Hi All,
I flashed MSD Clean [Old GUI] Win Mobile 6.5 ROM which is available in the below link
http://forum.xda-developers.com/showthread.php?t=564002
But now i cannot receive files though bluetooth, i can send file.
I was using windows mobile 6.1 and bluetooth was working gr8...
I searched a lot but no luck; I did all the below steps:
1. Check beam is ON and Receive Incoming connection is checked
2. Installed Adv Config tool and enabled OBEX
3. Checked Obex Inbox, and changed the path to different folders.
4. Enabled Obex in registry HKLM\Software\Microsoft\Obex
5. Enabled ftp explorer in bluetooth settings.
6. Tried pairing the other phone but while connecting it says "Cannot connect, passcode failed"
But i am able to send files, also connect to active sync through bluetooth. I have heard that cooked ROMs have such issues, is there a patch or config to get it working.
Please hel
Related
Hi
HTC 8125 uses MS BT Stack. I downloaded the WM6 OS from here:
http://forum.xda-developers.com/showthread.php?t=324632&highlight=wm6+radio+wizard+download+lite
Is there any way to enable File transfer? I have installed the Widcomm Bluetooth Stack, but it doesn't support the Dial up network, so it's stepping backwards (furthermore: it takes 8MB of precious ROM!)
Can someboy please help me out?
Who say that MS BT Stack does not support File Transfer...
To send a file through Bluetooh, use the same method as Infrared send and you will notice Bluetooth devices in the list.
To receive a file, enable beam receiving option (The Infrared one) and it will receive files through bluetooth automatically.
Download Total Commander 2.5 public beta 3.
It has Send over Bluetooth option.
Good luck.
No more is needed!
Oh my lord! You're insanely right.
For sending files Over Bluetooth, use Total Comander
For receiving files Over Bluetooth, enable the "Receive all incoming beams" option in Settings \Connections \Beam
Thank you
starkwong said:
Who say that MS BT Stack does not support File Transfer...
To send a file through Bluetooh, use the same method as Infrared send and you will notice Bluetooth devices in the list.
To receive a file, enable beam receiving option (The Infrared one) and it will receive files through bluetooth automatically.
Click to expand...
Click to collapse
Hi,
i have a problem with my MDA I can send via BT but cant receive, the other device see my in the list but sending failed hapens
also via IR cant send/receive....???
kris
Usual problems
1) (in PPC) Start> Settings> beam receive> checked
Enables obex file transfer for IR and Bluetooth (can´t receive if unchecked)
2) Some bluetooth devices are not compatible with others. No motorola likes any Sony-ericsson. Ecost BT dongle using bluesoleil won´t work with my HTC 8125, etc. Try another device.
I have treo 750v, WM6.
I have done the procedure below:
1. Pairing my device with the laptop via Bluetooth.
2. On my Treo, clicked start > internet connection sharing > chosing bluetooth pan > click connect.
3. Device told me to activate Bluetooth on my PC. then I activated my Bluetooth PAN on my laptop. (I'm having BlueSoleil bluetooth manager installed on my laptop).
4. Treo said "Connected". My BlueSoleil manager said connected with an animation showing a link between my device and laptop icons. It even showed some message of its assigned IP address, etc.
But, i can not connect to internet on my laptop. I did ping to google, it said "Request time out".
Very weird, because when I choose USB Cable to do internet connection sharing, the connection is working seamlessly, i can connect to internet, good ping to google or any other sites, but not with BT PAN.
Please advice what to check, what to do, etc.. thanks
no replies yet, i hope someone will read and provide some suggestion for my problem. thanks
How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,
hapmas77 said:
How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,
Click to expand...
Click to collapse
I tried it just now as you suggested. it then says network connected. but then i cant connect to the internet from my laptop. so i back to using the USB cable, and it works flawlessly.
i wonder where's the missing key???
Two things:
1. With the Windows bluetooth, once the devices are paired and a connection is established (Internet Sharing on the Treo), goto the little bluetooth icon in the systray and right-click on it. Click on the "Quick Connect" menu and select "Network Access". Once you have clicked on "Network Access" you should see your phone listed (my 750 shows as the name I entered for "Owner Information"). Select your phone and that should do it. These steps are similar to the ones I use for my Macbook as well.
2. Regarding BlueSoleil Manager: when I lasted used it I remember having to set up the serial ports manually so they could be used for communication between the desktop and the phone. I haven't used the BlueSoleil since I had a Treo 650, but I still have the software. I'll load it up and see if I can't help you with your problem.
Regards,
idyllic
So I got to work and loaded up BlueSoleil on a system running MS Server 2003 SP2. The bluetooth dongle I'm using is a TRENDnet TBW-101UB V2 with BlueSoleil version 1.4.9.2 build 041108, stack version 04.03.15.20041105.
I paired my stock AT&T Treo 750 to the machine. Started "Internet Sharing" on the Treo making sure to select bluetooth pan and the AT&T network Once this was done I right-clicked on my phone icon in the BlueSoleil Manager and select "Connect." The I choose the "Bluetooth Personal Area Networking Service" and open a web browser to test... so far its worked every time.
Some notes:
1. The internet sharing on the treo isn't instant, give 20 seconds or so to fully connect.
2. The BlueSoleil manager connects even slower... give it 30 seconds.
3. Try repairing the phone.
4. If using the BlueSoleil software, disable the windows bluetooth as the MAY be a conflict there. Basically use one or the other.
I'm not sure if any of this is going to help, but I hope it puts you on the right track.
Regards,
idyllic
I have migrated from a Nokia E90 to the Touch Pro. I am a veteran Windows Mobile user, ever since the days of Windows CE, through Pocket PC 2003, 2003SE, 2005 and WM5.
I have a problem - I would like to use Bluetooth DUN to connect my laptop to the net. I used to do this with my Nokia E90 using *99#, so I know my phone provider will provide it. I can connect successfully using Internet Sharing over Bluetooth, but not using Bluetooth DUN. I get error code 678. I need to use Bluetooth DUN as I need to keep use the Bluetooth PAN on the laptop available to connect to my main computer.
Has anyone successfully connected via Bluetoot DUN yet? COuld you try it and let me know?
I've got the same problem. Fine on all previous phones. Now this one gives me this error.
Anyone solved it?
LLOYDY
Hi Guys!
Can you help with this problem? I've got this same issue. It's really annoying. I Can't also set up bluetooth connection between TP and my PC (Windows Vista).
Any idea?
See whether this can help.
http://www.windowsmobilecool.com/20...ows-smartphone-to-a-windows-pc-via-bluetooth/
My TP can do the BT DUN from my notebook now, but the problem is that it will disconnect after a short while. I am still trying to find out where is the timeout settings.
I did not look at the link but it looks like you guys have missed the apn information out of your extra initialisation commands for your modem
Ice_coffee: 'apn information out of your extra initialisation commands for your modem'
Can you provide those info ? And where to use it ?
I think this URL provide more detail, it works for me.
http://www.ppcsg.com/lofiversion/index.php/t94416.html
Go to the Device Manager, select properties of the Bluetooth Modem, click on the Advanced tab, paste the following string on the Extra initialization commands:
AT+CGDCONT=1,"IP","internet",""
Try to establish Dial Up again, use the following for the dialup dialogue box,
User name: Your Mobile No. [eg. 6591234567]
Password: 65IDEAS [I used this for Singtel]
Dial: *99#
This settings works for me.
excellent instructions here
http://www.filesaveas.com/gprsconnect.html#laptop
including pictures, showing just which settings need adding on your laptop, just copy and paste the gdcont info into the setup screen for your htc usb modem, as per the instructions, you will have to change the apn to the one for your provider.
Vodaphone = internet
O2= mobile.o2.co.uk
t-mobile = general.t-mobile.co.uk
My old HTC wizard doesn't have the option to select: 'connects to Work or Internet' in the WIFI config screen. Even connected to the router I don't have internet access
I'm also unable to receive files through Bluethooth. Some error about OBEX on the pc side.
When I connect the device to the XP pc, activesync 4.5 says it's connected but won;t sync. Trying to copy file by explorer gives gives an error message.
I haven't used this device for years, so I don't know if the problem existed. I do know that the activesync sync did work.
I'm using an old TNT professional rom.
I think somehow it's connected to each other. Does anyone have solution for this????
Hi All,
I flashed MSD Clean [Old GUI] Win Mobile 6.5 ROM which is available in the below link
http://forum.xda-developers.com/showthread.php?t=564002
But now i cannot receive files though bluetooth, i can send file.
I was using windows mobile 6.1 and bluetooth was working gr8...
I searched a lot but no luck; I did all the below steps:
1. Check beam is ON and Receive Incoming connection is checked
2. Installed Adv Config tool and enabled OBEX
3. Checked Obex Inbox, and changed the path to different folders.
4. Enabled Obex in registry HKLM\Software\Microsoft\Obex
5. Enabled ftp explorer in bluetooth settings.
6. Tried pairing the other phone but while connecting it says "Cannot connect, passcode failed"
But i am able to send files, also connect to active sync through bluetooth. I have heard that cooked ROMs have such issues, is there a patch or config to get it working.
Please help!
gopakumar.r said:
Hi All,
I flashed MSD Clean [Old GUI] Win Mobile 6.5 ROM which is available in the below link
http://forum.xda-developers.com/showthread.php?t=564002
But now i cannot receive files though bluetooth, i can send file.
I was using windows mobile 6.1 and bluetooth was working gr8...
I searched a lot but no luck; I did all the below steps:
1. Check beam is ON and Receive Incoming connection is checked
2. Installed Adv Config tool and enabled OBEX
3. Checked Obex Inbox, and changed the path to different folders.
4. Enabled Obex in registry HKLM\Software\Microsoft\Obex
5. Enabled ftp explorer in bluetooth settings.
6. Tried pairing the other phone but while connecting it says "Cannot connect, passcode failed"
But i am able to send files, also connect to active sync through bluetooth. I have heard that cooked ROMs have such issues, is there a patch or config to get it working.
Please help!
Click to expand...
Click to collapse
just use Advanced_Configuration_Tool_v3.3! with it you can overcome the problem of bluetooth