Database Info

[ROM][Alpha Dev Only][CM7] Hisense E910 EVDO

I marked it `Dev Only` because it is at the very early stage, almost nothing works.
Current Status:
Green: works
Blue: works, but has bug
Red: don't work
Orange: work in progress
Screen
Keyboard
Backlight
Keyboard backlight
Sound
Vibrate
3-axis accelerometer
Voice phone (CDMA)
SMS
USB: USB modswitch, only work when first plug in after phone boot
Network: CDMA1x
Network: EVDO(3G)
Camera
WIFI
GPS
Graphic 2d hardware accelerator
Graphic 3d hardware accelerator
3-axis Electronic Compass
Light and Proximity Sensor
Detail
It is a qcom msm7627a phone, almost everything use caf as code base without change.
Camera
We need libcamera.so, which can be built from qcom libcamera2, but the required header is missing.
Network
Need to port RILJ cdma part to CM7, which is already merged into CM9, we need backport it to CM7.
USB
There are four modes controlled by /sys/devices/platform/msm_hsusb/gadget/usb_switch, write the corresponding magic number to this file will change the mode.
Charge mode (0): no usb function
Storage mode (f000): ADB + mass storage, the same as other android phone
CD-ROM mode (f009): ADB + CD-ROM containing drivers for windows
3G mode (9114): ADB + 3G moden
ADB over USB:
Windows
Install the official USB driver
Linux/OSX
http://stackoverflow.com/questions/7135999/adb-not-finding-my-device-phone-macos-x
Enable 3G mode in the official ROM on Linux:
3G mode can be mode-switched from CD-ROM mode in the official ROM http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?p=6023
Source
https://github.com/kghost/android

thank you waiting for your release.

Nice work...I will be wait for the rom to be released.

Waitinggg!!
Sent from my HS-E910

Wow.. keep up good work dev
Sent from my HS-E910 using Tapatalk 2

Wiw, thank for dev. CUrrently waiting on this ROM.

Waiting also

Is still any progress?

Sorry, I'm a little busy recently (with diablo3), but it is still under development

Any update? B-)
Sent from my HS-E910

thanks,,,any update?

waiting............
thanks...................

Any progress?
Sent from my HS-E910

Asking Dev
I'm Curious about this Development... is it any updated? or is it stops??

[Q] Can't enable MTP in CM10 NS4G

Not sure if there is a problem with my device or if the feature has even been implemented, but when I try to enable the MTP option under Settings>Storage>USB connection - it doesn't work, it just switches right back to USB Mass storage.
Here is a logcat of the event
Code:
E/UsbDeviceManager( 276): waitForState(mtp,adb) FAILED
E/UsbDeviceManager( 276): Failed to switch persistent USB config to mtp,adb
I/dalvikvm( 3933): Total arena pages for JIT: 18
E/UsbDeviceManager( 276): No known USB function in updateUsbNotification
I/StorageNotification( 419): UMS connection changed to false (media state mount
ed)
D/PhoneStatusBar( 419): addNotification score=-10
E/UsbDeviceManager( 276): No known USB function in updateUsbNotification
I/StorageNotification( 419): UMS connection changed to true (media state mounte
d)
I/StorageNotification( 419): UMS connection changed to true (media state mounte
d)
If anyone can offer any info or help I'd much appreciate it.
Edit: just saw that the Nexus S has a Q&A forum, news to me, if a mod comes through please move thread if thought appropriate.

You need a kernel with mtp support. The CM10 kernel doesn't. Try Marmite in the Nexus S 4G dev section
Sent from my Nexus S 4G using Tapatalk 2

I'm using it myself it works perfectly. I'm honestly surprised it took this long for someone to finally build a kernel for ns4g with mtp. i've been waiting for it myself...I find it much easier!!

Thank you much, flashed the kernel you recommended(which seems to be pretty great all the way around) and I have MTP.

hp420 said:
I'm using it myself it works perfectly. I'm honestly surprised it took this long for someone to finally build a kernel for ns4g with mtp. i've been waiting for it myself...I find it much easier!!
Click to expand...
Click to collapse
Yeah, I have a dock and it charges and works great as a desk clock, and with MTP it can always have a data connection to my computer.
Here are some crappy pics
http://minus.com/lbkYoQQTj20cak
http://minus.com/lXr5oZss4pwjp

Glad you found the kernel and mtp working fine for you.. Marmite is a fantastically stable kernel. And the developer bedalus is a really nice and engaging developer..
And yeah.. MTP > Mass Storage.. Soon as I saw marmite had MTP I jumped on it like hot cakes..
Edit: I had that dock and returned it.. If a light breeze hit it the volume buttons would be pressed because the little groove wasn't recessed correctly.

I'm now running 10.1 and MTP seems to have been removed from CM entirely. Anyone know if there's a way to enable it if you have an MTP enabled kernel? Or do we need to wait for CM to put some code in to support it in the ROM?

USB mode switch for SGS1 on CM
koeylondon said:
I'm now running 10.1 and MTP seems to have been removed from CM entirely. Anyone know if there's a way to enable it if you have an MTP enabled kernel? Or do we need to wait for CM to put some code in to support it in the ROM?
Click to expand...
Click to collapse
Search google play and download "USB mode switch for SGS1 on CM" (needs root).

[DEV][WIP] Jelly Bean / CM10.1 (4.2.2) Alpha 2 - 3.1 kernel - Last Update 30.05.2013

Android 4.2.2 / Jelly Bean for Toshiba Folio 100
This is the current state of CyanogenMod 10.1 for the Toshiba Folio 100
READ THIS:
This version used a different partition layout from all previous ROMs. The /sdcard partitions is now emulated on the /data partition like on all current ROM's.
All your data will be lost when updating to this ROM. You will also have to reformat the /data partition our you will have issues.
If your device should not boot after formating the partion and flashing everything then go to recovery and format the data and media partition again.
DOWNLOAD:
Alpha 2:
cm-10.1-20130530-UNOFFICIAL-betelgeuse.zip
MD5: c368ffb6330f469032c49b39ce78f233
Changes:
* Fixed 3G connectivity
* Upsteam CM fixes
Alpha 1:
cm-10.1-20130217-UNOFFICIAL-betelgeuse.zip
MD5: 0239505b69312c082b70404c2f839ca9
Recovery:
recovery-cwm-CM10.1.zip
MD5: 50ea4efaf05a2c5ba61cf92c406788a7
GOOGLE APPS:
Please download the last non-neon gapps from here:
http://goo.im/devs/tonyp/non-neon-gapps
SOURCE CODE:
The git tree is here:
https://github.com/DerArtem/android_device_toshiba_betelgeuse
https://github.com/nopy/android_device_toshiba_betelgeuse
Kernel sources:
https://github.com/DerArtem/android_kernel_toshiba_betelgeuse
Things that work:
Kernel 3.1 - rel-15r7
HQ Video acceleration
Audio over Speaker
Audio over Headset
Audio over HDMI
HDMI Video
Camera - reported as front and back camera
3D acceleration
LP0 Suspend
Wakeup from LP0 Suspend
Internal USB
USB Host Port
Acceleration Sensor
Power Button
Volume Keys
Touch Screen
Wifi
Brighness regulation
Internal and external SD
Vibrator
miniUSB Hotplug
Docking station
Audio jack switch
Internal microphone (sound is little quite yet)
Touch Buttons
Voice and Data connections using Huawei 3G dongles (UMTS only)
Things that don't work yet:
Bluetooth
A2DP Audio over Bluetooth
SCO Audio over Bluetooth
Digital Compass (Android lib not finished yet - Kernel part finished)
Remote control - initial support added - need more inventigation
Power cable plug detection can take up to 10 seconds
Device may hang during reboot / shutdown - long press the power button to shut it down
Installation:
Install the correct recovery using fastboot or zip file.
Copy everything on the the SD card and install the ROM using the recovery.
You must do a full wipe and format the data and media partition (/sdcard) before installing the ROM using CWM recovery.
Do a full wipe before installing this ROM the first time.
Credits:
DerArtem
Nopy
The Cyanogenmod Team
The other Tegra Dev Teams where we have borrowed code (Adam, GTab, Vega, AC100)
And everybody else who I might have forgotten.
If you like this ROM please don't hesitate to hit the donate and thanks button.
The build target for Folio 100 was submitted upstream to Cyanogenmod:
http://review.cyanogenmod.com/#/c/22586/

RESERVED

Awesome, I'll try later today.

Did I miss something ?
Where are the files to download...

dot251 said:
Did I miss something ?
Where are the files to download...
Click to expand...
Click to collapse
I can´t see it too

maybe it's a early easternegg

Good job.
As I see we will have some new updates to our Folio 100. Keep it up.

Sorry, had some troubles with file hosting, as hosting on github is not possible anymore. The files are available now.

thanks, for this download and for this job, !

Thanks DerArtem, Downloading......

Great! Thank you.

Can we change the status bar? I like the old one...

why is it notcould it be running in tablet mode by default?
wake-up sometimes does not work (especially after plugging USB)
keyboard crashes(hides) when typing fixed after reinstall
Oh and thanks o (◡‿◡✿)

Nice work !!
It's a nice rom !!
The rom works smooth.
Also panorama photo works with external cam !!
DEMO of the rom: http://www.youtube.com/watch?v=qz4fNxZkAYo
DEMO of multiple users : http://www.youtube.com/watch?v=hHnKA4BJ83c

Only one word : great
Thanks very much for this 3 years of work, always better and, safe my folio...

Goo.im server Offline! Could upload on Dev-Host?? Thanks
Ok...working again!

Hello DerArtem,
As usual, very good job. The rom is smooth and very responsive. Navigation is as smooth as Nexus.
I hide the navbar since physical buttons still work (expandable desktop). To replace it, Deskbar is good.
The multi-user works very well I configure with Multi-User App.
I did some tests:
AnTuTu: 6369
High quality FPS: 40.4 on Epic Citadel
Played GTA VC, The Bard's Tales but Jet Set Radio did not seem to get started.
The partitioning is great. This is better than 4.1.2, great! We have all the internal storage for data.
The wifi was temperamental in the first start, but he looked into now.
But I often SOD.
It's great to see that you continue to work on Folio. Thank you very much.
Good luck for the future.

USB 3G dongle doesn't work. I have a huawei K3715. In Android 4.1.2 is it working. It is strange I can find nortwork providers and also connect but the internet doesn't work. He said that i'am connected with Proximus (My provider in Belgium). But internet is not working.
Can anyone help me? Or ist it a bug DerArtem?
Sometimes my folio don't wake up from hibernate.
But it is a good rom for the begin of android 4.2.2 !!
GO DerArtem !! You can it.

I read that CM does not have and does not support Tablet UI. It damage not to find the status bar and notification bar in the navbar. It's more convenient, you can expect a small patch homemade?
Otherwise, I tried the 160 and 213 dpi, it works.
PS : The Google translation makes me very scared.

probleem with power button. folio doesn't wake op after 10 seconds or more.
keyboard disappears after keypress. I don't no how to swipe correctly.
perhaps we need a detailed instruction how to wipe the memory completely and further installation, like the one in version 4.1.2
did a reinstall of 4.1.2 and will wait for the next version.
12/3: had to install 4.2.2 again. same problems but found some workarounds. for the keyboard i disabled the automatic text correction. no more sod after installing advanced wifi lock. this way 4.2.2 is great.

Mk808b + usb gps

Hi All, has anyone had any success in getting android devices such as the MK808B to work with external GPS devices such as the Prolific PL2303? Desperately trying to find a way to support it so that I may use one to make a car PC. So if anyone can help / advise me how to install drivers and get it recognised in copilot I would be extremely grateful. Thanks
Dave

hotrodder said:
Hi All, has anyone had any success in getting android devices such as the MK808B to work with external GPS devices such as the Prolific PL2303? Desperately trying to find a way to support it so that I may use one to make a car PC. So if anyone can help / advise me how to install drivers and get it recognised in copilot I would be extremely grateful. Thanks
Dave
Click to expand...
Click to collapse
Why not use a bluetooth GPS? £8 on ebay.

gloscherrybomb said:
Why not use a bluetooth GPS? £8 on ebay.
Click to expand...
Click to collapse
I did try this using my android phone and a few apps that share your phone GPS as a bluetooth GPS but couldnt get it recognized by copilot. Id definately be open to this if i can get it recognized in there. Currently im using an archos 80 G9 tablet as my car PC, but want to switch to this mini pc for better performance and a better mounting option for in the dash - so my aim is to get GPS and a HDMI / USB touchscreen (such as an egalax screen) working. Then its a go. Ill then probably turn my hand to application development (my day to day job) to come up with the best option user interface wise and will happily share all the information and software i develop with the community.

MK808B + CoPilot (GlobalSat BT-359)
I am able to use MK808B + CoPilot (GlobalSat BT-359) with the help of a mock GPS provider app (Blutooth GPS). GoogleMaps \ Sygic are both working perfect.
I am also looking for a HDMI/USB touch screen for it, any update on this?
hotrodder said:
I did try this using my android phone and a few apps that share your phone GPS as a bluetooth GPS but couldnt get it recognized by copilot. Id definately be open to this if i can get it recognized in there. Currently im using an archos 80 G9 tablet as my car PC, but want to switch to this mini pc for better performance and a better mounting option for in the dash - so my aim is to get GPS and a HDMI / USB touchscreen (such as an egalax screen) working. Then its a go. Ill then probably turn my hand to application development (my day to day job) to come up with the best option user interface wise and will happily share all the information and software i develop with the community.
Click to expand...
Click to collapse

I plan to get one of these once the GPS side of things is working, so ill crack on and try what you suggest. Thanks
http://www.ebay.co.uk/itm/110659968637?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Ok, got a copilot branded BT GPS device, and its recognised and seems to be working with some apps - but not the one i want the most, copilot. It just states its unable to register for GPS updates, which sucks!

hotrodder said:
Ok, got a copilot branded BT GPS device, and its recognised and seems to be working with some apps - but not the one i want the most, copilot. It just states its unable to register for GPS updates, which sucks!
Click to expand...
Click to collapse
I have one of these: http://www.amazon.com/Dual-Electron...p/B006M49G80/ref=sr_1_2?ie=UTF8&qid=136138107
I use it w/out issue w/Google Maps, so I'll drop co-pilot on and see how it works out.
The rest of my CarPC setup:
http://www.m3post.com/forums/showthread.php?t=806078

whats77inaname said:
I have one of these: http://www.amazon.com/Dual-Electron...p/B006M49G80/ref=sr_1_2?ie=UTF8&qid=136138107
I use it w/out issue w/Google Maps, so I'll drop co-pilot on and see how it works out.
The rest of my CarPC setup:
http://www.m3post.com/forums/showthread.php?t=806078
Click to expand...
Click to collapse
I contacted the makers of Co-pilot and they said they dont support external GPS receivers. I have both the bluetooth and USB receivers but I think for co-pilot to support them I'd need to get to be recognised as the inbuilt GPS receiver. Co-pilot tells me its unable to register for GPS requests - but other apps _seem_ to work, but currently all my testing is done on a PC monitor, so its hard to hit the road and see if its actually working. I currently have an archos G9 80 built into my Jag XK8 and im so pleased with the functionality - but not so much with the GPS support (can be hit and miss) and with the mounting. Prior to that i had a windows PC, but that was much worse of an installation.

Android on W1-810

This is a windows tablet, but I think it would be cool to have this run android as well, so I tried a few emulators running under windows 10, but they are very slow, unstable or didnt run at all. Doid4X, an Nox worked, Andy refused to start).
I kept the Nox App Player, cause that was the one I found most responsive of these.
Perhaps the fact that they barely meets the minimum RAM requirement is a major cause for it being slow.
Then I decided to try the android-x86, which is not an emulator, but an andoid port to x86, and will run natively.
The Lollipop EFI image does work as a live usb media , and I was able to install it to another usb stick, but that got stuck on the aandoid logo when booting. The 4.4r3 EFI image did work better, and was able to install to a second usb stick and boot up into android.
I must say that android-x86 did impress me. It feels quite quick and responsive, and any app I have tried so far does run. Even MineCraft PE works well. The display and touchscreen works well, and volume buttons works.
There are a few driver related issues though, here is a list of some things not working:
- onboard wifi
- onboard Bluetooth
- Sensors (auto rotate will not work)
- Audio out and mic
- Power button
- Battery status
- Camera
I did a few tests, and as a workaround I did use an external usb wifi adapter to get internet working. Also connecting a usb headset with mic did work fine, external keyboard. Also a non branded bluetooth adapter was accepted and the BT icon was enabled, but it didnt find any devices when searching. Even a logitech webcam did work with opencam.
Given the current state of andoid-x86 on this tab, it doesnt make sense to partition the disk to get a dual boot. But if there was working drivers for wifi and audio etc, this could be a decent android system.
Now the android version of the tab 8 looks quite similar to the w1-810, so that makes me wonder how much of the hardware components that are the same. And if it may be possible to get the drivers from the original android to work on android-x86.
I will try to list the hw configuration as I can read from devicemanager/drivers in win10:
wifi: broadcom 4330 / Sound: intel SST audio device / camera: Intel Imaging signal processor 2400 / Bluetooth: BCMBTBUS / Sensors: BMA2x2 ( BMA250E) / Battery control hardware ID is PNP0C0A
Any ideas on how to get these things working would be great.

forum administrators:
I did tag this thread with iconia-tab-8, but for some reason it will not show under "Acer Iconia Tab 8 Discussion" list.
Did I miss something, or doesnt the tag system work properly.
Is there anything I can do to fix this?

I also have this tablet and I am also eager for installing fully functional Android on it. Please guys help us on this. Thanks in advance.

News about Acer Iconia Tab W1-810 with Android
Hi guys, some new about it?