Database Info

M$ Bluetooth Stack Incorporated doesn't support File Transfer

Hi
HTC 8125 uses MS BT Stack. I downloaded the WM6 OS from here:
http://forum.xda-developers.com/showthread.php?t=324632&highlight=wm6+radio+wizard+download+lite
Is there any way to enable File transfer? I have installed the Widcomm Bluetooth Stack, but it doesn't support the Dial up network, so it's stepping backwards (furthermore: it takes 8MB of precious ROM!)
Can someboy please help me out?

Who say that MS BT Stack does not support File Transfer...
To send a file through Bluetooh, use the same method as Infrared send and you will notice Bluetooth devices in the list.
To receive a file, enable beam receiving option (The Infrared one) and it will receive files through bluetooth automatically.

Download Total Commander 2.5 public beta 3.
It has Send over Bluetooth option.
Good luck.

No more is needed!
Oh my lord! You're insanely right.
For sending files Over Bluetooth, use Total Comander
For receiving files Over Bluetooth, enable the "Receive all incoming beams" option in Settings \Connections \Beam
Thank you

starkwong said:
Who say that MS BT Stack does not support File Transfer...
To send a file through Bluetooh, use the same method as Infrared send and you will notice Bluetooth devices in the list.
To receive a file, enable beam receiving option (The Infrared one) and it will receive files through bluetooth automatically.
Click to expand...
Click to collapse
Hi,
i have a problem with my MDA I can send via BT but cant receive, the other device see my in the list but sending failed hapens
also via IR cant send/receive....???
kris

Usual problems
1) (in PPC) Start> Settings> beam receive> checked
Enables obex file transfer for IR and Bluetooth (can´t receive if unchecked)
2) Some bluetooth devices are not compatible with others. No motorola likes any Sony-ericsson. Ecost BT dongle using bluesoleil won´t work with my HTC 8125, etc. Try another device.

Couldn't get to Internet using Bluetooth PAN

I have treo 750v, WM6.
I have done the procedure below:
1. Pairing my device with the laptop via Bluetooth.
2. On my Treo, clicked start > internet connection sharing > chosing bluetooth pan > click connect.
3. Device told me to activate Bluetooth on my PC. then I activated my Bluetooth PAN on my laptop. (I'm having BlueSoleil bluetooth manager installed on my laptop).
4. Treo said "Connected". My BlueSoleil manager said connected with an animation showing a link between my device and laptop icons. It even showed some message of its assigned IP address, etc.
But, i can not connect to internet on my laptop. I did ping to google, it said "Request time out".
Very weird, because when I choose USB Cable to do internet connection sharing, the connection is working seamlessly, i can connect to internet, good ping to google or any other sites, but not with BT PAN.
Please advice what to check, what to do, etc.. thanks

no replies yet, i hope someone will read and provide some suggestion for my problem. thanks

How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,

hapmas77 said:
How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,
Click to expand...
Click to collapse
I tried it just now as you suggested. it then says network connected. but then i cant connect to the internet from my laptop. so i back to using the USB cable, and it works flawlessly.
i wonder where's the missing key???

Two things:
1. With the Windows bluetooth, once the devices are paired and a connection is established (Internet Sharing on the Treo), goto the little bluetooth icon in the systray and right-click on it. Click on the "Quick Connect" menu and select "Network Access". Once you have clicked on "Network Access" you should see your phone listed (my 750 shows as the name I entered for "Owner Information"). Select your phone and that should do it. These steps are similar to the ones I use for my Macbook as well.
2. Regarding BlueSoleil Manager: when I lasted used it I remember having to set up the serial ports manually so they could be used for communication between the desktop and the phone. I haven't used the BlueSoleil since I had a Treo 650, but I still have the software. I'll load it up and see if I can't help you with your problem.
Regards,
idyllic

So I got to work and loaded up BlueSoleil on a system running MS Server 2003 SP2. The bluetooth dongle I'm using is a TRENDnet TBW-101UB V2 with BlueSoleil version 1.4.9.2 build 041108, stack version 04.03.15.20041105.
I paired my stock AT&T Treo 750 to the machine. Started "Internet Sharing" on the Treo making sure to select bluetooth pan and the AT&T network Once this was done I right-clicked on my phone icon in the BlueSoleil Manager and select "Connect." The I choose the "Bluetooth Personal Area Networking Service" and open a web browser to test... so far its worked every time.
Some notes:
1. The internet sharing on the treo isn't instant, give 20 seconds or so to fully connect.
2. The BlueSoleil manager connects even slower... give it 30 seconds.
3. Try repairing the phone.
4. If using the BlueSoleil software, disable the windows bluetooth as the MAY be a conflict there. Basically use one or the other.
I'm not sure if any of this is going to help, but I hope it puts you on the right track.
Regards,
idyllic

Bluetooth dun error 678

I have migrated from a Nokia E90 to the Touch Pro. I am a veteran Windows Mobile user, ever since the days of Windows CE, through Pocket PC 2003, 2003SE, 2005 and WM5.
I have a problem - I would like to use Bluetooth DUN to connect my laptop to the net. I used to do this with my Nokia E90 using *99#, so I know my phone provider will provide it. I can connect successfully using Internet Sharing over Bluetooth, but not using Bluetooth DUN. I get error code 678. I need to use Bluetooth DUN as I need to keep use the Bluetooth PAN on the laptop available to connect to my main computer.
Has anyone successfully connected via Bluetoot DUN yet? COuld you try it and let me know?

I've got the same problem. Fine on all previous phones. Now this one gives me this error.
Anyone solved it?
LLOYDY

Hi Guys!
Can you help with this problem? I've got this same issue. It's really annoying. I Can't also set up bluetooth connection between TP and my PC (Windows Vista).
Any idea?

See whether this can help.
http://www.windowsmobilecool.com/20...ows-smartphone-to-a-windows-pc-via-bluetooth/
My TP can do the BT DUN from my notebook now, but the problem is that it will disconnect after a short while. I am still trying to find out where is the timeout settings.

I did not look at the link but it looks like you guys have missed the apn information out of your extra initialisation commands for your modem

Ice_coffee: 'apn information out of your extra initialisation commands for your modem'
Can you provide those info ? And where to use it ?

I think this URL provide more detail, it works for me.
http://www.ppcsg.com/lofiversion/index.php/t94416.html
Go to the Device Manager, select properties of the Bluetooth Modem, click on the Advanced tab, paste the following string on the Extra initialization commands:
AT+CGDCONT=1,"IP","internet",""
Try to establish Dial Up again, use the following for the dialup dialogue box,
User name: Your Mobile No. [eg. 6591234567]
Password: 65IDEAS [I used this for Singtel]
Dial: *99#
This settings works for me.

excellent instructions here
http://www.filesaveas.com/gprsconnect.html#laptop
including pictures, showing just which settings need adding on your laptop, just copy and paste the gdcont info into the setup screen for your htc usb modem, as per the instructions, you will have to change the apn to the one for your provider.
Vodaphone = internet
O2= mobile.o2.co.uk
t-mobile = general.t-mobile.co.uk

Check email through USB internet connection, how? (HTC Touch Pro / Raphael)

2 Questions:
[Question 1] - SOLVED & Thanks to all~
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *Not Outlook @ my PPC.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
[Question 2] (NEW & not solve yet > added & edited @ 17/10/2008)
Another question (but still regarding check email through USB).
My Touch-Pro is sync with my office PC's Outlook with my POP3 email. I'm at home now connected USB to my home PC (with Internet), can I use my mobile to check that outlook email through this USB connection?
Please, please, please help...

littlemao said:
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *I don't wanna use Outlook.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
Please, please, please help...
Click to expand...
Click to collapse
I don 't know how to select your internet connection actually. But you can allways block your HSDPA/3G/EDGE internet connection with NoDATA software (freeware, just two screen taps) enforcing your mobile use USB.
If anyone knows another solution I 'll be happy to hear.

I have an 838pro, but I usually just close any data connections first, then when the box pops up saying its going to connect via 3g, I cancel it and then it defaults to the usb/wifi connection. It seems WML defaults to using your 3g connection every time so unfortunately you have to do this every time.
Cheers

Thanks for the fast reply, will try both and update this thread again.
Btw, any chance we can modify the registry or etc to change the default connection?

Hey, it works! I've install NoData and use it to disable my Touch Pro 3G/GPRS connection, and check my Hotmail, and it works perfectly!
Thanks, freco & wireless

Glad you got it sorted - just a quick thought...
In the Activesync connection settings there is an option File > Connection Settings > "Allow wireless connection on device when connected to desktop" - if you disabled/unchecked this would it not do the same thing?

I think "wireless connection" means WiFi.
If you 're wright when cradled or usb connected you cannot make or recieve calls with these setting, which is not happening.

freco said:
I think "wireless connection" means WiFi.
If you 're wright when cradled or usb connected you cannot make or recieve calls with these setting, which is not happening.
Click to expand...
Click to collapse
I thougt it only applied to data - I've certainly made calls with my device docked. I`ll have a play with my htc later...

Just some update to this thread, I just have my Touch Pro 'hard-reset' due to touch panel was not functioning, and now after total hard-reset ...
I can use the USB connection without having 'NoData' installed...
wondering why...

in activesync connection settings, untick 'Allow wirelss connection on device when connected to desktop'
this should work

For each email account you have to manually choose which type of connection to use.
In email got to:
Menu->Tools->Options, select email, ->Edit account setup->Advanced Server Settings.
Now you can choose if you want the email to use GPRS or Wifi but you have to do this whole thing everytime you change! Not good.
For USB connection I don't know - could you perhaps tell us what it is using?
Thanks.

Another question (but still regarding check email through USB).
My Touch-Pro is sync with my office PC's Outlook with my POP3 email. I'm at home now connected USB to my home PC (with Internet), can I use my mobile to check that outlook email through this USB connection?

littlemao said:
2 Questions:
[Question 1] - SOLVED & Thanks to all~
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *Not Outlook @ my PPC.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
Click to expand...
Click to collapse
Hi have you solved hotmail problem with USB ?

hey i have an HTC touch but for some reason i cant change the password on the wireless network on the connection manager... i have an Alltel phone. but there are settings on it that change the password that i put in it to another one.. do you know how to fix that?

littlemao said:
Hey, it works! I've install NoData and use it to disable my Touch Pro 3G/GPRS connection, and check my Hotmail, and it works perfectly!
Thanks, freco & wireless
Click to expand...
Click to collapse
Huh, I installed it on my Fuze, turned off both data connections shown, launched Opera and it went right online via 3G! I then tried a soft reset and found the same behavior. The program seems to do nothing.

To solve this issue without downloading or using any extra piece of software:
1. Through Settings > All Settings > Connections > Connections
2. select Advanced > Select Networks > then choose My ISP as your internet communication method
3. choose New > enter any name you like then select a modem type "Hayes Compatible on COM1" or any option rather than Cellular GPRS, 3G.
4. the trick, just enter *99***2# in the required phone number as this is a Windows-based code to directly call a device for internet connection where you can replace the number 2 with any other number for multiple sharing internet connection with different devices at the same time.
Now everything will work just fine
Important notes:
-------------------
Make sure that:
1. in the "Network Connections" in Microsoft Windows XP or Vista you have a new icon of "Internet Connection" under Internet Gateway that appeared once you have connected your HTC in ActiveSync or WMDC 6.1 modes.
Hint:
you can use Internet Sharing application installed in HTC in order to create a new ISP connection profile instead of going through Connections option.
Hope this contribution could be usfeul,
Thanks

How to solve bluetooth problem in WM6.5

Hi All,
I flashed MSD Clean [Old GUI] Win Mobile 6.5 ROM which is available in the below link
http://forum.xda-developers.com/showthread.php?t=564002
But now i cannot receive files though bluetooth, i can send file.
I was using windows mobile 6.1 and bluetooth was working gr8...
I searched a lot but no luck; I did all the below steps:
1. Check beam is ON and Receive Incoming connection is checked
2. Installed Adv Config tool and enabled OBEX
3. Checked Obex Inbox, and changed the path to different folders.
4. Enabled Obex in registry HKLM\Software\Microsoft\Obex
5. Enabled ftp explorer in bluetooth settings.
6. Tried pairing the other phone but while connecting it says "Cannot connect, passcode failed"
But i am able to send files, also connect to active sync through bluetooth. I have heard that cooked ROMs have such issues, is there a patch or config to get it working.
Please hel