Database Info

[Q] Bezel around the screen - replacement??

Hi
I have damaged the metallic black bezel around the screen at a few places (especially the part above the micro usb port). I guess it is called Faceplate.
What I wanted to know is if I can replace this part somehow. If I look at the region under the screen after opening the slider, it appears as if it can come off.
If it is possible to replace it, does anyone know where can I buy one of these?? I have googled but could not find anything.

I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204

---UFO--- said:
I have found only a full cover. Try searching milestone 2 housing on eBay.
Or here is the link:
http://www.ebay.de/itm/Cover-Housing-for-Motorola-A955-Droid-2-Milestone-A-955-/300572186204
Click to expand...
Click to collapse
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??

sahilarora911 said:
Thanks dude. Now I have to find someone who can deliver it to India. BTW are you sure Droid 2 is physically exactly same as Milestone 2. They do appear same. Just wanted to know if someone has used this cover etc. Plus anything on the quality??
Click to expand...
Click to collapse
I've ordered one from the link above and I should receive it in the next 7-14 days so I'll let you know how I go but I'm 100% confident that the physical housing between the MS2 and D2 are identical.

I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.

Well I have managed to knick the display input cable and now have a one centimetre row smack in the middle of the screen that won't respond to touch. My fault, I thought I'd taken care to ensure no damage to some of these fragile cables but alas no
So, just ordered a SGII Stick that where the sun doesn't shine Motorola! Yeah, I know you couldn't care less but I feel better

Well thanks for the info. I won't have the luxury of buying a new one if I ruin my MS2 so I guess I'll stick with a little wear and tear. BTW nice buy!!

Or just take it to your nearest phone repair shop and they'll sort it out. =D

MegaBubbletea said:
Or just take it to your nearest phone repair shop and they'll sort it out. =D
Click to expand...
Click to collapse
Funny bugga, this is BrisVegas!

nurofenplus said:
Funny bugga, this is BrisVegas!
Click to expand...
Click to collapse
Haha true
Sent from my MotoA953 using xda premium

nurofenplus said:
I have received the housing (from the eBay link above) and fitted it last night. The case is a Verizon stamped unit and is 100% perfect, next time I think I'll just live with the worn look. Very fiddly job but does give you an appreciation of the engineering ... They use a lot of adhesive, pita.
Click to expand...
Click to collapse
How does the housing attach to the digitizer/glass? Because the tutorial I found on iFixit didn't detach the digitizer from the housing.
My housing cracked badly, I "fixed" a corner with superglue, but I think it permeated through the digitizer, so there's a strip in the left side (the one with the MENU button) which is insensitive. Another drop and the whole top part fell off and I don't intend to glue this one. Probably I'll buy a new front panel and a new digitizer, but I need to know if I'll be able to attach them at home or if I'll need some adhesive (yuck).
Thanks in advance! :fingers-crossed:

[Q] Sidekick 4g glass broken

Hello all,
The glass cover on my sidekick got broken accidentally. The LCD works fine.
I'm planning to get a replacement front panel glass.
I found the following link on ebay
http://www.ebay.com/itm/Tmobile-Sam...ultDomain_0&hash=item2c605f3c7e#ht_2045wt_905
Is this an original OEM part as described? After it's replaced will it work as good as the original?
Any other options other than the above ebay link?
Please help!
Regards,
sammydude

God only knows. It'll probably work though.

Sorry this is late, but the ribbin cable and glass seem to be just like the original. Let us know how it went.
Sent from my SGH-T839 using XDA Premium App

How did you break it? I'm asking only because I know this is a pretty durable phone, I've already dropped it screen first on gravel, without a scratch to show of it.

This looks legit to me. Digitizer is the key word. I've replaced many of these on different phones. As long as it's a ditizer for the correct phone model number. Are you doing this yourself? There should be some good tutorials on disassembly on youtube.

AFAinHD said:
How did you break it? I'm asking only because I know this is a pretty durable phone, I've already dropped it screen first on gravel, without a scratch to show of it.
Click to expand...
Click to collapse
@AFAinHD It was bizarre! My watch was on a chair. My wife threw my watch onto the bed saying "here it is. keep it ". The metal part of the watch fell on the mobile (the bevel part of the glass). You could imagine our shock after that!!

teddyspaghetti said:
This looks legit to me. Digitizer is the key word. I've replaced many of these on different phones. As long as it's a ditizer for the correct phone model number. Are you doing this yourself? There should be some good tutorials on disassembly on youtube.
Click to expand...
Click to collapse
Not planning to do this myself. There's a good servicing person (freelancer) for all kinds of mobiles. Planning to give it to him.

Thank you all for your replies! Planning to go for it. Will let you all know how it went! Just hope I'm able to get it back to its original condition. Hmmm...

sammydude said:
@AFAinHD It was bizarre! My watch was on a chair. My wife threw my watch onto the bed saying "here it is. keep it ". The metal part of the watch fell on the mobile (the bevel part of the glass). You could imagine our shock after that!!
Click to expand...
Click to collapse
I don't think she could have hit it more perfectly.
Remember to hit the thanks button if I helped! It only takes a second!

sammydude said:
Hello all,
The glass cover on my sidekick got broken accidentally. The LCD works fine.
I'm planning to get a replacement front panel glass.
I found the following link on ebay
LINK
Is this an original OEM part as described? After it's replaced will it work as good as the original?
Any other options other than the above ebay link?
Please help!
Regards,
sammydude
Click to expand...
Click to collapse
ok so that ebay link says that it costs $50 and paying someone to put it in idk how much but i can get a replacement from TMO from insurance for 90+10 for shipping, i think ill get a new one and sell this one to the guy at the shop for 75 lol. mines cracked over the FFC so it only looks bad it works fine

Cracked Screen Need Digitizer

Hi,
I've scratched my screen pretty deep . I will like to replace the screen and get a new digitizer but haven't found any online.
Has anyone had luck finding a Samsung Galaxy Tab Plus GT-P6200 Digitizer?
Thanks!
Yavila

Sorry to hear that...I would have cried a little. Best of luck fixing it.

aaronuser said:
Sorry to hear that...I would have cried a little. Best of luck fixing it.
Click to expand...
Click to collapse
Believe me, my soul weeps every time i see that scratch... its end to end

sorry to tell you but i really don't think their will be any for sale for a log time i mean like 5months as this is still a baby device but have you tried claiming on your house insurance that's what i did with my nexus s last year

they have the digitizers on ebay now
I ordered a replacement digitizer on ebay about 3 weeks ago. They ship free from Hong Kong and the sellers all say that it takes at least 3 weeks for delivery. More sellers are there now with the digitizers. I cannot find a teardown video anywhere. Also, some repair shops fix the old p1000 but not the tab plus.
You definately want the tools to come with the replacement digitizer. I'll give it a shot blindly if I don't find directions and post how it comes out.... hopefully from this device!

i fixed cracked glass yesterday
The directions for the p1000 screen teardown pretty much worked. I used a hairdryer an an exacto knife to separate the digitize from the lcd. This was tricky. Of course you know to always push the knife away from you lest you cut your wrist.
An eyeglass cleaning towel worked to clear off the lcd. I didn't want to risk any solutions on it.
Prices on digitizers are dropping on ebay. I paid 75 for the kit and it is about $10 cheaper. Shipping does take long!

rp518dan said:
The directions for the p1000 screen teardown pretty much worked. I used a hairdryer an an exacto knife to separate the digitize from the lcd. This was tricky. Of course you know to always push the knife away from you lest you cut your wrist.
An eyeglass cleaning towel worked to clear off the lcd. I didn't want to risk any solutions on it.
Prices on digitizers are dropping on ebay. I paid 75 for the kit and it is about $10 cheaper. Shipping does take long!
Click to expand...
Click to collapse
Any chance you can provide a link from where you got the digitizer and a tutorial. Mine fell from my pocket and the screen cracked :crying: , and i cant find any replacement for it or tutorial. A little help plz!!!

Check out my thread on the same topic. I replaced my glass a while ago. http://forum.xda-developers.com/showthread.php?t=1790232

Ebay has digitizers
didujo said:
Any chance you can provide a link from where you got the digitizer and a tutorial. Mine fell from my pocket and the screen cracked :crying: , and i cant find any replacement for it or tutorial. A little help plz!!!
Click to expand...
Click to collapse
You just need to make sure you are getting the correct digitizer from a well rated seller. It's an easy ebay search. Also, you need the tool kit. The concept is to slide the tool around the space between the glass and case to release the catches. YouTube has lots of videos on the topic. It was a while ago when I did mine and used the T1000 directions. There may be a video with the 7 plus by now.
Using a hair dryer to heat the glass is critical. It softens the adhesive and makes it less dangerous. An exacto knife, glass and lots of force is asking for a trip to the emergency room. Let the heat do its job and always work the knige AWAY from your body while supporting the assembly on a firm surface.
Taking your time is crucial. The job's not that hard as long as you stay organized and don't force it.

By any chance, has anybody purchased a digitizer that doesn't have the Samsung logo on it? I'm kicking around the idea of replacing the digitizer to give my tablet a cleaner look on the front.

yavila said:
Hi,
I've scratched my screen pretty deep . I will like to replace the screen and get a new digitizer but haven't found any online.
Has anyone had luck finding a Samsung Galaxy Tab Plus GT-P6200 Digitizer?
Thanks!
Yavila
Click to expand...
Click to collapse
Hey!! I found it here!!
Its cheaper than Ebay and it is original!!
Even i had got a deep scratch and i replaced it myself!!
Go To www dot gounlock dot com
Then go to Tablets And then samusng and choose p6200 and then order the digitizer..
Wish You Luck!!:good::good::good:

roshanrx said:
Hey!! I found it here!!
Its cheaper than Ebay and it is original!!
Even i had got a deep scratch and i replaced it myself!!
Go To www dot gounlock dot com
Then go to Tablets And then samusng and choose p6200 and then order the digitizer..
Wish You Luck!!:good::good::good:
Click to expand...
Click to collapse
I have replacement which I will do myself. Question: after seperating original LCD from digitizer with heat, How did you line up the new one? Or does it fit right into place? Also is there glue material on the new digitizer as Ive been told?
Thank You.

FIXED: One Solution on how to replace a broken Camera Glass Cover on SG3

So I stupidly had my case off my phone and dropped my phone taking it out of my pocket. It didn't drop that far but dropped just far enough to crack the glass covering the camera lens. So I needed to find a way to fix the cracked camera cover, preferably without much cost. I had no insurance and didn't buy through Verizon or a store.
Possible Options:
1. Having Samsung fix it. Would have to send it to them, would cost at least $70 plus, but possibly more. Would most likely be without the phone for 3 weeks (my guess). And they would wipe my phone and set it back to factory state. This would mean I would lose my unlocked bootloader, most likely. I really didn't like that option.
2. Buy a broken damaged phone that had the chassis with camera cover still in good condition. Unfortunately, finding a broken phone that wasn't expensive was impossible. SG3s on ebay with broken front LCDs were still going for $200-$300, which I thought was crazy. I even found a completely non-functioning phone that wouldn't turn on that sold for $150! vPrices as of this writing.
3. Order i9300 replacement chassis and camera cover. The i9300 version looked identical and several people thought it would work on the VZW SCH-535 version.
http://www.ebay.com/itm/New-camera-...ccessories&hash=item41688e2be1#ht_2658wt_1271
First Fix (unsuccessful):
I went with the i9300 replacement part option. While initially, I thought I was good to go. After further examination, two problems arose.
1. The bottom of the device has an exposed hole that the VZW SG3 doesn't have.
2. The bottom grooves, raised parts, and and two copper looking objects by the SIM card weren't allowing it to sit flush like the OEM part. I debated on trying to force the screws in...but decided that wouldn't work mainly because of the covered parts by the SIM card.
Looking at the picture you can see the exposed round hole towards the bottom of the i9300 part (bottom piece) and the additional opening on the OEM part by the SIM card (top piece) that isn' there on the i9300 replacement piece.
So at this point, I really wasn't sure what I was going to do. Then thankfully, Smoke314 provided some advice in this thread that worked! :good:
FIX THAT WORKED:
I took Smoke314's advice and removed the camera cover from the i9300 replacement part that didn't fit in the VZW SG3. It removed fairly easy with a flathead screwdriver. I did lose the use of the bond, but was able to put the new camera cover into my existing chassis. It doesn't fall out because of the three little prongs black prongs on the camera cover. The cover stayed in the OEM chassis part even without the bonding! I screwed the chassis back into the phone and put the battery door cover back on. The cover really does help hold it in place because of the additional silver on the camera cover. Now I have no more white haze with my pictures and a phone that looks normal again!!!
Posted a pic of the removal and the phone after all completed.

Yes it should work, both the US and UK versions of the phone, have the same physical parts except for the different processor and ram, but that should work perfectly for you

Neverendingxsin said:
Yes it should work, both the US and UK versions of the phone, have the same physical parts except for the different processor and ram, but that should work perfectly for you
Click to expand...
Click to collapse
Cool, I'm hoping so...going to take my chance and order one. Looks pretty easy to replace. Unscrew some screws, replace, and put screws back in. Hope it's that simple! *fingers crossed*
If anyone else can confirm or add input, would still appreciate it. Thanks!

Here's a video replacing screen on Samsung Galaxy S III (it can get
a little messy but doable)
http://androidrooted.com/file/GalaxyS3/howto/replacescreen/HowToReplaceScreenGalaxyS3.mp4
Good Luck:fingers-crossed: Let us know how it work's out.
Hope this Helps

ImgBurn said:
Here's a video replacing screen on Samsung Galaxy S III (it can get
a little messy but doable)
http://androidrooted.com/file/GalaxyS3/howto/replacescreen/HowToReplaceScreenGalaxyS3.mp4
Good Luck:fingers-crossed: Let us know how it work's out.
Hope this Helps
Click to expand...
Click to collapse
I want to replace the camera cover on the back, not the front LCD. I updated first post. Thanks for trying to provide a solution though.

I looked into complete body swaps for a Verizon GS3 and found that the Verizon model uses a different body. Your replacement part has to be for a Verizon phone and I was unable to find someone who sold those parts.
Sent from my SCH-I535 using xda premium

TommyGun$ said:
I looked into complete body swaps for a Verizon GS3 and found that the Verizon model uses a different body. Your replacement part has to be for a Verizon phone and I was unable to find someone who sold those parts.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Yeah, looks like I'm pretty much limited buying broken and swapping out the part I need or sending to Samsung for repair. :crying:
I'm curious, what did you do? Get a new phone?
On side not, watched that video and man that was crazy...don't think I could attempt that.

thetaman said:
Yeah, looks like I'm pretty much limited buying broken and swapping out the part I need or sending to Samsung for repair. :crying:
I'm curious, what did you do? Get a new phone?
On side not, watched that video and man that was crazy...don't think I could attempt that.
Click to expand...
Click to collapse
http://www.gultek.eu/mobile-phone-spare-parts/
Try looking through there for what you need.

Brian Gove said:
http://www.gultek.eu/mobile-phone-spare-parts/
Try looking through there for what you need.
Click to expand...
Click to collapse
Thanks, looked into it. Didn't see anything.

I had this issue with my S3, I bought the same thing you did. The lens is attached to the silver thing, it will pop out and you can replace that. It is held in with just some bond. A small flathead will pop it out. Not sure if you will have a problem with the cam focusing but it's worth a shot.

Smoke314 said:
I had this issue with my S3, I bought the same thing you did. The lens is attached to the silver thing, it will pop out and you can replace that. It is held in with just some bond. A small flathead will pop it out. Not sure if you will have a problem with the cam focusing but it's worth a shot.
Click to expand...
Click to collapse
Ya its pretty redic he did not know this. I mean come on did you even look. I am laughing so hard you shouldnt be taking apart your phone if you don't have common sense.
Sent from my SCH-I535 using Tapatalk 2

Smoke314 said:
I had this issue with my S3, I bought the same thing you did. The lens is attached to the silver thing, it will pop out and you can replace that. It is held in with just some bond. A small flathead will pop it out. Not sure if you will have a problem with the cam focusing but it's worth a shot.
Click to expand...
Click to collapse
So did you do this? I was able to pop out the piece from my i9300 replacement. Didn't try my phone this morning though. Wanted to wait till this evening to mess with it more. What did you use to reapply the camera cover to your existing casing since the existing bonding can't be used again?
johnnilsson said:
Ya its pretty redic he did not know this. I mean come on did you even look. I am laughing so hard you shouldnt be taking apart your phone if you don't have common sense.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Who is that comment aimed at? And how is this helpful??? I know exactly what I'm doing, it's that I can't find a part that matches up correctly with the VZW SG3. I search google and different forums for solutions. I'm not damn noob. I took a chance on the i9300 replacement because it was the only available option to me. I posted for help and then posted my experience to help others from wasting their time and money on the replacement part. I try to give back to the community, to help others. Not put them down by providing their experiences. It's comments like this that drives away all the good and helpful people from forums.
If you can't provide constructive help, don't comment at all!

thetaman said:
So did you do this? I was able to pop out the piece from my i9300 replacement. Didn't try my phone this morning though. Wanted to wait till this evening to mess with it more. What did you use to reapply the camera cover to your existing casing since the existing bonding can't be used again?
Click to expand...
Click to collapse
I did it to my first S3, the cam wouldn't focus and I though it was because the lens was missing. So I ordered the international part like you did only to find out it doesn't work for our verizon phones (like you have noticed). I then thought about popping out just what I needed, found that was easy to switch them out. Along with the bonding there are those 3...pins we'll call them. They sit in the housing pretty snug and then your battery door will cover most of the silver keeping it in place anyway. Maybe just be careful when taking the door off if you change batteries or something. If you are nervous you could try to superglue or some commercial type of bond from a store.

Smoke314 said:
I did it to my first S3, the cam wouldn't focus and I though it was because the lens was missing. So I ordered the international part like you did only to find out it doesn't work for our verizon phones (like you have noticed). I then thought about popping out just what I needed, found that was easy to switch them out. Along with the bonding there are those 3...pins we'll call them. They sit in the housing pretty snug and then your battery door will cover most of the silver keeping it in place anyway. Maybe just be careful when taking the door off if you change batteries or something. If you are nervous you could try to superglue or some commercial type of bond from a store.
Click to expand...
Click to collapse
Cool...thanks for the info. I saw the prongs and thought about superglue. Just curious...you said your first. So I'm assuming you got another SG3 for another reason?
Did the one that you made the fix on, did you actually use it for a while? Just wondering if you had any problems with it after making the change. Good point about the silver trim. The battery door does cover a good amount of that silver trim. I may try this fix. Worse case scenario...I buy a broken SG3 to get the part I need or send it to Samsung to fix.

FIXED!!!
So I took Smoke134's advice and was able to fix my camera cover for my SG3!!! :good: I rewrote the first post with my experience, hopefully others might benefit and be able to fix theirs if they encounter the same problem.

Glad you got it fixed!
I'm sure your misfortune and your end result will be of use to others that find themselves in the same position. I'm sure you won't be the only one.

Thanks for posting this! Good to know it can be resolved!

Thank you for posting your solution OP. I took a chance on the i9300 part hoping it would fit, but of course it did not. Then I found your post and went ahead with the transplant procedure. The only step I added was to heat up the lens with a hair dryer before prying it loose. This allowed me to remove the lens without removing the bonding material. The heat also made the plastic more pliable; I was able to pry the lens out easily with just my thumbnail. The new lens seems very secure.

milkfat said:
Thank you for posting your solution OP. I took a chance on the i9300 part hoping it would fit, but of course it did not. Then I found your post and went ahead with the transplant procedure. The only step I added was to heat up the lens with a hair dryer before prying it loose. This allowed me to remove the lens without removing the bonding material. The heat also made the plastic more pliable; I was able to pry the lens out easily with just my thumbnail. The new lens seems very secure.
Click to expand...
Click to collapse
Good idea, glad it worked for you! :good:

I ordered one of these today. Will let you know if it resolved my issue.
It is just the camera lens cover part without the frame.
http://www.ebay.com/itm/120989016566?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Replacement Screens

Hello,
I dropped my Nexus 4 and caused damage to the screen. There is a crack in the glass on the bottom half which causes touch not to work, but the top half is fully functional. Do I need to purchase a new screen and digitizer or just the screen?
I'm from Canada, so where is the best place to buy parts online?
Thanks

Zoider said:
Hello,
I dropped my Nexus 4 and caused damage to the screen. There is a crack in the glass on the bottom half which causes touch not to work, but the top half is fully functional. Do I need to purchase a new screen and digitizer or just the screen?
I'm from Canada, so where is the best place to buy parts online?
Thanks
Click to expand...
Click to collapse
I´d try ebay. I´m sure one of those hongkong based merchants offers spare displays.
good luck!
Edit:
I think it´s a bit expensive, but its from canada so you might find it interesting:
http://www.ebay.com/itm/LG-Google-N...e_Replacement_Parts_Tools&hash=item3f280b2311

supermult said:
I´d try ebay. I´m sure one of those hongkong based merchants offers spare displays.
good luck!
Edit:
I think it´s a bit expensive, but its from canada so you might find it interesting:
http://www.ebay.com/itm/LG-Google-N...e_Replacement_Parts_Tools&hash=item3f280b2311
Click to expand...
Click to collapse
But, do I need the digitizer or just the glass? If the top half still functions, does that means I only need glass?
Thanks.

Zoider said:
But, do I need the digitizer or just the glass? If the top half still functions, does that means I only need glass?
Thanks.
Click to expand...
Click to collapse
As I know since the touch doesn't work on bottom then you need digitizer.
Sent from my Nexus 4 using xda app-developers app

The Top Glass is the Digitizer. You will need the LCD+Digitizer set. DO NOT order just the Digitizer glass. It is for Expert Techs ONLY. The Glass and LCD are fused together and requires very careful disassembly. I highly recommend getting the 3 piece Digitizer+LCD+Frame set as that is a quick swap of the Parts that takes about 15Min total. The Glass is glued with an RTV Silicon Adhesive type on the frame (They use the RTV adhesive on the Back cover glass too) and is annoying to remove as Heat doesn't work as well as the normal adhesive most companies use. Plus there is a chance you could scratch up the frame trying to remove the glass shards (and there WILL be shards.) I have done this replacement before on both the Front and Back Glass and it wasn't fun. Just save yourself the frustration and get the 3 piece set. You'll thank me for it.

I too have a cracked screen,touch does not work but the display is working I am from India plz help me what should I do

mahesh48 said:
I too have a cracked screen,touch does not work but the display is working I am from India plz help me what should I do
Click to expand...
Click to collapse
I too dropped my phone and had to replace the whole front set...Just go to a nearby LG service center..it costs around 5500Rs they ll fix it in 15mins.

Which phone u had repaired?
Sent from my Wildfire S A510e using Tapatalk 2

mahesh48 said:
Which phone u had repaired?
Sent from my Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
Nexus 4 of course.

Again I highly reccomend getting the 3 piece with the Frame+LCD+Glass a 1 unit. You can sell the broken one on Ebay and get a few $ back that way. The swap out from that point is VERY easy and Quick. Youtube it or go to http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1
All you are doing is a swap of the MB, USB Port, Cameras, Battery and the Switches. It is really easy and quick and requires very little skill. If you DO NOT get the 3 piece set and just the Glass+LCD then it's more difficult.
AGAIN! ANYONE who needs to replace the glass just get the 3 piece set. Follow the Dissassembly Guide (only need 2 tools a PLASTIC Pry tool and a #00 Phillips Screwdriver) I posted above. I know this is just me repeating my previous post above but I just wanted to stress this as there are sales out that sell JUST the Glass and getting just the glass will be a waste of money. There is also the Glass + LCD set but again 99.999999999% of people have neither the skill and/or the tools to separate the Broken glass from the Frame let alone the LCD itself. The glass has a Silicon Adhesive which resists heat (if you've worked on cars you know how fun RTV is, imagine it on Delicate electronics) and makes it hard to remove.

Cheapest I found is 90$ us
Sent from my Nexus 4 using Tapatalk 2

Superpopsss said:
Cheapest I found is 90$ us
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
If that's for the 3 Piece set, that's a great price really. That used to be the On Sale Price for the 2 Piece set. So looks like prices are finally starting to come down.

Ohgami_Ichiro said:
If that's for the 3 Piece set, that's a great price really. That used to be the On Sale Price for the 2 Piece set. So looks like prices are finally starting to come down.
Click to expand...
Click to collapse
Here's where I buy my LCD screen and other n4 parts
http://www.spareslg.com/lcd-e-touch-lg-nexus-4-lg-e960-acq86270901.html
73€ for a LCD its the cheapest one.
Ordered many to Canada fast shipping (1week) and shipping was 5$-10$ can't remember.
Sent from my Nexus 4 using Tapatalk 2

Superpopsss said:
Here's where I buy my LCD screen and other n4 parts
http://www.spareslg.com/lcd-e-touch-lg-nexus-4-lg-e960-acq86270901.html
73€ for a LCD its the cheapest one.
Ordered many to Canada fast shipping (1week) and shipping was 5$-10$ can't remember.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
That's the 3 Piece set. Good price on that.

Ohgami_Ichiro said:
That's the 3 Piece set. Good price on that.
Click to expand...
Click to collapse
Hello!
First, sorry to open such an old thread, but I just try to follow XDA rules. And this one match most for what I'm looking for.
On my wifes Nexus 4, after she dropped it, touch screen stop to responce at about 1 cm wide stripe from bottom to top. Everything else is ok, glass is not broken. I'm asking if there is also necessary to find 3 piece set or I could manage to fix it with this: http://www.ebay.com/itm/LCD-Display...317?pt=LH_DefaultDomain_0&hash=item1e9850f8ed
Regards, Zagor

zagorteney said:
Hello!
First, sorry to open such an old thread, but I just try to follow XDA rules. And this one match most for what I'm looking for.
On my wifes Nexus 4, after she dropped it, touch screen stop to responce at about 1 cm wide stripe from bottom to top. Everything else is ok, glass is not broken. I'm asking if there is also necessary to find 3 piece set or I could manage to fix it with this: http://www.ebay.com/itm/LCD-Display...317?pt=LH_DefaultDomain_0&hash=item1e9850f8ed
Regards, Zagor
Click to expand...
Click to collapse
That part doesn't include the bezel. When you disassemble the phone, the entire front assembly includes the bezel and screen assembly. With that part, you would have to remove the screen assembly from the original bezel, then adhere the new one in. It's doabable, but a bit of a PITA, especially if you don't have a heat gun to soften the original glue. For about $60 you can get the entire front, including the bezel (brand new, without dings in the chrome) and save yourself a huge hassle.

Planterz said:
That part doesn't include the bezel. When you disassemble the phone, the entire front assembly includes the bezel and screen assembly. With that part, you would have to remove the screen assembly from the original bezel, then adhere the new one in. It's doabable, but a bit of a PITA, especially if you don't have a heat gun to soften the original glue. For about $60 you can get the entire front, including the bezel (brand new, without dings in the chrome) and save yourself a huge hassle.
Click to expand...
Click to collapse
Thank you on your answer. I've looking for 3 piece replacement, but I didn't find any cheaper then for around 90 EUR. Maybe I don't know what to search, because I don't know what the bezel is.
Regards, Zagor