How can I install on my Polaris WM 6.5 after install Android 2.1(it works)
on the same??
activesync does not work because the device has become Android Phone.
Hard Spl can still work?
you have to enter hard spl manually by resetting your phone while pressing camera button.
then you will be able to flash your phone normally
Related
when i flashing my dopod , my house suddenly blackout.
So what happened to my dopod is that i stuck at IPL, SPL , GMS , OS page, and it didnt load windows anymore.
I tried to hard reset it , but it helpless
I can go in bootloader.
Is their any possible way to install a fresh rom into it?
Searched around , but found nothing. Pls help up
try this
1) hold your communication button and soft reset *keep holding comm-button until see the RGB color bar,
2) plug-in your USB cable, u will see a 'USB' appear at your bottom left,
3) install the flash ROM from your window.
well I tried install WM6 once fail, so I do the above step, and 2nd time successfully upgrade to WM6, you can use back your original ROM download form dopod site.
goodluck
feiyee said:
when i flashing my dopod , my house suddenly blackout.
So what happened to my dopod is that i stuck at IPL, SPL , GMS , OS page, and it didnt load windows anymore.
I tried to hard reset it , but it helpless
I can go in bootloader.
Is their any possible way to install a fresh rom into it?
Searched around , but found nothing. Pls help up
Click to expand...
Click to collapse
It's easy, mail your dopd to me.
Hi all,
I upgraded my xda neo's OS from WM5 to WM6 and it was working good.
In the start menu of the xda, there is (Shutdown and Reset buttons). I tried to click over the Reset button. Afterwards the xda get frozen during restarting and stand on the (Windows mobile screen). I tried to connect it to the PC to reinstall the WM6 or even return back to WM5 but no way, the Activesync tell me "your device was not detected".
Can somebody help me to get my xda work again?!
Thanks
leopard555 said:
Hi all,
I upgraded my xda neo's OS from WM5 to WM6 and it was working good.
In the start menu of the xda, there is (Shutdown and Reset buttons). I tried to click over the Reset button. Afterwards the xda get frozen during restarting and stand on the (Windows mobile screen). I tried to connect it to the PC to reinstall the WM6 or even return back to WM5 but no way, the Activesync tell me "your device was not detected".
Can somebody help me to get my xda work again?!
Thanks
Click to expand...
Click to collapse
1. read sticky threads in the Prophet Mobile 6 forum, or,
2. flash NVID, then flash wm6 or wm6.1 roms ( you may need to hardspl first )
Hi,
I tried to install hebrew ( Eyron ) and after restart the w.m 6.5 got stuck .
I see only the windows picture ( orange ) .
it seems that the windows works "behind"
I tried hard reset with all combinations of buttons.
Also Activesync does not connect to the device
How can I unInstall it ?
Hi,
I replaced the SPL on a Chinese dopod S900 (same as HTC Diamond) using SPL-1.40.OliNex. Ever since, the installed Windows Mobile 6.1 stops with a Chinese error message which I cannot decipher.
I've tried replacing the SPL with the stock one, but this doesn't seem to work. RUU / Active Sync works when I reset the device and push the volume down to display the SPL screen - the progress indicator goes up to 100% and device resets, but SPL doesn't actually change.
Is there any way I can reload the stock SPL to get Windows to boot properly again or any way to load a different OS version (or even Android)?
Thanks for your help.
Regards
Johannes
I managed to flash a German ROM using Active Sync after booting into the SPL (reset with volume down pressed).
I still have the same "problem" in Windows now. It displays a message and doesn't seem to do anything, but I can read the message. It says something about the phone being initialized. So everything is working fine!
I guess if you have a Chinese phone it helps if you know some Chinese...
Hi I have HTC Touch Diamond P3700 DIAM100, and it can´t start system booting stopped at tricolor mode. I try reinstall bootloader, but it doesn´t help. Verzion of bootloader is ok. Whot can i do wit it? Original operating system is WM.6.1, but i wished upgrade to WM.6.5 if enybody now how to make it, please write
Task29 --> magldr -->CWM partion -->Rom installation
this can be performed if tricolor shows below USB, if not then u can't perform TASK29
use search
Thanks, the USB displays on the underside it is fine, but isnt Task29 similar like RUU (Rom update utility)?, can i save my old operating system, or i really need CWM partition to format rom ?, and how is it with HSPL? should i need it because i try many verzions of HSPL, but it didnt install on my Diamond. Iam a bit desperate .