So.. I found a update for my Qtek 2020i and while it was updating it disconnected from the PC. It turned on and I checked the version to see the update didn't work so I wanted to try again. I restarted it and it didn't want to turn on anymore. I tried the soft reset and hard reset it didn't work. It's just being numb without any signs of working. Any idea what might had happened? Also any idea where I can find a cd for it? Like the main cd which comes with it cuz I assume it has the update manager which works when something like this happens.
Related
I've recently upgraded my MDAc with the T-Mobile 1.13 ROM upgrade from their website.
Everything else seems to be fine except for ActiveSync, it's very tempremental- I managed to sync up data on the first connection but later that same day, I connected the device again and it doesn't seem to do anything except charge. I don't even see the AS tray icon either.
Anyone else had similar problems (and solutions for it)?
Thanks.
Had same type of problem myself, fix was to shut down Activesync on computer completly and deinstall, the reinstall active sync(3.8.0) connect device and give a new device name.
Ok thanks- I will give that a go.... I've got AS installed on 4 PCs :shock:
Still doesn't work- I remember actually trying re-installing AS on another machine with the same result.
Think I may have to go back to the 1.12 ROM.
Try hardresetting device sometimes it takes more than one go to get it stable!!!!!!!!!
I've tried about 5 hard resets now...
But it seems to work for the first couple of times then no more.
Another thing, I tried installing Card Export again and the icon for that also does not show up on the tray.
Anyone know if it is possible to downgrade to 1.12 with a shipped ROM?
If u get an AS connection that is stable then yes
Just to 'close' the topic; I went back to 1.12 ROM and all seems fine again.
I upgraded our first SPVM1000 (xda2 from orange) with WM5 and it all seemed to work fine.
I then up upgraded the second and it went fine. The second one is still workign completely fine with no problems. We noticed that the first one could not get reception. If you put its sim card in the other phone then it works. Now I tried with with Orange and Vodafone sims. They work in PDA 2 but in PDA 1 there is no reception (it was working yesterday).
Then it kept coming up with an error saying that it was sorry for the inconvenience but there was an error with cprog.exe.
After a reset (power button and soft reset button) that stopped happening but then I found that I could not active sync PDA1. It cant connect and so connects as "guest". After what used to be a hard reset, everything is still as though I just did a soft reset with WM5 - not sure why.
Then I tries to backdate it to the old rom. If I use OSImage tool it wants it to be active synced which doesn't work (v3.8 or v4.0). I also tried to reupgrade with WM5 again (a fresh installation) but althoght it will go into boot mode with Serial 1.03 and then USB 1.03 appearing on the screen, the upgrade fails. It says there is a communication error.
Everything is working with PDA 2 so it cant be a connection fault. I think I did something and now I got myself in quite a pickle.
Can anyone help please?
I'd be happy to reset / reboot right back to the beginning again though I'd like to keep WM5.
Thanks
Anthony
Solution (how to hard reset in wimdows mobile 5)
Hard resetting WM5 has fixed all of these problems including the phone reception. To hard reset (sometimes called clear reset in the forums) you have to press the tape and camera buttons and then the soft reset with the stylus. This is on an XDA2 (SPVM1000) and is different since upgrading to WM5 (prev power button and the soft reset did the trick). I found lots of websites giving different instructions on how to do this but for the XDA2 type this works.
Ant
)
Hi
I am having turabul whit my mda vario 2
3 months a go I got the phone from t mobile is been came whit the windows mobile5 and I install the windows mobile 6 but I am having turabul whit it and I when to go back to windows mobile5 now I call the T-Mobile customer service they cudont help me and refer me to manufacture to solve the problem.
I tray to install the window mobile5 but is giving me turabull code 224 devise is not responding I tray to dart resetting is well but instil is running on window mobile 6.
Can you pls help me to install the window mobile5, or have to delete the rom update.
Hey Bro, you're knocking on the wrong door, this is the "Himalaya" forum you need to check out the "Wizard" Forums next door
Reply Deleted
Hi,
I tried to search the forum, I googled around, but I seem to be the only one with this problem:
sometimes (I can't specify it anymore, there is not routine in this problem!) when I open my camera the screen stays black, as if the camara was covered with something (which it isn't, of course!)
I already hard resetted my Crouise, problem was fixed for like 2 weeks, but today, problem turned up again.
Soft reset does not help... any ideas except throwing it at some hard wall?
Edit: Phone is really slow when this problem come up and the only way to leave camera mode is to press the red phone button or do a soft reset
Sounds quite bad, may be a hardware fault...
One hard reset temporarily solved the problem, if you did the hard reset again would it again solve the problem (for a while?). Backup all your files and give it a try.
If not then it may be a hardware problem, in that case I would recommend you send it back to HTC or O2.
If it temporarily solves the problem then it is probably a software issue - I would recommend you try flashing a new ROM, or flash the original ROM.
Just a suggestion...
I did a hard reset again today, backing up my Files via Spite Backup, but after reseting, Camera still isn't working...
Recovering the backuped files didn't help either...
F**k, I really don't want to sent the phone in, because I only have this one, and I sure it's gonna take some weeks to get a replacement...
Is there any way of reinstalling the camera...*hoping for hope*
I have exactly the same problem and i haven't find annything to fix this.
Need some help please
I've got the same problem, I have only find (for my case) some situations...
If you turn on the pda, it works.
if you wait for a while, it works again.
if you wait for some hours, it stop working...
then, if you regular turn off and on the pda, is not secure that it works.
If you soft-reset, it works.
If you keep the pda connected via usb or ac cable, it works everytime (I'm testing it now and it's from this morning that the cam works perfectly).
So I think is a only software problem, exactly I think is apmd error.
Power saving shut down cam device, and when you click camera.exe, the os is not so quickly to return on the device...
I ask to the experts (not me, obviously) if it can be a possibility...
Also can I set, only for cam device, the power saving disabled? So I can test my consideration better?
Thanks
hi! i have an imate spl which was working ok. suddenly the camera stopped working, the camera application just freezes and doesnt switch on at all. the windows mobile busy cursor just keeps running. also, the task doesnt show in any of the running applications.any help available??
Hard Reset or update software if it fails stil could be hardware failure
Im screwed!
tried ahard reset. attempted a rom upgrade. went fine....but had a power cut in between so my phone now shows a white screen which says update again, connect usb and wait. any way to get around that? i have my limited warranty intact. will this cover it? it was an official rom i tried to upgrade to, by the way. can u help?
Hai people,
Im new here and i got a problem with my HTC Hero. Ive got it rooted to FroydVillain through this site and it worked fine for quite a while. But since thursday my phone flipped.
My trackball keeps lighted on, whatever i do. My battery runs low in like 6 hours...normally i did a whole day with it.
When i plug the usb cable it doesnt connect to my computer, it only starts powering up the battery. If its connected with my usb cable and i remove the battery the trackball starts flickering instead off burning all the time.
I didnt know what was going on, so i tried to do a nand restore in the root menu. After that i still had problems with the trackball and it still doesnt connect to my pc. Then i tried a factory reset in the root menu, but the problems are still there.
It doesnt let me get into the mobile network settings either. It doesnt find my provider and cant change it, so at the moment my whole phone is useless
Im quite new with this whole rooting thing, so i might have messed it up now? I hope some people know a solution for this. Please dont throw to geeky stuff to me, because i might not understand it
My software settings are this according to the phone:
Firmwareversion: 2.1 update1
Smallbandversion: 63.18.55.06PU_6.35.15.11
Kernel-version: 2.6.29-063c4d24 htc-kernel(at)and18-2 #1
Build number: 3.32.405.2 CL 191507 release-keys
Softwarenumber: 3.32.405.2
Browserversion: webkit 3.1
Any help is welcome! Thanks in advance
I have tried to fix it myself cause i didnt get any responds yet, but without succes. I got it to restart again in the original htc version, and get the setup menu where u can set your country, wifi connection etc...
It doesnt recognize my sim card though, and doesnt find a provider because of that. When its finished with the setup menu its at the 'normal' home screen. But as soon as it turns black as the screen saver i cant get the screen on again.
The trackball also still keeps burning.
I went to my local phone repair point, but they dont do androids :S its for nerds he said -_-
Im getting hopeless...plx could some1 tell me what to do. I want a whole reset off the phone...i dont care losing information on it. But because i cant connect it with my computer i have no idea how to flash a rom on it