If someone could help me out with my problem it would be appreciated, i have a Samsung I5500 here that i need to revert back to stock, the only file i'm missing is the CSC file I5500OXAJK1, can anyone supply this file.
I have another i5500 here that has the file above (I5500OXAJK1 CSC file) installed, the problem is i have know idea how to extract this file from the phone, is there anyone that could explain how i can extract the file from the phone so it can be used in Odin.
Thanks!
Related
any1 have stock eb11 showcase galaxy s odin files, primarily the csc and phone file. i downloaded and put i9000 files along with the csc file and phone file for the i9000 on my i500 and now it only shows the download mode.
or, know how to get these files primarily the csc and phone file off another sch i500. my fiance and i have the same phones. so, if its possible i could just get the files from her phone and copy them to my computer?
bump please anyone?
I have a Samsung Galaxy Tab Plus Wi-Fi only GT-P6210 that I want to flash back to stock ROM using ODIN. I have found two packages at this thread. (I can't post to the following thread because I'm a noob)
http://forum.xda-developers.com/showthread.php?t=1367478
One package has only one file that I know is the PDA file. The other package has 3 files:
GT-P6210-MULTI-CSC-OXEKK1_RST.tar.md5
P6210_APBOOT_P6210XXKL2_CL583761_REV02_user_low_ship.tar.md5
P6210_CODE_P6210XXKL2_CL583761_REV02_user_low_ship_16G.tar.md5
The CODE file is the PDA file, correct?
The CSC file is the CSC file, duh.
What is the APBOOT file?
Can you also explain what the different files are? What is a CSC file? What is a PIT file? Why does the other package only contain the PDA file?
I've never ODIN'd before so I want to make sure I know what I'm doing and flash the correct package.
bdarc said:
I have a Samsung Galaxy Tab Plus Wi-Fi only GT-P6210 that I want to flash back to stock ROM using ODIN. I have found two packages at this thread. (I can't post to the following thread because I'm a noob)
http://forum.xda-developers.com/showthread.php?t=1367478
One package has only one file that I know is the PDA file. The other package has 3 files:
GT-P6210-MULTI-CSC-OXEKK1_RST.tar.md5
P6210_APBOOT_P6210XXKL2_CL583761_REV02_user_low_ship.tar.md5
P6210_CODE_P6210XXKL2_CL583761_REV02_user_low_ship_16G.tar.md5
The CODE file is the PDA file, correct?
The CSC file is the CSC file, duh.
What is the APBOOT file?
Can you also explain what the different files are? What is a CSC file? What is a PIT file? Why does the other package only contain the PDA file?
I've never ODIN'd before so I want to make sure I know what I'm doing and flash the correct package.
Click to expand...
Click to collapse
I have the same question my self but didnt know where to look... Hopefully you get an answer soon cause id like to know to, my tab got screwed up and i dont know how to get the original firmware back and no clue how to properly flash the odin with out screwing it up more, so hopefully this works
when i extracted the folder of samsung firmware to update my phone, in that folder there was no such .tar.md5 file only one file was there-S6012XXUMBK1 S6012OXXBMK1 EUR.zip_10924_i18924411_i1345.exe .now how do i get .tar.md5 file. plese help fast
some 1 plese help. plese tell me
Hi,
I need some help from someone with a rooted Samsung galaxy S6 with the 3 firmware (latest version)
I need the features.xml/others.xml file please.
Kind regards,
Sam
I will also need a copy of every file in the folder : /data/data/com.sec.imsservice/databases/
Thanks
Hope this might help someone here.
I rooted my s8+ and basically got stuck with a soft-bricked phone, telling me I could only use official firmware etc etc. I was able to get the phone into download mode (eventually) but I wasn't able to flash anything including the stock Pie rom. I spent all night trying to find a solution to no avail and then found this, which I've edited a bit. And it worked. I've now got my s8+ back with Android 9 on it without any bloatware and it's actually better than ever. Thanks to Krolik301 for your help. I'm just hoping this may help someone.
1. Download the stock ROM and extract it.
2. Make a copy of the CSC file and rename one from the file type .md5 to .rar
3. Extract the PIT file from the CSC .rar file.
4. In Odin v3.13, make sure you add all four files from the extracted ROM (BL, AP, CP and CSC).
5. Click the PIT tab and add the PIT file that you just extracted from the CSC.rar file.
6. I the Options tab of Odin, make sure that Re-Partition, Auto Reboot and F.Reset Time are all ticked.
7. Click Start and hopefully you'll be back to your stock ROM
And please don't hold me responsible for any loss of data or a phone that still won't boot.
Hope this helps someone. Happy Easter
Muddyfunk said:
Hope this might help someone here.
I rooted my s8+ and basically got stuck with a soft-bricked phone, telling me I could only use official firmware etc etc. I was able to get the phone into download mode (eventually) but I wasn't able to flash anything including the stock Pie rom. I spent all night trying to find a solution to no avail and then found this, which I've edited a bit. And it worked. I've now got my s8+ back with Android 9 on it without any bloatware and it's actually better than ever. Thanks to Krolik301 for your help. I'm just hoping this may help someone.
1. Download the stock ROM and extract it.
2. Make a copy of the CSC file and rename one from the file type .md5 to .rar
3. Extract the PIT file from the CSC .rar file.
4. In Odin v3.13, make sure you add all four files from the extracted ROM (BL, AP, CP and CSC).
5. Click the PIT tab and add the PIT file that you just extracted from the CSC.rar file.
6. I the Options tab of Odin, make sure that Re-Partition, Auto Reboot and F.Reset Time are all ticked.
7. Click Start and hopefully you'll be back to your stock ROM
And please don't hold me responsible for any loss of data or a phone that still won't boot.
Hope this helps someone. Happy Easter
Click to expand...
Click to collapse
Hello. I'm helping someone on discord with this exact issue (the error code is "can't open the specified file (line 665)". I extracted the PIT file from CSC and placed it into the PIT file. I also put all of the firmware files in their proper place (except for HOME_CSC, as he wants to keep his files). Do I absolutely have to put the CSC file in place of the HOME_CSC file?