This is a a new one from what I have seen, after several random restarts I flashed back to stock and was able to install the jh7 update. I rooted with z4root. I wanted to enable sideloading and used a guide that allowed you to change the settings.db file in sqlite and reinstall to the settings folder under dbdata. The instructions were to delete the file and so I did, but to my horror I was not able to past the new file into the directory using root explorer. Knowing that something bad was going to happend I restarted anyway and low and behold, the phone no longer boots past the S screen. The screen goes black and the buttons on the bottom turn on but thats all you get. I tried the hold volume buttons and plug in. I also tried hold volume buttons and power. I tried to make my own jig using three 100 ohm resistors as shown on youtubne and nothing gets me into download or recover modes. I have ordered a jig from a guy over and androidforums hoping for user error in my jig attempt. Anyone have any suggestions, my build is 1009 rev .04. My computer does recognize the the partitions when I plug it, but of course I can not mount. Is there a way in either windows or linux to force a mount, and to get into the file system to restore the back up I made. Without this settings.db file will I even be able to enter recovery or download mode? Thanks for any help you can give.
hd779 said:
This is a a new one from what I have seen, after several random restarts I flashed back to stock and was able to install the jh7 update. I rooted with z4root. I wanted to enable sideloading and used a guide that allowed you to change the settings.db file in sqlite and reinstall to the settings folder under dbdata. The instructions were to delete the file and so I did, but to my horror I was not able to past the new file into the directory using root explorer. Knowing that something bad was going to happend I restarted anyway and low and behold, the phone no longer boots past the S screen. The screen goes black and the buttons on the bottom turn on but thats all you get. I tried the hold volume buttons and plug in. I also tried hold volume buttons and power. I tried to make my own jig using three 100 ohm resistors as shown on youtubne and nothing gets me into download or recover modes. I have ordered a jig from a guy over and androidforums hoping for user error in my jig attempt. Anyone have any suggestions, my build is 1009 rev .04. My computer does recognize the the partitions when I plug it, but of course I can not mount. Is there a way in either windows or linux to force a mount, and to get into the file system to restore the back up I made. Without this settings.db file will I even be able to enter recovery or download mode? Thanks for any help you can give.
Click to expand...
Click to collapse
Can't you get into download mode through vol up + vol down + usb cord? That's used by sbl.bin, which shouldn't be affected.
Sent from my SAMSUNG-SGH-I896 using XDA App
A) this is not a brick, your phone still powers on
B) if you were rooting, you should have enabled USB debugging before attempting to do so, so when you turn your phone on, plug the USB in and use adb from the android sdk to get into download mode. "adb reboot download"
Kaik541 said:
A) this is not a brick, your phone still powers on
B) if you were rooting, you should have enabled USB debugging before attempting to do so, so when you turn your phone on, plug the USB in and use adb from the android sdk to get into download mode. "adb reboot download"
Click to expand...
Click to collapse
Might as well be a brick. The root went fine, everything was good till I deleting the settings file. What I am hoping for is a way to force mount the internal memory if possible and cut and paste the back up copy in.
you just need to go through the various methods to get into download mode.
pull battery -> Pull sim card -> Insert battery -> hold power up and down while plugging in the USB with Odin already open
adb should work in recovery and likely where the phone is hanging during boot as well.
Sent from my ADR6300 using XDA App
hd779 said:
Might as well be a brick. The root went fine, everything was good till I deleting the settings file. What I am hoping for is a way to force mount the internal memory if possible and cut and paste the back up copy in.
Click to expand...
Click to collapse
if you have the setting.db file saved on your computer you can do an adb push.
I am not really sure of adb, I downloaded the android development kit, and it told me I needed the Java SDK, so I downloaded and installed that. But the development kit tells me Java is not installed.
hd779 said:
I am not really sure of adb, I downloaded the android development kit, and it told me I needed the Java SDK, so I downloaded and installed that. But the development kit tells me Java is not installed.
Click to expand...
Click to collapse
I am assuming that you are on a 64bit windows.
the android sdk installer is looking for the 32bit version of java, so go download and install the java jdk/sdk for 32bit windows.
I am not able to put my phone into debug mode will adb still work?
Also do you have to be in debug mode for Odin if so then I guess I am really screwed.
You do not need to have it in debug for odin and adb is enabled in recovery regardless of debug setting.
Well that is very good to hear, now if I could only get into recovery mode.
Well good news, I followed this dude's tutorial and am back. Thanks for all the replies guys.
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Related
I really don't know what to do i'm so lost and i've been crying for an hour over this
i clicked "mount" "unmount" on my phone and did super one click http://forum.xda-developers.com/showthread.php?t=803682 and then it said waiting for device i took out my usb cord and called it quits but now my phone browser wont work i have a samsung galaxy S G4 and i need my phone browser for a lot of things even work and its pretty much the only thing i use my phone for and its making me cry so bad what do i do im so confused my boyfriend said he'd help me but he didn't not at all he doesnt even care
so i mounted my sd card when i wasnt supposed to but i dont know how to fix it
do i erase all the data from my sd card?
Root...
hello.
I have a LG Swift 2.1 but want to 2.2 or 2.3
but the computer does not detect my phone via usb cable
drivers installed and nothing
I do not have access to Superuser
I can not get into SetCpu
what to do?
Try downloading another internet browser from the market like skyfire or dolphin and if that doesnt work ONLY and ONLY then do the steps below
0.BACKUP
1.Pull out your battery and put it back in.
2.Press VOLUME DOWN+CAMERA+POWER and wait till the Samsung sign goes away.
3.You should see a screen with either blue or green text if not repeat the above.
4.Use the volume buttons to navigate to where it says factory reset or something similar (I have a custom recovery on mines and it looks different so it might not be those exact words_.
5.Press the power button (dont hold) to select it then wait for it to finish then restart the phone.
6.Remember when I said back up above. This is where it comes handy just put back everything you had before. *****Dont blame me if you didnt back up and lose all your data************
Here is another way thats easier but the above method is recommended.
1.make sure the phone is on (I like exact instructions and im sure other people do too)
2.press the menu button.
3.Press on settings.
4.scroll down to privacy settings and select it.
5.press factory reset device.
suraci said:
hello.
I have a LG Swift 2.1 but want to 2.2 or 2.3
but the computer does not detect my phone via usb cable
drivers installed and nothing
I do not have access to Superuser
I can not get into SetCpu
what to do?
Click to expand...
Click to collapse
First of all for the computer part did you make sure you have usb debugging off it could also be your usb cable or usb cable port or the computer but there is a way around if your phone came with a micro sd card adapter if not you should really go buy one it saved my butt many times when getting stuck just put the micro sd card into the adapter and put the adapter into the memory stick slot on the computer.
*If the above didnt work to fix the usb method try a different cord and if that doesnt work dont go on just stop reading otherwise you will waste your time.*
Now for the SetCpu,and superuser are you rooted or did you just download superuser from the market,If your not rooted you should download z4root from 4shared.com or Super One Click root from the file attached below, extract and run it.*make sure usb debugging is on settings->applications->Development->usb debugging
If you are rooted try re-rooting(you dont have to unroot) using the above.
Hi all you wizards,
I had this now brick rooted and jiggling around it with uninstalling some preinstalled apps, but when I attempted to replace some fonts which was my main goal, it turned out that it was not really rooted!!! probably the rooting method and app was malicious. Then none of the apps could fully root it. Z4root followed by Superoneclick and Universalandroot have been tried, no chance but slow and unstable device. finally I decided to master reset. After this, a strange virus like fake warning sticks to the screen saying the battery cover is open and asking to restart! when I really open the cover another warning comes up that battery cover removed. phone is working in background. It responds to USB connection, even detects an update of ROM I copied to solve the problem but no chance.
Has anybody any idea to get it back to life by using PC as there is no direct interactions with the phone coz of the virus?
basically I prefer to get rid of the virus through SDK and ADB if possible although I am a mushroom and Dono how.
Is it possible to wipe off some infected data or I have to wash out all the ROM and install a new one?
I have another phone handy exactly the same thing, should I copy all data from other one to this one or the update version of original ROM would work?
it is Garmin Asus A50 nuvifone with built in full GPS and navigator; 256 ROM, 256 RAM, 600 MHtz CPU, ARMv6, android 2.1 update 1
Thanks so much in advance for any participation even your experiences without useful result
here is some more information about the matter;
I needed to install some fonts for other languages which are not supported by android
So I tried to use information and files to get my device rooted and replace some fonts in system/fonts directory and some files in system/lib directory to use other languages in my android.
1- I started with Z4root , I downloaded through device and installed it, and I uninstalled my antivirus as it always said it is not safe, so I activated USB debugging and then permanent root and I had the super user. I installed some apps and used them to uninstall some preinstalled app and similar issues. When I tried to replace fonts and files, my file explorer with root ability, it said I don’t have enough authorization or something to access the file, I tried more root file explorer but same result, even a root checker said my device is not rooted!
2- Then I tried UniversalAndroot-1.6.2-beta5. Again I downloaded it through my device browser but it could not help as it said fails! I thought it is because of Z4root so I uninstalled Z4root but failed to root again.
3- I wanted to use pc method and root my phone by PC, even though this method was for android ginger bread and not my brand but as much as tried, my device did not show a recovery mode in start up by pressing power button and volume key but when I pressed middle key of arrow keys went to safe mode. so I ignored it.
4- Finally I downloaded the oneclick app through my device from the net. It was a zip file with so many files and super user, I just installed superuser but not helpful to replace font, then uninstalled.
5- Again installed Z4root but my phone was freezing and unstable so decided to master reset to factory setting. I did it once but after reset, nothing changed so I did it again. This time a warning sticks on the screen says;
” close the battery cover, and restart the device to complete first time set up.”
and asks for restart.
There should be something wrong as when I really open the battery cover, another warning comes up and says; battery cover removed!
Phone is working in background, even I copied a factory update of my ROM and its been detected but the crazy warning does not let to do anything but restart!
Now I need help to show me how I can use my PC to reset my device as upon a usb connection it asks for interaction and lets me to work via usb cable, and then how I can go to recovery mode in start up?
Otherwise it is a brick, lol
it does not let me to do any interaction cause of the crazy warning. it asks for restart, thats all I can do, or other warnings like asking to do update or usb connection option or battery cover removed, but no more. it means I can not activate usb debugging if needed or follow update process through mobile UI. besides in this kind of phone there is no recovery mode but just something like "USB polling mode" and "safe mode." the warning is in safe mode too and I dono how to use "USB polling mode".
however the only option is ADB, and I do not have an backup of the rom but another simillar phone to make copy or the update file, if possible to copy them via ADB which I am dono how; like which commands and where to copy them?
honestonline said:
it does not let me to do any interaction cause of the crazy warning. it asks for restart, thats all I can do, or other warnings like asking to do update or usb connection option or battery cover removed, but no more. it means I can not activate usb debugging if needed or follow update process through mobile UI. besides in this kind of phone there is no recovery mode but just something like "USB polling mode" and "safe mode." the warning is in safe mode too and I dono how to use "USB polling mode".
however the only option is ADB, and I do not have an backup of the rom but another simillar phone to make copy or the update file, if possible to copy them via ADB which I am dono how; like which commands and where to copy them?
Click to expand...
Click to collapse
same situation, no solution ???
ogabic said:
same situation, no solution ???
Click to expand...
Click to collapse
solution for this?
http://kazzi.net/tips-tricks/revive...r-deadly-close-the-battery-cover-message.html
found this but dont know how to adb .
but for sure on giving a missed call and following the idea in link u can use the phone but annoying error wont go away
I have the same problem but I cannot receive calls
Hello
A couple days ago I got a Garminfone from a friend, I use it mostly as a GPS only, because T-Mobile does not have any coverage in my country and I don't have the unlock code.
Yesterday I wanted to make a hard reset to start over, holding the D-pad left while powering on the phone, **WIPE USERDATA** appeared on the screen.
Everything was fine until it restarted, after the restart it showed the following warning: "Close the battery cover, and restart the device to complete first-time setup", the battery cover is closed and it does not let me do anything, the official ROM update does not install and If I do another hard reset the error persist and the phone does not make or receive calls.
Before this issue I got it rooted using z4root
Is it there anyway to update the device without using the update launcher from the phone?, or reinstall the 2.1 update using the usb cable via command prompt or any tool?.
I just want to get rid of this error and keep using the device as a regular GPS
Anyone can help?
I really appreciate any help you can provide.
Just wondering what is the best method to root a Samsung replenish. Thanks
Sent from my Desire HD using XDA App
I'm wondering the same. I've tried using rageagainstthecage, gingerbreak and psneuter. The first makes the phone vibrate alot. The second just sits there and the third looks like it runs comlpetely but still no #. Anyone tried anything else?
Edit: z4root causes the constand vibrate. rageagainstthecage kills adb and adb will not recognize my device until I reboot the phone.
have you guys figuered out how to root the replinish yet??
I'm still trying. I don't think anything out there right now is going to work without doing some coding and I'm not a coder. Anyone know what irc channels I can hit up for some tips on the android exploits used for rooting?
This may help or not get closer to root.
To boot into Android Recovery Hold U down while powering on....or do 'adb reboot recovery' (requires android sdk tools)
If you hold down Q while powering on you get some verbose output instead of the first www.samsungmobile.com screen.
If you power down then hold Q while you plug in you charger you'll get some verbose output on right below the battery icon.
Bootloader appears to be Little Kernel based. Anyone have experience with that?
you guys think Gingerbreak might work?
bump ttt....
More and more of these phones out there... anyone? They sold like 10 of them at the best buy store I work at today...
Bigjohn_S said:
More and more of these phones out there... anyone? They sold like 10 of them at the best buy store I work at today...
Click to expand...
Click to collapse
I have my replenish rooted, here's the files.
Extract KMS.zip
Remove SD Card
run PrevailToExistence.bat
Done
KMS will root this phone, run the bat and follow the directions, after you unmount the sdcard and enable usb debugging its best to reboot the phone. seems to have teh highest success
http://www.holylivingfuck.com/Crap/Prevail/KMS.zip
freakb18c1 said:
I have my replenish rooted, here's the files.
Extract KMS.zip
Remove SD Card
run PrevailToExistence.bat
Done
Click to expand...
Click to collapse
I'm new to this, so let me see if I have this process down:
I hookup my Replenish to the PC without the SD card.
I transfer PrevailToExistence.bat to the device (where/which folder)?
I run the file within the device.
Is there anything else that needs to be done to root the device that most people would have already assumed to do?
freakb18c1 said:
I have my replenish rooted, here's the files.
Extract KMS.zip
Remove SD Card
run PrevailToExistence.bat
Done
Click to expand...
Click to collapse
Unfortunately this did not work at all for me. I have the drivers correctly installed because if I put an SD card in, I can read/write to the sd card from my wife's replenish. I did remove the SD Card before trying this & USB Debugging was enabled. This is the screenshot of what came up. Also why is it that this says its for the Samsung Prevail? Does this batch file also work for the replenish? Anyway take a look at the screenshot & tell me what I did wrong because I followed the above instructions with no success.
UPDATE*** I ran the batch file & rebooted the phone when the batch file said "waiting for phone to reconnect" while it was rebooting, the batch file continued to run and failed........BUT, after it rebooted, I ran the batch file again never disconnecting the phone and I finally had success. Thank you for this method but more detailed instructions would have made this as easy as it really is. Thanks.
freakb18c1 said:
I have my replenish rooted, here's the files.
Extract KMS.zip
Remove SD Card
run PrevailToExistence.bat
Done
Click to expand...
Click to collapse
I just tried your method, and was unsuccessful, I had my card unmounted, usb was in debug mode. maybe there was something else you had to do?
update: I pressed space to continue as I powered on my phone, and it worked fine, many thanks to everyone!
Worked on a coworkers Replenish, here's what I did to make it work:
0. Did not install drivers (I already have samsung captivate drivers and samsung transform drivers from rooting previous phones, so the phone was already recognized)
1.Unzipped KMS.zip on my computer.
2. Put phone into USB Debug mode. Plugged in USB cable.
3. (Phone is currently on) Removed SD card.
4. Ran bat file.
5. Received errors identical to those screencap'd by PRBajista above.
6. Powered phone off (left it plugged in).
7. Powered phone back on.
8. After the boot logo, but before the lock screen came up, I ran the bat file again.
9. Bat file ran sucessfully, phone rebooted by itself and was rooted.
I'm guessing the correct process for rooting this phone is to do exactly what I did (install drivers for step 0 if you don't have already), except skip step 4 and 5.
seems very coordinated... what if I have bad reflexes? (in other words, no other way to root?)
D
Its pretty easy push the power button in thenphone and hit the spacebar about 5-10 seconds later
Sent from my Desire HD using XDA Premium App
Working on my Replenish too!
ch1pn3ss said:
Worked on a coworkers Replenish, here's what I did to make it work:
0. Did not install drivers (I already have samsung captivate drivers and samsung transform drivers from rooting previous phones, so the phone was already recognized)
1.Unzipped KMS.zip on my computer.
2. Put phone into USB Debug mode. Plugged in USB cable.
3. (Phone is currently on) Removed SD card.
4. Ran bat file.
5. Received errors identical to those screencap'd by PRBajista above.
6. Powered phone off (left it plugged in).
7. Powered phone back on.
8. After the boot logo, but before the lock screen came up, I ran the bat file again.
9. Bat file ran sucessfully, phone rebooted by itself and was rooted.
I'm guessing the correct process for rooting this phone is to do exactly what I did (install drivers for step 0 if you don't have already), except skip step 4 and 5.
Click to expand...
Click to collapse
Yep, worked perfectly for my replenish too--I simply had to get the samsung drivers and then run the program right as the samsung logo came up after rebooting.
QUESTION: Anyone know how to UNROOT the Replenish?
Worked for me!
First try, very easy thanks for posting this!
Good Point
panamaniac said:
Yep, worked perfectly for my replenish too--I simply had to get the samsung drivers and then run the program right as the samsung logo came up after rebooting.
QUESTION: Anyone know how to UNROOT the Replenish?
Click to expand...
Click to collapse
I agree....I wont do a root until I know there is an unroot method that works. Anyone know of one?
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
droidmark said:
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
Click to expand...
Click to collapse
Hi - Would really appreciate your help here. Thanks for the tip on turning debugging off to get to the phone so I could install the USB drivers. Problem now is that ADB just refuses to connect to it. It shows up asa disk drive in Devices, but when I do a kill-server then start-server then adb devices, it doesn't list any devices, and an adb shell just says device not found.
Do I need to reboot Windows, or the phone? Seems unlikely. I can open a window to the phone, but can't get access to install the Gingerbreak and su files I need to root it. Going crazy!
Thanks,
Eric
Try rebooting both. Couldn't hurt.
Oh yeah, and if you haven't make sure the phone is back in debug mode.
Sent from my SCH-I510 using XDA App
Black-Falcon said:
Try rebooting both. Couldn't hurt.
Oh yeah, and if you haven't make sure the phone is back in debug mode.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Well, I'll be a monkey's brother in law. I rebooted both, checked debig mode - and it wasn't on, to my surprise. I've turned it on and off a bunch of times, so...
Anyway, I was able to finally get adb working!!! Yaaaayyy! But now I'm trying to root it, and Superuser doesn't show as an app, and Root Explorer says the f-er isn't rooted. And the Gingersnap Root Utility I've been trying to use, says it's all good to go, but its not.
Gonna try a different method, but if anyone has any ideas, I'm open.
Thanks!!!!
Use gingerbreak.
You gotta download superuser from the market
Sent from my SCH-I510 using XDA App
ClarkSt said:
Well, I'll be a monkey's brother in law. I rebooted both, checked debig mode - and it wasn't on, to my surprise. I've turned it on and off a bunch of times, so...
Anyway, I was able to finally get adb working!!! Yaaaayyy! But now I'm trying to root it, and Superuser doesn't show as an app, and Root Explorer says the f-er isn't rooted. And the Gingersnap Root Utility I've been trying to use, says it's all good to go, but its not.
Gonna try a different method, but if anyone has any ideas, I'm open.
Thanks!!!!
Click to expand...
Click to collapse
Try downloading busybox from the market, or downloading titanium backup and hit the "problems" button when you open it and select get busy box
Black-Falcon said:
Use gingerbreak.
You gotta download superuser from the market
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Tried GingerBreak. No good. "permission denied".
Good idea - I got Busybox installed this way, but still no joy from Gingerbreak.
Just flash the ED1 odin package and done
Sent from my SCH-I510 using XDA App
DroidXcon said:
Just flash the ED1 odin package and done
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
If I could flash anything I'd be rooted already, wouldn't I? How do I flash? ROM Manager needs root. Vicious circle.
I've heard that its not possible to root the Charge using current methods since the f-ing update the other day.
ClarkSt said:
If I could flash anything I'd be rooted already, wouldn't I? How do I flash? ROM Manager needs root. Vicious circle.
I've heard that its not possible to root the Charge using current methods since the f-ing update the other day.
Click to expand...
Click to collapse
Check the development thread for the Charge. There's a thread on how to rollback to ED1 with root using Odin.
Edit: Direct link: http://forum.xda-developers.com/showthread.php?t=1085190
droidmark said:
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
Click to expand...
Click to collapse
Dude - THANK YOU!!!! I could not get those drivers to install!!!
Please - Stickie!!!
If you want the drivers and don't trust the sources posted anywhere (we're not trustworth ?) you can get them from the phone itself. They are located in the file /system/etc/autorun.iso and you can extract them from it.
Alrighty. Im pissed. But not at the Dev's...
I have been trying to root my Verizon GS5 on 5.0 BOK5 (OK5) for about 3 hours now.
When I run the root.bat i get this message/error:
"adb is not recognized as an internal or external command"
then the instructions
Press any key to continue...
So i press enter to continue and it pops up saying it can't find Odin.exe. I click OK and it runs again, can't find Odin.exe.
I have tried:
Downloading Odin separately
Reinstalling the drivers twice
Installing Android Studio SDK (to try to fix the adb error)
Running as administrator
Agressive Googling alternative methods
Crying inside
Re-Extracting the downloadable folder
Using the root2.bat file included and following all THOSE instructions which give me the same 2 errors.
ANY ideas? Please? Im f*cking dying here.
Just going out on a limb here. Do you have Andy or Blurstacks installed? If so, remove them. Have you tried to going in developer mode and revoke USB Debugging and reselect it and verified that the PC Authorization popped up on your phone.you tried a different PC because I've read where GeTex and others used another PC due to issues with rooting. Oh, have you turned off reactivation and checked the MD5 of your download(s).