Has anyone figured out to make the nexus s work properly on WIND Mobile. I tried using the guide that was made for the samsung vibrant but the main command needed (*#*#197328640#*#*) doesn't work. I was able to get both data and voice/text working (havent tried MMS and voicemail yet) but the network is not displayed as WIND Home, it actually says 302490 (which is part of the APN setting)
Link to samsung vibrant troubleshoot on wind: http://forum.xda-developers.com/showthread.php?t=747625
Let me know if anyone figures out how to get everything working
Ill edit this post if i come across any new information.
Thank you
That's really weird. Let me know how it goes mines on its way and I'm on wind as well.
A generic Android way:
On dialer, dial *#*#4636#*#* and select phone info, then choose WCDMA only.
Related
Hi. I've found this site to be very helpful in my attempts to activate an Alltel HTC Hero cdma on the Page Plus network.
I finally got the phone to make calls, but it says that I'm roaming - there's a triangle above the signal strength meter. I checked it by making a call and it charges me the roaming rate of $0.29 a minute. I think I need an updated .prl file, but I'm not sure.
I'm able to send and receive text. I cannot send or receive MMS or connect to the internet.
Maybe someone here can help me. Please
Phone will be used in Berlin, WI 54923 (Near the following cities: Appleton, Oshkosh, Neenah, Fond du Lac)
Original phone details:
Alltel network, but Alltel is no longer in my area. Alltel customers were sent to Element One. I don't know if this affects what I'm trying to do.
Phone # (MDN) 920xxxxxxx
MSID (MIN) 9202900444
SIN/NID 1/65535
MMS Server url mms.alltel.com/servlets/mms
I rooted the phone and got my MSL (000000) number and made the following changes
Phone # (MDN) 920xxxxxxx
MSID (MIN) 9202799238 (from Page Plus)
SIN/NID 240/65535 (got "240" from Page Plus, they couldn't give me a NID number so I used the same one)
MMS Server url mms.vtext.com/servlets/mms (got this from searching on forums)
I downloaded a .prl file via KittyWireless manual programming instructions kittywireless.com/pageplus/pageplusmanualprogramming.html
I updated the PRL from my sd card by dailing ##775# and "commit changes"
When I make a call, I'm always asked to re-enter the 10 digit phone number I'm trying to reach. I've tried the following OTA programming numbers *228, *22800, *22888, *22890, *22891. I always get the following "Message AP 32 Welcome to US Cellular ..." It should be Verizon or Alltel, right?
I thought I might be using the wrong NID number so I tried 65335 (which I think is for Verizon), but it didn't make a difference. Still roaming and same messages when I try OTA programming.
I don't know if this means anything, but when I dial ##DATA# to edit mode I can choose either Data Profile, EVDO, or Advanced. If I choose EVDO, I get a blank screen. I can't make any changes.
So, I'm thinking I need a different prl file. Would this affect my data connection for internet and MMS too? What do you guys think? Can someone direct me to the right PRL file?
I've spent hours trying to get this phone to work... if you have any suggestions let me know.
Thanks!
PRL Update...
Hi there..
I've found the following PRLs useful when using Sprint Phones on Pageplus, so perhaps they will help with the Alltel Hero. I've used 51425m on my Alltel Hero on Pageplus. Worked like a charm. The 52505m is the latest VZW EvDo PRL.
Noticed the thread is old, but may help anyone else trying to do this.
Ive been trying to get 3g data working with my Nexus S on Pageplus.
All I can get is either a good 1X data connection or a slow, intermittent 3g connection.
I will try these PRL's when I get home.
Thanks!
any luck on getting this working yet ??? I can not find any solutions anywhere
You contact your carriers
8=D
I've did the QPST setting changes do it and I have Talk Text and 1X internet working but 3G and MMS still remain a mystery to me even though I've changed the APNs on this sucker.
Another thing to note is that when I edit the PPP AN username, it reverts back to the sprint username instead of the one I edited it to cricket. The UM actually sticks but not the AN.
been trying to figure this out for a while. Then I may just dump this rom so no one else has to bother with such a hassle
Any progress yet I'm trying to find the info on doing the same?
I have made progress, I'm down to just figuring out how to fix video play on 3G and mms settings. I do have 3G working now and it's pretty fast on the cricket network, about the same speed as using my 7Mbps (or mbps, I forgot which) DSL internet. 513kb download and 533kb upload.
Do you know how to make a backup of a rom on these 8600? I can't seem to update from 2.1 without it being hooked up to a sprint network or something. And the two roms I found on the internet 2.1 and 2.2 are not doing it, because the 2.2 has issues reading the NVRAM info and the 2.1 has problems with the camera feature on the phone (the camera just stops working...)
I'm gonna post a guide to this once I figure this out, I think this phone deserves it since no material is on the internet for it. If someone google searchs this and finds this post, can you please help me with backuping up my rom? xD
I've got 3G working good but any ideas as to what's still causing mms to not work? I've unpacked the Mms.apk and saw no references to the provider in it and I took a look in telephony.db and saw that the APN settings were correct for cricket. Any other files that affect mms settings on sprint phones (or androids in general?)
sanyo zio
hey how did u get the 3g to stick in qpst an settings i have been tryin for along time to get it to stick
Hey guys, I recently unlocked and rooted my Infuse 4G from ATT
Im currently living in Panama and using CLARO, I got the correct APN settings,and everything, and the internet works.. "Sometimes" I have gone to the store to obtain help incase it was something on their network, but there is nothing wrong with the network, Next I tied Replacing my sim into my friend who just got the Galaxy S 2, And it worked fine.
The problem In my case seems to be That I cannot maintain a stable Data Connection, It keeps dropping and activating back randomly, if I reboot the phone it will bring data back to it 75% of the time.. but only for a short period.. maybe 5-10 mins at most, then it disappears again.
Im just wondering if anyone that is using the Infuse 4g in a foreign country has or is experiencing a similar issue, or if anyone can explain why this is happening and if there is a way to fix it.
Im waiting for Infused to come back up to put gingerbread on the phone and hopefully fix this issue.. but I fear it will require more.
To answer my own question I found a solution and testing a second
**Just want to add when I say toggle Softkey, I mean the button to the far left at the bottom**
Solution#1 to get Infuse 4G DATA working on Claro Network Panama:
Goto phone type *#*#197328640#*#*
Goto Debug-->PHONE CONTROL-->NETWORK CONTROL-->BAND SELECTION-->GSM BANDS-->GSM 1900-->Toggle Soft Key-->back-->toggle soft key-->END
This will give you a stable EDGE connection on the Infuse 4G
I will post a possible 3G fix after I have tested the setting for more than a day.
OK so Im pretty confident I got the 3G working now, if you experience this issue of losing Data on the network in other foreign countries to USA/CANADA this might help you out aswell.
**Just want to add when I say toggle Softkey, I mean the button to the far left at the bottom**
So again goto phone dial *#*#197328640#*#*
Goto DEBUG SCREEN-->PHONE CONTROL-->HSPA CAT CONTROL-->HSDPA DISABLE-->Toggle soft key-->Back-->toggle soft key-->END
If you followed my steps to gain access to EDGE you must do this also
DEBUG SCREEN--> PHONE CONTROL --> NETWORK CONTROL -->BAND SELECTION --> AUTOMATIC --> TOGGLE SOFT KEY --> BACK--> TOGGLE SOFT KEY --> END
so that you can access the other bands for 3G
Hope this helps people.
Also Would like to Add that Im using INFUSED v2.0.4 http://forum.xda-developers.com/showthread.php?t=1220088
and I switched to the ROGERS MODEM http://forum.xda-developers.com/showthread.php?t=1173704
With these settings applied.
The other way around this is if you install the Infused ROM it'll give you the option to manually lock to the network. The AT&T ROM has ATT roaming partner preference built in... super annoying, but is what it is. I had issues where putting in a foreign SIM I could only attach to networks AT&T had roaming agreeements with even though it wasn't an ATT sim and the non-ATT stock ROM solved it for me.
I saw network locking also in the debug menu, is that what you are talking about?
I cannot find any network locking within the normal menus.. if there is could you guide me to it please.
well I tried the lock via the debug menu.. and did not work when I enabled HSDPA.. maybe the issue isnt a foreign carrier issue or combination of a foreign carrier or just the fact that its a carrier that offer 4G but only on contract.
I was speaking to a friend last night, and he said when he was in the US he was experiencing a similar problem with ATT and the people at ATT said the phone will experience these issues on networks that have the ability of 4G or the HSDPA+ higher speeds since we know that its not real 4G.. so the phone attempts to connect or do whatever it does to obtain those higher speeds of HSDPA+, but is being refused by the network because you need to be on contract or have it enabled.. which then in turn causes it to disconnect all together from the data network.
So it made sense to disable to the HSDPA in the scenario.. I might add that by doing this on CLARO you do not get the full 3G experience its slower from about 2Mbit down to .50 Mbit but its still better than edge. and the HSUPA works fine with a 2Mbit Upload.
Im going to obtain a contracted SIM today with 4G enabled.. and remove all the steps I listed above to confirm that this is actually case.
I will post my results when I get the chip.
I am from the Android world, zero experience with WP7 and I want to buy this exact phone and possibly flash a custom ROM
and the goal is to get this to work on Page Plus (Verizon MVNO) and NOT Sprint
the phone is currently set up for C-Spire - a smaller CDMA carrier in Mississippi (formerly Cellular South)
I have access to CDMA workshop and other CDMA tools, such as qpst
I need Verizon coverage and a REAL keyboard at a cheap price ($55/month) and this looks like it could be the ticket!
I had the same question and found a post from bing searches with someone claiming to have succeeded in activating it on Page Plus. Unfortunately the person never really detailed how he did it.
I'd still like to know how it can be done.
The Arrive can be flashed to P+. I'm using one on it. You'll need the paid CDMAWS, not the hacked version.
Also, before you do this, remember that the 3G will be intermittent. The reason for this is that you cannot upload the authentication file to the phone's file system, so the phone never gets true 3G, it cycles between connecting and 1XRTT. To make this work properly, you'll need to have a ROM loaded that's a direct port from the HTC Trophy, or an Arrive ROM that has the Verizon operator package in it. I've yet to learn how to do this, but as time permits, I'll figure it out. I've got a few requests in to ansar and leadpoizon, two ROM Chefs that are heavily involved in GOLD_C (our phone's) development here.
Here's what I did:
1. Put the phone in Diag Mode, using ##MFG# on the phone dialer and connect to CDMAWS.
2. Obtain your MSL/SPC by using the HTC Method, then write it to 000000.
3. Program the phone using CDMAWS just as you would an android device; put in MIN, MDN and set your data settings to your#@vzw3g.com.
4. Load a modded PRL to put the phone on Verizon's Towers, and lose the roam triangle. (Attached)
5. Call P+ and give them the MEID of the Arrive. They'll tell you to do *22890, but do NOT do it.
6. Once they say it's active, make a test call, and enjoy your Arrive.
The steps above will give you voice calls, SMS, and spotty 3G. MMS will not work, unless you hack the registry of the phone. The phone works great with WiFi, though.
If you're brave, try forcing the phone into 1X by finding a non-EvDo PRL. You'll be showing that you're roaming, but it may yield better data results. If you do set 1X though, be sure to set MIP type (in CDMAWS) to Simple IP.
Post here w/ questions, if you have any...
And dont tell me to use the search box. If you know a better way to search be my guest and let me know. Maybe I dont know the terms used that will yield good search results.
It seems to me that every one abandoned the TP2 before ST = (StraightTalk) started the Bring Your Own Phone Program so this may have never been discussed yet.
So I got the voice, SMS and data working. But my phone is still trying to connect to sprints server to download the pictures people sent me via MMS. Where do I input the MMS settings ST gave me? The only setting I could find was for APN and when I updated that the data started working. The rest of the fields are not there with the APN.
I am using the AT&T sim from Strait Talk. I have the Sprint TP2 with my Straight Talk sim card in it. Set to GSM only. The worst part is EDGE speed is slower then Sprints 1X.
A nice guy help me fix this here at this link in post 2 and 3. http://forum.xda-developers.com/showthread.php?p=28468462#post28468462