Unable to reboot after returning to stock - G Tablet General

After totally bricking my G Tablet and getting Magic Value Mismatch I followed this guide
http://forum.tegratab.com/viewtopic.php?f=6&t=8
managed to recover to stock
Now when I power off and try to power back on I get nothing I have to reflash to boot it up while connected to the laptop I can here when it goes into apx mode and when I try to force to recovery but nothing on the screen, I get notified of an update and if I try to apply it never fully reboots.
Thanks in advance

How are you reflashing after the power down? Is it getting to APX mode? Maybe the bootloader is still messed up?

I am going into apx mode by using power vol- then selecting the nv flash batch file
Sent from my PC36100 using XDA App

Installed ubuntu and it worked seems it was some issue with windows

Related

Stuck On Bootloop Can Anyone help?

Ok So I tried Flashing the recovery through rom manager and when it downloaded it asked for su permission I Pressed allow clockwork gave me an error stating i did not have enough rights to flash recovery rom manager force closed and the phone turned off and now when I try restarting I get a boot loop at the LG screen. When I press Vol- + power it says S/W Upgrade Please wait while upgrading but does not do anything after that its been on the screen for more than 20 minutes any ideas how i could fix this?
Are you rooted?
Have u tried a battery pull? After that try to boot up to bootloader by holding power+vol down(u shouldnt get the update thing after battery pull). Make sure it says s-off. It seems like ur not rooted correctly since u got the permissions error
Yea I Rooted Using One Click method I was able to use root for other programs like titanium back up tried a battery pull already and tried holding vol down + power but it takes me to the upgrading screen
I'd give the nvflash method a shot. When I flashed cwm, I specified the wrong file and couldn't boot. Once I figured that out and got it right it booted up fine.
edwards33 said:
Ok So I tried Flashing the recovery through rom manager and when it downloaded it asked for su permission I Pressed allow clockwork gave me an error stating i did not have enough rights to flash recovery rom manager force closed and the phone turned off and now when I try restarting I get a boot loop at the LG screen. When I press Vol- + power it says S/W Upgrade Please wait while upgrading but does not do anything after that its been on the screen for more than 20 minutes any ideas how i could fix this?
Click to expand...
Click to collapse
You'll need to have the recovery flashed using the NVFlash method as previously stated. The Rom Manager method seems pretty worthless to me so far. Also, have your USB cable unpugged when trying to boot to recovery.
Great news I pulled the battery while it still said upgrading I turned on by holding volume down and power and I held until and android Icon came up and it rebooted itself and loaded as if I had done a master reset thanx for the tips
Sent from my LG-P999 using XDA Premium App
Awesome, glad to hear it.

[Q] think i bricked my t.f.

so i wanted to do a full factory reset did that from the setting's menu on the tablet now i am just getting a boot loop at least that is what is looks like and i can't go into recovery to doing a nand restore so at this point i am a little confused on what do do i rooted on 3.1 and i used the nvflash tool to root and don't remember what rom i am on i am thinking prime 1.5 my boot img looks like a lhoneycomb bee with a bios looking menu i am hoping someone can help me to move into the right direction thanks guys in advance!!
Tried to turn the device off, and boot into recovery?
if that does not work you should try to go into APX mode and use nvflash to flash a stock or cooked rom.
http://forum.xda-developers.com/showthread.php?t=1133014&highlight=nvflash
It appears you already got nvflash+Prime. Worst case, just nvflash again. I just did that for a couple of friend @work, quick and easy.
so just run the same file that i used to root it in the first place?? is there a link for that i can't find it
link in second post nvflash+ stock rom.
bricked transformer
so the problem i see now is that i can't get the t.f. off how would i enter apx mode if i can't it to turn off or should i just follow dirrections as stated with out it being off/
bfitzpatrickd2d said:
so the problem i see now is that i can't get the t.f. off how would i enter apx mode if i can't it to turn off or should i just follow dirrections as stated with out it being off/
Click to expand...
Click to collapse
You will need to start with the device turned off before entering APX mode.
thanks guys i am retarted a bit i found a way to get into recovery i am now restoreing nand. hope all is well.
bfitzpatrickd2d said:
so the problem i see now is that i can't get the t.f. off how would i enter apx mode if i can't it to turn off or should i just follow dirrections as stated with out it being off/
Click to expand...
Click to collapse
Hold Vol+ and then press the powerbutton until screen turnes black. You should hold it down a few more second to make shure APX mode is activated.
This works for me when I stuck at a bootloop.
Your problem is caused by prime's shutdown menu mods (recovery or reboot mod), you just need to flash http://www.sdx-downloads.com/devs/roach2010/Mods/Remove_Power_Button_Mod.zip with CWM.

Broken CWM

I have flashed the CWM from TF201 by accident. Now the tablet is stuck in that CWM mode. I can't connect to usb using adb mode. Power+volume down does not work anymore. Any way I can reflash the correct CWM?
THanks
If you can boot to OS - you can use fastboot to flash any recovery.. or flash TWRP from goomanager.
upd: sry..don't see about "stuck".
abe_cedar said:
I have flashed the CWM from TF201 by accident. Now the tablet is stuck in that CWM mode. I can't connect to usb using adb mode. Power+volume down does not work anymore. Any way I can reflash the correct CWM?
THanks
Click to expand...
Click to collapse
I have made the same mistake. Although I can get the device to fastboot USB mode. I have tried to use CWM with the restore I made before I put in Cyanogenmod 9, as well as putting on the Cyanogenmod experimental #2 for TF300. No error messages at all and it wipes data and cash without any problems.
But I get locked on the Asus boot screen and it does not continue ie I am stuck as well.
I have as well tried to use the TWRP 2.1.5. I get the Teamwin loggo screen, it wipes all the data and verifies all the filesystems and reboots. Still stuck.
Is the device bricked ?
upd:The TF300 can not be shutoff either. When you hold the power button the screen goes black, but after ~5 s the device is starting again and is still stuck on the Asus bootup screen.
if you reboot it holding vol down and power, can you get back into the boot menu, to reselect fastboot?
if holding the power button doesn't switch it off, what happens if you leave it to run out of batteries then do this?
then you can flash the correct recovery.img
cheedear said:
if you reboot it holding vol down and power, can you get back into the boot menu, to reselect fastboot?
if holding the power button doesn't switch it off, what happens if you leave it to run out of batteries then do this?
then you can flash the correct recovery.img
Click to expand...
Click to collapse
Yes, I can get access to the fastboot and I have already tried to flash with the recovery.img. I have as well let the battery run out and tried it once more with the same result.
Still stuck on the asus bootup screen.
power
Hare,
I have same problem.tab cannot power off. Just reboots into cwm.
I was thinking to drain bat. Thanks for sharing that info.
There are a lot of topics about people who broke their devices with TF201's recovery.
Afaik, no one recovered it. Send to Asus.
So the device is bricked then :'(.
Thanks for clearing it up.
Sent from my GT-I9100 using XDA
RMA..
Guillaume,
Thanks for clarification.
I have read that ASUS wants 700USD for replacing/reflashing the bootloader. That was for the tf201. Any way to nvflash it back to factory? I don't believe that they have to change the MB.
I have no warranty left, but I don't want to be gouged by them either.
Any thoughts, info?
Hi,
I've do the same mistake, but I can use adb.
Do youhave any news about our problem?
Thanks
Midyr
unable to power off
My issue is that I have the CWM for the tf201. I did the update from the CWM app in Android. Bad idea. So now the tab does not power off s.t. I can get into the power+vol down mode. Adb does not work since I cannot ( don't know how) to make it go into the usb debugging mode. I have tried several things none of which have worked. Still stuck.
I wanted some feedback for a RMA from ASUS, posted it here but sor far no answers.
Not sure if it would really work, but on my Evo, I don't have to completely power off the phone to do the recovery sequence. I can do it during a normal reboot. There is a point just before the device starts booting again where it is technically "off", and if I hold volume down (don't even have to hold power on my Evo; volume down seems to be the only necessary button) starting at this point, the phone will boot into the bootloader.
So, next time the device reboots, just start holding volume down (possibly power also, just in case) at the "off" point.

[Q] Stuck In Clockworkmod Recovery, no Fastboot

I just rooted my One S using this thread: http://forum.xda-developers.com/showthread.php?t=2008440. I flashed Clockworkmod touch recovery and installed the latest CM10 Nightly. I ended up installing the standard Clockworkmod recovery (non touch) through ROM manager once my phone was up and running. Everything on my phone was working great until I let my battery run all the way down to the point my phone shut off. I plugged my phone in and it automatically booted to recovery. I waited a little bit for the phone to charge and selected "reboot system now" from recovery. My phone did not boot and only goes to recovery. When it reboots, it briefly flashes a green stripe twice in the upper third of the screen prior to booting all the way but never shows the HTC screen or anything other than recovery. I tried reflashing the ROM in recovery, formatting every partition in recovery, entering fasboot using ADB, rebooting using ADB, and nothing seems to get my phone to do anything other than boot to recovery. I tried running the latest RUU and it fails (presumably because it can't enter fasboot). I tried pressing and holding volume+, -, and the power button at the same time, I tried holding just the volume down button while holding the power button, but no luck so far.
Is there a way to reflash the recovery from ADB while the phone is in recovery? Is there any other way I can force my phone into fastboot? Can I safely use the method in this thread http://forum.xda-developers.com/showthread.php?t=1990043 to "unbrick" my phone by entering commands via ADB shell while in recovery rather than in terminal emulator? Thanks in advance for all the collective XDA wisdom that I'm sure will help get my phone back up and running.
Hey I had the same problem about a week ago. Are you sure you used the latest the RUU file?
chilaca91 said:
Hey I had the same problem about a week ago. Are you sure you used the latest the RUU file?
Click to expand...
Click to collapse
I'm using RUU_Ville_U_ICS_40_S_TMOUS_2.35.531.7_Radio_1.08ts.50.02.16_10.08e.50.04L_release_279577_signed.exe. I don't think it would matter which one I used though because it gives me an error that says it can't connect to the phone.
Try holding down the power button for 10 sec and then let go of the power and hold down the volume button. I had to do this a couple of times until I finally got into the bootloader
Sent from my One S using xda app-developers app
chilaca91 said:
Try holding down the power button for 10 sec and then let go of the power and hold down the volume button. I had to do this a couple of times until I finally got into the bootloader
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Amazing! That did the trick. Thanks a ton for that info. I knew it would be something simple.
I also had a similar problem. Seemed to occur only when I had the USB cable plugged into the phone. Once I removed it, I could then get into fastboot. Once I was in fastboot, I simply plugged the USB cable back in, and everything worked flawlessly.
All that crap you got wouldn't have happened if you use TWRP instead of CWM.

CWM corrupt, infuse bricked

The CWM file in my Infuse 4g is corrupt. When holding down volume up + volume down and pressing power button; CWM restore comes up but is garbled. I can not use it. Is there anyway to solve this? The phone is bricked.
That is due to missing GB bootloaders. Search around and you will find how to flash them on download mode.
Use qkster's uclb3 heimdall one-click twice, the second time with the bootloaders checkbox ticked on.
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
dlw1146 said:
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
Click to expand...
Click to collapse
Do what andros11 said above
Sent from my SGH-I997 using xda premium
dlw1146 said:
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
Click to expand...
Click to collapse
You said you used "modmanager"... did you mean ROM manager? ROM manager doesn't play well with most of these ROMs. Could be part of the problem. Get rid if it and do what andros11 said.
Sent from my SGH-I997 using xda premium
she Mbrumbe
It's working! Thank you all.
dlw
What did you do to fix it?
Sent from my SGH-I997 using xda premium
Did as andros11 suggested.
Use qkster's uclb3 heimdall one-click twice, the second time with the bootloaders checkbox ticked on.
All went well.
Also, can I root with this update?
dlw
Follow instructions in the 2nd post in the following:
http://forum.xda-developers.com/showthread.php?p=23118144
Sent from my SGH-I997 using xda premium
Having trouble getting into 'download mode' after flashing.
With data cable connected to PC and phone.
vol down + vol up + power = e3 recovery
vol down + power = normal boot
vol up + power = normal boot
Without data cable connected to phone same as above.
How do I get back into 'downoad mode'?
dlw
dlw1146 said:
Having trouble getting into 'download mode' after flashing.
With data cable connected to PC and phone.
vol down + vol up + power = e3 recovery
vol down + power = normal boot
vol up + power = normal boot
Without data cable connected to phone same as above.
How do I get back into 'downoad mode'?
dlw
Click to expand...
Click to collapse
Pull battery
Put battery back in
Hold volume +/- at the same time
Connect phone to pc while holding volume
Sent from my HTC PH39100 using Tapatalk 2
Thanks a million.
dlw
Deleted.
Sent from my SGH-I997 using xda premium
If you know how to solder make a jig, They'll save you lots of time if you have trouble getting in to Download mode.
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
Or you can buy them cheaply on flee-bay

Categories

Resources