Database Info

How 2 Root 1.33.0006 SPL & Flash SPL || MyTouch3G / 32B Magic || Without Goldcard ||

How 2 Root 1.33.0006 SPL & Flash SPL || MyTouch3G / 32B Magic || Without Goldcard ||
Tutorial : Rooting the "perfect" 1.33.0006 SPL & Flashing a new SPL
Newb Difficulty Level: 5/10 (A learning android newb)
Advanced Root User Difficulty Level: EASY!
GIVE CREDIT WHEN ITS DUE!
Note to readers:
I actually found a easy fix for 1.33.0006 for 32B Magic or MYTouch3G phones
KEEP IN MIND THAT I AM USING A MERLOT MYTOUCH3G, Stock 4GB SD card & BROKEN "Market" Application SO MAKE SURE YOUR DOWNLOADING THE FILES THAT WORK BEST FOR YOUR DEVICE and I am only providing steps used to bypass the "PERFECT SPL 1.33.0006" & YOUR RESPONSIBLE FOR THE RESULT OF YOUR DEVICE!
FILES I USED:
*ADB is a MUST so make sure to watch this video to safely install ADB
(NOTE: The video is using 1.6 donut spk... the steps are the same but use the 1.5 r3 spk on the same page given on the video.)
*flashrec-20090815.apk
MAKE SURE YOU USE THIS VERSION...!
* "Rooted" Recovery Image
I am using Amon_Ra's recovery-RA-magic-v1.2.3G which in my opinion is the best as it has flashed every rom perfectly if you know what your doing but it depends on what rom you will be flashing in some cases.
* A NEW SPL!
I am currently using Engineering-SPL-HBOOT-1.33.2009-signed by Amon_RA (BIG UPs TO Amon_RA for these files) on my T-Mo MyTouch3G but it depends on your device.
NOW TO WORK!
Step One - Enable USB Debug/Development Mode:
*Load up your device till you reach your home screen. Once your device is up and running hold menu and go to settings>applications>development then enable "USB Debugging" then press home & plug the device up to your PC & DONT MOUNT.
Step Two - Install Recovery Image Loader via ADB:
*Open CMD and as the video above stated you must navigate to your ADB folder. Once that is done you should install flashrec-20090815.apk (Recovery Image Loader) though CMD by placing it on both your SDCARD & the ADB Tools Folder (For me its C:\android\tools\).
~Now type these commands within CMD:
cd c:\android\tools (press enter)
adb install flashrec-20090815.apk (press enter)
*Now you have installed Recovery Image Loader and you may now close CMD but dont restart your device
Step Three - Rooting the unrootable (Sorta):
*Now find your recovery image ( Example : Recovery-RA-Magic-v1.2.3G.img or Recovery.img). Once found rename it as "cm-recovery-1.4.img"! Save this file to the root of your SDcard & delete the "flashrec-20090815.apk". now press backup recovery image and wait till its done (quick 2secs) then erase everything but "cm-recovery-1.4.img" within the text box. Now type " /sdcard/cm-recovery-1.4.img ". Now press FLASH RECOVERY IMAGE and wait till its done. Once its done restart the device and be aware that you will lose everything that isnt saved to your google account or backed up to your PC.
SMART COMMENT: WOW DID I JUST ROOT THE UNROOTABLE? I guess I did lol
Step Four - Change SPL to Prevent this issue in the future:
*Move the SPL ( & the ROM if you want to start installing it right away ) you downloaded earlier to your SD card and delete everything else if you want. Now select "WIPE/FACTORY SETTINGS" and follow on screen instructions and then do this a additional 2 times to be safe. Now flash the SPL and once it starts to reboot on its own (after it shows the picture of a box and a device) hold the home button and then FLASH YOUR ROM
THATS IT! YOUR DONE AND YES I DID SHOW YOU HOW TO ROOT 1.33.0006 but it doesnt run properly so make sure you flashed a new SPL before flashing any new "Radio" or "ROM" images or you could brick your device.
HOPE THIS HELPED MANY WHO HAD PROBLEMS ROOTING THE DEVICE!​

isn't this just the same as the one click root? cuz on the one click root you don't need adb. It just seems like you are adding necessary steps to it. Please correct me if I am wrong. I don't mean to bash your work by any means.

I don't see why no one else has congratulated you on compiling one of these for those people that might eventually NEED THIS GUIDE! Lol.
Great work. Simple.
I had the "perfected SPL" when I picked up my MT3G on the release date. Pretty unfortunate...but I rooted it like two days later. Lol.

I never got an answer in the other SPL thread so here it goes...
Can we safely go from one SPL to another?? The reason I ask is I have the problem with the blurry screen at boot but I only encountered it when I flashed a new SPL. Now I have read up on it & it looks like some people running the same ROM with different SPL's don't have the blurry screen.
Seeing how so many people had problems bricking with haykuro's DangerSPL, the SPL is something I don't wanna mess with unless I have a definate answer. So anyone wanna chime in on this?

Beast84 said:
I never got an answer in the other SPL thread so here it goes...
Can we safely go from one SPL to another?? The reason I ask is I have the problem with the blurry screen at boot but I only encountered it when I flashed a new SPL. Now I have read up on it & it looks like some people running the same ROM with different SPL's don't have the blurry screen.
Seeing how so many people had problems bricking with haykuro's DangerSPL, the SPL is something I don't wanna mess with unless I have a definate answer. So anyone wanna chime in on this?
Click to expand...
Click to collapse
yea... could i go from 2005 one to the 2009 one? any help there?

bogdi1988 said:
yea... could i go from 2005 one to the 2009 one? any help there?
Click to expand...
Click to collapse
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks

Azuske said:
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks
Click to expand...
Click to collapse
No, you are right it won't be, but if you downgrade back to cupcake, you can one click again. Anyway, nice post man. Great job.

Thanks
Thats exactly why I posted this because I had a hard time getting back to cupcake because of the spl

Hello there, thanks for the guide.
I try to follow your guide to root my HTC Magic and I have some questions.
1. I run the command "adb install flashrec-20090815.apk " and it installed the flashrec to "/data/local/tmp" directory. Is this correct?
2. I copied the recovery image to the sd card and insert into the phone. then based on you guide. I should delete the flashrec I installed while ago. But I cannot delete the file. Can you give us more details regarding this one? Thanks.
3. Sorry but I have some hard time to sollow the step three. Can you give us more details about this.
thank you and good day
Steven

To be 100% honest im not sure where it is saved... i just happened to run into a working solution at random.
I do know that the older version i tried (Recovery Image app) didnt want to install

Reignzone said:
I don't see why no one else has congratulated you on compiling one of these for those people that might eventually NEED THIS GUIDE! Lol.
.
Click to expand...
Click to collapse
Umm because it doesn't do anything. flashrec ANY VERSION does NOT work on a phone with 1.33.0006

scrufy Originally Posted by Reignzone I don't see why no one else has congratulated y for those people that might eventually NEED TH. Umm because it doesn't do anything. flashrec ANY VERSIO phone with 1.33.0006 Today 03:28 Pm. Yes it did for me. at least in cupcake.I'm not sure in donut.guess you have to downgrade to cupcake.

scrufy said:
Umm because it doesn't do anything. flashrec ANY VERSION does NOT work on a phone with 1.33.0006
Click to expand...
Click to collapse
LOL WOW he had the same problems dude and he is a developer...
Maybe you did something wrong when installing it

Azuske said:
@Everyone above (excluding Reignzone)
Lol really? okay try flashing 1.33.0006 haha
It wont be as easy as you all think
@Reignzone
Thanks
Click to expand...
Click to collapse
So basically what you're saying is you don't know?? If you don't, that's cool. But don't laugh & then not give an answer. Just makes you seem arrogant, like you feel better than us. Which, by the way, YOU AREN'T!

Beast84 said:
So basically what you're saying is you don't know?? If you don't, that's cool. But don't laugh & then not give an answer. Just makes you seem arrogant, like you feel better than us. Which, by the way, YOU AREN'T!
Click to expand...
Click to collapse
Sorry if you took it that way but that isn't what runs through my head when I laugh or anything... My bad -_-
ANYWAY I only know what I posted... I am a learning newb and I am getting better at this stuff as I go. My tutorial explains exactly what I did.
EDIT:
P.S. My smartass comment was for the people that was calling this useless just because they didn't experience this issue

Azuske said:
Sorry if you took it that way but that isn't what runs through my head when I laugh or anything... My bad -_-
ANYWAY I only know what I posted... I am a learning newb and I am getting better at this stuff as I go. My tutorial explains exactly what I did.
EDIT:
P.S. My smartass comment was for the people that was calling this useless just because they didn't experience this issue
Click to expand...
Click to collapse
Eh no hard feelings, I was just looking for a straight answer. I just wanna get rid of that damn blurry screen, thats all. Thanks for the step by step tho. I did it the easy way with one click root but I did my G1 the hard way so I know how frustrating things can get. Thanks again

i was able to flash SPL 1.33.0006
I had rooted my MYTOUCH 3G in August using the one-click method. I have been running several ROMS since then. But I never tried to flash a new SPL. However, after reading this post I decided to give it a try. I booted into recovery mode/ wiped and then flash 1.33.2009 SPL. It loaded and rebooted into recovery again. I then wiped and loaded a ROM. everything is fine.
Later I checked and I now have 1.33.2009 SPL the perfect SPL 1.33.0006 is gone.

so im on a rooted mt3g, i have been running different roms, cyan, hero, dwang, i am at dwang 1.13. so to flash the 1.33.2009 spl do i have to wipe and flash to dwang 1.12 then flash the spl then dwang 1.13?
also what are the advantages/disadvantage?
which spl should i use?
thanks

Hi
I have 1.33.0004 on my 32B Sapphire and Android 1.6. Will this method help me root my phone? If not then is there an easy way to root my phone?
Thanks in advance

Non Newb w/ a newbie question =)

I fell off the face of the planet when it comes to updating my phone. I followed directions a long time ago to convert my mytouch 32a to a 32b device and also downgraded the spl (i believe thats what it was)
My question is:
Im looking to put another rom on here, this isnt as easy as it was w/ the g1 i had used for a while.
Im wondering how to properly flash this rom to my phone. Do i just do a normal wipe and flash?
http://forum.xda-developers.com/showthread.php?t=575501
im very familiar w/ adb and commands, just let me know the proper process needed and that should do it really. Just dont want to brick my phone due to something i SHOULDNT have did (something with the spl not being right, if i remember im on the 2005 that was needed due to the unrootable spl that was shipped w/ the phone, goldcard method).
***EDIT***
forgot to mention clearly that i am running cyanogens last rom right before googles butt in.
If this steps on anyones toes, sorry.

If your just trying to update the rom, do a wipe then update the rom, not gonna brick it unless your doing spl... be sure to nandroid before...

what spl do you have right now? haykuros 1.33.2005? what rom do you want to flash?

Ohh and it is much easier than when I first did it with the G1.. so relax, take your time, look at what rom you need, research the recovery rom as you didnt mention it.

to tell what spl you just boot the phone with power and back then read from the top

scrufy said:
to tell what spl you just boot the phone with power and back then read from the top
Click to expand...
Click to collapse
im using the 2005 haykuro i believe, the one that you used through tutorials to get rid of the unrootable spl. I am using the RAv1.2.1g recovery.
the whole "wiping and flashing" isnt a problem with a nadroid backup. Only thing confusing me is this 32a and 32b. Since i "converted" im confused as to how dedicated these for functionality.

well when you boot into fastboot what pvt board does it say? i would ask around because i didnt know you could change pvt boards...this could either be a BIG THING or it couldnt matter...

oshizzle1991 said:
well when you boot into fastboot what pvt board does it say? i would ask around because i didnt know you could change pvt boards...this could either be a BIG THING or it couldnt matter...
Click to expand...
Click to collapse
exactly why i created the thread
im currently running the sapphire pvt 32b
hboot-1.33.2005
radio is 2.22.19.261

[32A] Install official sense UI (3.05.401.3) without getting perfect SPL!

Alright, so HTC released the sense UI update to 32A in Europe some days ago. After searching around I figured how to flash it without getting stuck at perfect SPL. Therefore; I'd like to say that this is very little my own work. I only wrote everything I found here.
I'd like to thank these people/sites for learning me this:
Radix999, for his page in the wiki.
TheUnlockr, for fantastic guides about rooting.
cursordroid, for the correct order to flash radio/hboot.
vmaxada, for how to get rom.zip and rom1.zip.
Read everything before trying if you don't want to risk your phone.
You will need engineerings SPL before doing this. Means it won't revert the perfect one.
Disclaimer:
I'm not responsible for anything may happen to your phone during this update.
Only apply this on a sapphire 32A.
There's always a risk when flashing images to your phone, but if you follow the instructions, you should be fine.
This update will give you:
HBOOT-1.76.2007
RADIO-6.35.08.29
ROM version 3.05.401.3
Alright, so what you'll first need is the files. There's two ways to get these. First one, would be to download them (defiantly easiest). The second would be to fetch them from HTC's update file, I'll write this only for learning purposes, so if you're not interested in learning, do it the first way.
opinion 1
Download the files
I've collected everything for you in one file.
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver(eng spl).rar (mirror) password: for xda
Extract the files to somewhere you'll find them. Like C:\AndroidSDK\tools.
opinion 2
Fetching the files yourself
Doing it this way will take a lot longer than the first, but you'll learn more.
Here you'll need two files:
The official update file, RUU_Sapphire_HTC_Europe_305401 (mirror) and the SPL version, hboot-1.76.2007.
Copy the hboot-1.76.2007 to somewhere you'll find it, like C:\AndroidSDK\tools.
Boot your phone into fastboot mode (back+power) and connect it to your computer using USB. Run the file you downloaded, RUU_Sapphire_HTC_Europe_305401, and continue until it's done displaying "Confirming info about the Android phone" (I'm not sure if it's exactly the same displayed, but it should have the same meaning). When it's done with that, STOP, don't cancel, but don't do anything further.
Keep the update window open, and go to Start - Run, then type in %temp%. Search for "rom*.zip". You should get rom.zip and rom1.zip as results. Copy both the files to your desktop. Cancel the update.
Note: People have reported the files won't open with the built-in zip extractor in Windows, you'll might need WinRAR.
Open the two zip files. Extract the following files to the same place where you putted the hboot-1.76.2007:
Code:
boot.img
radio.img
recovery.img
system.img
userdata.img
After doing this you're done with getting the files.
Flashing
Now you're done with most of the work, everything left is flashing.
Boot your phone to fastboot (back+power), and connect it to your computer. Open up terminal (cmd) and "cd it" to the directory where you have the system files.
Code:
cd C:\AndroidSDK\tools
Then type in this, to check your phone is connected.
Code:
fastboot devices
If you get a serial number, your phone is connected and you can proceed.
Now, type in the following and hit enter after every line:
Code:
fastboot flash radio radio.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery.img
fastboot erase system –w
fastboot reboot-bootloader
Now your phone should reboot into fastboot. Make sure you have HBOOT-1.76.2007 and RADIO-6.35.08.29. If you have that, you can type in the rest:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
Now your phone will reboot, and you'll have the official sence UI, but still engineerings SPL!
As you may have noticed, my English isn't perfect. If you see something wrong with my grammar please tell me what's wrong.
If you want a custom recovery, you'll have to install a Hero recovery. I recommend RA-hero-v1.5.2.

First of all this is old news already explained by Cursordroid who, i can see, you didnt not bother to thank! Trying to take credit for something that someone else did is not a good idea.
Secondly, your info is wrong. You will not end up with that version of the radio but with 6.35.08.29, nor is there rom2.zip but rom1.zip (at least for me it was that way). By flashing the new radio, people will be confined to using official 3.03/3.05 ROM, CursorSense, Cursor's t-mobile fender rom and some other roms (1-2 more exist currently) that i did not test. Otherwise a downgrade to the old radio is required! (e.g for running CM you need to downgrade the radio).

Did actually need another post on this topic??

The mirror I'm using is screwed at the moment, uploading takes longer then I expected.
eyegor said:
First of all this is old news already explained by Cursordroid who, i can see, you didnt not bother to thank! Trying to take credit for something that someone else did is not a good idea.
Secondly, your info is wrong. You will not end up with that version of the radio but with 6.35.08.29, nor is there rom2.zip but rom1.zip (at least for me it was that way). By flashing the new radio, people will be confined to using official 3.03/3.05 ROM, CursorSense, Cursor's t-mobile fender rom and some other roms (1-2 more exist currently) that i did not test. Otherwise a downgrade to the old radio is required! (e.g for running CM you need to downgrade the radio).
Click to expand...
Click to collapse
Where did I try to take credits from him? I fixed the wrong info (sorry about that). Also, where did he explain this? I know he explained how to get this radio, SPL and Hero recovery. But nothing about the official sence ROM?
fregor said:
Did actually need another post on this topic??
Click to expand...
Click to collapse
Where's the other topic about this?

He did some time ago make a toping regarding flashing 3.03 without getting stuck with the perfected spl. After making CursorSense however he eventually deleted his 3.03 thread.
You did not directly state that you were to be credited for this work but you did not thank him for doing it either. And all you did was "steal" (steal because you failed to thank the man) his method.

eyegor said:
He did some time ago make a toping regarding flashing 3.03 without getting stuck with the perfected spl. After making CursorSense however he eventually deleted his 3.03 thread.
You did not directly state that you were to be credited for this work but you did not thank him for doing it either. And all you did was "steal" (steal because you failed to thank the man) his method.
Click to expand...
Click to collapse
Alright. I'll thank him, but for what?

In other news, I still can't manage to upload the files (crappy outline I guess). I, however, added links to the same files. They are not uploaded by me though.

perfected spl
can we use this method if we already updated to a perfecter spl (1.76.0010)?

WTF
Hey dude!!!
You forgot to mention me under the thanks to, part that you don't even have!!
I hope you feel good about yourself!
and you searched? No! You asked me!
This is last time I'm helping you!!

Still... this is not for us who have already been stuck with perfected SPL...

Can I use these instructions if I have hboot-1.33.0010 (sapp10000)? or do I need to use goldcard to get 1.33.2010 first?
Thank you

Nope you will need eng spl to fastboot...
But he forgot to write anything about that!!
So you need the 2010 before you can even start...

Yeah, I thought so too...
Thanks

ralle.gade said:
Hey dude!!!
You forgot to mention me under the thanks to, part that you don't even have!!
I hope you feel good about yourself!
and you searched? No! You asked me!
This is last time I'm helping you!!
Click to expand...
Click to collapse
Look at the date I posted this thread, 22th. I asked you my first question the 23rd.
All the info I needed to write this, i found on the wiki (thanks radix), the unlockr, and other places.
What was I supposed to thank you for anyway?

Mine have perfect SPL
SAPPHIRE PVT32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
If I'm upgrade this rom by using gold card, can I have a new SPL?

guys, after i installed this rom,,,i installed the ra recovery 1.5.2H, and when i tri to acess to the recovery it blocked!!! no way to rebbot....i have to remove the battery..i tried several times...always happen the same...
any idea?

zouky007 said:
guys, after i installed this rom,,,i installed the ra recovery 1.5.2H, and when i tri to acess to the recovery it blocked!!! no way to rebbot....i have to remove the battery..i tried several times...always happen the same...
any idea?
Click to expand...
Click to collapse
What recovery image did you use?
As far as I can tell you need the hero version for this rom/radio. So I'm thinking you used the sapphire version.

muuu said:
What recovery image did you use?
As far as I can tell you need the hero version for this rom/radio. So I'm thinking you used the sapphire version.
Click to expand...
Click to collapse
Yes. Flash the RA-hero-v1.5.2 recovery using:
Code:
fastboot flash recovery recovery-RA-hero-v1.5.2.img
shokuhawan said:
Mine have perfect SPL
SAPPHIRE PVT32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
If I'm upgrade this rom by using gold card, can I have a new SPL?
Click to expand...
Click to collapse
No. You'll need engineerings SPL. Try this.

Any ideas whats going on with my unit? It seems to be crashing when writing the radio. I see the red bar go all the way to the top, and then it just sits there forever... any ideas?

gunigugu said:
Any ideas whats going on with my unit? It seems to be crashing when writing the radio. I see the red bar go all the way to the top, and then it just sits there forever... any ideas?
Click to expand...
Click to collapse
Did you flash it in the correct order? If not, try flash back to a hboot that suits with your current radio. Then flash this radio.
In other news, I finally managed to upload the files myself.

[HOW-TO] Haykuro SPL, Danger SPL, Death SPL FOR DREAM/G1

***MOD EDIT***
PLEASE READ THIS THREAD FOR UP TO DATE INFORMATION : http://forum.xda-developers.com/showthread.php?t=655097
***O.P. EDIT***
The link above does contain some more detailed information but the guide below has yet to cause a brick.
IF YOU PLAN TO FLASH THIS SPL PLEASE READ THIS WHOLE POST
This is for the Dream/G1 ONLY. If you have a Sapphire/MT3G this SPL is not needed.
If you have no idea what a SPL is or you are looking for info on other SPLs please read this page http://code.google.com/p/android-roms/wiki/SPL
Let me start off by saying that I have nothing to do with the actual development of the SPL. I also take no responsibility if you do decide to flash this SPL and brick your phone. That being said I decided to create a "How To" for the SPL for the simple fact that I would have switched to it long ago if I knew how easy and safe it was.
The SPL that you need for many of the new Eclair ROMs along with Hero ROMs and some Donut ROMs like Super D is a special SPL created by Haykuro that basically gives you more space to flash larger ROMs. When Haykuro first released the SPL there were reports of people bricking their phones. It turned out that the reason for the SPL causing a brick was because the SPL needed to be flashed over the latest radio and requires a PVT board. If the SPL is flashed over a radio version prior to "2.22.19.26I" or on a DVT board it will cause a brick. After people heard about this SPL causing bricks it became known as the Danger or Death SPL because of the danger that it can cause death to a G1.
A lot of people including my self were very worried about flashing the SPL in fear of a bricked phone. The result being many people not wanting to flash certain ROMs because they do not want to brick their phone. Some devs have actually changed their ROMs just to make them small enough to flash with out the Danger SPL so that more people will use their ROM.
Well if you are reading this and you don't have the Danger SPL because of the fear of a brick well then don't worry its ok to be scared but this "How To" will get you through it safe and sound.
IMPORTANT: Before going any further make sure that you have PVT board. You can do this by rebooting your phone and holding the camera button. The first line should say "PVT" if you see "DVT" then DO NOT flash this because odds are you will get a brick but If it says "PVT" then you are good to go.
First you are going to need to download the latest radio and the SPL. both can be found here http://code.google.com/p/sapphire-port-dream/ There is also a new radio that is compatible that can be found here http://forum.xda-developers.com/showthread.php?t=640535
Prior to starting the installation process please make sure that your battery has a good charge. Also DO NOT pull your battery out at anytime during the installation process. I know it seems like common sense but I read a thread where someone had pulled their battery in the middle of the installation process and they ended up with a brick.
Now that all that's out of the way lets get started!
1. Copy "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" and "spl-signed.zip" onto the root of your SD card.
2. Reboot into recovery. I suggest using the RA-dream recovery you can download it here http://forum.xda-developers.com/showthread.php?t=566669
3. Wipe your phone "factory data reset" (this step isnt really necessary since your phone is wiped after flashing the SPL but I always like to wipe before flashing anything)
DO NOT SKIP THIS NEXT STEP OR YOU WILL BRICK YOUR PHONE
You must have the latest radio "2_22_19_26I" or "2_22_23_02" to flash this SPL if you already have the latest radio you should not have to flash it again but it will not hurt if you do flash it again. When in doubt flash it anyway.
4. Flash the Radio "ota-radio-2_22_19_26I.zip" or "G1-radio-2_22_23_02.zip" it will install and then it will ask you to reboot to finish the installation, so reboot, it will then finish installing and then reboot back into recovery.
5. Flash the SPL "spl-signed.zip" it will install and then ask you to reboot to finish the installation, so reboot, it will then finish installing and reboot into recovery so you can flash your ROM
A simple way to make sure that the SPL flashed correctly is when you reboot to the boot loader screen by holding the camera button you will see HBOOT-1.33.2005. You can also see that it flashed correctly by checking your system size it will now be 89mb a very easy was to check this is with the My Account app available in the Market.

Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.

kathi17 said:
Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.
Click to expand...
Click to collapse
PVT = a must have.
Also forgot to mention that when you reboot after flashing the SPL, you have to reboot with Home+Back

kathi17 said:
Great idea to post this again, since so many people are asking about it.
I flashed mine way back when Haykuro first posted it, and I seem to remember that you had to have a PVT board as well. Is this still the case? I can't remember whether or not anyone found out otherwise.
Click to expand...
Click to collapse
Yeah thats a big reason I decided to post this, so many ROMs now say they require Death/Danger SPL and only a couple actually provide a link or some type of simple instructions. I figure with a dedicated "How To" we can eliminate questions about the SPL in ROM threads and make people feel a little more comfortable with flashing it. I dont believe anyone actually tested it without a PVT board. I havent even seen anyone one here that doesnt have PVT board. Just in case though I will edit the OP, thanks for remembering that because I completely forgot that it has only been tested on a PVT board as far as I know.

also you should include how to know which spl you have. i was about to flash the danger spl again because i forgot i already had it

xsnipuhx said:
PVT = a must have.
Also forgot to mention that when you reboot after flashing the SPL, you have to reboot with Home+Back
Click to expand...
Click to collapse
I rebooted with the reboot option in the recovery with out an issue.

Joe333x said:
I dont believe anyone actually tested it without a PVT board. I havent even seen anyone one here that doesnt have PVT board. Just in case though I will edit the OP, thanks for remembering that because I completely forgot that it has only been tested on a PVT board as far as I know.
Click to expand...
Click to collapse
If I remember right, some people flashed the radio first, and still bricked, and the difference was that they didn't have a PVT board.
Maybe you should also put in big red letters at the beginning about flashing the radio first. You can tell by reading all the questions on here that at least half of the people don't read the instructions, they just flash away in any order they feel like flashing!

kathi17 said:
If I remember right, some people flashed the radio first, and still bricked, and the difference was that they didn't have a PVT board.
Maybe you should also put in big red letters at the beginning about flashing the radio first. You can tell by reading all the questions on here that at least half of the people don't read the instructions, they just flash away in any order they feel like flashing!
Click to expand...
Click to collapse
Very true red letter warning has been added.
Please if anyone has suggestions for this "How To". Dont hesitate to post. I made this to help people out so if you have an idea that will help let me know.

When I first got a G1 as a test phone I tried to flash the radio/spl and it failed repeatedly. I'll try it again as I have had the phone for awhile and I want to try some of the newer ROMs
EDIT: Still getting fails on the radio flash.
it says:
Install from sdcard
Finding update package
Opening update package
E: Can't open /sdcard/ota-radio-2_22_19_26I.zip (bad)
Installation aborted
could it be my sd card?

It looks good now!
I remembered right:
Ok if u press the camera button + power to power the phone up and if u see "PVT" then ur good to go if u see "DVT-1 or 2" then u should defenetly not flash cuz almost every1 with dvt gets "bricked".
Click to expand...
Click to collapse
form this thread:
http://forum.xda-developers.com/showthread.php?t=517593&page=9

So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?

MaDaFGG said:
So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?
Click to expand...
Click to collapse
The Haykuro/Death SPL IS the Danger SPL.

MaDaFGG said:
So, where can I get the Haykuro/ Death SPL ? Do it same way like Danger SPL ?
Click to expand...
Click to collapse
it is called Haykuro SP: .2005 you guys have to get your facts straight.Haykuro is the person that ported the Magic's SPL to the Dream to allow larger roms to be installed.
Both the Radio & SPL are here:
http://code.google.com/p/sapphire-port-dream/

So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?

kathi17 said:
It looks good now!
I remembered right:
form this thread:
http://forum.xda-developers.com/showthread.php?t=517593&page=9
Click to expand...
Click to collapse
Thank for finding that I just edited it again

I'm snowed in tonight, so I'm gonna try this out. I hope everything I need to know is here. If I do a Nandroid+EXT backup before, will I be able to Nandroid Restore after the SPL upgrade?

So I tried to flash the spl yesterday cuz i wanted to try out some new roms, but I kept on getting errors everytime I flashed the spl and it aborted. So after a while i just gave up and went back to cyanogen. Does anybody know why there would be errors when installing the spl. and yes I did flash the radio first.

rizocreations said:
So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?
Click to expand...
Click to collapse
That is correct. This SPL actually is the one that if for your mt3g but edited for the G1 so that it can flash larger ROMs.

rizocreations said:
So does SPL flashing only apply to G1's? I have a mt3g. I can safely flash any rom w/o flashing an SPL first?
Click to expand...
Click to collapse
Its called Sapphire to dream port for a reason.You can use the .2004 or .2010 SPL or whatever its called instead.

If I already have the correct radio, do I have to re-flash the radio again before flashing the SPL?
The reason I am asking is that I have 2 G1's.. the first I unknowingly did everything right and have the danger SPL without any problems. When I went to root the second one a couple of months later, I bricked it even though I thought I did everything right. Now my "new" phone has the correct radio, but only the engineer's SPL and I want to try some of the newer ROMs but am afraid to brick the phone again.
Thanks

What the f did i do?! and how do i fix it?

So i think i know what i did wrong, but is there anyway to fix it? I have a 32b which i rooted with the "recovery-RA-sapphirev1.5.2H", then i tried to update the radio with the "update-radio-32A-6.35.08.29-signed" (i didnt read the "32A"). Then i tried to reboot the phone and it got stuck on the "Mytouch 3g" green start up screen, i cant get to the recovery image by holding home+end.
My understanding (please correct me if im wrong) to get the new Nexus ROM was that i had to;
1) Go the the 1.5.2 recovery image & wipe
2) Partition the card (and convert Ext2 to Ext3 or Ext4 depending on the ROM), reboot
3) Flash the new Radio, then reboot
4) Wipe, Flash the new SPL, then reboot
5) Wipe, flash the new ROM, and reboot
Im sure what i did was noobish...
Previously i had been using the 1.3.2 immage and had loaded Hero ROM's and tweeked Cupcake ROM's just fine, it was only when i had to update the radio and SPL was it that i found difficulty, mostly because i found too many and didnt know which one to use.
PLEASE HELP!!!
I'm willing to try anything. I hope i can get this fixed by this afternoon =,(

My first guess is that you are f**ked!
Only 2 "Nexus" roms I know that require new radio are for the 32A. And only new radio I know is for the 32A Magic!
Don't know where you got the instructions to upgrade your radio, but the ones I read stated that you have to flash radio, hboot, recovery in this sequence, and THEN reboot. Also, your recovery should be for 32B, dunno how you missed that one.
Try this: find your old radio image, your old hboot and recovery, boot in fastboot mode (back+power) and type in the following commands from the Android SDK tool directory:
Code:
fastboot flash radio your_radio.img <enter>
fastboot flash hboot your_hboot.img <enter>
fastboot flash recovery your_recovery.img <enter>
fastboot erase system -w <enter>
fastboot reboot-bootloader <enter>
You should now have rebooted back in fastboot mode. If that worked, try to reboot into recovery and see that works.
Once in recovery you can restore or flash another 32B rom.
See here for Engineering hboot images.
Download recovery for 32B

I found the link on theunlockr.com
developers.com/showthread.php?t=598973
And found instructions on youtube "ECLAIR 2.1 ROM REVIEW AND TUTORIAL !!!" and tweaked it slightly because i found a recovery image for my sapphire which didn't support either the spl or the radio, i forget... I've been up since 3am on Wednesday because of work and school, and now its 9am Thursday.
I was reading that 32b ROMs were working for the 32a, so i thought i might try a 32a since none of the links on Amon_RA's page developers.com/showthread.php?t=529019 were working for me.
I cant get to the fast boot menu... so that way doesnt work

Some_Biker_Guy said:
I'm willing to try anything. I hope i can get this fixed by this afternoon =,(
Click to expand...
Click to collapse
I think you are rather screwed. I believe the phone boots up the radio image before the bootloader and therefore you can't even get to flash a new recovery or radio image as the boot process is halted because of the defective radio image.
The only salvation I know if is a JTAG connection. This involves open up and soldering stuff to the mainboard of your phone. Since you're asking you probably not familiar with it I wouldn't recommend it to you.

you have a mytouch 3g right? if so, you flashed the wrong radio image. you flashed the ra(blahblahblah)H! not the ra(blah)G! "H" IS FOR HTC BRANDED "G" IS FOR GOOGLE BRANDED (THE MT3G). so that is your first issue. try to boot into fastboot and flash the RIGHT RECOVERY IMAGE.

wow as soon as I looked at this thread, you made so many mistakes on the first sentence lol. I hope you learn to read and not rush things next time ^^ Recovery H = 32A, Radio says 32A, and you have a 32B and now you can't get into fastboot? I'm 99.9999% sure it's bricked, but correct me if I'm wrong! 32B roms work for 32A when you port them over. Seems like you did almost no research at all.
You're understanding of what to do is right, but you didnt pick ANY of the right files

KAwAtA said:
wow as soon as I looked at this thread, you made so many mistakes on the first sentence lol. I hope you learn to read and not rush things next time ^^ Recovery H = 32A, Radio says 32A, and you have a 32B and now you can't get into fastboot? I'm 99.9999% sure it's bricked, but correct me if I'm wrong! 32B roms work for 32A when you port them over. Seems like you did almost no research at all.
You're understanding of what to do is right, but you didnt pick ANY of the right files
Click to expand...
Click to collapse
I agree with KAwAtA. You pretty much did the right steps (kinda) but you got the wrong files and now you got a nice brick. You should do research and know how to tell if your phone is 32A or 32B, why you should never flash the wrong radio/spl for your type of phone, and what ROMs are compatible with your hardware and why you should never flash the ROMs for another piece of hardware.
Well look on the bright side, since you bricked your magic, instead of trying out the "Nexus" ROMs, you can now buy a Nexus One for real but do not ROOt it because you might flash a 32B radio on it and make that a fancy brick.

damn sorry bro. does sound like everything that could have gone wrong went wrong for you. i also went to theunlockr to root my phone and add roms to it but i read those instructions like 3 times and watched the videos a few times when i first did it. oh well, you'll learn from this at any rate.

AndroidNoobie said:
Well look on the bright side, since you bricked your magic, instead of trying out the "Nexus" ROMs, you can now buy a Nexus One for real
Click to expand...
Click to collapse
that lucky SOB!

you can't get into recovery, that's fine, but can you boot into hboot and fastboot mode? if so, your phone will be fine, just have to fastboot flash the right junk on

Some_Biker_Guy said:
So i think i know what i did wrong, but is there anyway to fix it? I have a 32b which i rooted with the "recovery-RA-sapphirev1.5.2H", then i tried to update the radio with the "update-radio-32A-6.35.08.29-signed" (i didnt read the "32A"). Then i tried to reboot the phone and it got stuck on the "Mytouch 3g" green start up screen, i cant get to the recovery image by holding home+end.
My understanding (please correct me if im wrong) to get the new Nexus ROM was that i had to;
1) Go the the 1.5.2 recovery image & wipe
2) Partition the card (and convert Ext2 to Ext3 or Ext4 depending on the ROM), reboot
3) Flash the new Radio, then reboot
4) Wipe, Flash the new SPL, then reboot
5) Wipe, flash the new ROM, and reboot
Im sure what i did was noobish...
Previously i had been using the 1.3.2 immage and had loaded Hero ROM's and tweeked Cupcake ROM's just fine, it was only when i had to update the radio and SPL was it that i found difficulty, mostly because i found too many and didnt know which one to use.
PLEASE HELP!!!
I'm willing to try anything. I hope i can get this fixed by this afternoon =,(
Click to expand...
Click to collapse
Well, I BRICKED BRICKED BRICKED my other mytouch. Im talking where the computer wouldn't recognize it, wouldn't charge, turn on, splash screen, NOTHING. Wasn't the battery. If you can get to the screen (where you hold down volume and power) you can probably recover it. DON'T know if this would work but it may be worth a try read this link to get it un-rooted and then retry. http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/

iluvmymytouch said:
Well, I BRICKED BRICKED BRICKED my other mytouch. Im talking where the computer wouldn't recognize it, wouldn't charge, turn on, splash screen, NOTHING. Wasn't the battery. If you can get to the screen (where you hold down volume and power) you can probably recover it. DON'T know if this would work but it may be worth a try read this link to get it un-rooted and then retry. http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
Click to expand...
Click to collapse
maybe u already tried.

dan-htc-touch said:
you can't get into recovery, that's fine, but can you boot into hboot and fastboot mode? if so, your phone will be fine, just have to fastboot flash the right junk on
Click to expand...
Click to collapse
he already said that he couldnt get into fastboot mode. most likely its a brick..

oshizzle1991 said:
you have a mytouch 3g right? if so, you flashed the wrong radio image. you flashed the ra(blahblahblah)H! not the ra(blah)G! "H" IS FOR HTC BRANDED "G" IS FOR GOOGLE BRANDED (THE MT3G). so that is your first issue. try to boot into fastboot and flash the RIGHT RECOVERY IMAGE.
Click to expand...
Click to collapse
I tried the "G" and it didn't work, so i tried the "H" and it worked. Fastboot didn't work...

Thanks everyone for you input... this is my reply to everyone since i cant reply to one/ a few at a time.
1) I knew how to root my phone, and did it multiple times. I also unrooted it a few times as well (just to get a fresh start and make sure i knew how to). I also loaded many different ROM's onto it including Hero and tweaked cupcake ROM's
2) Fast boot did not work, and the computer would not recognize the phone at any point.
3) The unlockr did a good job with instructions on how to root and unroot then loading the hero and cupcake rom's onto it but it had no explanation for loading the nexus rom onto it, although it did feature a link on where to get it. therefore i tried to piece together ways to update the radio and spl (this is where it all went to hell). i figured out that that is what i needed to do to run the nexus rom.
ok, ok now i know, wait for a full set of instructions for my specific phone to try to put the newest and coolest rom onto my phone... :/
4) i got it all taken care of, got "new" phone for free! so glad it worked out.