I put the update and recovery in the internal sd card. I installed tnt and when I rebooted I went into a boot loop.
I then put update.zip and recovery ( changing to sdcard2 in command) and I see the box. It installs then it reboots into a boot loop.
What should I try next?
big tony said:
I put the update and recovery in the internal sd card. I installed tnt and when I rebooted I went into a boot loop.
I then put update.zip and recovery ( changing to sdcard2 in command) and I see the box. It installs then it reboots into a boot loop.
What should I try next?
Click to expand...
Click to collapse
Per this very imformative guide: http://forum.xda-developers.com/showthread.php?t=865245
If your tablet bootloops…
Press and hold the power button to shut the device down. Boot back into Clockwork. Select the advanced option at the bottom, then go to “partition SD card”, for the first option select 4096, and for the second option select 64. Then, redo steps 7-10.
big tony said:
I put the update and recovery in the internal sd card. I installed tnt and when I rebooted I went into a boot loop.
I then put update.zip and recovery ( changing to sdcard2 in command) and I see the box. It installs then it reboots into a boot loop.
What should I try next?
Click to expand...
Click to collapse
Follow same procedure with microsd 2, but this time install Clockwork .8. Same setup with placing Clockwork on the device.
Once installed you can access Clockwork at power-up by pressing power + volume up. Once there, clear the cache and data (two options on main screen and use volume to scroll and home to select). You should boot up now. If not, some of the XDA elders may need to chime in to help.
If still in bootloop, open Clockwork again, but this time go to bottom to activate USB storage. Connect USB and then activate- this should show you the internal space. Place the TnT 2.4 update in the root of it (no recovery directory).
1. Deactivate USB storage
2. Clean cache and data
3. Chose install update.zip
4. Pick the update.zip
Should be out of the loop once complete.
Try a reflash, clear cache, wipe the user data (in that order, try the next if the previous did not work). Worst case scenario is re-partitioning the SD card which seems to work most of the time.
I have mentioned this before, but I really think that our devices are either not imaged properly or our SD partitions become corrupt over time. I would also argue that clockworkmod is really a requirement for anyone using these mods. It's so critical when problems like this occur.
I tried this:
Instructions for those with clockworkmod .08:
- Extract the RAR and place the update.zip file anywhere in /sdcard (do NOT just copy the original RAR, that won't work! You have to open up the RAR and copy the update.zip inside. You don't need the /recovery folder for cwm). I would recommend putting the file on the root of /sdcard, since it will be easier to upgrade that way.
- Reboot into recovery. Do a backup first, as that's always a good idea.
- Then, choose "apply sdcard:update.zip", assuming you added the update.zip to the root of /sdcard, and run it.
- Reboot.
Note: I have heard reports that this might "Status 7" and I have no fix for that, yet. It seems to be intermittent.
-----------------------------------------------------------
Clockworkmod v.08 only update.zip (for technical users only!) :
I installed the sd card update and I still get the same reboot loop. What am I doing wrong?
The flash was probably successful, but a boot loop occurred afterwards. This does happen. Since you have clockworkmod, you have a lot of things you can do, as I mentioned.
I got it running.
I fixed the adoble flash, installed a pdf viewer, and titanium backup.
I cant't see the tabs in titanium backup for some reason.
My screen does not auto rotate even thought its set to auto rotate.
Install Adw.Launcher , if you want it to rotate.
Related
Hi
i stalled clockworkmod as described here but when i try to pull it up with the (volume + and power button) all it does is go into the reboot kernal thing and shows the install box and then boots up to normal screen. Did i miss a step somewhere?
thanks
jt
Did you make sure you did it from actual SD Card? (not internal storage).
I followed the steps as well and got the files suggested. I did not root my device however. I'm running the newest build of the stock TnT UI.
I put the update.zip on the root of my SD Card and then the folder recovery (with command in it) on the SD Card as well. I flashed it using the stock method. It didn't look like it flashed but when I powered down and went through the ropes I boot into CWM.
tmak67 said:
Hi
i stalled clockworkmod as described here but when i try to pull it up with the (volume + and power button) all it does is go into the reboot kernal thing and shows the install box and then boots up to normal screen. Did i miss a step somewhere?
thanks
jt
Click to expand...
Click to collapse
Sounds like you did not install CW. When you unpack the install, it should look like this:
/sdcard/update.zip
/sdcard/recovery/command
If either of those is not exactly like that, it will not work.
Thanks rothnic,
that was the fix, got it working now
I've got CM, Titanium backup, and Vegan on the SD card ready to go, but when I hit power and volume, see a quick download icon, then nothing.
I feel like an idiot.
----
I went back, cleared the sd card and left the update.zip
and recovery/command.
Still nothing.
try moving to the CM files to the sdcard not the sdcard2 (i tried running it from the external microsd but moving to the internal sdcard seemed to work) also makesure the files on the sdcard are moved to the right place on the sdcard just like:
/sdcard/update.zip
/sdcard/recovery/command
as described from rothnic's post in this thread
I am having the same problem....
I applied the latest update before trying this...
Any Ideas?
I just got my new g tablet and the new update fails everytime, so I'm trying to flash the new update 3389 using recovery mode. But only some small words pop up in the upper left side, but no status bar or anything else. What am I doing wrong?
What words?
It reads " detect a recovery key pressed booting recovery kernel image "
Should I put an SD card in?
I would highly advise you install Clockworkmod.
If you do not wish to do so, try to remove the recovery image off your internal SD card. I have found after flashing a TnT stock or Lite ROM, you must remove the recovery image or you'll end up in reboot mode forever.
If you don't have Clockworkmod, you may be forced to use an external SD card to install the original stock ROM.
Or....reflash whatever update.zip file you have. It may allow you to boot into the ROM once and then you could delete the recovery image before rebooting.
Luckily I flashed TnT Lite which also installed clockworkmod. I was able to hook my tablet up to the PC and mount it as a drive. I removed the recovery file and victory was mine!
Sent from my GTablet-TnT-Lite using Tapatalk
was running vegan with all fixes and flash but decided to try TnT Lite... I successfully flashed Tnt Lite BUT then I decided to also partition the sdcard (2048 and 0) in case it boot looped on me. I rebooted and it boot looped.
I cant access sdcard 1 (on board mem) because of the boot loop and it won't recognize sdcard 2 (my micro sd). I have backup files of stock Tnt but no backup of me running vegan. What can i do?
Thanks so much in advance!!
Been there done that.
Now is a good time to start reading up on Nvflash. You will need the correct usb driver for your operating system
You had clockwork mod or rom manager installed right?
ACis014
Just checking details: /sdcard1 would not be a real folder.
/sdcard is the folder where the recover and update.zip files go.
/sdcard2 is the external microSD card slot
You didn't say but you must have CWM (clockworkmod) if you partitioned. CWM .08 works.
Put "recovery" with a "command" file edited to point to /sdcard2 -- along with the CWM update.zip file on the root of the microSD.
If you can hold down the power key long enough to get the unit to shut off, the put in the external microSD with the CWM stuff on it and do the power/Vol+ recovery start.
If it loads CWM, then you will be back to a point where you can load something that works using CWM.
Rev
Hey guys I screwed up. I installed rom manager and flashed the latest recovery before I realized I needed the .08 version. Google was ineffective for me when searching for a solution. How do I revert?
Sent from my SGH-T959 using XDA App
Download CWM (ClockWorkMod) v8 to your PC. Extract it to get the "Recovery" and "Update.zip" files.
Use a test editor to edit the file named "Command" under Recovery, changing sdcard to sdcard2.
Then put both files in the root of a microSD card.
Put the microSD into the external slot. Then hold down and Vol+ button while turning on the power. You will get a "Recovery" boot message on the left corner of the white background.
It will install CWM, hopefully, and then you can reboot with the power/Vol+ combo to bring up CWM.
If you can get CWM installed then you can hook the tablet to your PC via the USB cable. If it links up and gives you a drive letter for the tablet, you can create a folder named downloads and if it does that you can put the update.zip for your version in it.
From there you disconnect, boot into CWM, find the zip in download on your sdcard, and hopefully install it.
I know I've covered a lot too fast. If you have questions as them. If anyone sees and error or a better way -- jump right in.
Hope this helps.
Rev
I've got that far, but it still appears nothing is getting installed. I get to the black screen and the install down arrow pops up then quickly goes away. Should I uninstall Rom Manager?
The command file already had sdcard2 on it.
Boot your tablet using power/vol+. If it doesn't enter clockwork recovery then clockwork is not installed.
You can try this:
In rom manager scroll down to the bottom and look for "Flash Alternate Recovery". It should read "ClockworkMod 2.5.1.1-bekit-0.8" Click it and it will flash that recovery. I wouldn't recommend using rom manager to flash roms.
You guys rock! Thank you. got it!
Why can't CWM see the ROMS I have on the SD Card? I don't have to edit the perms do I?
cwm cant see the external sdcard. Make sure any roms you downloaded are not .rar files and they are on the internal sdcard.
sorry guys but i made an "uh oh" and need help please! i had Virtuous Unity 1.31.0 & was attempting to flash the beta version. i had blue magic theme on my rom as well. Here are the exact steps i took: downloaded rom, put phone in clockwork recovery, wiped dalvik, wiped cache, wiped data, mounted system, flashed the zip & rebooted. Now i'm looped in the "blue magic" boot animation. what'd i do wrong & can it be fixed. i backed everything up too. i can get it into HBOOT screen by pressing power & down on volume key but am not able to scroll to any of the options. after a cple seconds it automatically selects HBOOT & asks if i want to install update from sd? i assume it's the gingrbread update but i've selected "no" every time so i could talk to someone first. right noe i'm on a publis cpu & it won't allow me to access the phone internals. i need admin passcode. i haven't messed much with playing with my phone thru a cpu so i'm not quite sure i'm even doing it right. sorry for my cpu lack of knowledge but i've adapted to android pretty well. Help please & thank u in advance
problem is that you have a PD98IMG.zip file on your sdcard....
pull the sdcard, boot into HBOOT, select recovery, then pop in the sdcard when you get to recovery
Pirateghost said:
problem is that you have a PD98IMG.zip file on your sdcard....
pull the sdcard, boot into HBOOT, select recovery, then pop in the sdcard when you get to recovery
Click to expand...
Click to collapse
Yup. If you happen to have a PD98IMG.zip on your SD, bootloader will try to flash it everytime and you won't be able to access Recovery. Either pull the SD card until after you've selected Recovery like pirateghost suggested, or find a card reader/other device to read your card to delete PD98IMG.zip
Ok sweet. That got me back to clockwork, slipped the card back in once in recovery, clicked reboot and it still looped. It did say I had that file so I'm guessing I have to find a card reader and delete the file maually now or did I do something wrong?
Thanks so much for ur reply and it looks like I'm going to have to find a card reader and do it manually cuz it still loops. Thank u so much!
Just go in recovery rewipe and flash the beta rom only no themes yet let it reboot it should load right up I think the theme messed you up the bata rom is based I'm 2.3.4 so 2.3.3 themes wont work
sent from my unity loaded inspire 4G
Ok, did all that but Noticed before I rebooted that at the bottom where it shows the processes it's going thru, it says installation aborted. Says E:Can't open/Sd card/ download etc...2.33.0 BETA.zip....(bad). Do I still reboot or attempt to flash again?
Try going into mounts option in recovery and mount the external sd card.
Not giving option to mount. Only unmount so I guess I unmount and try to remount?
Try that and see if it works.
Aborted again. I'm getting worried friend
Still aborted. I'm getting worried friend
Don't worry. It will work out fine. Let me check something and I will reply momentarily.
Thank u so much for helping. I'm wishing I could pay u at this point
Don't worry. Turn off phone. Check to make sure sd card is properly inserted. Power phone back up and boot into recovery. Select install zip and see if you are able to view your files.
Well I can go to install the zip but still aborts
Try going to backup and restore and select restore. Select the backup you said you made and try restoring to your backup. You may have a bad download of the beta rom. Let me know if you can restore. Wipe first.
What happens If I scroll down to that PD98IMG.zip u were talkin bout. I see it on the zip file list...
You don't want to use that. That type of file can only be used in Hboot. It seems like you can see what is on your sd card so it is mounted. The rom file you were trying to flash may be corrupted. Unless you can get another rom on your sd card I would say restore to your backup until you can get another rom on your card and also delete that PD98IMG file.
if it says corrupted that means that your ROM file is corrupted or didnt fully downloaded.
1.Turn Off Phone
2.Take out SD Card
3.Vol+Power to Hboot
4.You will be at recovery mode.
5.Insert Sd Card back in
6.go to Mount
7.Mount your SD CARD(make sure USB is plugged in the computer)
8.Wait a little, your computer will have pop-up, if not go to My computer and click on your Sd Card.
9.Drag in a new fully downloaded rom into it.
10.Unmount the Sd Card
11.Happy Flashing!
sorry if this does not work, tried my best to help. This worked on me, so It should work for you as well.
another method is, if you got a Card Reader(micro chip goes in side a big chip) then put your ROM in their and delete the PD19 blah file, and skip steps 6 to 10