Related
This was already mentioned by alansj here, but I though it was important enough to have it's own thread
Saurik has created a Debian image you can install onto your sd card. Once installed, you have the full power of debian on your phone. No more puny little busybox
Instructions and such are here.
Thanks Saurik!
I was actually looking into this earlier... let me know how it runs
cant download a few things
can not open ext2.ko......when i type insmod $kit/ext2.ko ...i get "insmod: can't open ' /sdcard/kit/ext2.ko'...some one please help me out
What graphical interface does this install, or is there one?
cbrunner said:
What graphical interface does this install, or is there one?
Click to expand...
Click to collapse
That was my question when I heard about this... I just went for it though because when I read through the instructions, I realized that everything is stored in the MicroSD card and in RAM (which is reset when the phone is rebooted)
It turns out that there is no GUI - just a good old text-based Debian install! I'm sure that someone will get one working... or maybe just port the entire BSD Subsystem along with apt so we can just forget the Market...
amgupt01 said:
That was my question when I heard about this... I just went for it though because when I read through the instructions, I realized that everything is stored in the MicroSD card and in RAM (which is reset when the phone is rebooted)
It turns out that there is no GUI - just a good old text-based Debian install! I'm sure that someone will get one working... or maybe just port the entire BSD Subsystem along with apt so we can just forget the Market...
Click to expand...
Click to collapse
This awesome article has answered tons of my questions and also seems to imply otherwise:
"This does not replace Android. This also gives you access to the full plethora of programs available in Debian and let's you continue using your phone as it was intended to be: as an Android device with all the capabilities thereof."
In addition, this IRC channel is where the author of that article idles.
cbrunner said:
This awesome article has answered tons of my questions and also seems to imply otherwise:
"This does not replace Android. This also gives you access to the full plethora of programs available in Debian and let's you continue using your phone as it was intended to be: as an Android device with all the capabilities thereof."
In addition, this IRC channel is where the author of that article idles.
Click to expand...
Click to collapse
Right. No gui, but you have a full working linux distro on your phone. You can apt-get just about any of the normal stuff.. You could probably even get a x-windows installation to working, although you would have to connect to it remotely - it would probably be "difficult" to get it to display a gui on the phone itself (although that would be sweet).
I've installed Saurik's image on my phone, it works great. Although if you do the "unionfs.sh" step, the wifi settings don't quite work right anymore. It won't let you enable or disable wifi.
But I was able to get an ssh server (with real user and password management) and even a samba server running on my phone quite easily with this . I've also got gcc installed, and will start playing around with developing directly on the phone (instead of having to cross compile).
Sorry for not being hip to the game, but what the heck is Debian?
donutman said:
Sorry for not being hip to the game, but what the heck is Debian?
Click to expand...
Click to collapse
Arguably the most influential distribution of Linux ever. Its package management system, apt, is awesome, and it is what Ubuntu and tons of other distros were started from.
Why would you not use Google before asking here?
can anyone help with my above mentioned problem
i want this baby to run
Is your phone connected to your computer? You lose access to the storage card when it is, I think (you can't cd to it when it's plugged in) and unplugging my phone allowed me to install the module.
/a
Installing Debian errors?
Here is what I get:
insmod $kit/ext2.ko
insmod: init_module '/sdcard/kit/ext2.ko' failed (Operation not permitted)
i've been through this, i'm not gonna explain what happens and why, but imo, the only way to get a real root is the following:
-Install telnet client to your device (from android market).
-Reboot your phone to be sure no telnet-daemons/shells are running.
-When you are on the desktop, just type "enter", "telnetd", "enter". (If you do it from the terminal app it will run under the uid of the terminal app which is not root).
-Then run the telnet client app, and connect to local host. (Or skip this step + the first one if you wanna connect from another pc)
I know it's weird, but when you run something from the terminal app it runs under the terminal app's uid, even if you run a new shell, you still are eg. "app_33", not root. and btw you will have to set the environment variables all from the same shell, that means you can't have a script cause it will run under another shell, with another uid. I'm so confused... maybe I'm wrong but android is not the most friendly environment.
aggtrfrad said:
i've been through this, i'm not gonna explain what happens and why, but imo, the only way to get a real root is the following:
-Install telnet client to your device (from android market).
-Reboot your phone to be sure no telnet-daemons/shells are running.
-When you are on the desktop, just type "enter", "telnetd", "enter". (If you do it from the terminal app it will run under the uid of the terminal app which is not root).
-Then run the telnet client app, and connect to local host. (Or skip this step + the first one if you wanna connect from another pc)
I know it's weird, but when you run something from the terminal app it runs under the terminal app's uid, even if you run a new shell, you still are eg. "app_33", not root. and btw you will have to set the environment variables all from the same shell, that means you can't have a script cause it will run under another shell, with another uid. I'm so confused... maybe I'm wrong but android is not the most friendly environment.
Click to expand...
Click to collapse
Haha I feel you. Now the thing is when I am at the home screen on my G1 i push "Enter" on the keyboard and then type "telnetd" and then push enter again it doesnt do anything. When I open up telnet client on my PC it wont connect with wifi on.
So I then go to Telnet client on myG1 and go to connect to "localhost:23" and it says "Error while connecting to server: localhost/127.0.0.1:23 - Connection refused" the thing is that my local host for my wifi is not 127.0.0.1:23
And when I "netstat" from inside Terminal Emulator there is no address with port "23"
ballaholyk84 said:
Haha I feel you. Now the thing is when I am at the home screen on my G1 i push "Enter" on the keyboard and then type "telnetd" and then push enter again it doesnt do anything. When I open up telnet client on my PC it wont connect with wifi on.
So I then go to Telnet client on myG1 and go to connect to "localhost:23" and it says "Error while connecting to server: localhost/127.0.0.1:23 - Connection refused" the thing is that my local host for my wifi is not 127.0.0.1:23
And when I "netstat" from inside Terminal Emulator there is no address with port "23"
Click to expand...
Click to collapse
Are you already running RC30?
SplasPood said:
Are you already running RC30?
Click to expand...
Click to collapse
Yes, I am running the Modified RC30 posted by JesusFreke
cbrunner said:
Why would you not use Google before asking here?
Click to expand...
Click to collapse
Because I wanted you to tell me baby. That is what a wife is suppose to do.
JesusFreke said:
Right. No gui, but you have a full working linux distro on your phone. You can apt-get just about any of the normal stuff.. You could probably even get a x-windows installation to working, although you would have to connect to it remotely - it would probably be "difficult" to get it to display a gui on the phone itself (although that would be sweet).
I've installed Saurik's image on my phone, it works great. Although if you do the "unionfs.sh" step, the wifi settings don't quite work right anymore. It won't let you enable or disable wifi.
But I was able to get an ssh server (with real user and password management) and even a samba server running on my phone quite easily with this . I've also got gcc installed, and will start playing around with developing directly on the phone (instead of having to cross compile).
Click to expand...
Click to collapse
What command did you use to get the SSH to install? Every time I do the one in the tut by saurik it errors and wont install all the way. I get an error after x11-common and it wont finish.
ballaholyk84 said:
So I then go to Telnet client on myG1 and go to connect to "localhost:23" and it says "Error while connecting to server: localhost/127.0.0.1:23 - Connection refused" the thing is that my local host for my wifi is not 127.0.0.1:23
Click to expand...
Click to collapse
localhost usually refers to the loopback interface which on most devices will be 127.0.0.1.
I'm getting the same thing here... I think there's something wrong with apt-get having to write to /tmp which does not exist (and is mounted read-only).
This is easier than making a cup of coffee.
Pictures below as attachment couldnt figure how to put the pic here edit figured it out now im just lazy.
you dont have to do it the hard way
Everyone (edit: i thought so at the time)will want this "Fully" (note below) funtioning Ubuntu system
or you can make your own here: http://forum.xda-developers.com/showthread.php?t=913622
I will be maintaning and updating as time permits
Phone has to be rooted: http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/Guides_&_Tutorials
NEW IMAGE 3.5 gigibyte
Lucid base image (only added: lxde and tightvncserver): Zip http://www.megaupload.com/?d=GLMYVCMN User: "dad" Passwd:ffffffff
Remove app2sd and settings- applications- manage applications- sdcard "move all apps to phone" or it will not work!
I suggest you install gnome-panel
I use it and i find no speed differance!
trying to get :upstart services" to work im looking into compiling a kernel with "CONFIG_TMPFS enabled, to initiate a workaround, because "upstart" services wont work in a chroot.
Stock Maverick : http://www.megaupload.com/?d=56AT71WD
Karmic Sucks programs stop opening after some short time, so i gave up.
Tested with: CM7 http://mirror.teamdouche.net/get/supersonic/update-cm-7.0.0-RC1-Supersonic-signed.zip
CM6: http://mirror.teamdouche.net/get/supersonic/update-cm-6.1.2-Supersonic-signed.zip
myn-WarmTwoPointTwo-11-05-2010-RLS-3
Unzip
Copy the "ubuntu" folder to your sd card
Go to market download "Terminal" and android VNC Viewer
Open terminal and type: (without the quotes), "su" then "cd /sdcard/ubuntu"
then "sh ./ubuntu.sh"
then "bootubuntu"
then "vncserver :0 -geometry 1024x800"
Thats it, go to android VNC Viewer and use dad for nickname, "ffffffff" for the password, "localhost", for address, 5900 for the port, Use 24bit veiwing settings, then go.
to shutdown you will have to power off phone and power back on.
Enter in your :"Initial Command",in the settings of Android Terminal:
su
cd /sdcard/ubuntu
sh ./ubuntu.sh
bootubuntu
So everytime you want to start ubuntu just open terminal
to start VNC SERVER automaticly you will have to add to the bottom of your /home/.bashrc file this:
cd /
rm -r -f /tmp
mkdir /tmp
vncserver :0 -geometry 1024x800
Thats it, your off ENJOY
Notes: Its as fully funtioning for myself, cant speak for everyone
This is in Beta stages I am an old Visual Basic dabbler as a hobby, and am not very fluent in the lenux operating system. However this "ubuntu on mobile device" has rekindled a lost desire to program.
I will update changes as i get the time
If anyone would like to contribute their lenux expertese to iron out the bugs, i and so many others would appreciate it
Issues to work on:
:no sound
NOTE: A big kernel level problem is the lack of sound. Most of the kernels we use as a base for our ports are designed for Google Android. Android doesn't use the standard Linux sound System ALSA. An ALSA wrapper for the EVO DSP kernel system must be written.
:Setting up users and groups (used kusers but seemed to slow system a bit, needs kde-common) But is very tolorable, I actually use dolphin. (cant get nautilus to create folders or files (destination read only? u got me)).
:hacked /root/.bashrc for easy login help (when using terminal runs .bashrc. dont know anotherway to start hamachi on login and also vncserver tries to restart)
:keyboard mapping (mapping arrow keys to the abc keyboard it has arrow keys, esc,etc...)
: No way to exit or turn off ubuntu. You have to turn off phone, to turn off ubuntu.
nce in a while the programs refuse to open, it has somthing to do with ?. you have to restart ubuntu again.
I suppose a fluent ubuntu/lenux person could help change usernames and such, using the terminal,set proper permissions and such
Im using CyanogenMod Rom its the only one that works with Hamachi
your rom will most likely work, however networking wont!
Tips:
ownload VNC for your computer and modify your ubuntu desktop on your computer screen (that way i dont need my glasses) (use "ifconfig" to find ip address)
:You can even use VNC to view the build while in qemu emulation, after installing lxde and tightvncserver in the emulation. (watch out for seg faults)
:In terminal, preferances-initial command, enter the "cd /sdcard/ubuntu ...etc ," that way its a one click to login .
:Get "abc keyboard" from market it has the esc, arrow keys etc... ( extra keys only good outside chroot, the "terminal", on your android desktop)
:If your not familiar with ubuntu, you use synaptic package manager to install programs
:When u share over himachi or start smbd, programs will stop opening.
.
Trust me everything i want it use it for seems to be pretty zippy, but just give a little xtra time for programs to load the first time. (Firefox may take 90 sec. to load the first time. After that its a snap)
I Would like to check into this
The no sound issue is getting to me, I may wait for that as that is an essential to my all in one device.
THANKS FOR THE HARD WORK. I LOVE UBUNTU
you really have to try it and tell everyone about it cant believe its not one of the hottest topics
I Would like to check into this
any way to delete this post....didn't mean to submit, came back to send like i didn't send it but ending up sending twice
apologies
Sounds pretty cool, I will defiantly have to give this a try. Question though, is this installing over top of the rom I am currently using. Example I am using the MIUI 1.22, if I install this is this like dual booting or will it just uninstall every time I reboot the phone??
Is it still uploading? I really want to try this!
corybucher said:
Sounds pretty cool, I will defiantly have to give this a try. Question though, is this installing over top of the rom I am currently using. Example I am using the MIUI 1.22, if I install this is this like dual booting or will it just uninstall every time I reboot the phone??
Click to expand...
Click to collapse
This will sit on your sdcard and ride side by side with your android system (you can use your phone at the same time)
IT DOES NOT EFFECT YOUR PHONE IN ANY WAY
wasnt shouting just wanted everyone to see
ioos said:
Is it still uploading? I really want to try this!
Click to expand...
Click to collapse
Download away!
This is awesome! I can't wait to get home and give it a try.
This is gonna be a great weekend. Between this and the flashable ROMs that are starting to roll out for my nook color, I might be sprouting antennae by Monday.
So wep cracking soon...? That's about the only thing I want/need Linux for.
Sent from the void...
wuclan48 said:
So wep cracking soon...? That's about the only thing I want/need Linux for.
Sent from the void...
Click to expand...
Click to collapse
How would one go about this "wep cracking thing"
please explain further
Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)
**most wpa specifications are not crackable yet and those that are often have a very stringent set of requirements (off the top of my head: most require someone to be legitimately connected to the access point and very simple passwords with low encryption.
On topic, though, this is sweet. Hope I can get something like this on my galaxy tab too!
EDIT: If you really need to know this (please only for testing... not to mooch people's internet) Google "wep cracking on backtrack"
The short simple answer is you sniff packets that the wireless access points send out and manipulate them to decrypt the key.
EDIT 2: I just realized you are also the guy who made this. Let me answer a few questions.
1) For audio you probably need to find a way to register the hardware with a Linux Audio Mixer. I'm guessing Ubuntu uses ALSA? I'd have to look that up
2) For users, kusers is part of the KDE desktop system. Ubuntu uses GNOME. People generally only use one or the other (unless they're trying to show off). That's probably why it either a) won't work or b) not work well and take up lots of extra space
3) It's Linux, not Lenux (but that's fine I can sense English isn't your first language... it's not mine either, but that's fine ^^)
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Sorry i just used the wizard and made a zip file with winzip 12.1
Quote"Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)"
Thanks for the info
laydros said:
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Click to expand...
Click to collapse
shame on me .
Your right im a noob and really know too much about it yet i just like having ubuntu on my phone.
Ill do better next time
People talking about cracking WEP and stuff, this probably doesn't have a driver to put the wireless card to put the card in monitor mode.
laydros said:
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Click to expand...
Click to collapse
Have the same problems, did you happen to find anything to open it with? I searched a little on google myself but all I find is software that needs to be purchased.
Homefix said:
Quote"Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)"
Thanks for the info
Click to expand...
Click to collapse
AFAIK, WEP can be easily cracked. WPA or WPA2 though, will require bruteforcing, there is no way around it.
corybucher said:
Have the same problems, did you happen to find anything to open it with? I searched a little on google myself but all I find is software that needs to be purchased.
Click to expand...
Click to collapse
I will repackage it, but it might take 3-4 hrs to upload, sorry.
ill get right on it
https://market.android.com/details?id=com.galoula.LinuxInstall
New every thing. Redesign of everything every where, rewite of all English parts, many bug fixes.
What for ? install Debian using debootstrap in chroot, and use your Android device like if you had installed Linux on a standard computer.
Bugs shall be reported to [email protected] .
Misc questions about how to use and feature request and general discussions to [email protected]
Market description:
This application will allow you to install a complete Debian distribution in your Android device. Based on chroot, it will perform a standard debootstrap and install a legacy Debian so that you can install, and run any classic Linux command, tool, daemon or service.
The package has few limitations; it is not restricted to Debian; we already offer the choice to use Ubuntu, and will add more distributions in close future. Each distribution is available in several tastes (stable, testing ...). It will not require to reboot; chroot is run inside Android. Installation can be done on any storage device, either on SD card, or inernal memory; no need to repartition any thing, run mkfs or fdisk. We do with what you let use. If you have almost nothing, the package will manage with almost nothing; if you can afford for a large ext4 partition on your SD card, the package will be happy to use it.
It will allow you to install all classic LAMP services like Apache, MySql, PHP, Samba, Netatalk, or just any classic Linux tool like vim, xterm, aterm, Abiword, Firefox, dillo, wget, cron, Perl, Python ... just everything.
Package utilisation will require a rooted device.
Reasons to install this package can not be listed. Just too many: want a cron daemon ? want to have gcc inside your phone ? want to recompile some kernel driver because the legacy Android driver for your Wi-Fi card has is bogus or limited ? want to use vim, or the real full featured desktop ls, ip, nmap, or top commands ? this package will give you all this for free, and much much more.
Requierments:
- an Android device based on some Linux kernel
- a rooted environment
- 300M free space
That's all.
Optionnal registration on our website, http://android.galoula.com/LinuxInstall/Register.php , will allow you to use advanced management features, and install package from within the application interface. You will not need to type any strange command in any terminal. And you will be able to make some services start automaticly at phone boot, and/or application start.
Online documentation: http://android.galoula.com/en/LinuxInstall/
Quick installation guide: http://android.galoula.com/en/LinuxInstall/QuickTutorial.html
Click to expand...
Click to collapse
Free space must be on sd-card or phone memory?
Both accepted You choose where to install.
500M by default on SD card using loop method (on ext2 or fat). Down to 180M using the directory method (does not work on FAT).
thanks for this man.
Sorry if this is a noob question but will this in any way brick/soft brick my device?
Sent from my GT540RR using XDA App
Yes, it can.
But this app is underdevelopment since almost two years, and nobody ever bricked yet. I have written a very long complete tutorial, where I say what you should NOT do. I could easily tell you how to brick in 5 steps.
But we have been working very hard on default settings, to make default settings as much safe as possible.
There are many bugs, many known bugs; but 99.999% bugs will just make the chroot not work. Data loss is very rare. Data loss was highly probable in previous version 3.2 . But default settings are now safer. And if you do not do what we claim to be dangerous ... you are safe.
The most frequent case with 3.2 was complete wipe of /sdcard and /data . This have been fixed.
We never ran into wipe of /system until now. Never bricked.
And since Galoula and me are working on it, we are the most exposed ones. We test every single feature, in all possible situations. And when we find a wipe case, we repro it dozen time until we understand why, and how to fix, so that it won't happen to YOU.
3.3 is way safer than 3.2. And nobody reported wipe on 3.2 ...
But if you blindely clik any where, yes it can. And if I tell you where to click, you can brick in 5 steps for sure And it won't be a soft brick. I promise a good real brick where even HTC will be in trouble to repair it It's explained in the tutorial.
Wow. Thanks for the reply. At least i have an idea now. Is the tut on the app itself? I'll nake sure to read it very carefully coz i wanna learn all about this stuff
Sent from my GT540RR using XDA App
A not so short tuto is inside; but since most mobile devices have only one screen, you may want to read the online tuto on your computer: http://android.galoula.com/en/LinuxInstall/
Default settings are safe. Just follow the guide.
Will go ahead and read this tut. I'll make sure to give feedback. Thanks for paying attention to this noob
Sent from my GT540RR using XDA App
this is just great, are there any videos or screen shots?
edit: nevermind i just checked the market
Feel free to send us screen shots; I am not good at doing that (i can to shots, but I don't know what could be nice to upload).
We would apreciate shots of working (of course ) VNC clients connected to server running localy, or local consoles (like Connectbot) doing funny things.
Send to support. Thanks.
Spent the whole weekend on this...
I'm trying o get an X- GUI on the Samsung Captivate, (hope i said that right) like Ubuntu so i can VNC to a linux desktop environment. I'm on FASTY and wondering why I keep running into refusal of connection. I have the password and localhost as well as the port correct. I've lost sleep on making this work. Can anyone help...?
You question is somehow off topic.
You seem to have a basic VNC connexion issue.
Could not help without deeper description. And I rarely use VNC, i have very low experience.
First point: do you have free space in the distro ? depending on installation method, and what you installed, you may have run out of disk space (especially Ubuntu, uses lot more than Legacy Debian).
The distribution manager is still beta AOT. It may report the VNC service to be up and running, when it could not rally run. First thing to check is: is it up ?
- from local machine, to ps, and check if process is up
- from remote machine, just scan your IP for the device. VNC should be port 5800 or 5900, forgot which one.
Your VNC password is *NOT* your distribution password. VNC password need to be set at a different place (this is VNC specific; VNC is not UNIX, and never claimed to be fully a *UNIX "merged" service*).
Never used VNC in LinuxInstaller. Never yet. Not enough time to test it. We take report, and will test only major and frequent issues. We have many "easy success" reports, so, we don't worry about it. We have much more issues about rooting (getting root on phone), and starting debootstrap; this is what we focus on.
Make sure you have enough free space (at least 50M free left), then join any Debian or Ubuntu forum. They will ask you if you have a CLI; you shall use either adb shell, or connectbot. Fact you are in a chroot is not an issue, chrooting is not frequent for debian users, chrooting is the normal procedure to install Gentoo; and all debootstrap users use chroot daily; forums should not reject you for this reason. As long as you have a CLI.
Good luck.
Lost me fast...
Sorry..but you lost me, and FAST! I really don't have the terminology down...but I do have the Linux 3.3 Installer running properly...it indicates so. I was assuming that this would allow me to somehow load Ubuntu on my Captivate..as I've seen on some screen shots...I guess I'm just lost...a little knowledge is dangerous...I have a little. Just enough to accomplish the basics..but the vernacular is LOST to me. Guess I'll have to wait for the Ubuntu apk...thanks for trying...
I've got this errors...(see attached files).
I have busybox 1.19, connectbot and the superuser (v2.3.6.3 and su binary v2.3.2, the latest from the maket)...
What can I do?
you guys are still lucky.your able to make it work...
im running the ongoing cm7 2.3.5 on moto defy...
kernel is not supporting this yet.
hailmary what's missing in your kernel ? I don't know any Android that won't have ext2 in; if you have an Android without any ext2 filesystem, please contact me in private, I know it could be done, and I would be VERY CURIOUS to see how HTC did it.
If you are missing loop support in kernel, try block or directory method. Blocck will require ext2; directory won't (but will work only over ext FS ... so ... unless you can use NFS )
dugryce , ScumpinatoS, I will come back later (maybe today, maybe not).
ScumpinatoS said:
I've got this errors...(see attached files).
I have busybox 1.19, connectbot and the superuser (v2.3.6.3 and su binary v2.3.2, the latest from the maket)...
What can I do?
Click to expand...
Click to collapse
Reading the first message, you as, as said, a CPU issue. What's your CPU ? device model ?
run in some console:
uname -a
which tail
Application could not load viable environment to work; it is an issue, but it can be fixed. I can help digging, but I won't give you any solution. Send an email to Galoula; the bug report system via the console should work for you.
doublehp said:
Reading the first message, you as, as said, a CPU issue. What's your CPU ? device model ?
run in some console:
uname -a
which tail
Application could not load viable environment to work; it is an issue, but it can be fixed. I can help digging, but I won't give you any solution. Send an email to Galoula; the bug report system via the console should work for you.
Click to expand...
Click to collapse
I have a Huawei Ideos CPU: MSM7225 without GPU.
I am use it and try install Ubuntu Natty but after download all deb package i get error installation, "issue binary, try other version"
Can someone help me what distro (Ubuntu/Debian) and what version of it that have installed succesfully.. please...
Sent from my GT-S5570 using XDA App
hey everyone,
so i finally got the dock for my TF a couple weeks ago.. i have several friends that are not as tech savvy as i am, but still like android, well i want to offer to root their devices for them. more out of curiosity then need i was wondering if it is possible to unlock and push the recovery from a TF? i know that the TF has ADB on it, but i havent really started any development on the TF its more for fun, i use my nexus 1 for development.. any light you can share on this would be appreciated.
Interesting...
Nice thread i hope some one comes up with further info about this idea i would like to do this too!!!! I have sold mi laptop TF can do everything... And soon W8 will be possible on it and STABLE Ubuntu!!!
I was contemplating this also since a girl I work with wanted me to root her Galaxy S1 but I only had my TF with me and we can't install drivers on the work computers.
I assume it should be possible, you just may need more of the Linux binaries, for example you may need to do it via a chroot install of Ubuntu or as a native (dual-boot) system. Look at the shell scripts and see what binary tools they require (cp, mv, cd etc...), you may be able to do it with Android's toolchain.
There's something in the market called "remote adb" which "might" be of use, but I kind of doubt it. It could also be one of those adbwireless versions of adb where you still do the heavy lifting from the PC.
My take would be to look at the results of google "+source +adb +android" and you'll get a couple of hits that point at adb repos in git format.
Then use a linux box to clone one and point it at some crossbuild tools (see for example the howto build kernel threads that are here and there) and built it for our architecture (arm{le}). I've done this for the bash shell and a few other things I liked in linux and it should be possible. One built, push it into /system/xbin, chmod 755 adb and see how things go.
I don't have the keyboard dock or the OTG dongle so no point in my doing it since I can't test.
Good luck -
edit: http://lackingrhoticity.blogspot.com/2010/02/how-to-build-adb-android-debugger.html seems like as good a place as any since it has source, instructions, etc. So probably all you have to do (if this nutty project will work at all) would be to modify the Makefile so that it's pointing to the toolchain for armv7le (or that's what uname -a shows on my eeepad).
edit: Another one that's already been built for android (I tested it), is sshd or dropbear and here is a link: http://jhulst.com/c/dropbear-ssh-android .
The main thing is being able to hit the device you want to setup using either ssh or scp, and functionally this'll do most if not all or more than adb will. What won't work are any scripts written that are already using adb commands.
thanks for the input originally i was thinking being able to use terminal inside honeycomb, but i suppose the easier (or perhaps better stated, the "road more traveled") route would be dual booting linux and just setting up the dev kit on there..
Latest version of ubuntu by little stevie is your best bet
I managed to port retroarch and a few notable cores to webos (webos 2.0 here) LG TVs. Cores I've tried and are running at full speed are gpsp, mgba, nestopia and snes9x. After a lot of work, I've also managed to get desmume2015 up and running with decent speed for some games; but about cores, particularly for desmume, I plan to start another thread. Maybe some of you could help regarding further speedup . Just let me know...
Right, so first things first. I'm not going to release executables, since there are many webos configurations, versions, hardware differences, libraries etc . Instead, the purpose of this thread is meant to be a discussion forum for people interested to get themselves retroarch up ad running. So, regarding requirements, you need a rooted tv, a dump of your 'rootfs' and a cross-compiler toolchain. I also assume you do your experiments under linux.
These are roughly the steps you'll have to follow:
1. Download retroarch 1.7.1 sources from here: https://github.com/libretro/RetroArch/releases
2. Extract the attached archive, in the directory RetroArch-1.7.1 (where you extracted the retroarch sources). This will overwrite qb/config.libs.sh and give you a few needed additional files, such as my configuration file for building retroarch; this is config_andy.sh.
3. Modify config_andy.sh and qb/config.libs.sh to fit your setup, see above. You'll have to be very careful here... sorry for that. Btw., some libraries such as all Qt could be removed since we do not compile the Qt GUI. We need wayland + EGL frontent.
4. Attempt to compile retroarch by runnig 'source config_andy.sh'.
Fingers crossed !
If you managed to compile retroarch, upload it to the TV and run it via ssh/telnet. You should see the retroarch GUI. Let me know how this first step goes...
Good luck !
Oye aún estas actualizando el retro arch? Estoy apunto de rootear mi tv
Did anyone compile this for WebOS 3.5-4.0 ?
Working on latest version?
Would this even somehow work on WebOS 5.1?
Hi, is this still in Development?
I installed retroarch and managed to get cores with the core downloader but I cant manage to get roms to appear in the usb or how to transfer them to the tv. Can someone help me?
Liquidgykill said:
Hi, is this still in Development?
I installed retroarch and managed to get cores with the core downloader but I cant manage to get roms to appear in the usb or how to transfer them to the tv. Can someone help me?
Click to expand...
Click to collapse
Use telnet, TV IP, user: root and password: alpine. The easy way is using WinSCP. The path is /media/developer/apps/usr/palm/applications/com.retroarch/.config/retroarch. The directory .config is hidden. And you can create the ROM directory and add rom files. If you get it works please tell us. Good luck.
LukeStage said:
Use telnet, TV IP, user: root and password: alpine. The easy way is using WinSCP. The path is /media/developer/apps/usr/palm/applications/com.retroarch/.config/retroarch. The directory .config is hidden. And you can create the ROM directory and add rom files. If you get it works please tell us. Good luck.
Click to expand...
Click to collapse
Hi, thanks for your reply, Im new to all these, what do I need to do that? Should I put my tv in developer mode? Im asking because the root guide says if webos is rooted dev mode should not be used. Do I need an usb cable from my tv to my pc or can be done wireless?
Liquidgykill said:
Hi, thanks for your reply, Im new to all these, what do I need to do that? Should I put my tv in developer mode? Im asking because the root guide says if webos is rooted dev mode should not be used. Do I need an usb cable from my tv to my pc or can be done wireless?
Click to expand...
Click to collapse
I'm new too. I have rooted tv and you don't need any cable. I don't know how to use the developer mode. Simply root the tv since https://rootmy.tv/ from your tv browser and find out the IP of your TV (I use by example the app of my phone called Fing). Install in your laptop the WinSCP, with the TV IP, the user is root and the password is alpine. After that you can connect with your tv even using linux commands if you want.
Im sorry, I dont know if Im missing any step.
I rooted my tv
in the homebrew channel I activated telnet and shh
from my tv settings I got my ip
I tried using scp with my IP but I dunno what protocol to use or what port to use
Conection attempts always fail
I dont know if Im sissing a step on my pc (Windows 10) or on the tv to be honest.
UPDATE: I was able to connect with the steps above on prot 22 and STPF protocol.
I downloaded retroarch from the hombrew channel
Retroarch by default comes with no cores so I used the Online updater - assets update and Online updater - update core info fies.
Also update your assets.
After that, you go to core downloader and Download any of the Supported cores on WebOs, in my case MGBA.
I put a GBA ROM in the directory: /media/developer/apps/usr/palm/applications/com.retroarch/.config/retroarch/downloads
since is a directory with its own shortcut inside Retroarch its easy to find it quickly.
Its incredible, WebOs runs pretty well GBA, its not perfect but its totally playable.
Im using a PS4 controller with USB cable in the back port of my tv and its recognized as an HID device, you can config the keys of the controller inside retroarch options.
THANK YOU @LukeStage and everyone that made this port possible.
Liquidgykill said:
Im sorry, I dont know if Im missing any step.
I rooted my tv
in the homebrew channel I activated telnet and shh
from my tv settings I got my ip
I tried using scp with my IP but I dunno what protocol to use or what port to use
Conection attempts always fail
I dont know if Im sissing a step on my pc (Windows 10) or on the tv to be honest.
UPDATE: I was able to connect with the steps above on prot 22 and STPF protocol.
Click to expand...
Click to collapse
If you want to investigate more you can take a look this thread. Is in spanish, https://forocoches.com/foro/showthread.php?t=9049603&highlight=ipk
You can use any translator addon with the browser to see it translated. like https://github.com/FilipePS/Traduzir-paginas-web
Im sure this is a silly question, but i could use a hand... i rooted my lg with rootmy.tv and installed retroarch... So when i try to telnet and change directories to the one listed above i get "permission denied." did i miss something post rootmy.tv? can anyone toss me a lifeline?sidenote - i do have ssh server and telnet on in the homebrew channel app.. i can telnet into it, but its like i dont have root access .... did i miss something/? i login with root alpine... also my command line shows - "[email protected]".
Edit. Sorry guys i think i got it. My bad
So i got the roms added to the specific folder but when i load them they show the file name at first but then all i get is a black screen. Is there a fix for this?
Edit. This was my mistake. I was trying to load the zip like a dumby. Simply unzipping and uploding the rom file to tv fixed this
Anyone know what version of mame emulator that will work? I been using sftp to add roms for snes and sega and stuff but i cant figure out how to install mame. System info shows webos is linux based but is there another version of emulator i can use? Droid or something like that? Also i wanna thank you for this port. It works great for me. Just need to figure out the mame emulator and how to load the full list of cores. Then it would be 100% perfect! But great job!!!
xtreme_protector said:
I managed to port retroarch and a few notable cores to webos (webos 2.0 here) LG TVs. Cores I've tried and are running at full speed are gpsp, mgba, nestopia and snes9x. After a lot of work, I've also managed to get desmume2015 up and running with decent speed for some games; but about cores, particularly for desmume, I plan to start another thread. Maybe some of you could help regarding further speedup . Just let me know...
Right, so first things first. I'm not going to release executables, since there are many webos configurations, versions, hardware differences, libraries etc . Instead, the purpose of this thread is meant to be a discussion forum for people interested to get themselves retroarch up ad running. So, regarding requirements, you need a rooted tv, a dump of your 'rootfs' and a cross-compiler toolchain. I also assume you do your experiments under linux.
These are roughly the steps you'll have to follow:
1. Download retroarch 1.7.1 sources from here: https://github.com/libretro/RetroArch/releases
2. Extract the attached archive, in the directory RetroArch-1.7.1 (where you extracted the retroarch sources). This will overwrite qb/config.libs.sh and give you a few needed additional files, such as my configuration file for building retroarch; this is config_andy.sh.
3. Modify config_andy.sh and qb/config.libs.sh to fit your setup, see above. You'll have to be very careful here... sorry for that. Btw., some libraries such as all Qt could be removed since we do not compile the Qt GUI. We need wayland + EGL frontent.
4. Attempt to compile retroarch by runnig 'source config_andy.sh'.
Fingers crossed !
If you managed to compile retroarch, upload it to the TV and run it via ssh/telnet. You should see the retroarch GUI. Let me know how this first step goes...
Good luck !
Click to expand...
Click to collapse
Great job bro. I installed through homebrew channel and add roms through sftp. Runs great. Audio can have a few hiccups here and there but nothing to complain about. I just posted below about mame. Any chance you could help me out sometime. I wanna add the mame emulator myself if i have to. Or may be explain how to add full core list to retroarch. Thanks again for this. Its amazing!
Liquidgykill said:
Hi, is this still in Development?
I installed retroarch and managed to get cores with the core downloader but I cant manage to get roms to appear in the usb or how to transfer them to the tv. Can someone help me?
Click to expand...
Click to collapse
I been using sftp to transfer to tv from my local host. Its easy and it works fine. Just make sure to extract the zip and upload the actual rom file
So this may be very helpful for all wh0 want to add cores that arent already in the app on webos
index - powered by h5ai v0.29.0 (https://larsjung.de/h5ai/)
index - powered by h5ai v0.29.0 (https://larsjung.de/h5ai/)
buildbot.libretro.com
I have a question. There is no other away apart from rooting my TV in order to put some roms in retroarch?
I plugged a pendrive into the TV with some roms, but I couldnt find the right folder in Retroarch explorer.
I don't want to root my TV
This is nice, contains every major 16bit system only one missing: TurboGrafx16 (PC engine in Japan)
Can you add the core to the online updater? There are many pc engine game for English translation nowadays, it would be nice if I actually can play them on my TV.
Kashi: read back the forum, pendrive are not working sadly, you can install winscp (telnet client) to copy game roms to the internal storage of your tv. Get the IP from the TV's network settings, username root password alpine and put the roms in the folder media/developer/apps/usr/palm/applications/com.retroarch/.config/retroarch
Kashi_ said:
I have a question. There is no other away apart from rooting my TV in order to put some roms in retroarch?
I plugged a pendrive into the TV with some roms, but I couldnt find the right folder in Retroarch explorer.
I don't want to root my TV
Click to expand...
Click to collapse
You can use the dev mode option. Install the dev add from the regular App Store on the TV and add the free dev mode option to your account. Then use this to side load retroarch to your tv. Downside there is a button in the dev app you need to read every 50 hours (I feel like John Loke in Lost) there are some automated options to renew the dev mode but I haven’t gotten them to work yet.