Related
Welp I am one of the stupid ones and installed MIUI on my Infuse, and like everyone else, I'm stuck on the boot screen. I looked at the post on the same topic and tried to do it but couldn't get it to work probably becuase the computer says that its an Unknown device instead of a Samsung device.
So my question is what do I do now that my computer doesn't recongize the phone as a device anymore?
Thanks to all that can give help.
http://forum.xda-developers.com/showthread.php?t=1116251
And lesson learned - never install a ROM from another phone.
Yeah I know that now. Foolish mistake I know I shouldn't have made.
But, I have tried using that but when I connect the phone to the computer it shows to be an unknown device and Odin doesn't pick it up at all. My problem is, is that the computer doesn't recognize it as an Android Device anymore. Is downloading the drivers from Samsung going to help?
I'll have to leave that to someone else - I use Heimdall on a Linux box, I've never flashed from Windows.
Oh, ok. Well thanks for your help .
I fixed my problem. What I had to do was get another computer that doesn't have the Samsung Drivers or Kies installed and then install them. Once that was done Odin found the device and I was able to restore it.
So there's a tip for anyone who can't get their device to be recognized by the computer or Odin itself.
Or just uninstall/delete those drivers?
Entropy512 said:
I'll have to leave that to someone else - I use Heimdall on a Linux box, I've never flashed from Windows.
Click to expand...
Click to collapse
i have started to do this to since i got the infuse. ill tell you i dont miss driver issues one bit! linux/bsd/mac/whatever rock as long as you have supported hardware and that is becoming less and less of a problem these days.
re: Now Stuck
You need to try and pull the battery out and put it back see if you can get the phone into "download mode". If you cannot get it into download mode by doing that or using the up/down volume and power key combo then I would suggest that you purchase a "jig" on ebay. (they cost under $10 bucks shipped).
Here is the ebay link for the jig:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
With a jig all you would need to do is to remove battery, plug the little jig into the usb port of phone and replace the battery, then wait 5 seconds or so and the phone will be in download mode allowing you to use Odin3 and flash back to "stock rom" to start with..
Best if you did that using the "Ultimate Unbrick" stock froyo rom after that
you can install infuse 1.5 custom rom or Bionix or the defused custom rom or any other rom.
Here is the link for the Ultimate Unbrick:
http://forum.xda-developers.com/showthread.php?t=1116251
Good luck.
nstong said:
Or just uninstall/delete those drivers?
Click to expand...
Click to collapse
I tried that but it didn't work on my computer, but that's just my computer that could work for someone else. If that doesn't work though, you can get another computer and install the drivers on them and that should work.
SamsTechAnswers said:
I tried that but it didn't work on my computer, but that's just my computer that could work for someone else. If that doesn't work though, you can get another computer and install the drivers on them and that should work.
Click to expand...
Click to collapse
Where are you trying to uninstall the drivers from? I have windows 7 and went to device manager or whatever and took it off there. Then reinstalled kies, worked perfect after.
Sent from my SAMSUNG-SGH-I997 using XDA App
Entropy512 said:
http://forum.xda-developers.com/showthread.php?t=1116251
And lesson learned - never install a ROM from another phone.
Click to expand...
Click to collapse
and.... do not touch if it works properly
I guess this is a good sign. Our phone is gaining popularity because new people are buying it and trying dumb things with it
It says I dont have proper drivers? I got samsung kies on my computer do I need it on my phone as well? It wont down load onto the phone (maybe because only eu phones have it available?) I need a superoneclick link maybe that has proper drivers! Can some one help me out, I've tried alot of things even broke out the old laptop(I run mac now) it's running xp, if that helps. Could some one help me root this bi**h!!
I really need input it seems i'm not getting any answers on the posts that help others figure it out. I have tried ALOT any help would be great!! anything!!!
no you don't need it on the phone just install kies and connect the phone and make sure debugging mode is enabled
DynamicRam said:
no you don't need it on the phone just install kies and connect the phone and make sure debugging mode is enabled
Click to expand...
Click to collapse
Exactly what he said...
That's because Kies loads the correct drivers for the Infuse.
Sent from my Samsung Infuse 4G - 1.6ghz
So do i click the update firmware? it just stays paused on loading for like 20+ minutes!! Also I tried to root it with superoneclick after i installed kies and it still said i have the wrong driver!! and freezes up or just says checking drivers then failed it the freezes on waiting on device...
I feel like a fool ive tried way to many times, I just plug the phone in i debug and unmount the sd card. am i supposed to select the usb mass storage or something!!
Irierider said:
So do i click the update firmware? it just stays paused on loading for like 20+ minutes!! Also I tried to root it with superoneclick after i installed kies and it still said i have the wrong driver!! and freezes up or just says checking drivers then failed it the freezes on waiting on device...
I feel like a fool ive tried way to many times, I just plug the phone in i debug and unmount the sd card. am i supposed to select the usb mass storage or something!!
Click to expand...
Click to collapse
No need for that..... Just install LATEST version of Samsung Kies and your pc will have the drivers. There are a lot of versions floating around out there and only the newest one has the Infuse drivers.
Once loaded just use super one click again and it should work.
If it's not working, try latest super one click and try again...
And yes, be in debug mode and have it on mass storage device.
Sent from my Samsung Infuse 4G - 1.6ghz
Does anyone have a good link to a download, all the ones I find for the newer ones are mirrors to some bs paysites. Also I can't even hook up to kies due to the fact it needs to be in "PC studio" mode I can't find that on my phone also before I would plug in my phone it would say "update firmware(samsung kies)" now its not there and it never updated, is that the problem at all.
Irierider said:
Does anyone have a good link to a download, all the ones I find for the newer ones are mirrors to some bs paysites. Also I can't even hook up to kies due to the fact it needs to be in "PC studio" mode I can't find that on my phone also before I would plug in my phone it would say "update firmware(samsung kies)" now its not there and it never updated, is that the problem at all.
Click to expand...
Click to collapse
Elgoog
Sent from my SGH-I997 using XDA App
Okay I think my phone rooted it self!! I went to bed tried again said already rooted!! NICE now to get hulu to work (sadly thats 90% why I rooted my phone) I watch my wife on hulu on her little phone and it killlls me so thats nest, but seems still not ot work. Thanks alot of answering my super easy (borderline retarded questions) I will now rerereread the hulu post and crack away at it from step one!! LAST QUESTION and I will search more to refind it, but what is the program/app that allows you to get a question "allow" box everytime some program/app tries to use su. I heard it helps noob people not brik their phone as easy. I am not doind ANYTHING with root exept getting hulu for now, I want to make sure I dont skrewball it up!! Thanks again JD
Infuse XP Drivers
I have an issue here, my laptop crashed and I lost everything on the drive. I'm trying to find the XP drivers for Infuse. Can someone please point me to a working link for these drivers?
I'm running SuperCM7 on my Infuse and am needing to get BT working so I need to reload it to something different.
~jesse
I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.
May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.
As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.
Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium
terr_bear said:
I tried running Odin to unbrick back into recovery, but apparently didn't have the drivers installed (to my surprise). I hate to say it but I think I've reached the point of no return...any help would be very much appreciated.
Edit: I can't even get into dl mode and I don't have the samsung logo on the screen anymore...just a phone and computer logo.
Click to expand...
Click to collapse
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.
atrix4nag said:
May be you are not in dowload mode correctly.
For download mode:
1. remove battery
2. connect phone to computer
3. put battery
4. press volume up and down buttons only (no power button)
Try these steps, hope its helpful.
Click to expand...
Click to collapse
According to your directions, I did it correctly...I was at a point where I could get into download mode, but I can't anymore...?
Zaidin said:
As far as the driver issue is concerned, downloading "Kies" is the easiest way. The phone doesn't actually work with the software, but the process of installing it will take care of any driver issues.
Search Kies in google to grab the download.
Click to expand...
Click to collapse
Downloaded kies to my computer...when I synced up it couldn't identify the device. I did a good amount of research before posting here...nothing seems to work
abcvn said:
Try one click unbrick ^^ it work on mine
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I'll give that a shot and let you know how it goes...thanks man
Truckerglenn said:
That is a download mode. It's just your Infuse saying man, something ain't right and I ain't going no farther.
Just install the samsung drivers, plug the phone in, let the drivers install and then run Odin.
Click to expand...
Click to collapse
That's the thing...odin would be a breeze, but I just can't get the right drivers for odin to id it...so I guess my solution would be to get kies to id my phone so I could dl the drivers and run odin, right? Easier said than done I suppose...
Thanks for the feedback guys, I really do appreciate it...
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
Thanks, I'll give that a try too...
nygfan760 said:
Don't plug in your phone at all. Open up Kies/Kies Mini or whatever you have, and under the options it should have an option to install drivers. Once they are done, close kies, reboot your computer, open up Odin with whatever you are flashing, and then plug your phone into download mode.
Click to expand...
Click to collapse
So I shouldn't sync my phone to get drivers via kies?
terr_bear said:
So I shouldn't sync my phone to get drivers via kies?
Click to expand...
Click to collapse
No, the program itself can install them without the phone, at least kies mini will. Or you can just download the driver from here:
32 bit drivers: http://www.mediafire.com/?0b45zo7o75rc5d5
64 bit drivers: http://www.mediafire.com/?3dh4d6up72me9re
It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/
get rid of kies. it's a useless program. also if it's open odin might not work, even if it's open in the background like in the system tray.
the drivers are in the most logical place you could think of. on the samsung website under device support.
http://org.downloadcenter.samsung.c...445/SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip
http://www.samsung.com/us/support/downloads/at-t/SGH-I997ZKAATT
use the samsung cable if possible, others should work but on the older moment/intercept style phones a specific cable seems to be required. it couldn't hurt to make sure you have the correct cable.
even if you have the phone + computer screen it doesnt automatically mean you are in download mode. you may still need to do the download mode proceedure from battery pull (to make 100% sure the phone is off before you start the proceedure)
the best way is to
1 open odin
2 pull battery
3 connect the cable
4 phone should be face down
5 hold the volume buttons at the same time
6 with volume buttons depressed slide the battery into place
now you may see dwnload or you may see phone + computer or you may even see a black screen but there is a good chance that if the drivers worked that you will see a yellow box in odin
good luck
terr_bear said:
It said I successfully dl'ed the drivers, yet nothing has changed...used kies mini, restarted my comp, and tried to sync, but it still can't recognize the phone...hate to admit it, but I think I've exhausted just about every solution I could find or think of :/
Click to expand...
Click to collapse
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4
Truckerglenn said:
Read what was said. Install drivers, close kies, reboot, open Odin.
Cranky...
KK4
Click to expand...
Click to collapse
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.
Ryanscool said:
I have tried everything, and windows 7 says the drivers are in place, but nothing happens! Trying heimdale, nothing is happeneing either.
Click to expand...
Click to collapse
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.
nygfan760 said:
Heimdall uses completely different drivers which are installed via the one click heimdall using zadig.exe
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
If you can get to download mode, you are not bricked, and it is an issue on your part.
Click to expand...
Click to collapse
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.
Ryanscool said:
I can not get anywhere, but i am installing the 64 bit drivers as im running win 7 64. I will try again, but for anyone else who has no other options and a tiny bit of cash there is some hope http://mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-jtag-brick-repair/ . Suprisingly, this is not a scam as many, many people say it worked for them.
Click to expand...
Click to collapse
Get UnBrickable mod. That works well. I use it whenever I put my device into download mode. Just send me a pm and ill do it for $30+shipping. UBM lets you upload download mode to a device regardless of its state. I spent alot of time researching the methods and I came up with the mod for this device not too long ago.
UBM is the best option. Here is a demo on a captivate. We rewrote the HIBL for compatibility with the infuse4g
Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.
terr_bear said:
Thanks for all the help guys, but absolutely nothing I tried was working and I was short on time and patience...so you gave in to the JTAG unbrick service. I couldn't stand to pay for a service that I was sure I could perform myself, but when it got down to it, I didn't have time to deal with I all. I can confirm that it is a legit service. Great communication and Josh does quick work of getting things working again...I'm a firm supporter of DIY, but if you do reach the point of no return like I did, it's a very reliable resource.
Click to expand...
Click to collapse
I have a suggestion. I also had this issue. The problem was my main PC. I simply used my old laptop and it worked like a dream. I know thus seems too simple but it has worked for several people.
Use GTGs Ultimate Unbrick on a different computer.
Just my 2ยข
Hey, I managed to brick my Infuse 4G trying to get Entropy's CM9 on it. I flashed it once and it was stuck on the samsung screen like it was suppose to but when I tried to go to CWM, I would get various colors, mostly blue and orange on the top and a big grey spot in the middle. I am trying to get it back to stock but I am having issues getting my computer to recognize that I plugged my phone in, neither Hermidall nor Odin recognize when my phone is plugged in in Download mode. I have downloaded Kies. Any suggestions?
If you had read any of the numerous other posts on this you would find that Kies creates issues so get rid of it and the colors are caused by the Froyo bootloaders on your phone, something that is fixed when you get GB bootloaders.
Watch this video for a how to on installing Heimdall
http://www.youtube.com/watch?v=sHyY7WHx4zc
Use this as a guide to actually installing Heimdall
http://forum.xda-developers.com/showthread.php?t=1524081 , many thanks to qkster.
If you do everthing correctly and completely, it will get you to stock GB.
From there you can go to ICS and then if you want, to JB. Do not skip ICS and try going to JB. Hope this helps.
Pony Express said:
If you had read any of the numerous other posts on this you would find that Kies creates issues so get rid of it and the colors are caused by the Froyo bootloaders on your phone, something that is fixed when you get GB bootloaders.
Watch this video for a how to on installing Heimdall
http://www.youtube.com/watch?v=sHyY7WHx4zc
Use this as a guide to actually installing Heimdall
http://forum.xda-developers.com/showthread.php?t=1524081 , many thanks to qkster.
If you do everthing correctly and completely, it will get you to stock GB.
From there you can go to ICS and then if you want, to JB. Do not skip ICS and try going to JB. Hope this helps.
Click to expand...
Click to collapse
Thanks for replying. The issue is that my computer and my friend's computer do no realize when I plug it into the computer in Download mode, on the of chance I sucessfully get it into that mode. I have tried with and without the Kies software.
Lefaid said:
Thanks for replying. The issue is that my computer and my friend's computer do no realize when I plug it into the computer in Download mode, on the of chance I sucessfully get it into that mode. I have tried with and without the Kies software.
Click to expand...
Click to collapse
No prob... it can be a process the first time... after that it is a breeze.
Make sure you have the Infuse drivers on your computer (I am assuning you are running windows) here, courtesy of bigjoe2675 are the drivers.
http://d-h.st/sKF
Pony Express said:
No prob... it can be a process the first time... after that it is a breeze.
Make sure you have the Infuse drivers on your computer (I am assuning you are running windows) here, courtesy of bigjoe2675 are the drivers.
http://d-h.st/sKF
Click to expand...
Click to collapse
I tried installing the setup file in the driver and the computer still does not recognize my phone.
I have been without Windows OS for a couple of months and will be w/o for another 3 weeks, sorry.
You must uninstall kies and do not have your phone plugged in to the computer during the driver install. If I remember correctly, once you download the zip with the drivers to the computer, you have to extract them and then run the setup. Once that is done, reboot the computer and plug your phone into a usb port on your puter that you know to be working.
Should you go forward and use Heimdall, use the same port each time.
Again, I am assuming you are using Windows. With Linux there is no need to install drivers, it recognizes the phone. With mac- no idea.
Maybe try this: http://forum.xda-developers.com/showthread.php?t=1683036
Can also use the search above -- 'computer won't recognize phone'
Pony Express said:
I have been without Windows OS for a couple of months and will be w/o for another 3 weeks, sorry.
You must uninstall kies and do not have your phone plugged in to the computer during the driver install. If I remember correctly, once you download the zip with the drivers to the computer, you have to extract them and then run the setup. Once that is done, reboot the computer and plug your phone into a usb port on your puter that you know to be working.
Should you go forward and use Heimdall, use the same port each time.
Again, I am assuming you are using Windows. With Linux there is no need to install drivers, it recognizes the phone. With mac- no idea.
Maybe try this: http://forum.xda-developers.com/showthread.php?t=1683036
Can also use the search above -- 'computer won't recognize phone'
Click to expand...
Click to collapse
I do have a Linux setup ready. Is there a way I can do it with Linux? Thanks again for being so helpful.
Edit: I have been toying with it on Ubuntu and am having the same issue of the computer not recognizing it as far as I can tell. I did get Heimdall working on it.
Lefaid said:
I do have a Linux setup ready. Is there a way I can do it with Linux? Thanks again for being so helpful.
Edit: I have been toying with it on Ubuntu and am having the same issue of the computer not recognizing it as far as I can tell. I did get Heimdall working on it.
Click to expand...
Click to collapse
The only thing you should have to do for Ubuntu to recognize the phone is enable usb debugging in settings on the phone and after that, enable it, most likely from your drop down menu on the phone.
Heimdall will be a .jar file - let me know if you need help getting it to open.
Pony Express said:
The only thing you should have to do for Ubuntu to recognize the phone is enable usb debugging in settings on the phone and after that, enable it, most likely from your drop down menu on the phone.
Heimdall will be a .jar file - let me know if you need help getting it to open.
Click to expand...
Click to collapse
Shame the phone is bricked right now ;/ . Back to my Windows computer. Thanks for trying to help but I think something is busted in my phone that isn't allowing it to tell the computer what it is or something. I don't know. I am going to try my friends computer to see if it is something weird with my own Thanks again for trying to help. If I find a solution, I will post it.
Hello pisses me off Odin
the drivers are installed
Kies is not installed
I try all the usb port
I try these other usb cable
I tried every version odin
Thank you to solve my problem:laugh:
Kris1107 said:
Hello pisses me off Odin
the drivers are installed
Kies is not installed
I try all the usb port
I try these other usb cable
I tried every version odin
Thank you to solve my problem:laugh:
Click to expand...
Click to collapse
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number
drago10029 said:
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number
Click to expand...
Click to collapse
Hi, I'm kinda having the same problem the original poster is having.
My problem is, my windows 7 computers do not see the phone at all, no matter which cable/USB port I use. No beep, no trying to install drivers, no nothing. I'm assuming that unless windows sees the device to begin with... I won't be able to use kies or Odin or heimdall or adb or anything right?
android n said:
Hi, I'm kinda having the same problem the original poster is having.
My problem is, my windows 7 computers do not see the phone at all, no matter which cable/USB port I use. No beep, no trying to install drivers, no nothing. I'm assuming that unless windows sees the device to begin with... I won't be able to use kies or Odin or heimdall or adb or anything right?
Click to expand...
Click to collapse
ok, have you checked device manager to see if the phone shows up there? and you're right if it isn't being detected than you can't use it basically lol. I know sucks.
honestly, download the drivers manually and install them. If you're not sure how to check device manager or find the drivers google is you're friend :good: hope you get it working!
drago10029 said:
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number
Click to expand...
Click to collapse
drago10029 said:
ok, have you checked device manager to see if the phone shows up there? and you're right if it isn't being detected than you can't use it basically lol. I know sucks.
honestly, download the drivers manually and install them. If you're not sure how to check device manager or find the drivers google is you're friend :good: hope you get it working!
Click to expand...
Click to collapse
Drago, thanks for trying to help me, can't tell you how much I appreciate it bro. Now when it comes to windows, I'm no noob, I actually own a small business going out to people's houses and fixing their computer/WiFi/printer problems. So device manager, yeah I tried "scanning for new hardware" tried and tried, checked and checked, restarted, tried safe mode, tried using different administrator account, nothing. That's when I got this gut sinking feeling, what if something is wrong with the USB port on the phone.
It's a SM-S820L, galaxy core prime. No sound when I plug it in, nothing shows up in 'my computer', no tuh noon sound, and I remember back when the phone was working like normal, I tried to get a picture or two off of it by plugging it in while it was on, I remember it showed up in windows no problem, even without the drivers from Samsung installed. Now nothing happens, even though it says download mode.
I still need your help Drago, don't forget about me
android n said:
Drago, thanks for trying to help me, can't tell you how much I appreciate it bro. Now when it comes to windows, I'm no noob, I actually own a small business going out to people's houses and fixing their computer/WiFi/printer problems. So device manager, yeah I tried "scanning for new hardware" tried and tried, checked and checked, restarted, tried safe mode, tried using different administrator account, nothing. That's when I got this gut sinking feeling, what if something is wrong with the USB port on the phone.
It's a SM-S820L, galaxy core prime. No sound when I plug it in, nothing shows up in 'my computer', no tuh noon sound, and I remember back when the phone was working like normal, I tried to get a picture or two off of it by plugging it in while it was on, I remember it showed up in windows no problem, even without the drivers from Samsung installed. Now nothing happens, even though it says download mode.
I still need your help Drago, don't forget about me
Click to expand...
Click to collapse
alright well you have one of 3 issues then honestly.
1. phone USB port like you said
2. the PC/laptop USB or..
3.cable or driver issues.
make sure your completly uninstall the phones drivers in device manager while the phone is plugged into the PC. next unplug the phone, restart, reinstall actuall samsung drivers, than try pluggin in again. use a known working USB port also.
sorry I can't give you an answer that's the best I can think of, let me know how it goes!
drago10029 said:
alright well you have one of 3 issues then honestly.
1. phone USB port like you said
2. the PC/laptop USB or..
3.cable or driver issues.
make sure your completly uninstall the phones drivers in device manager while the phone is plugged into the PC. next unplug the phone, restart, reinstall actuall samsung drivers, than try pluggin in again. use a known working USB port also.
sorry I can't give you an answer that's the best I can think of, let me know how it goes!
Click to expand...
Click to collapse
Hey drago, here is an update, I have tried everything and nothing has worked, here is the newest thread that details where I'm at http://forum.xda-developers.com/android/help/options-to-help-t3321873
android n said:
Hey drago, here is an update, I have tried everything and nothing has worked, here is the newest thread that details where I'm at http://forum.xda-developers.com/android/help/options-to-help-t3321873
Click to expand...
Click to collapse
You can try redownloading Odin and also running Odin as an administrator, that's been the case one in a while. lastly uninstall and reinstalling drivers could help. If this does'nt do it sorry, I'm all out of ideas.
I have same problem with Odin v4.42 and work with Odin3_v3.04,try different version of Odin.