Related
Sooo... I recently got rid of my Samsung Captivate. I loved the phone, I simply didn't like paying $100 a month for it. ( Darn you greedy AT&T. Haha )So when I found out about this LG Optimus V and it was $25 a month, I jumped on it. Problem is: I bricked this phone by trying to put on the Captivate's Touchwiz Calculator onto this device (because it is much better and I liked it) by following someones guide. It seemingly worked until I shutdown my phone and now it won't pass the android screen. It tries over and over but to no avail. I have found almost no blogs/threads on this phone at all or anything of actual use to me not only on xda but on androidcentral, etc. I found it very easy to put my Captivate in download mode and use odin flasher anytime I wanted to change the ROM I had on it even if it was bricked I could put a new clean install back on it. I can't seem to find anything that can help me with this phone, how to put it in download mode if possible? How to flash a new stock rom? Can't find a stock rom? I would GREATLY appreciate anyones advice or help to this very aggravating problem.
Sorry I can't help more, but what happens if you boot the phone whilst holding the back button or volume down button? That enters the hboot/fastboot menu on HTCs, where you can enter the recovery module and flash a ROM.
Well I tried both of the volume button and the back button but you saying that made me attempt pushing both of them at once with the power button. It worked!!!!!!!!!! Thank you, you helped a ton! You wouldn't perhaps know where to find the stock rom would you?
I saw this thread still open and wondered; Do you still need a stock rom?
awidawad said:
I saw this thread still open and wondered; Do you still need a stock rom?
Click to expand...
Click to collapse
id like stock rom!
i tried doing this: http://forum.xda-developers.com/showthread.php?t=1127249
and i failed, i got the first part down and i saw the red fish which is the devs logo. then the second part with the kernelKF1.tar file i guess i screwed up, because on reboot it would loop, it would go to at&t screen then it would show my screen really screwed up, with a whole bunch of colors and what not like as if it was tripping on acid haha. anyways now when i turn on my phone it shows a logo of a phone, a yellow triangle with an exclamation mark next to a computer. I do not want to lose all my apps and what not, i mean i doooo have 27 hours on my final fantasy 7 lol. so please guys what do i do to bring my phone back to life so i can try to root and flash a ROM correctly this time.
Does it say something about firmware upgrade failure, use recovery mode?
Yep. It's a soft brick so you can recovery it!
First: You must flash AT&T Gingerbread Bootloader from here: http://forum.xda-developers.com/showthread.php?t=1129821. (You must go to download mode by Vol Up + Vol Down + USB Plug or use a jig (google: Jig Captivate)
Then: Flash your kernelKF1.tar again (Download Mode) or Another kernel you like for KF1! (I prefer you flash this kernel: http://forum.xda-developers.com/showthread.php?t=1127322)
That's all!
-how do i access recovery mode? says nothing about an update failure.
-that's great news! does it matter that i was on 2.1 eclair first? back in the day i rooted my phone on the stock eclair and i beliiiiiieve did a lagfix as well, but no custom ROMS or anything like that.
-I use odin to flash both the bootloader/kernel correct? on odin i just have to wait for it to says "connected" in that little chatbox right? one of the box's all the way to the top isn't supposed to say anything until its passes right?
sorry for all the real dumb and seemingly obvious questions. But i want to make sure i know what i am doing so i can always do it correctly. thanks for all your help and quick replys guys i really appreciate it!
nismoasfuh said:
-how do i access recovery mode? says nothing about an update failure.
-that's great news! does it matter that i was on 2.1 eclair first? back in the day i rooted my phone on the stock eclair and i beliiiiiieve did a lagfix as well, but no custom ROMS or anything like that.
-I use odin to flash both the bootloader/kernel correct? on odin i just have to wait for it to says "connected" in that little chatbox right? one of the box's all the way to the top isn't supposed to say anything until its passes right?
sorry for all the real dumb and seemingly obvious questions. But i want to make sure i know what i am doing so i can always do it correctly. thanks for all your help and quick replys guys i really appreciate it!
Click to expand...
Click to collapse
1. Use combo keys: Vol Up + Vol Down + Power to access Recovery. If you are on AT&T Gingerbread Bootloader, you are good to go!.
2. You must disable lagfix before flash any rom. You can go stock and reflash it but i think you must get KF1 work to backup your game process!
3. If you flash KF1 with bootloader, you needn't to reflash it again. Just reflash kernel and you are unbrick. (If you are on AT&T Gingerbread Bootloader, on screen PC -- /!\ -- Phone, you can run ODIN and reflash kernel KF1. No need to go to Download Mode to flash kernel. If you can't flash from ODIN (try some time, change USB port, change PC, and reinstall Windows), you must reflash AT&T bootloader.
Good luck!
at&T gingerbread bootloader is a program like odin? or does it literally mean the booting of a gingerbread device? im so confuuuuused.
So i have to flash a stock 2.1 eclair? then do the kf1 file to get to 2.3.3 gb?
nismoasfuh said:
at&T gingerbread bootloader is a program like odin? or does it literally mean the booting of a gingerbread device? im so confuuuuused.
So i have to flash a stock 2.1 eclair? then do the kf1 file to get to 2.3.3 gb?
Click to expand...
Click to collapse
its questions like these that make people say 'read, read, read, read, then read some more'
the answer is literally everywhere in these forums......
i just made it so much worse, i used the gb bootloaders as well as used that ROM by using the kernel and a previous file in odin. i can still go to download/recovery, and if i just power on the phone it will loop at the at&t screen
when i get to recovery, the vol bottoms dont let me select anything. so my only option is to keep rebooting. i cant apply update from sd; even though im sure its because im doing it wrong!! someone please help i need this phone for the upcoming work week didnt think it would take 4 days to figure out.
Can Someone Please Please tell me step by step what i should do, i understand how to work the programs i just dont know the order in which to do them in. what am i to do? remember i was initially on 2.1 eclair with a voodoo lagfix, yet, i dont know what i am on know, i tried flashing ROMS as well as gb bootloaders.
so your volume buttons are broken?
just boot into download mode, flash back to stock with ODIN or Heimdall, whichever is easier for you to use, then leave your phone the fk alone, because you are compounding the problems by panicking.
its obvious that you havent truly understood what you have been flashing on your phone, and you are about to wind up with a pretty brick that will need to get sent to jtag/unbrickable mod.....
until you understand and comprehend what you are doing, leave it the hell alone, this isnt childs play here
Pirateghost said:
so your volume buttons are broken?
just boot into download mode, flash back to stock with ODIN or Heimdall, whichever is easier for you to use, then leave your phone the fk alone, because you are compounding the problems by panicking.
its obvious that you havent truly understood what you have been flashing on your phone, and you are about to wind up with a pretty brick that will need to get sent to jtag/unbrickable mod.....
until you understand and comprehend what you are doing, leave it the hell alone, this isnt childs play here
Click to expand...
Click to collapse
well said..
so have I lost all my apps? even flashing back to stock?.....and no, volume buttons are not broken.
i have the "firmware upgrade fail" and cant get into recovery...
OK! So i finally got the phone up and running late late last night. its on firmware 2.3.3 on build: cognition v2
kernel version: 2.6.35.7-I897UCKF1-CL273832
its definitely GB; thats something obvious. yet, i cant shake the feeling that it still feels slow. i ran quandrant and its a shy 1040. I know, I know, quadrant scores dont mean anything, but still.... i would think it would be in atleast the 1300+ especially with the lagfix from cognition5.
nismoasfuh said:
OK! So i finally got the phone up and running late late last night. its on firmware 2.3.3 on build: cognition v2
kernel version: 2.6.35.7-I897UCKF1-CL273832
its definitely GB; thats something obvious. yet, i cant shake the feeling that it still feels slow. i ran quandrant and its a shy 1040. I know, I know, quadrant scores dont mean anything, but still.... i would think it would be in atleast the 1300+ especially with the lagfix from cognition5.
Click to expand...
Click to collapse
If you know quadrants mean nothing then why are you looking to get a higher score?
But in all seriousness, I think were all a little surprised to see that you have a working phone and even more so one with a custom rom. You need to read up on here before you start messing with things again or your going wind up with a brick.
let me quote Mr. Haley here
its obvious that you havent truly understood what you have been flashing on your phone, and you are about to wind up with a pretty brick that will need to get sent to jtag/unbrickable mod.....
until you understand and comprehend what you are doing, leave it the hell alone, this isnt childs play here
well said..
Click to expand...
Click to collapse
Basically, nobody on here is going to offer you help until you attempt to help yourself. This isnt a support forum. None of it is. We are just kind enough to help you out. But its super annoying to see you put yourself in situations that we warned about then come back on here with OMG I THINK I BRICKED! So spend time reading and please realize we have 0 obligation to help if you brick.
capocaccia said:
If you know quadrants mean nothing then why are you looking to get a higher score?
But in all seriousness, I think were all a little surprised to see that you have a working phone and even more so one with a custom rom. You need to read up on here before you start messing with things again or your going wind up with a brick.
let me quote Mr. Haley here
Basically, nobody on here is going to offer you help until you attempt to help yourself. This isnt a support forum. None of it is. We are just kind enough to help you out. But its super annoying to see you put yourself in situations that we warned about then come back on here with OMG I THINK I BRICKED! So spend time reading and please realize we have 0 obligation to help if you brick.
Click to expand...
Click to collapse
Actually, it was me that said it.
Sent from my SAMSUNG-SGH-I777
And I just agreed with him.
thaaaanks for the life lesson; but I wouldnt be able to sit here and tell you im Running a custom ROM unless i did do my research. The time differences between my posts was me literally finding and reading countless articles. I'm asking questions not figuring out fallacys..
Don't be so defensive, they weren't talking down to you and belittling, just making sure you don't end up in a worse situation. Looking out for your best interest.
I know that....If my posts were that bad at least show me the simple corrections.I know the value of my phone, ill deal with it if it comes to that and even then nothing has happened since. Regardless, I got out of the soft brick and now I'm on DG's 2.3.3.
My father in law bought a new phone SGS on O2 and I offered to unlock it as I have unlocked my husbands last week (he's was on O2 as well but in 2.1 or 2.2.1 version I think-froyo?)
Before I continue may I say I know you guys out there know so much more than me and I really need your help. I really tried to help unlocking this phone and for hours I searched and read things like reboot, download mode, recovery mode, flashing, JKV and so many other words and letter that I could not understand. Very few I understood in the end but may have messed up badly (?).
Please, I need help and please treat me as if I were your mum or even grandma. Step by step in simple normal English please.
My father in law's version is 2.3.3
I tried unlocking it the way I unlocked my husband's but didn't work after looking for hours I thought that the best way to do it would be to downgrade from 2.3.3 (gingerbread (?)) to 2.2.1 (froyo (?)) and then unlock it.
I found this:
http://forum.xda-developers.com/showthread.php?t=1089989
and tried to follow it.
I downloaded EZRom and EZboot-Froyo-1.0.tar.md5 from the same post.
I followed:
•Download the right version from section above
•Reboot your phone into Download mode
•Connect your phone to computer
•Run EZOdin
•Select EZboot-Froyo-1.0.tar.md5 or EZboot-GingerBread-1.0.tar.md5as a PDA file in EZOdin
•Check the "Phone Bootloader Update" checkbox
•Click Start
I waited for the phone to turn off and feel the little vibration but didn't. Instead it just froze at the first screen when you turn on the phone. The black background with white letters: Samsung Galaxy...
I waited and waited and as nothing was happening I then I took the battery out. Put it back in and tried turning it on. I wouldn't it would just stop and that same screen, the black and white one.
I reread
•Wait until phone reboots and make it reboot into Recovery
SO then I remembered in the many threads I read about the recovery mode so 3 clicked vol up + button at them bottom and turn on bottom.
It gives me a few options. When I click on reboot all it does is show me the black and white screen again and nothing else. ah!!!
I took the battery off and put it back on may times, also selected the fatory reset option and tried different buttons but nothing. Please help me.
I'm happy to phone any of you guys to help me and guide me even if it's just to put the phone back to what it was before, turning on normally, etc. (I can't even turn it on!) I'm feeling really sad and a bit stressed as these days are supposed to be a nice time to spend with my little ones and family.
Anyway, please ask me anything.
Thank you so much in advance. I really hope I didn't do anything wrong and I'm just stuck because I'm ignorant in this matter. Thank you
Well, I have no skill in this area. But I wish you good luck, and this post is acting as a bump! Double goal!
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. I'll check.
From http://forum.xda-developers.com/showthread.php?t=723596 :
Darkstriker said:
(E) Recovery:
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
1.WHAAAA! I think I bricked my phone. My flash was unsuccessful/My device boots to a black screen/similar scenarios. Can I still save my device?
Most likely: YES! In almost any case, you should still be able to turn off the device (if necessary by removing the battery) and start into download-mode (VolumeDown+Home+Power) or recovery-mode (VolumeUp+Home+Power). After (for example) an unsuccessful flash, you can retry the flash in download-mode (same steps as when flashing a functioning device). If a flash to a functioning f/w (without applying any update.zip) doesn't help or you cannot get your PC to flash at all, you can ask for help here.
If you see a symbol asking you to connect to the PC, depending on how you arrived at this point, it may be sufficient to connect to the PC and run Odin (i.e. press "start" when the phone is recognized) without adding any files. This may, however, leave some residual issues if (for example) had an incorrect/incomplete flash so you may want to do a normal flash after this!
If you do not have download mode and for some ludicrous reason felt the need to go ahead and modify your firmware regardless of this lacking, there is now a guide on creating a home-made JIG which will force your device into download mode without the actual button combo here.
Click to expand...
Click to collapse
If you need any extra help, I'll try.
Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.
[/QUOTE]
After a little rethinking: (I don't have a SGS and never touched one) You can try re-stocking the phone. Not sure how you do that. [/QUOTE]
Thank u so much for your reply. O don't know what re stocking is, but i will look into it. Thank u!
I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.
anaki11 said:
I don't know how to re stock it.
Sorry to seem so dumb.
Can anyone help me step by step? If at all possible could I phone someone to help me with this? Send me phone number via private message
Thank you sooo much.
Click to expand...
Click to collapse
Well, no problem, I guess. I don't think it needs to come to voice support, to be honest. I think text is enough for the issue in matter. I'll look a bit into this, I'll have to go soon from my computer. I'm sorry if I can't be of any greater help.
moses992 said:
Im somewhat of a rookie user too but I do know this, If you can still go into recovery/download mode (using the 3 button combo) then you havent bricked the phone and you can fix it! so dont stress too much .
EDIT: Im guessing you can download a stock ROM and flash it via odin.
Click to expand...
Click to collapse
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.
anaki11 said:
Your post helped me not to stress too much.
I'd like to download a stock rom and flash it but I don't know how to.
Here's where I am. I found a list of firmware. This is the last one on Samfirmware.com.
Europe Samsung I9000 Firmwares.
I9000XXJVS ##
512.PIT
2.3.5
2011 September 8
CSC = I9000OXAJVS
DOWNLOAD
Things I need: (I think)
-Download a firmware (should I use the lastest one?) or 2.2 or 2.3.3? . Is there one better than the other? or is it my choice? How can I choose the best one for me?
-Odin. I have OdinMultiDownloader v4.03 in my desktop. Is that the best thing to use or should I use Ezodin. I don't know what the difference is.
-(Do I need to download or do anything else?)
Things I should do:
-Put phone in download mode
-Plug it to the laptop
-Open Odin (or Exodin?)
-click PDA. Choose the fie I downloaded-firmware.
(-after this I don't know what else I should do or tick or untick)
Am I in the right track or completely off it?
Thank you again to anyone taking the time to read this.
Click to expand...
Click to collapse
In my thoughts, I believe that should be what you need. You can try, if that doesn't solve the issue, it's because you need something else as well.
And the think you should make the file a PDA file, I believe. Don't take my answer too direct. I'm almost unknown with Samsung devices on that matter, but I can say a couple of things, like, that, I'm pretty sure it is on PDA files.
And no problem, always pleasing to help someone in trouble. I was/am a rookie too Ignore the Senior Member thingie. Still a noob in pretty much everything. And don't panic, no need for that.
Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.
anaki11 said:
Thank you. I should try that tonight unless someone stops me before to tell me I'm about to make another mistake.
Click to expand...
Click to collapse
Haha. I doubt it. 99,99% of actions are reversible, really. And I have severe doubts that this is one of the remaining 0,01%.
Well, I wish you good luck. If you ever need any more help, you can post here. I'll look into here time to time.
BTW. Just wait a second. You know that link you give on the first post? There's also a Gingerbread file. You can *try* flashing that one, to see if it reverses the problem. Sounds legit to me.
Youtube.com/qbking77
He has tons of tutorials
Sent from my SPH-D700 using Tapatalk
I was trying to flash a kernel that i found in a forum, i tried with Voodoo, my phone was already rooted. Then i heard a female robot voice saying something about "partition" and a process that was gonna take like ten min. From then, the google logo pops up and nothing will happen. i cant put it in download or recovery mode. now the robot voice isnt even saying anything basically just stuck on a google logo screen. I have no idea what to do. can someone please help me.
What kind of phone do you have? (Assuming Mesmerize or Showcase?) What version of Android are you on? If you come to (http://webchat.freenode.net/)(#samsung-mesmerize), it be easier to help you out. You'll need to Odin back to Stock before going forward to Voodoo lagfix.
I once biffed my phone up flashing an incapatible kernel and took it back to the store. They were happy to re-flash it for me. I also was not able.to get in recovery.
I simply told them I was trying to perform the 2.3.5 update which was listed on the site and something went wrong.
Just FYI, The voice was the kerenl enabling voodoo lag fix (a very good thing)!
Sent from my SCH-I500 using XDA App
Glitch kernal
I always used the glitch kernal on my mez. worked great for me. Comes loaded in the latest miui build.
doublej3030 said:
What kind of phone do you have? (Assuming Mesmerize or Showcase?) What version of Android are you on? If you come to (__________________________), it be easier to help you out. You'll need to Odin back to Stock before going forward to Voodoo lagfix.
Click to expand...
Click to collapse
Im having a problem with my Mesmerize, and I think this could help me out, but the link wont send me anywhere, can you help me out?
I think i can help u out.
K so if ur having any problems wit ur mesmerize, i'd recommend flashing back to stock rom.
Now to do this, your going to have to go to rootwiki and find the mesmerize forum.
Go to the first thread on the page, and there you can find a link to download Odin 3.1, Eh09 and Eh20 radios, and CWM 4.
To find the stock roms, theres another thread on rootzwiki that has the official USCC stock froyo and gingerbread roms.
With those downloaded, ur just gonna want to flash them on ur phone through odin. Plug phone into computer while holding the down volume the get the phone into downloading mode. Import the two files and there you have it.
Hope this solves ur problem
Blah
This phone is annoying me. Lol.
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Dr. Light said:
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Click to expand...
Click to collapse
first of all you can't flash anything on a stock recovery hence the need of a custom recovery. Second you don't accept the OTA when rooted as it can cause the exact issue that you have. Last there isn't a way to fix your problem via another android device that I know of.
U are going to need a pc and then u will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery. Then you can access your backups.
Always_Jonezen said:
U will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery.
Click to expand...
Click to collapse
He doesn't have access to his PC PLUS he already knows what to do on that end.
jmxc23 said:
He doesn't have access to his PC PLUS he already knows what to do on that end.
Click to expand...
Click to collapse
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Thanks for all of advice guys. I'll prob just wait it out till Monday. Thanks again.
Always_Jonezen said:
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Click to expand...
Click to collapse
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
jmxc23 said:
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
Click to expand...
Click to collapse
hey all, I've been reading , downloading etc for hours trying to get back into my GS3.. i was as usual roaming around and saw a post that said something to this effect "do ya need to get back to stock?" and figured yes i need to so i jumped in with both feet ..i had my boot loader unlocked and for some reason locked the darned thing remembering it was locked before i rooted and then i get the screen that says ie: "System software not authorized ~~~~~~~~~~~~" with a yellow triangle over it with an "!" mark in it..
all would have been ok except the line up of the way to do things was kinda outta line.. after i had locked bootloader "which is the way the GS3 came" i thought. at any rate i am now where i said i was and if i can be helped it would be appreciated.. and no repeated.. next time i'll read their whole line up first.. so help me if ya can and i am game right now for about anything ..