This was already mentioned by alansj here, but I though it was important enough to have it's own thread
Saurik has created a Debian image you can install onto your sd card. Once installed, you have the full power of debian on your phone. No more puny little busybox
Instructions and such are here.
Thanks Saurik!
I was actually looking into this earlier... let me know how it runs
cant download a few things
can not open ext2.ko......when i type insmod $kit/ext2.ko ...i get "insmod: can't open ' /sdcard/kit/ext2.ko'...some one please help me out
What graphical interface does this install, or is there one?
cbrunner said:
What graphical interface does this install, or is there one?
Click to expand...
Click to collapse
That was my question when I heard about this... I just went for it though because when I read through the instructions, I realized that everything is stored in the MicroSD card and in RAM (which is reset when the phone is rebooted)
It turns out that there is no GUI - just a good old text-based Debian install! I'm sure that someone will get one working... or maybe just port the entire BSD Subsystem along with apt so we can just forget the Market...
amgupt01 said:
That was my question when I heard about this... I just went for it though because when I read through the instructions, I realized that everything is stored in the MicroSD card and in RAM (which is reset when the phone is rebooted)
It turns out that there is no GUI - just a good old text-based Debian install! I'm sure that someone will get one working... or maybe just port the entire BSD Subsystem along with apt so we can just forget the Market...
Click to expand...
Click to collapse
This awesome article has answered tons of my questions and also seems to imply otherwise:
"This does not replace Android. This also gives you access to the full plethora of programs available in Debian and let's you continue using your phone as it was intended to be: as an Android device with all the capabilities thereof."
In addition, this IRC channel is where the author of that article idles.
cbrunner said:
This awesome article has answered tons of my questions and also seems to imply otherwise:
"This does not replace Android. This also gives you access to the full plethora of programs available in Debian and let's you continue using your phone as it was intended to be: as an Android device with all the capabilities thereof."
In addition, this IRC channel is where the author of that article idles.
Click to expand...
Click to collapse
Right. No gui, but you have a full working linux distro on your phone. You can apt-get just about any of the normal stuff.. You could probably even get a x-windows installation to working, although you would have to connect to it remotely - it would probably be "difficult" to get it to display a gui on the phone itself (although that would be sweet).
I've installed Saurik's image on my phone, it works great. Although if you do the "unionfs.sh" step, the wifi settings don't quite work right anymore. It won't let you enable or disable wifi.
But I was able to get an ssh server (with real user and password management) and even a samba server running on my phone quite easily with this . I've also got gcc installed, and will start playing around with developing directly on the phone (instead of having to cross compile).
Sorry for not being hip to the game, but what the heck is Debian?
donutman said:
Sorry for not being hip to the game, but what the heck is Debian?
Click to expand...
Click to collapse
Arguably the most influential distribution of Linux ever. Its package management system, apt, is awesome, and it is what Ubuntu and tons of other distros were started from.
Why would you not use Google before asking here?
can anyone help with my above mentioned problem
i want this baby to run
Is your phone connected to your computer? You lose access to the storage card when it is, I think (you can't cd to it when it's plugged in) and unplugging my phone allowed me to install the module.
/a
Installing Debian errors?
Here is what I get:
insmod $kit/ext2.ko
insmod: init_module '/sdcard/kit/ext2.ko' failed (Operation not permitted)
i've been through this, i'm not gonna explain what happens and why, but imo, the only way to get a real root is the following:
-Install telnet client to your device (from android market).
-Reboot your phone to be sure no telnet-daemons/shells are running.
-When you are on the desktop, just type "enter", "telnetd", "enter". (If you do it from the terminal app it will run under the uid of the terminal app which is not root).
-Then run the telnet client app, and connect to local host. (Or skip this step + the first one if you wanna connect from another pc)
I know it's weird, but when you run something from the terminal app it runs under the terminal app's uid, even if you run a new shell, you still are eg. "app_33", not root. and btw you will have to set the environment variables all from the same shell, that means you can't have a script cause it will run under another shell, with another uid. I'm so confused... maybe I'm wrong but android is not the most friendly environment.
aggtrfrad said:
i've been through this, i'm not gonna explain what happens and why, but imo, the only way to get a real root is the following:
-Install telnet client to your device (from android market).
-Reboot your phone to be sure no telnet-daemons/shells are running.
-When you are on the desktop, just type "enter", "telnetd", "enter". (If you do it from the terminal app it will run under the uid of the terminal app which is not root).
-Then run the telnet client app, and connect to local host. (Or skip this step + the first one if you wanna connect from another pc)
I know it's weird, but when you run something from the terminal app it runs under the terminal app's uid, even if you run a new shell, you still are eg. "app_33", not root. and btw you will have to set the environment variables all from the same shell, that means you can't have a script cause it will run under another shell, with another uid. I'm so confused... maybe I'm wrong but android is not the most friendly environment.
Click to expand...
Click to collapse
Haha I feel you. Now the thing is when I am at the home screen on my G1 i push "Enter" on the keyboard and then type "telnetd" and then push enter again it doesnt do anything. When I open up telnet client on my PC it wont connect with wifi on.
So I then go to Telnet client on myG1 and go to connect to "localhost:23" and it says "Error while connecting to server: localhost/127.0.0.1:23 - Connection refused" the thing is that my local host for my wifi is not 127.0.0.1:23
And when I "netstat" from inside Terminal Emulator there is no address with port "23"
ballaholyk84 said:
Haha I feel you. Now the thing is when I am at the home screen on my G1 i push "Enter" on the keyboard and then type "telnetd" and then push enter again it doesnt do anything. When I open up telnet client on my PC it wont connect with wifi on.
So I then go to Telnet client on myG1 and go to connect to "localhost:23" and it says "Error while connecting to server: localhost/127.0.0.1:23 - Connection refused" the thing is that my local host for my wifi is not 127.0.0.1:23
And when I "netstat" from inside Terminal Emulator there is no address with port "23"
Click to expand...
Click to collapse
Are you already running RC30?
SplasPood said:
Are you already running RC30?
Click to expand...
Click to collapse
Yes, I am running the Modified RC30 posted by JesusFreke
cbrunner said:
Why would you not use Google before asking here?
Click to expand...
Click to collapse
Because I wanted you to tell me baby. That is what a wife is suppose to do.
JesusFreke said:
Right. No gui, but you have a full working linux distro on your phone. You can apt-get just about any of the normal stuff.. You could probably even get a x-windows installation to working, although you would have to connect to it remotely - it would probably be "difficult" to get it to display a gui on the phone itself (although that would be sweet).
I've installed Saurik's image on my phone, it works great. Although if you do the "unionfs.sh" step, the wifi settings don't quite work right anymore. It won't let you enable or disable wifi.
But I was able to get an ssh server (with real user and password management) and even a samba server running on my phone quite easily with this . I've also got gcc installed, and will start playing around with developing directly on the phone (instead of having to cross compile).
Click to expand...
Click to collapse
What command did you use to get the SSH to install? Every time I do the one in the tut by saurik it errors and wont install all the way. I get an error after x11-common and it wont finish.
ballaholyk84 said:
So I then go to Telnet client on myG1 and go to connect to "localhost:23" and it says "Error while connecting to server: localhost/127.0.0.1:23 - Connection refused" the thing is that my local host for my wifi is not 127.0.0.1:23
Click to expand...
Click to collapse
localhost usually refers to the loopback interface which on most devices will be 127.0.0.1.
I'm getting the same thing here... I think there's something wrong with apt-get having to write to /tmp which does not exist (and is mounted read-only).
Related
I'm trying to get a window manager running under Debian. I'm using Xvfb and x11vnc. So far I've gotten the server up and running but I get a socket error on my vnc viewer after negotiating protocol. Anyone want to help?
Well, the clean way to display a X client on the phone would be IMHO to implement an x server in a windows. kind of like xming or xephyr. Too bad I don't know java
Anyway, using vnc looks like a smart idea. I worry about the performance, though.
I'll give it a try once I have re-installed debian on my ADP1 (trying to install it in a dedicated partition on the sd)
jusplainmike said:
I'm trying to get a window manager running under Debian. I'm using Xvfb and x11vnc. So far I've gotten the server up and running but I get a socket error on my vnc viewer after negotiating protocol. Anyone want to help?
Click to expand...
Click to collapse
Use X over SSH. Man I'll just write up a post.
I think he's trying to achieve X display on the phone, not on his computer.
Yes, I'm trying to get the display on the phone, not having to really on tunneling x11 over ssh.
I'm running a similar setup on my phone, in order to run X apps like xpdf. Works fine. Here's what you need:
In your debian chroot, apt-get install tightvncserver, and run it.
On the android side, run the android VNC viewer and connect to localhost:1 (or whatever display tightvncserver started). You'll get X on your screen.
You can apt-get and run a small window manager like twm if you need one. I generally use it without a window manager, with apps running in full-screen mode. For example, "xpdf -g 1024x768+0+0 some-file.pdf" to view a PDF. (at least until there's a decent PDF viewer for android).
Don't bother trying OpenOffice on it though. Too heavy - I actually tried it.
mod1 said:
I'm running a similar setup on my phone, in order to run X apps like xpdf. Works fine. Here's what you need:
In your debian chroot, apt-get install tightvncserver, and run it.
On the android side, run the android VNC viewer and connect to localhost:1 (or whatever display tightvncserver started). You'll get X on your screen.
You can apt-get and run a small window manager like twm if you need one. I generally use it without a window manager, with apps running in full-screen mode. For example, "xpdf -g 1024x768+0+0 some-file.pdf" to view a PDF. (at least until there's a decent PDF viewer for android).
Don't bother trying OpenOffice on it though. Too heavy - I actually tried it.
Click to expand...
Click to collapse
Are you telling me you got to run x app on the phone?
Yep, that's what I wrote. It was one of the first things I installed on the phone when I bought it. And performance is not as bad as I expected, as long as you don't try to run animation. Reasonable for reading a pdf.
Has anyone else tried this?
I cannot connect with android vnc viewer from my phone and tightvnc server running on debian showing "localhost:/#".
I am not using a password. I am trying to log in on vnc-viewer at 127.0.0.1 and have tried several ports including the default and 23.
mod1 said:
Yep, that's what I wrote. It was one of the first things I installed on the phone when I bought it. And performance is not as bad as I expected, as long as you don't try to run animation. Reasonable for reading a pdf.
Click to expand...
Click to collapse
Will i be abkle to run pidgin?
when i try to run vncserver it tells me that the USER envirioment variable i snot set
For the user variable error.Type su Again by itself before you start vnc. It has to do with now having set user in the enviroment set. I have an image that give you 2 gigs more of free space (uses up storage card) the current one only has 300megs free which limits you drastically and also a fixed script that you won't have to go into su again....
For the guys that can't get vnc working type localhost in the server field only and as for port use 5901... Use a password upon initial setup of vnc. Sorry about spekking errors but I'm half drunk and typing on g1
Okay I set up the password and stuff but when I go to the vnc viewer on the phone it does nto conect and the crash
When I go to vnc-viewer, I can log in but the window I get says--
Xsession:unable to start x session ---- no "/root/.xsession" ...no session managers,
Can someone please help me get this runing, my messenger is [email protected]
Okay I finally got it to run and get a grey screen, when i go t back to termina it is on android terminal not debian so I log back.
Now how to I run pidgin after I install it? just type pidgin?
I finally got pidgin runing!!!!
Rafase282 said:
I finally got pidgin runing!!!!
Click to expand...
Click to collapse
Now *that* would be a good reason to do this
JesusFreke said:
Now *that* would be a good reason to do this
Click to expand...
Click to collapse
I warn you it will be slow and still cant use the sub functions of the buttons form the keyboard to at least I don't know how. I'm trying to take a screenshot with the program from the windows manager, and i use twm
Okay I have tried with twm, vtwm, and icewm
So far I like icewm the most but still have vtwm for back up. It runs fine not as slow as before with twm. I have pidgin runing but still cant figure out how to run the screenshot program that comes with debian.
Can anyone tell me a way to get a screenshot in command line so I can show you the screen and prove that it works?
This is a program I wrote a while back that allows transparent tethering over USB without requiring root access. It works by simulating an unencrypted OpenVPN server and then internally running everything through a Java-based NAT. I get decent speeds off it, but your mileage may vary. It's a bit beta! Might explode! Wear eye protection!
It has a really basic website at http://lfx.org/azilink/, but to spare your eyes I'll just paste the instructions below:
Required files:
- ADB from the 1.1 SDK or from http://lfx.org/azilink/adb.zip
- OpenVPN 2.1 (not 2.0) from http://openvpn.net/index.php/downloads.html
- AziLink.apk from http://lfx.org/azilink/azilink.apk
- AziLink.ovpn from http://lfx.org/azilink/azilink.ovpn
Installation:
1) Install OpenVPN on the host. I use version 2.1_rc15, but any version should work. Apparently if you use version 2.0 you'll need to remove the NO_DELAY option from the AziLink.ovpn configuration file. You can find OpenVPN at:
http://openvpn.net/index.php/downloads.html
2) Enable USB debugging on the phone. From the home screen, this is under
Settings>Applications>Development>USB debugging.
3) Install the Android USB driver (if you don't already have one installed).
See http://code.google.com/android/intro/develop-and-debug.html#developingondevicehardware
4) Install the program. You can either use ADB to install by typing
"adb install azilink.apk" with the file in the current directory, or you can browse (on the phone!) to: http://lfx.org/azilink/azilink.apk
Either way you might need to allow installation from unknown sources
under Settings>Applications>Unknown Sources.
Configuration steps:
1) On the host, run "adb forward tcp:41927 tcp:41927" to set up port forwarding. Be sure to use adb from the Android 1.1 SDK! The version from 1.0 will lock up under heavy load. If you don't want to download the entire SDK, you can get a copy of ADB+drivers from http://lfx.org/azilink/adb.zip
2) On the phone, run AziLink and make sure "Service active" is checked.
3) Right click AziLink.ovpn on the host (not in the web browser!) and select "Start OpenVPN on this configuration file." You can find this file at: http://lfx.org/azilink/azilink.ovpn. If you're using Linux or, god forbid, MacOS, you'll also need to manually set the nameserver to 192.168.56.1 (the phone's NAT IP address).
Nice work around.
Wow, amazing work! I'll definitely have to mess around with this tomorrow...
OpenVPN 2.0.9
Thnx for the manual..!! Took me something to get it working, i'll find out, that it isn't working with OpenVPN version 2.0.9
OpenVPN 2.0.9 doesn't recognize the following rule in azilink.ovpn:
socket-flags TCP_NODELAY
And it worked with version 2.1rc15...
So no more Internet Sharing on Windows Mobile...
OpenVPN 2.0.9
Thnx for the manual..!! Took me sometime to get it working, i'll find out, that it isn't working with OpenVPN version 2.0.9
OpenVPN 2.0.9 doesn't recognize the following rule in azilink.ovpn:
socket-flags TCP_NODELAY
And it worked with version 2.1rc15...
So no more Internet Sharing on Windows Mobile...
help
Ok I'm a complete noob and I've played about with this but can't get it to work. How do I run adb? As in the very first step? Where do I type that. Do I need to install adb and how do I do it?
Thanks
Got it working
Man this is awesome.
I realised i needed to run the adb from cmd. see when i tried to open adb.exe it just kept closing.
thanks alot. this rocks
ps im writing this off my tethered pc
zecbmo said:
Ok I'm a complete noob and I've played about with this but can't get it to work. How do I run adb? As in the very first step? Where do I type that. Do I need to install adb and how do I do it?
Thanks
Click to expand...
Click to collapse
Nah, you can just unzip adb and run it directly from that folder. It's a command line program, so you'd need to run it from a command prompt (cmd.exe). I'm not sure whether adb needs to run as an administrator or not (I disable all that UAC garbage in Vista). If you have the proper driver installed, then the ADB command should return immediately without saying anything. If it says "waiting for device..." that means it wasn't able to find the Android debug driver.
I know this is all a bit hacky, but now that we've got root and wifi tethering I figured that there wouldn't be too much interest.
cheers
its working great like. im using this cus i havent rooted my phone yet. tethering was the only reason why i wanted to root it but this is a great alternative
Works Great. Thanks for the easy instructions.
Here is translation of post on Russian with images http://androidteam.ru/faq/azilink-tethering-with-android-usb.html
I have repacked all in one zip, and make some command files to make process a little easy.
another trick that may help on XP machines, probably other versions as well.
Create a shortcut to adb.exe on your windows desktop (mine is located in C:\and\tools)
Modify the 'target' (right-click,properties) of the shortcut to read C:\and\tools\adb.exe forward tcp:41927 tcp:41927 <I think this is the right code, I'm still using tetherbot on 1080>
That's it. Once everything's set up connecting is easy. one click on the computer, no cmds required
does this allow for media such as flash on web site to play on the laptop?
clevetbs said:
does this allow for media such as flash on web site to play on the laptop?
Click to expand...
Click to collapse
If you've got enough bandwidth. I'm not really sure what bitrate flash video runs at though.
Many thanks for this, aziwoqpd. I've not had the time to root, but have been looking for an easy way to tether. A usb connection is great, since the battery drains so quickly anyway it's nice to keep a charge going.
sonikamd - thanks for the suggestion, it's a great idea. Unfortunately my XP doesn't want to accept your syntax. I wish I could offer something else, but my skills (ha!) are nonexistant. I'm embarassed to say that I had to refresh my memory on how to maneuver around command lines...
Got any other suggestions?
Thanks again for all your work!
the AziLink.ovpn file wont download for me.
works fine for me, GREAT WORK!
Okay, so I'm trying this out on a mac. I've successfully built openvpn and have my tunneling device (/dev/tun0, /dev/tun1, etc.). I run the adb forward command and it starts the daemon successfully, I fire up azilink on the phone and it says it's waiting for the connection, I fire up openvpn and the phone changes to stating that it's connected. Openvpn does not exit out - it starts the tunnel - BUT in the logging it reports " ROUTE: problem writing to routing socket" twice (which oddly appears to be a non-fatal error to the application), and traffic is unable to flow. I'm guessing it's something about openvpn not correctly manipulating the darwin routing tables, but I've been unsuccessful thus far in figuring out the nature of the problem so I thought I'd check here.
I'm running the straight azilink openvpn config file, which means if I need any syntactical changes for darwin I haven't applied them. The openvpn documentation is not terribly good and I was unable to find any documentation of routing command differences for MacOS (if that's even the problem, of course).
Edit: I forgot to mention, I've been trying to ping known-good IPs by address to test the routing - after my first attempt at loading a web page failed I figured it best to remove name services from the possible list of problems. The bytes sent count was slowly incrementing (up to about 23K bytes in ten minutes of diagnosis), and the inbound count got up to about 900 bytes in the same period, so clearly *something* was getting through - unless those counters are counting all traffic into and out of the phone and just going over the cable - but I got no ping responses, no websites could load, and by all appearances from the terminal, no data was moving.
lindsayt said:
I'm running the straight azilink openvpn config file, which means if I need any syntactical changes for darwin I haven't applied them. The openvpn documentation is not terribly good and I was unable to find any documentation of routing command differences for MacOS (if that's even the problem, of course).
Edit: I forgot to mention, I've been trying to ping known-good IPs by address to test the routing - after my first attempt at loading a web page failed I figured it best to remove name services from the possible list of problems. The bytes sent count was slowly incrementing (up to about 23K bytes in ten minutes of diagnosis), and the inbound count got up to about 900 bytes in the same period, so clearly *something* was getting through - unless those counters are counting all traffic into and out of the phone and just going over the cable - but I got no ping responses, no websites could load, and by all appearances from the terminal, no data was moving.
Click to expand...
Click to collapse
The byte counters only include traffic that OpenVPN is forwarding, so something is making it over. Did you try changing the DNS server to either 192.168.56.1 or an external address like 4.2.2.2? OpenVPN on MacOS and Linux won't set the nameserver automatically.
Also, there's a bit of a problem with pinging. The app on the phone can't generate ICMP ping packets since it isn't running as root. When you send an ICMP ping, the phone translates it to a UDP ping, sends it, and translates the reply back to a ICMP ping. Unfortunately, probably about 50% of hosts don't reply to UDP pings. Some that I've tested with that do work are lfx.org and he.net.
I'll see if I can give it a quick test on a Mac sometime tomorrow.
EDIT: I managed to get it working, although T-Mobile's so-called "transparent" web proxy is barely working today so I was having trouble accessing websites without getting errors. SSH was working fine, though. Anyway, here's what I did:
1- Installed a MacOS port of OpenVPN called Tunnelblick (didn't have XCode handy to compile my own and it's got a pretty GUI)
2- Copied azilink.ovpn to /users/azi/library/openvpn or whatever it is
3- Click the Tunnelblick icon in the upper-right, go to details, click "set nameserver"
4- Remove the TCP_NODELAY line because it was complaining that my kernel didn't support it (and would cause my connection to timeout after about 30 seconds).
5- Clicked connect
If you want to see what traffic's going over openvpn, you can just run "sudo tcpdump -n -i tun0"
wow ... this works great ... tested using a german G1 under linux (arch 686), win vista (x64) & win xp (x86) ... pretty good speed and low latency (actually i can't notice any latency at all - no mather if using wlan or 3g)!
GREAT WORK!!!
I've got dropbear, ssh and scp running on my Epic so I thought I'd share.
http://www.elkins.org/dropbear.tar.gz
It's pretty simple to install:
0. Login as root
1. mount /system as rw
2. copy dropbear.tar.gz to /system/bin
3. cd /system/bin
4. tar xvf dropbear.tar.gz
Once that's done, you'll need to issue two commands:
1. /system/bin/mkdropbear.sh -- this command sets up your /data/dropbear directory and only has to be run once.
2. /system/bin/dropbear.sh -- This command needs to be run at system boot to start dropbear. It sets up dropbear with a default password of yourpass. You may want to edit dropbear.sh and change this. To start dropbear at boot, add the line dropbear.sh to Joey's playlogo script.
I haven't been able to get a passwordless login to work. Also, scp does not work directly on the phone. However, from your OS X /Linux pc you can:
scp yourphoneip:/directory/file . -- this copies a file from the phone to your pc
scp filename yourphoneip:/data/local -- this copies a file from your pc to the phone
when you try to ssh/scp directly from the phone to a pc it chokes on /dev/random or /dev/urandom. Not sure what's causing this...
what is it?
sweet thx! i'll give it a shot
whosdaman: its a ssh server
jgaikwad said:
sweet thx! i'll give it a shot
whosdaman: its a ssh server
Click to expand...
Click to collapse
A server running on a phone??? really?
Whosdaman said:
A server running on a phone??? really?
Click to expand...
Click to collapse
It's actually pretty common.
jocala said:
It's actually pretty common.
Click to expand...
Click to collapse
So what is an ssh server though, is that like a backup sever, or an email server or what can it be used as?
Whosdaman said:
So what is an ssh server though, is that like a backup sever, or an email server or what can it be used as?
Click to expand...
Click to collapse
It allows you to remotely login to a device and more.
http://en.wikipedia.org/wiki/Secure_Shell
Whosdaman said:
So what is an ssh server though, is that like a backup sever, or an email server or what can it be used as?
Click to expand...
Click to collapse
It stands for "Secure SHell"
It's a remote terminal for your phone. You can use SCP to copy files to/from the phone, and with dropbear (or any SSH server for that matter) you can SSH into your phone and get shell access.
Not very useful for the average user, but pretty cool if you're a power user
EDIT: Well seems like jocala beat me to it but yeah
Geniusdog254 said:
It stands for "Secure SHell"
It's a remote terminal for your phone. You can use SCP to copy files to/from the phone, and with dropbear (or any SSH server for that matter) you can SSH into your phone and get shell access.
Not very useful for the average user, but pretty cool if you're a power user
EDIT: Well seems like jocala beat me to it but yeah
Click to expand...
Click to collapse
Well I'm a developer and all and I'm just gathering as much information as I can and collecting everything I can find. However, I work for an indirect dealer for Sprint and I have basically sold all of my co-workers on getting the Samsung Epic. And our store itself has 8 servers it is running due to the other half being a business phone system. So I think the head guy and a few of the others might be very interested
This is easier than making a cup of coffee.
Pictures below as attachment couldnt figure how to put the pic here edit figured it out now im just lazy.
you dont have to do it the hard way
Everyone (edit: i thought so at the time)will want this "Fully" (note below) funtioning Ubuntu system
or you can make your own here: http://forum.xda-developers.com/showthread.php?t=913622
I will be maintaning and updating as time permits
Phone has to be rooted: http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/Guides_&_Tutorials
NEW IMAGE 3.5 gigibyte
Lucid base image (only added: lxde and tightvncserver): Zip http://www.megaupload.com/?d=GLMYVCMN User: "dad" Passwd:ffffffff
Remove app2sd and settings- applications- manage applications- sdcard "move all apps to phone" or it will not work!
I suggest you install gnome-panel
I use it and i find no speed differance!
trying to get :upstart services" to work im looking into compiling a kernel with "CONFIG_TMPFS enabled, to initiate a workaround, because "upstart" services wont work in a chroot.
Stock Maverick : http://www.megaupload.com/?d=56AT71WD
Karmic Sucks programs stop opening after some short time, so i gave up.
Tested with: CM7 http://mirror.teamdouche.net/get/supersonic/update-cm-7.0.0-RC1-Supersonic-signed.zip
CM6: http://mirror.teamdouche.net/get/supersonic/update-cm-6.1.2-Supersonic-signed.zip
myn-WarmTwoPointTwo-11-05-2010-RLS-3
Unzip
Copy the "ubuntu" folder to your sd card
Go to market download "Terminal" and android VNC Viewer
Open terminal and type: (without the quotes), "su" then "cd /sdcard/ubuntu"
then "sh ./ubuntu.sh"
then "bootubuntu"
then "vncserver :0 -geometry 1024x800"
Thats it, go to android VNC Viewer and use dad for nickname, "ffffffff" for the password, "localhost", for address, 5900 for the port, Use 24bit veiwing settings, then go.
to shutdown you will have to power off phone and power back on.
Enter in your :"Initial Command",in the settings of Android Terminal:
su
cd /sdcard/ubuntu
sh ./ubuntu.sh
bootubuntu
So everytime you want to start ubuntu just open terminal
to start VNC SERVER automaticly you will have to add to the bottom of your /home/.bashrc file this:
cd /
rm -r -f /tmp
mkdir /tmp
vncserver :0 -geometry 1024x800
Thats it, your off ENJOY
Notes: Its as fully funtioning for myself, cant speak for everyone
This is in Beta stages I am an old Visual Basic dabbler as a hobby, and am not very fluent in the lenux operating system. However this "ubuntu on mobile device" has rekindled a lost desire to program.
I will update changes as i get the time
If anyone would like to contribute their lenux expertese to iron out the bugs, i and so many others would appreciate it
Issues to work on:
:no sound
NOTE: A big kernel level problem is the lack of sound. Most of the kernels we use as a base for our ports are designed for Google Android. Android doesn't use the standard Linux sound System ALSA. An ALSA wrapper for the EVO DSP kernel system must be written.
:Setting up users and groups (used kusers but seemed to slow system a bit, needs kde-common) But is very tolorable, I actually use dolphin. (cant get nautilus to create folders or files (destination read only? u got me)).
:hacked /root/.bashrc for easy login help (when using terminal runs .bashrc. dont know anotherway to start hamachi on login and also vncserver tries to restart)
:keyboard mapping (mapping arrow keys to the abc keyboard it has arrow keys, esc,etc...)
: No way to exit or turn off ubuntu. You have to turn off phone, to turn off ubuntu.
nce in a while the programs refuse to open, it has somthing to do with ?. you have to restart ubuntu again.
I suppose a fluent ubuntu/lenux person could help change usernames and such, using the terminal,set proper permissions and such
Im using CyanogenMod Rom its the only one that works with Hamachi
your rom will most likely work, however networking wont!
Tips:
ownload VNC for your computer and modify your ubuntu desktop on your computer screen (that way i dont need my glasses) (use "ifconfig" to find ip address)
:You can even use VNC to view the build while in qemu emulation, after installing lxde and tightvncserver in the emulation. (watch out for seg faults)
:In terminal, preferances-initial command, enter the "cd /sdcard/ubuntu ...etc ," that way its a one click to login .
:Get "abc keyboard" from market it has the esc, arrow keys etc... ( extra keys only good outside chroot, the "terminal", on your android desktop)
:If your not familiar with ubuntu, you use synaptic package manager to install programs
:When u share over himachi or start smbd, programs will stop opening.
.
Trust me everything i want it use it for seems to be pretty zippy, but just give a little xtra time for programs to load the first time. (Firefox may take 90 sec. to load the first time. After that its a snap)
I Would like to check into this
The no sound issue is getting to me, I may wait for that as that is an essential to my all in one device.
THANKS FOR THE HARD WORK. I LOVE UBUNTU
you really have to try it and tell everyone about it cant believe its not one of the hottest topics
I Would like to check into this
any way to delete this post....didn't mean to submit, came back to send like i didn't send it but ending up sending twice
apologies
Sounds pretty cool, I will defiantly have to give this a try. Question though, is this installing over top of the rom I am currently using. Example I am using the MIUI 1.22, if I install this is this like dual booting or will it just uninstall every time I reboot the phone??
Is it still uploading? I really want to try this!
corybucher said:
Sounds pretty cool, I will defiantly have to give this a try. Question though, is this installing over top of the rom I am currently using. Example I am using the MIUI 1.22, if I install this is this like dual booting or will it just uninstall every time I reboot the phone??
Click to expand...
Click to collapse
This will sit on your sdcard and ride side by side with your android system (you can use your phone at the same time)
IT DOES NOT EFFECT YOUR PHONE IN ANY WAY
wasnt shouting just wanted everyone to see
ioos said:
Is it still uploading? I really want to try this!
Click to expand...
Click to collapse
Download away!
This is awesome! I can't wait to get home and give it a try.
This is gonna be a great weekend. Between this and the flashable ROMs that are starting to roll out for my nook color, I might be sprouting antennae by Monday.
So wep cracking soon...? That's about the only thing I want/need Linux for.
Sent from the void...
wuclan48 said:
So wep cracking soon...? That's about the only thing I want/need Linux for.
Sent from the void...
Click to expand...
Click to collapse
How would one go about this "wep cracking thing"
please explain further
Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)
**most wpa specifications are not crackable yet and those that are often have a very stringent set of requirements (off the top of my head: most require someone to be legitimately connected to the access point and very simple passwords with low encryption.
On topic, though, this is sweet. Hope I can get something like this on my galaxy tab too!
EDIT: If you really need to know this (please only for testing... not to mooch people's internet) Google "wep cracking on backtrack"
The short simple answer is you sniff packets that the wireless access points send out and manipulate them to decrypt the key.
EDIT 2: I just realized you are also the guy who made this. Let me answer a few questions.
1) For audio you probably need to find a way to register the hardware with a Linux Audio Mixer. I'm guessing Ubuntu uses ALSA? I'd have to look that up
2) For users, kusers is part of the KDE desktop system. Ubuntu uses GNOME. People generally only use one or the other (unless they're trying to show off). That's probably why it either a) won't work or b) not work well and take up lots of extra space
3) It's Linux, not Lenux (but that's fine I can sense English isn't your first language... it's not mine either, but that's fine ^^)
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Sorry i just used the wizard and made a zip file with winzip 12.1
Quote"Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)"
Thanks for the info
laydros said:
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Click to expand...
Click to collapse
shame on me .
Your right im a noob and really know too much about it yet i just like having ubuntu on my phone.
Ill do better next time
People talking about cracking WEP and stuff, this probably doesn't have a driver to put the wireless card to put the card in monitor mode.
laydros said:
the download has a "zipx" extension.
I did a little googling and it looks like that is winzips new default compression method, and the only way to open the archive is with winzip, bitzipper, pkzip, or a couple of others. none of the compression utilities I typically use (7zip on Windows, unarchiver on mac) seem to support it.
Edit: sorry if I sound unappreciative, I just think its funny to use a proprietary closed format for distribution of software that is all about open software and formats. I'm currently trying to find something that will open this on the mac without being a scummy trial, or ill just do it on a pc.
Click to expand...
Click to collapse
Have the same problems, did you happen to find anything to open it with? I searched a little on google myself but all I find is software that needs to be purchased.
Homefix said:
Quote"Almost* all WEP and some** WPA wireless passwords can be cracked. IMHO its easiest to do this on a Linux machine (please take note I love all OSs equally!)
*I forget how accurate this is but some WEP keys(like crazy long ones) can cause problems l in cracking, thus being protected (though not by design)"
Thanks for the info
Click to expand...
Click to collapse
AFAIK, WEP can be easily cracked. WPA or WPA2 though, will require bruteforcing, there is no way around it.
corybucher said:
Have the same problems, did you happen to find anything to open it with? I searched a little on google myself but all I find is software that needs to be purchased.
Click to expand...
Click to collapse
I will repackage it, but it might take 3-4 hrs to upload, sorry.
ill get right on it
https://market.android.com/details?id=com.galoula.LinuxInstall
New every thing. Redesign of everything every where, rewite of all English parts, many bug fixes.
What for ? install Debian using debootstrap in chroot, and use your Android device like if you had installed Linux on a standard computer.
Bugs shall be reported to [email protected] .
Misc questions about how to use and feature request and general discussions to [email protected]
Market description:
This application will allow you to install a complete Debian distribution in your Android device. Based on chroot, it will perform a standard debootstrap and install a legacy Debian so that you can install, and run any classic Linux command, tool, daemon or service.
The package has few limitations; it is not restricted to Debian; we already offer the choice to use Ubuntu, and will add more distributions in close future. Each distribution is available in several tastes (stable, testing ...). It will not require to reboot; chroot is run inside Android. Installation can be done on any storage device, either on SD card, or inernal memory; no need to repartition any thing, run mkfs or fdisk. We do with what you let use. If you have almost nothing, the package will manage with almost nothing; if you can afford for a large ext4 partition on your SD card, the package will be happy to use it.
It will allow you to install all classic LAMP services like Apache, MySql, PHP, Samba, Netatalk, or just any classic Linux tool like vim, xterm, aterm, Abiword, Firefox, dillo, wget, cron, Perl, Python ... just everything.
Package utilisation will require a rooted device.
Reasons to install this package can not be listed. Just too many: want a cron daemon ? want to have gcc inside your phone ? want to recompile some kernel driver because the legacy Android driver for your Wi-Fi card has is bogus or limited ? want to use vim, or the real full featured desktop ls, ip, nmap, or top commands ? this package will give you all this for free, and much much more.
Requierments:
- an Android device based on some Linux kernel
- a rooted environment
- 300M free space
That's all.
Optionnal registration on our website, http://android.galoula.com/LinuxInstall/Register.php , will allow you to use advanced management features, and install package from within the application interface. You will not need to type any strange command in any terminal. And you will be able to make some services start automaticly at phone boot, and/or application start.
Online documentation: http://android.galoula.com/en/LinuxInstall/
Quick installation guide: http://android.galoula.com/en/LinuxInstall/QuickTutorial.html
Click to expand...
Click to collapse
Free space must be on sd-card or phone memory?
Both accepted You choose where to install.
500M by default on SD card using loop method (on ext2 or fat). Down to 180M using the directory method (does not work on FAT).
thanks for this man.
Sorry if this is a noob question but will this in any way brick/soft brick my device?
Sent from my GT540RR using XDA App
Yes, it can.
But this app is underdevelopment since almost two years, and nobody ever bricked yet. I have written a very long complete tutorial, where I say what you should NOT do. I could easily tell you how to brick in 5 steps.
But we have been working very hard on default settings, to make default settings as much safe as possible.
There are many bugs, many known bugs; but 99.999% bugs will just make the chroot not work. Data loss is very rare. Data loss was highly probable in previous version 3.2 . But default settings are now safer. And if you do not do what we claim to be dangerous ... you are safe.
The most frequent case with 3.2 was complete wipe of /sdcard and /data . This have been fixed.
We never ran into wipe of /system until now. Never bricked.
And since Galoula and me are working on it, we are the most exposed ones. We test every single feature, in all possible situations. And when we find a wipe case, we repro it dozen time until we understand why, and how to fix, so that it won't happen to YOU.
3.3 is way safer than 3.2. And nobody reported wipe on 3.2 ...
But if you blindely clik any where, yes it can. And if I tell you where to click, you can brick in 5 steps for sure And it won't be a soft brick. I promise a good real brick where even HTC will be in trouble to repair it It's explained in the tutorial.
Wow. Thanks for the reply. At least i have an idea now. Is the tut on the app itself? I'll nake sure to read it very carefully coz i wanna learn all about this stuff
Sent from my GT540RR using XDA App
A not so short tuto is inside; but since most mobile devices have only one screen, you may want to read the online tuto on your computer: http://android.galoula.com/en/LinuxInstall/
Default settings are safe. Just follow the guide.
Will go ahead and read this tut. I'll make sure to give feedback. Thanks for paying attention to this noob
Sent from my GT540RR using XDA App
this is just great, are there any videos or screen shots?
edit: nevermind i just checked the market
Feel free to send us screen shots; I am not good at doing that (i can to shots, but I don't know what could be nice to upload).
We would apreciate shots of working (of course ) VNC clients connected to server running localy, or local consoles (like Connectbot) doing funny things.
Send to support. Thanks.
Spent the whole weekend on this...
I'm trying o get an X- GUI on the Samsung Captivate, (hope i said that right) like Ubuntu so i can VNC to a linux desktop environment. I'm on FASTY and wondering why I keep running into refusal of connection. I have the password and localhost as well as the port correct. I've lost sleep on making this work. Can anyone help...?
You question is somehow off topic.
You seem to have a basic VNC connexion issue.
Could not help without deeper description. And I rarely use VNC, i have very low experience.
First point: do you have free space in the distro ? depending on installation method, and what you installed, you may have run out of disk space (especially Ubuntu, uses lot more than Legacy Debian).
The distribution manager is still beta AOT. It may report the VNC service to be up and running, when it could not rally run. First thing to check is: is it up ?
- from local machine, to ps, and check if process is up
- from remote machine, just scan your IP for the device. VNC should be port 5800 or 5900, forgot which one.
Your VNC password is *NOT* your distribution password. VNC password need to be set at a different place (this is VNC specific; VNC is not UNIX, and never claimed to be fully a *UNIX "merged" service*).
Never used VNC in LinuxInstaller. Never yet. Not enough time to test it. We take report, and will test only major and frequent issues. We have many "easy success" reports, so, we don't worry about it. We have much more issues about rooting (getting root on phone), and starting debootstrap; this is what we focus on.
Make sure you have enough free space (at least 50M free left), then join any Debian or Ubuntu forum. They will ask you if you have a CLI; you shall use either adb shell, or connectbot. Fact you are in a chroot is not an issue, chrooting is not frequent for debian users, chrooting is the normal procedure to install Gentoo; and all debootstrap users use chroot daily; forums should not reject you for this reason. As long as you have a CLI.
Good luck.
Lost me fast...
Sorry..but you lost me, and FAST! I really don't have the terminology down...but I do have the Linux 3.3 Installer running properly...it indicates so. I was assuming that this would allow me to somehow load Ubuntu on my Captivate..as I've seen on some screen shots...I guess I'm just lost...a little knowledge is dangerous...I have a little. Just enough to accomplish the basics..but the vernacular is LOST to me. Guess I'll have to wait for the Ubuntu apk...thanks for trying...
I've got this errors...(see attached files).
I have busybox 1.19, connectbot and the superuser (v2.3.6.3 and su binary v2.3.2, the latest from the maket)...
What can I do?
you guys are still lucky.your able to make it work...
im running the ongoing cm7 2.3.5 on moto defy...
kernel is not supporting this yet.
hailmary what's missing in your kernel ? I don't know any Android that won't have ext2 in; if you have an Android without any ext2 filesystem, please contact me in private, I know it could be done, and I would be VERY CURIOUS to see how HTC did it.
If you are missing loop support in kernel, try block or directory method. Blocck will require ext2; directory won't (but will work only over ext FS ... so ... unless you can use NFS )
dugryce , ScumpinatoS, I will come back later (maybe today, maybe not).
ScumpinatoS said:
I've got this errors...(see attached files).
I have busybox 1.19, connectbot and the superuser (v2.3.6.3 and su binary v2.3.2, the latest from the maket)...
What can I do?
Click to expand...
Click to collapse
Reading the first message, you as, as said, a CPU issue. What's your CPU ? device model ?
run in some console:
uname -a
which tail
Application could not load viable environment to work; it is an issue, but it can be fixed. I can help digging, but I won't give you any solution. Send an email to Galoula; the bug report system via the console should work for you.
doublehp said:
Reading the first message, you as, as said, a CPU issue. What's your CPU ? device model ?
run in some console:
uname -a
which tail
Application could not load viable environment to work; it is an issue, but it can be fixed. I can help digging, but I won't give you any solution. Send an email to Galoula; the bug report system via the console should work for you.
Click to expand...
Click to collapse
I have a Huawei Ideos CPU: MSM7225 without GPU.
I am use it and try install Ubuntu Natty but after download all deb package i get error installation, "issue binary, try other version"
Can someone help me what distro (Ubuntu/Debian) and what version of it that have installed succesfully.. please...
Sent from my GT-S5570 using XDA App