it manually (search for google car home)
Installation guide for stock roms users
1) Root your phone (you may use SuperOneClick root method)
2) Install Droid2 Bootstrap Recovery
3) Open Droid2 Bootstrap Recovery and tap "Bootstrap Recovery", then "Reboot Recovery" granting root privileges. The phone should reboot into recovery. Use volume buttons to navigate, camera button to accept, power button to go back. You will install files by selecting "Install zip from sdcard".
4) Optionally: create a backup of your data
5) Install latest CM ROM image file.
6) Optionally: install Google Apps
7) Select "Wipe data/factory reset"
8) Reboot and enjoy
9) Optionally: select baseband version corresponding to your country and BPSW version
Installation guide for CMx roms users
1) Optionally: create a backup of your data
2) Install latest CM ROM image file.
3) Optionally: install Google Apps
4) Wipe data and cache partition
5) Reboot and enjoy
6) Optionally: select baseband version corresponding to your country and BPSW version
Installing updates
The most convenient way of installing updates is through built-in OTA updater. Note that currently wipe options do not work there, so you may need to do it manually in recovery. For most cases that won't be necessary though.
Sources
repo init -u git://github.com/tezet/android.git -b jellybean
Donations
If you like and appreciate my work, and you may donate here (now in English).
I do not provide support by PM nor e-mail. Please ask questions here.
Waiting for more information about the ROM CM10, and hoping someone is available to test??
camera, wifi, scanner, etc!
BEAUTIFUL WORK! thank you!
how about upgrading from Cm9 by sfc3001 ? does it work ?
WHOA! This is as awesome as unexpected! Thanks a million Tezet, gonna try it asap *-*
Thank you very much for your work..!
Waiting for the GB based Kernel..!!
harisit2005 said:
how about upgrading from Cm9 by sfc3001 ? does it work ?
Click to expand...
Click to collapse
If you have CH version, you may give it a try. Install my CM7 first and then CM10 and gapps. It should work in theory, but I don't have a clue if gapps are upgradable between these versions. Do a nandroid backup first if anything goes wrong
Thank you very much Tezet! You brought life back again to out Milestones 2!
I want to try it but Gapps web isn't working for me at the moment. Seems ive got to use the gapps for jb 20120726. I aren't that old.
so Tezet comes back with a bang!!
Waiting for the GB kernel based release.
Latest gapps mirror:
http://www.multiupload.nl/7D297URVOS
tezet said:
Latest gapps mirror:
http://www.multiupload.nl/7D297URVOS
Click to expand...
Click to collapse
Thks! :angel:
thanks a lot
i'm waiting for gb based =D and thanks again for this surprise =)
one question, wich bugs have this version??
There are no known bugs/limitations other than mentioned on the first post (so far).
sahilarora911 said:
so Tezet comes back with a bang!!
Waiting for the GB kernel based release.
Click to expand...
Click to collapse
Amin to that!
Good to have you back tezet
Sent from my MotoA953
Installed it already. Coming from CM7.
Tezet, is project butter working?
I cannot get signal. Installed MS2 baseband and choosed mine (live in Argentina) but no result!
Is it supposed to go with european or chinese kernel?
I completely lost mobile network signal and cannot restore it even after following the guidelines in here
http://forum.xda-developers.com/showthread.php?t=1182050
any help would be welcome please
algarues said:
Is it supposed to go with european or chinese kernel?
I completely lost mobile network signal and cannot restore it even after following the guidelines in here
http://forum.xda-developers.com/showthread.php?t=1182050
any help would be welcome please
Click to expand...
Click to collapse
None of them. Any Froyo kernel should be fine, I use it with UK Froyo kernel (the one from CM7 build).
tezet said:
There are no known bugs/limitations other than mentioned on the first post (so far).
Click to expand...
Click to collapse
wow
i'll try just right now =D =D
thanks a lot tezet
u re the best =D
noastick said:
Installed it already. Coming from CM7.
Tezet, is project butter working?
I cannot get signal. Installed MS2 baseband and choosed mine (live in Argentina) but no result!
Click to expand...
Click to collapse
I haven't looked deeply into it, but I suppose it is.
If someone figures out how to gain signal, i would appreciate it! I cannot get it to work :S
Just updated and tested it for a bit... it is really smooth =)
Everything worked fine... except gsm =/, but probably because I have the wrong kernel? I come from sfc3001 cm9 (CM9-NIGHTLY-120721-milestone2-ch.zip).
Im going back to my backup from cm9 until I'm able to use the phone as a phone on cm10.
But that was a awesome job =) :good:
Android 4.2.2 Jellybean for Defy and Defy+
Mirrors: http://www.uncledan.it/android-files/CM10.1/
Gapps: http://goo.im/gapps
Experimental builds with 3.0.8 kernel:
Not for daily usage!
Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/!!!experimental!!!/
Works: SD-Card, Bluetooth, Torch, Leds, USB all modes, HW Video decoding, Sensors, FM-Radio (only seek stations+RDS), Sound (only speaker).
Not work: Headset, BT-headset, FM-Radio sound, Phone, GPS, Camera, FM-TX, WiFi.
Known problems: Low speed of USB Mass-storage, Display not always wake after sleep, Suspend not work correctly.
Builds on stable 2.6.32 kernel:
Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/
Mirror: http://d-h.st/users/Quarx/?fld_id=14052#files
Problems/TODO:
1. BT-headset has problems.
2 .BT will not work, if FM is enabled.
3. Video recording is not good.
4. Memory leak after some days.
5. Delay on wakeup.
09.04.13: Suspend optimizations.
13.04.13: Fix BT, add Volume Rocker Wake Support and Expanded Desktop preference. 5Ghz WiFi (not tested)
15.04.13: Fix FM-Radio, Add pie controls, TWRP recovery..
11.05.13 Updated USB-Gadget to native for 4.x, fix mtp/ptp/storage/tethering. Removed usb.apk/usbd. Many minor fixes..
16.05.13 Very experimental build, contain a lot of updates from kernels 2.6.33 - 3.1. Increased performance, added swap. Memory management updated to 2.6.39(3.0) state. Some parts updated to 3.1. Blechd0se patches for interactive gov.
07.06.13 Fix 2g/3g data (thanks to Kayant for finding the right way to resolve problem). More safe mount options (should fix problems of random bootloops). Fix Google Messaging service (thanks to ccav2000)
16.06.13 Updated wifi driver & wpa_supplicant, fix bt-tether by @dh.harald. Improvement in interactive governor by @Blechd0se. Updated kernel with some patches from upstream.
09.07.13 Stability fixes. Updated bootmenu. This build not contain ZCache/Zram/Swap. Who want use ZRAM and other experimental features, can install @Blechd0se's kernel
F.A.Q
Coming from CM 10
Do we need to wipe data to update the CM10 build to CM10.1?
Edit: I will try it, btw. thanks Quarx for the awesome work
GUYS u must flash gapps , if u want to go past the setup during first boot
Fire Head said:
Do we need to wipe data to update the CM10 build to CM10.1?
Click to expand...
Click to collapse
Remember that it's not ready for daily use. Nearly everything doesn't work. You have to wipe everything in order to make it boot. And of course, flash gapps too.
how to get pass , the first boot setup ,
the gapps provided is too large for defy's data partition
so cant get specific needed files for setup , can any1 help ??
i still cant get pass the setup
Quarx, I recommend you to post this link to the OP:
FAQ thread for the new CM10.1!
http://forum.xda-developers.com/showthread.php?p=34616788
----
Guys, remember to hit the "newsworthy thread" button on the OP! The world needs to know this!
Okay, the excitement is understandable, but guys, can you keep this thread CLEAN? Express your gratitude with a donation and the Thanks button, not by flooding the thread with delighted squeals. It's development after all.
I hope (in vain though) that this will be the last offtopic post.
Trimis de pe ASUS Transformer Pad TF300T
So for me, after PIN input, it shows "Unfortunately, the process com.google.process.gapps has stopped" and then "Unfortunately, Setup Wizard has stopped" message... and it stays like that even after i press OK! I can access notification bar, but no start screen!
What to do?
Gafanhotz said:
You have to wipe everything in order to make it boot.
Click to expand...
Click to collapse
Not really, installed it over CM10 (with the new GApps) and deleted cache (and dalvik cache). It works
Fire Head said:
Not really, installed it over CM10 and delete cache (and dalvik cache). It works
Click to expand...
Click to collapse
He said on Facebook to wipe data in order to make it work without major problems.
bone101 said:
No Sdcard here
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
That should be in his to do list don't worry. This is something beyond imaginary what we are going to experience. So thank him for what we have. You know about him. He will surely make it stable.
Sent from my MB526 using xda premium
Gafanhotz said:
Quarx, I recommend you to post this link to the OP:
FAQ thread for the new CM10.1!
http://forum.xda-developers.com/showthread.php?p=34616788
----
Guys, remember to hit the "newsworthy thread" button on the OP! The world needs to know this!
Click to expand...
Click to collapse
Can't find that button..maybe it is not available in tapatalk but only in Web visualization?
Hope this thread will be cleaner than 4.1.2 one..guys for support please use faq thread!
System Wizard stopped fixed
After installing CM10.1 with gapps you can't bypass Setup Wizard stopped. How bypass this error: 1.wipe all data 2.install CM10.1 nightly 3.Wipe all data 4.boot in 4.2, it will boot without errors. 5.Install your needed google apps from market. Error caused by gapps (I think its because low space in ROM - installing CM10.1 without gapps i getted only about 15mb free), so if we want to use future ROMS (4.3 - CM11 or CM10.3) we need to resize SystemROM, to resize SROM - we need unlock bootloader, to bypass bl - TI Board Conf tool & 16MB.bin or some future way )
can i install for Defy green lans ??
slon11 said:
can i install for Defy green lans ??
Click to expand...
Click to collapse
Its for Defy and Defy +.
Since we have custom kernel, every build is for both phones, regardless the lenses
Sent from my Balls of Steel
Can someone make audiofix flashable from cwm as temporary solution ? Beside this rom speed is very good
Audio fix CWM flashable ZIP
I made CWM flashable audio fix.
turffe said:
I made CWM flashable audio fix.
Click to expand...
Click to collapse
Yes thanks a lot,but how to mount sdcard to save download from Tapatalk ?
sebx_g1 said:
Yes thanks a lot,but how to mount sdcard to save download from Tapatalk ?
Click to expand...
Click to collapse
SD is mounted, but android is not seeing it as mounted.
Nothing you can do about it..
Sent from my Balls of Steel
I see there's this new CM11 going, and thanks to @Hashcode who solved most of the complex problems already, here's my first stab at CM11 on our Nook HDs that installs into internal memory (EMMC).
The install is a lot similar to how it was done in CM10.2 days, but you will need a new recovery image (and a new sdcard image for those doing initial install):
So, For Nook HD+: Initial ovation sdcard image (cwm) | ovation recovery image (CWM)
For Nook HD: hummingbird Initial sdcard image | hummingbird recovery image (CWM)
I did some light testing and things seems to be working for whatever light loads I came up with, but still there are probably tons of problems that I have not yet noticed. Please write in the comments about what's broken and I'll try to fix it. Once it's good enough, I'll try to get official nightlies going for CM11 as well, I guess.
Latest CM11 EMMC images are now available as CM11 nightlies at:
For Nook HD+ get ovation builds
For Nook HD get hummingbird builds
There also might be experimental builds available referenced below in the history section.
(Also for completeness, For Nook HD+ sdcard image cm-11-20141129-UNOFFICIAL-ovation-sdcard.zip, | initial sdcard image for ovation )
For new Installs:
Download the initial sdcard image
ungzip and write to sdcard using dd (winimage or whatever for those stuck on Windows)
Instert the card into your nook and reboot
Flash the recovery image
Flash cm11 image
Flash whatever other extra things you need like gapps
remove the sdcard
reboot the nook
For upgrades from CM10.x (the only tested are 10.2 and 10.1). If you have any problems after upgrade - you'll need to do factory reset to clear /data:
Download recovery zip and CM11 install and place it on the nook
Reboot into recovery you already have installed
Flash the recovery zip you just downloaded
reboot into recovery again (This is important! Failure to do this will botch your upgrade and you'll need to wipe /data) so that the new recovery is started.
Install CM11, install other stuff you need like gapps
reboot
enjoy
Note: After upgrade you will need to reenter all of your wifi passwords.
Useful apps:
Overall loudness and volume control app: NookHDVolumeAdjuster-1.apk
Touch screen sensitivity control: NookTouchscreenSensitivityAdjuster-4.apk (backup link)
USB host control (usually only needed on official CM builds, as otherwise you can use Quick Settings panel): USBHostSwitcher.apk
Known problems:
- attempting to reformat external sdcard from android crashes volume manager - seems to be upstream problem of some sort. The sdcard is left in some strange state, so don't do it. (if you did, reformat the sdcard on your PC, all data will be lost either way)
Changelog:
2014/11/297 - Bring sdcard build to current source version:
* cm-11-20141129-UNOFFICIAL-ovation-sdcard.zip
2014/08/17 - Bring sdcard build to current source version:
* cm-11-20140817-UNOFFICIAL-ovation-sdcard.zip
2014/01/18 - Fixed 1080p movie playback on Nook HD+:
* cm-11-20140118-UNOFFICIAL-ovation-emmc.zip
* cm-11-20140118-UNOFFICIAL-ovation-sdcard.zip
2014/01/17 - Fixed headset mic issue
* cm-11-20140117-UNOFFICIAL-ovation-emmc.zip
* cm-11-20140117-UNOFFICIAL-hummingbird-emmc.zip
* cm-11-20140117-UNOFFICIAL-ovation-sdcard.zip
2014/01/15 - Switched to TI wpa supplicant, should fix a bunch of wifi-related issues
* cm-11-20140115-UNOFFICIAL-ovation-emmc.zip
* cm-11-20140115-UNOFFICIAL-hummingbird-emmc.zip
* cm-11-20140115-UNOFFICIAL-ovation-sdcard.zip
2014/01/09 - Fixed inability to write to sdcards.
* cm-11-20140110-UNOFFICIAL-ovation-emmc.zip
* cm-11-20140110-UNOFFICIAL-hummingbird-emmc.zip
* cm-11-20140110-UNOFFICIAL-ovation-sdcard.zip
2014/01/08 - Misc updates: autodetect sdcard format, not just vfat. fuzzy touch patch courtesy of D Marble, bt-pan services that reportedly fix bt tethering for some people.
* cm-11-20140109-UNOFFICIAL-ovation-emmc.zip
* cm-11-20140109-UNOFFICIAL-hummingbird-emmc.zip
2014/01/06 - Initial release
* cm-11-20140106-UNOFFICIAL-ovation-emmc.zip
* cm-11-20140106-UNOFFICIAL-hummingbird-emmc.zip
* cm-11-20140106-UNOFFICIAL-ovation-sdcard.zip
The screen kept flickering like a tube light few times.
Thank you! Welcome back
Sent from my BN NookHD+ using xda app-developers app
Welcome back, you've been missed greatly. I kept telling everyone not to panic, you would be back.
Sent from my BN NookHD+ using XDA Premium HD app
Thanks dude. I was hoping you'd start building it. Downloading now!
Working well so far. Thanks for making it and glad to have you back.
for those who need gapps you could see below (Be sure to choose 4.4.2 gapps.)
Link for PA gapps : http://forum.xda-developers.com/showthread.php?t=2397942 <MINI MODULAR PACKAGE 121 MB>download link http://goo.im/devs/paranoidandroid/roms/gapps-mini/pa_gapps-modular-mini-4.4.2-20131230-signed.zip
My personal favorite is BaNK's gapps : http://forum.xda-developers.com/showthread.php?t=2012857 <core gapps only, 17MB>download link http://www.androidfilehost.com/?fid=23269279319195954
Thanks for starting the work again -- I can't wait for official nightlies. And welcome back.
Also, it seems that we have to use CWM. Is there a reason TWRP isn't supported, or is that on the to-do list?
Nice to see this, I've used Bokbokan's eMMC build off his blog with TRIM support by default (MAG2GA ver06 10/2012), and I've used yours with TRIM everything worked great.
Does this build come with TRIM enabled?
Will this be updatable via CM updates in settings?
Thank you for making my tablet a tablet again!
It would be interesting to know if it presents visible differences from CM 10.2 regarding responsiveness, especially with ART enabled. It's the last fort to be conquered with our nooks (trim+art). Sadly my nook is not back yet so any reports would be welcome.
Awesome
Nice to see this, I've used Bokbokan's eMMC build (off his blog) with TRIM support enabled by default (MAG2GA ver06 10/2012), and I've used your CM10.2 with TRIM everything worked great.
Does this build come with TRIM enabled?
Will this be updatable via CM updates in settings?
Thank you for making my tablet a tablet again!
jjjooonnn said:
Nice to see this, I've used Bokbokan's eMMC build (off his blog) with TRIM support enabled by default (MAG2GA ver06 10/2012), and I've used your CM10.2 with TRIM everything worked great.
Does this build come with TRIM enabled?
Will this be updatable via CM updates in settings?
Thank you for making my tablet a tablet again!
Click to expand...
Click to collapse
It should be updatable via the settings once it's an official built. Right now, all of the builds are unofficial ones, so they have to be fully downloaded and flashed.
verygreen is the official device maintainer for CM though, so once he "approves" of the build, it will be built nightly by the CM servers, and then it will be fully integrated into their update mechanism (or CyanDelta if you use that). Just like the 10.2 builds.
TeutonJon78 said:
Also, it seems that we have to use CWM. Is there a reason TWRP isn't supported, or is that on the to-do list?
Click to expand...
Click to collapse
It's on the todo list, but cwm was easier to make at first (as in, next to zero effort)
jjjooonnn said:
Does this build come with TRIM enabled?
Click to expand...
Click to collapse
Yes, this has TRIM-enabled kernel, though I have not decided if I should do it for the official releases.
Have there been any more bricks with the trim-fixed kernels in the past couple of months?
Will this be updatable via CM updates in settings?
Click to expand...
Click to collapse
I guess yes, once there are official nightlies again. But I want to make sure it's at least of adequate quality before enabling that.
Just an advisory: I just flashed this over Succulent's rom with no problems, BUT I lost all my saved wifi profiles and had to reflash gapps. Not any big deal, but to anybody else who plans to do that and isn't coming from CM 10.1/2: be prepared. Relatively painless upgrade, though. Very glad to see TRIM enabled. Don't plan on enabling ART until xposed/gravitybox is compatible. This is much, much smoother than Succulent's build.
Good job!
I can't speak for anyone but didn't see anything from a quick search in the post: TRIM FAQ. I can attest that mine works and I believe it should be one of the bad eMMC (MAG2GA ver06 not ver05).
I did test TRIM (vdc fstrim dotrim) no issues, and found the CM11 under updates (after I updated to CM11) so I can attest to that much!
Thanks for the reply
Darrian said:
Just an advisory: I just flashed this over Succulent's rom with no problems, BUT I lost all my saved wifi profiles and had to reflash gapps. Not any big deal, but to anybody else who plans to do that and isn't coming from CM 10.1/2: be prepared. Relatively painless upgrade, though. Very glad to see TRIM enabled. Don't plan on enabling ART until xposed/gravitybox is compatible. This is much, much smoother than Succulent's build.
Click to expand...
Click to collapse
I would say they are about same smooth. Succulent's build has some nice framework and more option in performance settings. But just from system ui or user experience they are almost the same. Not could I tell the difference in app opening or transition.
Stock launcher Does lag when press the app drawer butter from home screen. But I use Nova launcher to solve the problem.
No find significant performance inprovememt over cm10.2 yet. Maybe Kitkat just does more job in UX polishing rather then performance.
Hopefully we could find some Performance MOD to use in KitKat.
It may very well be due to the fact that I upgraded from CM 10.2 and did not do a clean install, but for me Succulent's build was extremely laggy, many apps froze frequently, and when too many apps (more than like 3) were open it would reboot itself. I have none of those problems with this build, it's super smooth and fast and I haven't had any apps become laggy or crash or reboot my tablet. And this is upgrading from CM 10.2>Succulent's KK>Verygreen's KK; I still haven't done a factory reset and don't plan to unless it becomes necessary later. I use Nova as well. I'm not saying Succulent's build is bad, I thought it was bearable enough to use and was planning on using it long term, updating with each new build until it got to where I thought it should be, but then I installed this build and the difference is staggering. If I reflashed Succulent's build and wiped my data partition I might have a better experience, but now that I have this I don't see any need to.
this is great, glad to see you're back =)
my nook is currently being borrowed, i was wondering if anyone could quickly benchmark it?
thanks
Thank you Verygreen for this new build.
I will try it today.
I have 2 questions about CM11 and Nook HD+ hardware:
- did the HD+ have a bluetooth low energy (BT 4.0) chips?
- did the HD+ have a Low-power audio playback (kitkat new feature) capable chips?
If yes, is it included in this new CM11 build?
Thanks
Edit:
I found that Nook HD+ has wl1271l chip and uses wl12xx driver. That chip is BT 4.0 and BLE. See here http://www.rfm.com/products/data/wls1271l.pdf
But this thread show that BLE isn't activated in CM.
verygreen said:
久しぶりでした
(Also for completeness, For Nook HD+ sdcard image cm-11-20140106-UNOFFICIAL-ovation-sdcard.zip, | initial sdcard image for ovation )
Click to expand...
Click to collapse
Thanks verygreen. Great to see your are back in action.
The SDCARD image link is downloading emmc image. Here is the correct like if any one is looking.
cm-11-20140106-UNOFFICIAL-ovation-sdcard.zip
Code:
Code:
/*
* Your probably long expired warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
* and point my finger right back at you.
*/
Installation Instructions
Make sure you have a second partition on your SD card before flashing!!!! This can be created with minitool partition wizard on Windows or gparted on Linux.
If on a BML rom (stock-based GB)...
0. Read "Things to take note of" below
1. Reboot to recovery
2. Make sure your version of CWM is at least 5.x
3. Install zip. It will reboot a couple of times, don't be worried.
4. If you want root or Gapps, flash them now
If on an MTD rom (CM7 and all ICS+)(I tested CM9, CM10.1 and CM11)...
0. Read "Things to take note of" below
1. Reboot to recovery
2. Wipe data, and cache paritions (just in case). If updating to a newer build, you can probably skip this step
3. Install zip
4. If you want root or Gapps, install them now
The first boot can take several minutes. Be patient. If it takes 10+ minutes, pull the battery and reboot to recovery.
Things to Take Note Of
Humberos (the i9000 maintainer) has moved on to different projects which means no first-gen Galaxy S devices are being actively maintained. Builds may break at any time!
I actually have a T959P, not a T959V... It was released by Telus in Canada. It is a very similar device (I can run ROMs for the T959V with limited problems - ie sometimes I get wakelocks and the gps never works), it has a different GPS chipset and also uses different cell bands (but I can still use your guys modems but I lose access to the 850Mhz band). I have created a build specifically for the T959V as best as I can guess and also provide T959P builds.
The USB connection is MTP and not mass storage as Omni has removed mass storage. In recovery there is still an option to mount as mass storage device.
This build is very close to the official omni source code. This means that the recovery is TWRP and there aren't any added "features"
In order to get it rooted, you need to install SuperSu.
Gapps reportedly slow down the device significantly so tread carefully.
Backup Backup Backup! I'm not responsible for you losing any data.
Working
Taking pictures
RIL
SMS
Data
Recovery
Bluetooth
Wifi
Vibration
Powered-off charging animation
Flash from BML
Video Recording
Automatic Brightness
Moving Apps to the SD Card
GPS
Encryption
Compass
SElinux in enforcing mode
What probably doesn't
Microphone mute option doesn't work during calls
What doesn't
720p recording is very laggy
What's been removed
TV-Out - It was removed upstream plus I think binary blobs are broken in Lollipop...
Live wallpapers - this is a low-ram device
Everything else is not tested!!!
XDA:DevDB Information
Unofficial OmniRom 5.1 for the Galaxy S 4G (T959V) and Galaxy S Fascinate 4G (T959P), ROM for the Samsung Galaxy S 4G
Contributors
xc-racer99, humberos
Source Code: http://github.com/omnirom
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: All
Based On: OmniRom
Version Information
Status: No Longer Updated
Created 2015-06-30
Last Updated 2016-05-12
Thanks Time!
This would not have been possible without the following people:
Thanks to humberos for bringing Lollipop to the first-gen Galaxy S series. This would not have been possible without his work.
Thanks to FB and Dao for their work on the CM-11 device tree. I used several of their fixes.
Thanks to noiphonehere for his device trees and kernel, most of my work was based off of his.
Thanks to bhundven and the other members of teamacid for their work on the aries kernel.
Thanks to all others that have helped get this phone to where it is today!
Thanks to vcmerritt. A name you're probably not familiar with, but he was the only one to create something for the T959P and without him I'd still be on stock...
Build your own!
Follow the instructions at http://docs.omnirom.org/Setting_Up_A_Compile_Environment using the android-5.1 branch
Before doing a repo sync, put the galaxy_s_series.xml file from the Download folder in .repo/local_manifests folder of the source tree.
After syncing the source, open a terminal and in the directory where you downloaded the source code type "source ./build/envsetup.sh" and then "brunch galaxys4gmtd"
Changelog
Changelog for 07/03/2015 Build
Newer Omni source
Added volume controls and flight mode toggle to power button menu
Added Bigmem option. This increases available RAM by ~20mb but breaks 720p video recording. Humberos created the kernel setup and I integrated a toggle for it into Advanced device settings.
Selinux is now in enforcing mode. I had to modify the GPS startup to have any chance of getting here. Please let me know if it still works/doesn't work/never worked
Notifications are sometimes wonky. To fix, in Settings, go to Performance, then Advanced. Select Force high-end graphics and reboot your phone.
Changelog for 2015/07/20 Build
The data partition is now the second partition of the SD Card as opposed to internal storage
Gapps now work. If you get error 461 when installing from Play Store, a full data wipe should fix it. You can try experimenting with clearing data for the Play Store and/or Play Services or removing and re-adding your Google account if you don't want to do a full data wipe.
HSPA vs UMTS settings in DeviceSettings has been fixed
High-End graphics are forced by default to fix notification issue
ART parameters have been tweaked
Miscellaneous other tweaks, see my Github for details
Changelog for 2015/07/24 Build
Stabilized bluetooth connection
Fixed typo in GPS initialization. Does it work?
Added ability to use f2fs file system on /data. Supposed to give better performance
Added force fast charge and touch wake to kernel. Touchwake is accessible through its sysfs path, fast charge through Performance Settings, BatterySelinux currently denies these requests...
Changelog for the 2015/07/29 Build
This is a maintenance build. Very little has changed
Some more RAM freed (disabled some debugging stuff, TV-Out driver, IR driver)
Sepolicy updated for fast charge and touch wake
GPS initialization tweaked - unsure if works. If it doesn't, a dmesg would be appreciated
Changelog for 2015/08/02 Build
SElinux changed to permissive - this build only
GPS sepolicy changed - unsure if all necessary things are implemented
Changelog for 2015/08/13 Build
Selinux back to enforcing. Thanks to @anoymonos for the dmesg and @DerPugNa for offering to send me one as well
Fixed encryption
Changelog for 2015/08/31 Build
Updated Android version (5.1.1_r5 to 5.1.1_r12)(upstream Omni Change)
Restoring /system in TWRP should now work
When installing from BML, a chance is given to install gapps and/or SuperSu before rebooting
zRam is now actually used...
Changelog for 15/10/2015 Build
Fixed typo in updater.sh (thanks @FBis251!)
Update Omni source code - plenty of little tweaks since last build
Source Code and Downloads
Main Source
http://github.com/omnirom
Device Specific Source Code
http://github.com/xc-racer99/android_device_samsung_telusgalaxys4gmtd for the device tree (see android-5.1-t959v branch)
http://github.com/xc-racer99/android_device_samsung_aries-common for the common device tree (see android-5.1 branch)
http://github.com/xc-racer99/android_kernel_samsung_aries for the kernel (see android-5.1 branch)
http://github.com/xc-racer99/proprietary_vendor_samsung for the prop blobs (see android-5.1 branch)
Downloads!
All builds are found at https://drive.google.com/folderview...VVSzJxYVU3eHlWZGR1VVNZUWk1V1QzOUk&usp=sharing
Please let me know if the link doesn't work! There are also builds there for the T959P, in case there are any users of it left.
Gapps
Gapps do not work on builds prior to 2015/07/20. On more recent builds, they can be installed from http://forum.xda-developers.com/showpost.php?p=59731008&postcount=2
SuperSu
SuperSu can be found at https://download.chainfire.eu/696/SuperSU/
Thanks thanks ....
Awesome work @xc-racer99!
Wow, bringing this ole device back from a coma here. Nice to see someone else willing to work on lollipop for this oldie but goodie. Keep this device alive man.
Edit: If you are in need for some GFX for this thread, let me know and I'll see what I can brew up for you.
GFX.myst. said:
Wow, bringing this ole device back from a coma here. Nice to see someone else willing to work on lollipop for this oldie but goodie. Keep this device alive man.
Edit: If you are in need for some GFX for this thread, let me know and I'll see what I can brew up for you.
Click to expand...
Click to collapse
I hope I can keep this great little device going a little longer, however it will probably get tough. I did a repo sync earlier today and things are starting to break. The last few builds haven't even booted. With humberos no longer maintaining the i9000 and aries-common, I've had to fork the aries-common repository to try to keep going. The only upside of this is that I now have a little bit more freedom and can add things in if I want to.
Thanks for the offer of the graphics. If I can get a new build working, then I'll probably take you up on your offer. I think I've traced the problem but I'll have to wait and see...
For anyone that is trying/has tried this out, I'd be very curious on the status of the GPS on the T959V. I'm interested in creating the sepolicies for it so we can put selinux into enforcing mode but I don't want to go to the effort if it doesn't even work right now.
I've downloaded the zip and one of the smaller Gapps packages...won't be able to flash until early next week...I'll be out of town...will post results later...thanks for keeping this phone current.
New Build Uploaded!
Download is still at the same link as before, just use the 2015-07-03 build
I managed to find out why my new builds hadn't been booting - it was because the syntax for using a custom kernel toolchain had changed.
Anyway...
Changelog for 07/03/2015 Build
Newer Omni source
Added volume controls and flight mode toggle to power button menu
Added Bigmem option. This increases available RAM by ~20mb but breaks 720p video recording. Humberos created the kernel setup and I integrated a toggle for it into Advanced device settings.
Selinux is now in enforcing mode. I had to modify the GPS startup to have any chance of getting here. Please let me know if it still works/doesn't work/never worked
On another note, I've had a look at re-implementing TV-Out support. It doesn't look promising as several of the functions in the android frameworks that it used have been tweaked.... Still working on it but don't hold your breath.
Also, if somebody could test dock audio that would be appreciated. I don't have any way of testing it. If it doesn't work, I do have an idea on how to fix it (for those interested, another almost-aries device, the Infuse 4G, had to modify things slightly to get it to work. I would try to emulate their solution).
Omg download nowwww....thanks my friend
Alright, I'm having some issues on the latest build with notifications and the lockscreen. I'm still working on tracing down the reason for the problem...
DickyG said:
I've downloaded the zip and one of the smaller Gapps packages...won't be able to flash until early next week...I'll be out of town...will post results later...thanks for keeping this phone current.
Click to expand...
Click to collapse
Hello, im a user of a t959v. And I've been using this rom for three days. Everything is fine and very smooth on this rom except that, I can't install anything from the playstore. I always get (cannot install app due to an error 963). And Ive tried all the gapps, even the new link provided but still no luck.
billowusu47 said:
Hello, im a user of a t959v. And I've been using this rom for three days. Everything is fine and very smooth on this rom except that, I can't install anything from the playstore. I always get (cannot install app due to an error 963). And Ive tried all the gapps, even the new link provided but still no luck.
Click to expand...
Click to collapse
Good to hear that that's its (mostly) been working for you. I was hoping that the gapps problem was just me
Out of curiosity, which of the alternate gapps did you try?
A brief google of the error brings up a couple of possibilities...
Try an older gapps version. The ones from devloz on the i9000 thread devloz and the oldest revision for 5.1.1 are probably your best bet. Please be aware that Google Play store will automatically update!!! In order to prevent this, you will need to create a folder called "com.android.vending-1.apk" in /data/app (use a root explorer such as ES File Explorer or adb if you know how). If a file with that name already exists, delete it first.
Another thing to try would be to unmount your sdcard first before trying to install an app. I know, its a terrible work-around but it should work. This is because the error is that Google Play is trying to save some data on your sdcard but then for some reason it fails (I'm not sure why).
I'll hopefully get around to seeing if its a permissions problem after I find out what's been causing the issue with the notifications on the latest build.
P.S. Does the GPS work?
Early update...
...ROM flashed fine...a little slow to boot...about 3 minutes...but it booted.
...Gapps flashed fine...used 20150513_5.1.x package
...Installed Super SU (although I don't think that's necessary) and TB.
...So far only gave a quick test to camera and web browser...no problems.
...Am now in the process of re-installing user apps and data from TB...this will take a while.
When I'm done with that, I use Link2SD to link most of my user files to the SD card. After that is all set up, I'll test stuff like GPS, root access, etc. I'll post back later...maybe tomorrow.
But so far so good.
OK...I did some testing tonight and here's some results.
Working:
.it boots
.root
.browser
.playstore
.camera
.link2sd (about 180 mb free in internal)
.camera
.wifi
.email
Nor working:
.bluetooth
.google search/voice search
.just about all the rest of the Gapps
.tons of force closes including Maps so can't test GPS
Won't be able to do anymore testing until next week.
DickyG said:
OK...I did some testing tonight and here's some results.
Working:
.it boots
.root
.browser
.playstore
.camera
.link2sd (about 180 mb free in internal)
.camera
.wifi
.email
Nor working:
.bluetooth
.google search/voice search
.just about all the rest of the Gapps
.tons of force closes including Maps so can't test GPS
Won't be able to do anymore testing until next week.
Click to expand...
Click to collapse
Alright, thanks very much for the update. I'll do some more testing here and see if I can solve anything. For me, bluetooth file transfers to the phone work but not from the phone.
I've been looking at the notification "error" where the lockscreen notifications do not appear correctly. It appears to have been introduced upstream with a merge. I'm having difficulty finding out exactly what changed and since no errors are being thrown in the logcat, it could be a while...
For testing the GPS, there's an app from the Play Store called GPS Test which does a nice job of showing satellites and whether or not you have a lock on them.
you're the man!
nice one! its nice that this device are still alive.! and now were on 5.1
DerPuGNa said:
nice one! its nice that this device are still alive.! and now were on 5.1
Click to expand...
Click to collapse
No, it should be Humberos is the man! I basically re-hashed his code for the i9000 and used bits and pieces from people like Bhundven, noiphonehere, maxfierke, Dao, and FB to get things to work properly.
For a status update, I figured out the lockscreen notification problem. I have a new build being made that I hopefully will be able to upload in the next couple of days (internet dependent). TV-Out looks totally broken as the proprietary blobs no longer function. I don't have the know-how to make ugly hacks to get them to work. The new build will have SElinux in enforcing mode and have the different GPS initialization (like the last build) until someone tells me that it doesn't work
Uh-oh, looks like I jumped the gun.... Having problems once again
Any updates on getting the play store to work? I have searched, downloaded, and tried every gapp made for 5.1. I found that I can load any app on the rom, if I get the APK version of it.
AgainstTheFlow said:
Any updates on getting the play store to work? I have searched, downloaded, and tried every gapp made for 5.1. I found that I can load any app on the rom, if I get the APK version of it.
Click to expand...
Click to collapse
Darn, so its still not working. Not surprising. I've been struggling on the notification issue and am at my wit's end as to what the problem is. I don't think its only our phone as several i9000 users have been reporting it as well. Whether it is only the first-gen Galaxy S series that is having the problem or not is anyone's guess. My programming skills are insufficient to fix the issue!
I'll have another look at gapps over the next couple of days and see if I can figure out a combination that works 100% of the time.
I'm assuming the error message is still 963 or does it silently fail now? Its probably related to the fact that we have only an external sd card and no internal sd card like most devices...
All the problems with the notifications that I've found are:
Only one notification will show up at a time
Large notifications such as the music player do not render properly. They are cut off at the normal notification size and occasionally it seems as if there are two layers there (one for the small version, one for the bigger version) (see attached picture, taken with VLC as the media player, but also appears with Apollo)
Notifications don't always show up. A little icon appears in the top left corner of the status bar but no notification is present. Seems hit or miss
The words No notifications appears in the lockscreen just above the clock when there are no notifications. Otherwise, a notification (and only one) which can't be clicked covers part of the clock