please i need your help
i flashed wrong Hard Spl in my jamin
and now my jamin didn't turn on without charger
and when i try to make conection with usb it turn off and screen flash for a second and turn off
is there is any solve or any thing can i flash from external memory to solve this problem
Related
I have Prophet G3, and upgraded it with IPL/SPL 3.08, all went ok, and gave a successful message, but it restarted and went black and refuse to start in anyway, when i press the power button, it flash with a very weak light on the screen (hardly seen) and the indicators flash also with a very light red light on the top and a very light green light on the bottom one,
please help if anyone knows what happened.
Try this, should help:
http://forum.xda-developers.com/showthread.php?t=319636
I do , But still not working
Thanks any way !
uhm ... if you dont found any issue ... send me a PM!
i have a working g4 doc and can replace your damage g3 doc.
chavdar said:
Try this, should help:
http://forum.xda-developers.com/showthread.php?t=319636
Click to expand...
Click to collapse
this should really work. i had exactly the same issue (with lights blinking). the part with hotwiring with the charger was essential in my case. that was the only way i could boot the device in order to reapply ipl and spl (if ipl is ok, device should be able to start into boot mode, so no hotwiring necessary anymore)
I'm trying with everything and all what I have but it's still flashing
Hi
I connected directly by my charge cable (cutting charger cable ) and it's work but the problem is I can't downgrade SPL 3.08
Can some one help me to downgrade from SPL:3.08 to SPL:2.20
info.: now my IPL is 2.20 and my SPL is 3.08
My Prophet is G3 JamIN
My best regards,
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
^^ ...
hahaha....
now .... charging your phone ... and then turn on your PDA , at the bootloader screen (red,blue,green ... ) , connect you phone with PC .... you will see the USB at the bottom of the screen ... then .... install with the original ROM ...
here is the ROM
http://tom-love.net/Rom/Prophet/WM6.0/Prophet_PV_Temp.zip
i allready did that, and the error 300 keeps coming
what else can i do
ac ... ^^
your phone is G3 .... not G4 ... ^^
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000 is G3
try G3 ....
did you read it before !!!
http://forum.xda-developers.com/showthread.php?t=321839
I have done upgrade to my prophet now he is dead not turning on,not charging and not going on forced bootloader mode....please help in need urgent help........
The problem was that all is done ok,SPL upgrade,radio rom upgrade,Hard SPL all needed for upgrade him to WM6.1.But when i strarted to upgrade to WM6.1 my computer restarted by himself and now I cant connetct to pc anymore ,and not going to bootloader mode............
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
OmenCheppy said:
hello guys! i have a WIZA200. i'm was flashing it to wizflo2d ROm. at 99% my PC suddenly rebooted. my MDA is stucked with the red,green,blue screen. with IPL 2.26 SPL 2.26. activesync cannot detect it. how can i revive my MDA? please help...
BTW, i'm using TNT's new released ROM when i was flashing it to WizFlo2D.
thanks in advance
Click to expand...
Click to collapse
Hi,
No problem, be cool. Few months ago I had this problem and was solved.
Just connect the device with bootloader onscreen (RGB). You will see USB on bottom. Flash the official ROM.
After your device is stable, you can flash to any custom ROM.
Thanking You
I've just posted this in another thread but I'll give you the same reply..
---
Try starting in bootloader mode then flashing the Wizard Love rom using the included RUU, or failing that Mun's RUU (included with WizFlo).
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
You need to start the phone in bootloader mode without the usb cable plugged in, give it a few seconds, then plug the cable in.. wait for the USB icon to appear in the bottom left corner, then start your RUU. I've found that the order is very important when dealing with unflashable wizards.
I've unbricked my phone twice with this method.. You could flash Wizard Love to a loaf of bread if you could get the cable to stick in it.
---
I used this to recover a flash that died at 10%, when I couldnt even get the official rom to work, so hopefully it should help you.
Hi every one, I really need help. i just bought an imate spl and wanted to upgrade from wm5 to wm6, i had to find out wheather its a g3 or g4 but. i made a boot by holding the 6key and power botton but this was interrupted now my phone is dead, no charge, no responce to anything even when i try to upgrade again. pls help anything i can do?