Related
DISCLAIMER
Proceed at your own risk. I am not responsible for ANY outcome (good or bad) as a result of YOUR actions! Even following this guide perfectly (or any other cooked ROM guide) you could (however remote the possibility) BRICK your device. IF you choose to follow this guide READ all the way through as a "dry run" until all the steps make some sense.
GATHER YOUR SUPPLIES
Phone (fully charged)
SD card (in your phone)
Computer (w/internet access)
USB cable (one that fits your phone) OR a card reader + micro SD adapter
Download these files onto your pc:
Android 1.5 base image SAPPIMG.nbh_____________________(33d958062cc02bb2cec157f68621d2ff)
To install ALT recovery flashrec _________________________(try the latest, if it fails work backward)
Alternate Recovery img recovery-RA-sapphire-v1.5.2G.img___(md5sum - 4822fd118867bb2e66a53243a408f40e)
Android 1.6 base image DRC83_base_defanged.zip__________(md5sum - 081379e9b525484bcd1ee42bd0031a4c)
CyanogenMod Rom img CyanogenMod ROM of choice________(4.2.14.1 md5sum - c2a1e549d9296d97566e86a0a1c4bc9c)
Android ring tone pack audio-resources.zip________________(md5sum - 6cbefb897e2fb3b954d19c692d5c6966)
32A users I am researching the right files/steps to get ya'll onto CM, read this page of cyanogenmod wiki in the meantime
[*]32B UK users if my method doesn't work try this post from a user on this thread
(NOTE: If any of these links 'die' Google the file name & pm me so I can update the link)
Md5sum Values
how to check md5sum in windows : MD5summer use this program to make an md5sum file & compare values
how to check md5sum in unix/linux : in terminal type 'md5sum /path/to/file.name' [enter] & compare values
Do this once the files are on your SD card to ensure no device-to-device file transfer corruption
BACK UP YOUR FILES
Before doing ANY mods you should ALWAYS backup your important files.
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy any & all files/folders you want to keep.
On the pc: Close the SD card folder on your pc.
On the phone: pull down the notification bar & press ->USB Connected->Un-mount/Turn off USB storage. Once this is done remove USB cable.
(NOTE: By the end of this guide EVERYTHING on your card will be GONE so don't skip this step!)
FORMAT SD CARD
From the home screen press Menu->Settings->SD card & phone storage->Un-mount SD card.
Once it is un-mounted press ->Format SD card.
Once it is formatted & has re-mounted go back to the home screen and press Menu->Settings->Applications->make sure 'Unknown sources' is checked.
(NOTE: if your phone is already ROOTED & running a Custom/Cooked ROM you can likely skip the SETUP section just check Amon_RA's thread for alternate install options)
SETUP
Find out what version of Android your phone has installed. From the home screen Press Menu->Settings->About phone-> scroll to Firmware Version.
(this is your Android Version)
If you're on Android 1.5 proceed to INSTALL section.
If you're on Android 1.6 re-connect phone to pc.
Copy the sappimg.nbh & place it on your SD card, then close everything & disconnect USB. (I am told this MUST be the only file on your SDcard or the validation will fail)
Turn off phone.
Boot into 'Fast Boot' like this: Press-&-Hold END/Power AND Pres-&-Hold Volume Down until the Fast Boot screen appears.
Press the trackball (action button) and wait for it to flash the sappimg.nbh
Once fully complete reboot phone & proceed to INSTALL section.
INSTALL
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy the FlashRec.apk & the Amon RA recovery.img onto your SD card.
If you don’t have a ‘file manager’ or ‘app manager’ go to the market & download one such as: ASTRO, LINDA, AppManager or the like. Then browse to your SD card & open/run the flashrec.apk to install it. (if asked what to open with choose Package Installer)
Open RecoveryFlash (flashrec) & make a backup of your current recovery.img. Flashrec just made "recovery-backup.img" on the root of your SDcard, so now rename Amon Ra's recovery to "recovery-backup.img" (choose replace when the dulpicate file name message appears) then open flashrec again & choose restore recovery. (Credit for this step goes to deb82swearingen Much easier then the orig method I was shone for using flashrec)
Once the flash is complete turn the phone off.
Boot into 'Recovery' like this: Press-&-Hold END/Power AND Pres-&-Hold Home. (this will be a black background with green text options)
Scroll down to ‘partition’ (press trackball to select)->partition SD->follow onscreen steps (HOME=confirm, VOL +/- changes partition size, any other key=cancel).
Once partitioning is complete press BACK to get to partition menu & scroll down to 'SD:ext2 to ext3’ press trackball to select (if you have a class 4 or 6 SD card you can then go for 'SD:ext3 to ext4' but don't try it on class2 cards it will cause system instability & likely FRY your SD card... if you don't know your class stop @ ext3).
go BACK until top says "Android system recovery" ->Connect phone to pc & scroll to 'USB-MS toggle'->HOME to confirm.
Copy the HTC 1.6 BASE & CyanogenMod ROM & Contacts.apk files onto your SD card then close the SD card folder on your PC & toggle USB-MS again, then disconnect from the pc.
Scroll to & select ‘wipe'->wipe data partition->CONFIRM
Scroll to & select ‘Flash update image->Apply sdcard:choose zip & select the HTC BASE file & let it complete (this will take a few min be patient). DO NOT REBOOT!
Scroll to & select ‘Flash update image->Apply sdcard:choose zip & select the CyanogenMod file & let it complete (this will take a few min be patient).
Once the flash is complete reboot phone (this will take up words of 5-10min+ be patient).
Once up & running on latest CyanogenMod connect to pc again & unzip the audio-resources.zip directly onto your SD card.
**************************Only Applies To CM 4.2.13**************************
Fixed Contacts.apk
Now that you have 4.2.13 installed it's time to fix the bug listed in Cyan's change-log. We will do this by replacing the broken Contacts app with the fixed Contacts.apk that you downloaded. If you get a pop-up asking about giving super user rights just hit the check mark to remember this answer & press 'yes'. This is UNIX & UNIX is unforgiving so pay attention to all punctuation, symbols, UPPER CASE & lower case. They are different & if you don't do it exactly it won't work. (UNIX assumes that you know what you want it to do so it will do whatever you tell it to, even if what you tell it to do breaks it.) So long as you are able to type what you see this is easy
Open Terminal Emulator & type these lines (hitting enter at the [E])
su [E]
mount -o rw,remount /system [E]
cp /sdcard/Contacts.apk /system/app/Contacts.apk [E]
mount -o ro,remount /system [E]
reboot [E]
(The reboot is precautionary but generally a good idea anytime you replace /system files.)
**************************************************************************
Themes/Modding
Now for those not fond of the plain Android theme you may enjoy this little app that has a growing movement backing it, read about what MetaMorph is here and then see the fast growing list of 'morphs/themes' available here.
Signatures
Now that you're a part of the modding community please For The Love Of MODDING take a moment to put the specs for your phone/ROM/theme/etc into your sig so that in the future if you have questions those of us who try to answer you don't have to play forum tag to get this basic info from you.
~psguardian
P.S. THANKS fhaines !!!!
fhaines spent days sifting through the forums to pick all these tidbits out of the masses of G1 ROM flashing posts & forwarded it to me so I could flash my MT3G, I want to say thank you to fhaines for his hard work. I just worked out the formatting & simplified the verbiage to as plain English as I could. Hope this helps those who are a bit timid to test the CM Rom waters (as I was).
Is it required to partition the sdcard, or is that just for Apps2SD & swap?
lupascu.marius: It's only if you want to use Apps2SD and swap.
Apps2sd and swap
Wysie said:
lupascu.marius: It's only if you want to use Apps2SD and swap.
Click to expand...
Click to collapse
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
fhaines said:
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
Click to expand...
Click to collapse
is it possible to just create an ext3/ext4 and swap only without using apps2sd? Or do i need a fat32 partition?
If I am not wrong the has to be rooted to apply cm? In which step of this tutorial does the phone gets root?
Nicely done!
A few days too late for me, unfortunately, but it's nice to know that I ended up with essentially the same procedure. My notes are quite a bit more disjointed than your instructions, however.
It'll be a good refresher once it's time to root my wife's phone, however.
Great Resource for noobs and advanced alike
I believe this should be stickied.
Damn you beat me to it. I have been looking for WEEKS on a sure fire way to root my MyTouch 3G. I tried the Relentless Rooter, the Gold Card method and everything else I could find to throw at this thing.
The steps outlined here are slightly different from what I did, but all in all, this is what worked for me, was nice, easy and worked great. The first time you Root a phone it takes a bit to get the process down, but it's not as hard as you think.
If this hasn't been stickied, it needs to be!
Looks good but I have a few questions.
I am currently running on CM 4.1.999 (1.6) and my phone is running very smoothly. I tried 4.1.9999 but it started to bog down and seriously slowed down. I've got quite a few apps and I've got the phone set up as I like it (including changing some of the icons with bettercut and that kind of stuff) I'm getting to the point where I'm a bit loathe to go through all that again, so my question is; what are the real world advantages I might enjoy if I "upgraded" to 4.2?
palexr said:
Looks good but I have a few questions.
I am currently running on CM 4.1.999 (1.6) and my phone is running very smoothly. I tried 4.1.9999 but it started to bog down and seriously slowed down. I've got quite a few apps and I've got the phone set up as I like it (including changing some of the icons with bettercut and that kind of stuff) I'm getting to the point where I'm a bit loathe to go through all that again, so my question is; what are the real world advantages I might enjoy if I "upgraded" to 4.2?
Click to expand...
Click to collapse
Have you tried CM updater? It can be downloaded from the market and should just upgrade your current rom.
Weemoney said:
Have you tried CM updater? It can be downloaded from the market and should just upgrade your current rom.
Click to expand...
Click to collapse
OK, thanks, I thought it had been switched off so to speak after the Google episode.
My main question remains though, are there any benefits? I know, I know, go and look at the thread in the Dream section but still, CM4.1.999 really does work very well on my Magic and I think it deserves representation here.
Allied to a good theme it is by far and away the best ROM for the Magic IMHO.
Im running it now and have no issues. It is very fast and reliable. I think its worth the upgrade.
Right You Are
smurf said:
If I am not wrong the has to be rooted to apply cm? In which step of this tutorial does the phone gets root?
Click to expand...
Click to collapse
You do need to be rooted to apply a CM ROM (or any other 'cooked ROM' I think), HERE is where you are officially Rooted as I understand the process.
psguardian said:
INSTALL
Connect phone to pc via USB
On the phone: pull down the notification bar & press ->USB Connected->Mount
On the pc: copy the FlashRec.apk & the Amon RA recovery.img onto your SD card.
If you don’t have a ‘file manager’ or ‘app manager’ go to the market & download one such as: ASTRO, LINDA, AppManager or the like. Then browse to your SD card & open/run the flashrec.apk to install it. (if asked what to open with choose Package Installer)
Open RecoveryFlash (flashrec) & press Backup Recovery Image.
Once it’s finished press in the text box & clear out the box, then put /sdcard/recovery-RA-dream-v1.2.3.img & press Flash Custom Recovery Image.
Once the flash is complete turn the phone off.
Boot into 'Recovery' like this: Press-&-Hold END/Power AND Pres-&-Hold Home. (this will be a black background with a screen full of options)
Scroll down to ‘part SD fat32+ext2+swap’ press trackball to select.
Once partitioning is complete scroll down to ‘then select convert ext2 to ext3’ press trackball to select.
Reboot phone.
Connect phone to pc after reboot & mount USB storage
Copy the HTC ADP 1.6 DRC83 & CyanogenMod 4.2.2 ROM files onto your SD card then disconnect from the pc & turn off phone.
Boot into 'Recovery', scroll to & select ‘nandroid backup’ & let it complete.
Scroll to & select ‘wipe data/factory reset’ & let it complete.
Scroll to & select ‘apply SD card: choose zip’ and select the HTC ADP file & let it complete (this will take a few min be patient).
Scroll to & select ‘apply SD card: choose zip’ and select the CyanogenMod file & let it complete (this will take a few min be patient).
Once the flash is complete reboot phone (this will take up words of 5min+ be patient).
Once up & running on latest CyanogenMod connect to pc again & unzip the audio-resources.zip onto your SD card.
Click to expand...
Click to collapse
fhaines said:
Cyanogenmods newest roms run fastest with a swap and ext3 partition on the sd card. If you run it with just a fat32 and or ext2 you will most likely be running the rom a lot slower than was designed.
fhaines
Click to expand...
Click to collapse
Quick question, I've followed the procedure posted on here step by step exactly and once I boot the phone up right after the android loading screen it goes to a black screen and sits there for a long time. Here's a thread I started asking for help with this, it has more info on my problem, thanks for anyone trying to help.
http://forum.xda-developers.com/showthread.php?t=578208
Things to check
lupascu.marius said:
Quick question, I've followed the procedure posted on here step by step exactly and once I boot the phone up right after the android loading screen it goes to a black screen and sits there for a long time. Here's a thread I started asking for help with this, it has more info on my problem, thanks for anyone trying to help.
http://forum.xda-developers.com/showthread.php?t=578208
Click to expand...
Click to collapse
Hey,
Couple of things to check and make sure of. You have to be on factory 1.5 before doing the upgrade to the Rooted HTC rom and Cyanogens rom, cannot do this from 1.6. Also, there is a wipe involved in the process, and if its skipped it may account for the FC's. Also there is a fix permission file you can run after installation and initial boot that may help with the FC's, its located in CM's thread in the Dream section where the rom is.
Fhaines
fhaines said:
Hey,
Couple of things to check and make sure of. You have to be on factory 1.5 before doing the upgrade to the Rooted HTC rom and Cyanogens rom, cannot do this from 1.6. Also, there is a wipe involved in the process, and if its skipped it may account for the FC's. Also there is a fix permission file you can run after installation and initial boot that may help with the FC's.
Fhaines
Click to expand...
Click to collapse
Yes, it is on the factory cupcake build when i start to try and install CM. The weird thing is i have had Cyanogenmod for a long time and have been doing upgrades and everything worked untill now. I upgraded to CM 4.2.1 and after that CM stopped working on my phone. I can confirm that 'other' rooted roms do work..so it seems like its just CM. Thanks
lupascu.marius said:
Yes, it is on the factory cupcake build when i start to try and install CM. The weird thing is i have had Cyanogenmod for a long time and have been doing upgrades and everything worked untill now. I upgraded to CM 4.2.1 and after that CM stopped working on my phone. I can confirm that 'other' rooted roms do work..so it seems like its just CM. Thanks
Click to expand...
Click to collapse
Quick update for anyone with any ideas. I finally got it to boot up and it runs great except for two things I've notices so far. When i try to add widgets nothing pops up and when i go to settings the window comes up for half a second then goes away and back to home screen. Now what I did to fix it was partition the sd card which i was told is NOT necessary. Then after i got it to work i tried again with a sdcard that was NOT partitioned and it did the same thing again, black screen no-go. So it seems like if you don't partition the sdcard on some phones the phone freezes at a black screen. Keywords being "some phones". So for anybody who knows how to fix the widget and settings problems not opening, please help me....Thanks
lupascu.marius said:
Quick update for anyone with any ideas. I finally got it to boot up and it runs great except for two things I've notices so far. When i try to add widgets nothing pops up and when i go to settings the window comes up for half a second then goes away and back to home screen. Now what I did to fix it was partition the sd card which i was told is NOT necessary. Then after i got it to work i tried again with a sdcard that was NOT partitioned and it did the same thing again, black screen no-go. So it seems like if you don't partition the sdcard on some phones the phone freezes at a black screen. Keywords being "some phones". So for anybody who knows how to fix the widget and settings problems not opening, please help me....Thanks
Click to expand...
Click to collapse
I don't think it has anything to do with SD partition type. Im running cm with a fat sd. everything's fine.
Nice lil issue...
Once it’s finished press in the text box & clear out the box, then put /sdcard/recovery-RA-dream-v1.2.3.img & press Flash Custom Recovery Image
I dont have this option when i try to flash the .img
it says Download Recovery Image and it is actually grayed out??
THIS GUIDE HAS BEEN REDONE. PLEASE VISIT THIS THREAD:
http://forum.xda-developers.com/showthread.php?t=761819
Just reading through the document now, seems the first link, http://www.soft‐go.com/get/Samsung‐Kies_79632.html isn't working. Not sure if the site is just down right now or if there's a mistake.
Rad_Fishy said:
Just reading through the document now, seems the first link, http://www.soft‐go.com/get/Samsung‐Kies_79632.html isn't working. Not sure if the site is just down right now or if there's a mistake.
Click to expand...
Click to collapse
Thank you I didn't actually add that link it was from systoxity, but i will fix it.
nbs11 said:
Thank you I didn't actually add that link it was from systoxity, but i will fix it.
Click to expand...
Click to collapse
I Fixed it
A few small things:
Intel should be intel.
Under CPU Optimization:
"Samsung’s CPU is set by default the run at 1gHz."
The should be to.
Sideloading:
"(don’t forget that after you install it from the market you still have to go to your app drawer and run busybox once so it installs)."
Should this be after you download it from the market?
ClockworkMod Recovery:
"ClockworkMod written for us by a developer that goes by the name of Koush"
Missing is.
"This gent puts a ton of work into helping us captivate owners out"
Replace puts with put and Capitalize Captivate.
Changing Your Messaging Ringtone:
"well the ones that matter anyway.."
Extra period.
Other than that, excellent guide. I'll definitely be using it when my Captivate arrives.
Rad_Fishy said:
A few small things:
Intel should be intel.
Under CPU Optimization:
"Samsung’s CPU is set by default the run at 1gHz."
The should be to.
Sideloading:
"(don’t forget that after you install it from the market you still have to go to your app drawer and run busybox once so it installs)."
Should this be after you download it from the market?
ClockworkMod Recovery:
"ClockworkMod written for us by a developer that goes by the name of Koush"
Missing is.
"This gent puts a ton of work into helping us captivate owners out"
Replace puts with put and Capitalize Captivate.
Changing Your Messaging Ringtone:
"well the ones that matter anyway.."
Extra period.
Other than that, excellent guide. I'll definitely be using it when my Captivate arrives.
Click to expand...
Click to collapse
Thanks! I fixed all those errors but I'm not gonna upload the new version just yet because I will keep finding more errors so it just seems wasteful. I did not actually write most of the guide myself I just formatted it so there may be some mistakes I didn't pick up on.
i used this guide today and it delivered.
orlandoxpolice said:
i used this guide today and it delivered.
Click to expand...
Click to collapse
If there was anything you found difficult or anything you would like to change just tell me and I will add it to tonight's update.
Hi,
Thanks for publishing this. It looks very useful, similar to Energy ROM.. But I am very new to Android phones (trying this on Samsung Captivate from AT&T, bought yesterday). I am running windows 7 ultimate 64bit and I exactly followed this guide. But somehow I am still not able to see the sd card. I tried placing the update.zip at Computer\SGH-I897\Phone and shut down the phone and tried restarting the phone by holding the up/down keys as well as power button. But after selecting reinstall packages it said could not find /sdcard/update.zip.. Pls held. Again very sorry if I did some mistake..
ask_j said:
Hi,
Thanks for publishing this. It looks very useful, similar to Energy ROM.. But I am very new to Android phones (trying this on Samsung Captivate from AT&T, bought yesterday). I am running windows 7 ultimate 64bit and I exactly followed this guide. But somehow I am still not able to see the sd card. I tried placing the update.zip at Computer\SGH-I897\Phone and shut down the phone and tried restarting the phone by holding the up/down keys as well as power button. But after selecting reinstall packages it said could not find /sdcard/update.zip.. Pls held. Again very sorry if I did some mistake..
Click to expand...
Click to collapse
The SD card is simply the root directory of your phone. You do not need to open a folder, it is the highest folder you can place it in. Hope that helps
Somehow it was not able to find the sdcard root. Then I realized that you mentioned something called as Droid Explorer, I searched for it and installed it on my PC. But when I opened Droid Explorer, my device was not recognized, then I clicked on link on the explorer window, upon watching that video I enabled the USB Debugging, then I was able to see my device, then I selected connect to my device. After that I saw an explorer but it had empty root and I was not able to copy anything. There was a menu button at the top row named "Transfer to device or Copy to device" I selected that and selected update.zip file and tried to transfer. Something happened but still explorer was empty. Then from my phone Top slide down menu I selected mount USB storage and I started seeing windows explorer on my PC. Then apart from other folders I could see a folder sd in the root. Then I again put update.zip in the root.
Then followed the restart sequence, this time it found the file but exited after Signal 7. It was trying to asert something but could not find the correct model number I guess. My cell phone's model number is Samsung i897.
Please help
ask_j said:
Somehow it was not able to find the sdcard root. Then I realized that you mentioned something called as Droid Explorer, I searched for it and installed it on my PC. But when I opened Droid Explorer, my device was not recognized, then I clicked on link on the explorer window, upon watching that video I enabled the USB Debugging, then I was able to see my device, then I selected connect to my device. After that I saw an explorer but it had empty root and I was not able to copy anything. There was a menu button at the top row named "Transfer to device or Copy to device" I selected that and selected update.zip file and tried to transfer. Something happened but still explorer was empty. Then from my phone Top slide down menu I selected mount USB storage and I started seeing windows explorer on my PC. Then apart from other folders I could see a folder sd in the root. Then I again put update.zip in the root.
Then followed the restart sequence, this time it found the file but exited after Signal 7. It was trying to asert something but could not find the correct model number I guess. My cell phone's model number is Samsung i897.
Please help
Click to expand...
Click to collapse
I did not write the PC instructions, so I can not help you (I only have a Mac). But the person who did can probably help you his username is systoxity.
Because not enough errors were found to make it worthwhile to update the PDF i will wait till tomorrow to fix the minor errors.
Good source of information
Thank you for putting this together. I am going to sticky this for the time being.
For installing the latest version of busy box, you should include that before the instructions for running titanium backup...the latest version of busybox installed from the market will work with titanium backup so theres no need to have to click the "problems" button...this way you wont have to do the busybox download step twice...should also save a few megs since titanium backup wont have its own copy of busybox installed BTW nice guide
You can also just mount the phone memory using windows explorer and move the file over. I was never able to get droid explorer to transfer the file. It always said it went but then was never there.
Anyway all I did was connected just as I was going to connect to kies but then when windows asked me what I wanted to do I clicked on open file view and dropped updated.zip on my phone.
Only issue that I had with rooting was I accidentally opened the file in windows(winrar). After I moved the file over it found it and attempted to install it but then exited with an error(do not remember exact error), but had to do with mounting. Anyway I re-downloaded file and saw file size was different. After I moved the file over again everything went great. I still haven't removed bloat-ware and such but thats next on the agenda.
Also I was on windows 7 64 bit, saw some other users in other threads saying they had issues connecting the phone. Everything so far has worked great for me
Thank you very much for this handy pdf file!
Somelinks aren't working
First of all I have to say very good guide for noobs!
1. when I downloaded the update.zip folder I didn't work I guess because the name of Samsung captivate is not in the folder or something. So I just downloaded the other file from the forums.
2. Link to CPU optimization doesn't work.
3. I downloaded the droid explorer. It connected to my phone but I was unable to transfer anything. So I just tapped on the USB connected in the notification bar and mounted the phone. This allowed me to use windows explorer to transfer files. I believe one can transfer files by selecting the option of Samsung Kies under USB settings.
I got all your feedback. It will all be corrected by tomorrow night.
Cool guide however the rumor is the GPS only gets turned on when pulling up an App that uses it, so that step in the "battery saving" section might not be necessary.
Also you may want to replace Market Enabler with Market Access. It's a rehash of Market Enabler but also has a Set on Boot option that keeps it persistent versus being reset each time.
You also Might want to add a Tips/Tricks Section..
Here You can put some cool tips like the one i found out about backlight control.
(found here: http://forum.xda-developers.com/showthread.php?t=735394 )
Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next
iluuvmochi said:
Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next
Click to expand...
Click to collapse
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps
MEG4LOM4NI4C said:
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps
Click to expand...
Click to collapse
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders
iluuvmochi said:
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders
Click to expand...
Click to collapse
so your not using Clockworkmod Recovery then? just flashing directll to NAND?
---------- Post added at 02:16 AM ---------- Previous post was at 01:59 AM ----------
Most newer roms are compatible only with Clockworkmod Recovery (aka CWM or CWR). u must install this after maglr.
Just went over to the OP for hyperdroid v 3.0.1. thats why in the file u downloaded says: Hyperdroid-CWM-v3.0.0-MAGLDR-CWM-ZIP.
*note the bolded abbreviations... means u need Clockworkmod Recovery for this rom to work... not hard just an extra step that i highly recommend
There are roms that dont require this and a few ways around it as well but its easier to just install CWM. like i mentioned before seems most (all the ones ive used in the past ten months) roms are going this route for CWMods added features and benefits
Heres a little guide i cooked up bout an hour ago in another thread to help
I just posted this in another thread to clear some things up for some guys shortly after my first reply to you....guess ya inspired me in a way, hahaha. you might be more concered with steps 5 through 6 seeing as how you already have MAGLDR installed...... hope this clears up the process for you a bit
............................excerpted from previous post........................................
********BTW i have attached a little template that i use when flashing various roms and storing them on my PC. has task29, HSPL & MAGLDR already in it. all u need to do is go to the xda hd2 master radio thread to grab your appropriate radio and put that into the empty radio file. then find the rom you want to test out and usually the developer will have both rom (obviously) and the appropriate CWM that u should use with it and just put those in their respective empty folders i have in the attached file. that way all the steps below will line up to the files i have attached
OH YEAH, FORGOT... THESE STEPS ARE TO BE DONE AFTER THE INITIAL PREREQUISITES i.e. windows mobile device center, activesync, proper spl version...blah blah blah
--------the following steps 1 - 4 are to be preformed while at the tri-color boot screen (easiest way to reach is to turn off your phone while its connected to your PC then immediately hold volume down button till you see it n wait for it to say usb in the white section).
(by the way your device will ALWAYS automatically restart itself after a couple seconds if it is shut down while plugged in via USB to either a wall/car charger or hooked up to a PC this is normal and a small hiccup either due to the use of magldr or the hspl but dont worry)...cant quite remember
1. run task 29
-double click the only icon in file if your using the one provided by doloop
-wait for it to run and do its thing. when its finished it will automatically turn off your device so be sure to hold down the volume key as soon as it does.
2. install radio
-run the "customRUU" file with the HD2 icon in the radio of your choosing
-it will operate in a similar fashion as the task 29, automatically turning off device upon completion.... down on the vol key
3. install hspl3/hspl4
-run the "HSPL3_PKG/HSPL4_PKG" file. should be the only one in there
-make sure you select 2.08.HSPL in the setup and it will execute itself just like the installers in the previous two steps n turn off your phone... down vol key
4. install magldr113
-make sure your selecting "rom update utility" in the magldr113 file. dont run the "DAF" it wont work properly if you do and youll get errors
-BUT THIS TIME AS IT TURNS ITSELF OFF HOLD DOWN THE POWER BUTTON ON YOUR DEVICE AS IT BOOTS UP UNTIL U GET TO MAGLDR AND CONTINUE TO HOLD IT DOWN UNTIL YOU SEE ABOUT 12 DIFFERENT OPTIONS...
5. install CWM recovery
-go to option 5 "USB Flasher" and hit the green call key. wait a few moments till it shows USB....USB make sure the second usb pops up and your PC recognizes the connection. then when it does sync you get to......
-while still in the usb flasher mode above, simply run you desired CWM recovery which should the one your developer recommends for the builds as the requirements tend to vary from rom to rom.
-this is achieved by selecting the "DAF" file from the clockworkmod recovery your using
-and again this installer will shut off your device upon completion and HOLD DOWN THE POWER KEY LIKE ABOVE TILL YOUR BACK AT THE MAGLDR MAIN MENU (with options 1-12).
6. install rom
-go to option 8 "AD Recovery" and hit the green call button to enter into the CWM recovery u just installed
-after it loads up (GO!GO!GO!) go down to the "mounts and storage" option that is third from the bottom and hit the call key.
-once there go to the last option "mount USB storage" and hit the call key.
-give your PC a few moments to recognize the sd card for your device and choose to open it when your PC prompts with the regular file explorer or just find it and double click on the newly recognized drive (sdcard) if your PC doesnt auto prompt you.
-the new drive (sdcard) should be empty (depending...) then just find the desired rom you chose to use, right click on it and copy.....then over to the new drive (sdcard) and paste. might take a min or two depending on the roms size
-once the copying is complete hit the call button to "unmount" your sdcard then the back button on your device till your back at the CWM main screen
-go to the fifth option down and "install zip from sdcard" and hit the call button
-select the second option "choose zip from sdcard" and select the zip file you just copied to your sdcard. then it will begin to install the rom and all rom install times vary by build. some take a minute, some seem like they take forever.
-once installation is complete hit the back button till your back at CWM main screen and choose the last option which is to "power off"
-then tap the power button(if u unplugged it from usb otherwise it wil reboot by itself) to turn on your device and give it some time for the initial boot and load as it has to set up everything u just installed. subsequent boot wont take as long but again it can all vary from rom to rom.
-after initial load and a successful bootup you should arrive at ether the lockscreen or a startup screen. give the rom a few more mins to settle and dont hit any buttons. then unlock the device or skip through the startup options and get to the home screen. maybe give it another min to settle the launcher and the last bit of data and resist the urge to mess with the features. your gonna hate this but hold down the power button and select power off device from the popup menu. i know it sucks but it is best practice when flashing roms. after device shuts off wait a few seconds and turn it back on and let it reboot. should be faster this time and when u get to your lockscreen simply give it a few seconds to settle again, unlock and go to main launcher a wait a couple more seconds for it to finish settling and.....have fun! (every time i restart my device for any reason i will always give it a few moments to finish loading up before just blazing away with the apps)
WOW! maybe its not so abridged after all, but oh well tried my best to be as clear as possible so people can utilize their HD2 to its fullest potential.
HOPE THIS HELPS AND PLEASE HIT THE THANKS BUTTON IF IT HAS
Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?
Starting HD2 ANDROID SO FRESH N SO CLEAN!
iluuvmochi said:
Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?
Click to expand...
Click to collapse
well what the task29 does is pretty much whipe your whole devices NAND (internal) memory. it wont wipe your radio or the HSPL. it takes care of wiping the rest of the space (MAGLDR and CWM).
so your options are as follows:
-try fix permissions trough CWM
-wiping davlik cache (helps clean up issues with apps n such possibly your market situation, but this could be largely due to the type of rom your using as well as none are perfect...some are really close)
or start fresh to minimize chances for errors and force closes
do this by restarting your device into CWM
-in CWM execute the following commands in the following order (this is a little overkill but better safe than sorry i suppose).
at main CWM screen
-wipe data/factory reset
-wipe cache partition
then at main CWM screen go under "mounts and storage"
-format /boot
-format /cache
-format /data
-format /sdcard
-format /system
-format /sd-ext (only if u made one)
then back at main CWM go under "advance"
-wipe davlik cache
-can also find fix permissions here if needed i personally havent used this much(but maybe i should be every once n awhile...might be good practice)
at this point your ready to start at step one in my guide two posts up....run task29 at tri-color boot screen and so on and so on
*********Please note that the use of CWM is essential for most current builds that utilize a rom-zip format. not sure about sd card builds as i havent used them. i came into the hd2 flashing game right when they got it to run solely out of NAND. just seemed like a better way to do it to me but i could be wrong
hope this helps and lemme know if everything worked out for you. also include the rom you are attempting to install for further assistance. and also corrections are always welcome as i am definitely no developer just have a knack for nerdy stuff (sometimes)
Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!
iluuvmochi said:
Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!
Click to expand...
Click to collapse
Hmmmm where to start....
You were in CWM when u copied the rom to the phone... remember? to get there turn off device then restart it while holding down the power button to get you to MAGLDR. Option 9. AD Recovery = ClockworkMod Recovery (aka CWM or CWR) in there is where u use my little wipe/fresh install guide
The version of Hyperdroid your using is from a months ago. Pongster has released v.3.0.0 "the insightful impala" with a hotfix to version 3.0.1. I would recommend using that as most of your market issues will be addressed i would imagine.
i attatched a file in my previous post... download it. it comes with the task29(provided by doloop), HSPL3, and MAGLDR113 that i use. the lil guide i posted follows how i have the files in the "HD2 rom template" arranged. if you unzip the attached file (use 7zip,winrar....etc) youll see files labeled 1-6 (1.task29 2.radio 3.HSPL 4.MAGLDR 5.CWM 6.ROM). the radio file is empty because i was unable to compress it enough to include it( there is a 8mb attachment limit ) The CWM file and rom file are blank as well because both will vary from build to build.
if u use my attachment as a kind of template it will make the steps easier to go thru thats why they are numbered
to get the appropriate radio on xda type a search for "radio master thread" and open the post. there you will see a bunch of different radios. BE CAREFUL SOME MIGHT BRICK YOUR DEVICE!!! read the post it explains which ones not to use i believe. the one i use and have noticed a lot of others use is 2.15.50.14.... has always worked for me. download it and put it in the empty radio file in my template.
now go back to Pongsters hyperdroid cm7 OP and download both the version 3.0.0 and also download the v3.0.1 hotfix and put both of the zip files in the empty rom folder.
in Pongsters second post he has the CWM for you that youll need if you already dont have it (its on step three of his little guide on his second post) download and put that in the empty CWM file in the template.
now that you have all the files you need and in a nice tidy order.... reflash time!!!!
follow my "fresh install/wipe/format procedure" in my previous post then use my install guide post afew posts up and follow it using the lil template i provided and that u put the radio,CWM,rom & hotfix into
notice how the 1-6 steps in my install guide follow the 1-6 on my "HD2 rom template" attachment?
******oh yeah when u get to the installing the rom step only install the v3.0.0 zip via CWM first and follow the recommended new rom startup section at the end of my lil guide. make sure the rom has had plenty of time to settle and everything like it says n go ahead and play around with it a little and try it out. but then after u rebooted it a couple times like it says reboot it a third time into CWM and go to the install zip from sdcard option and go in and install the hotfix(sorry i tend to repeat myself sometimes)
lemme know how it goes and have u tride Tyweens rom??? Its pretty good itself in case your not crazy about the Hyperdroids' minimalistic and monocrome look. Both are great though.....
---------- Post added at 01:36 PM ---------- Previous post was at 01:31 PM ----------
oh yeah go to www.android.hd2roms.com for a site i use that someone made that kinda keeps track of most of the HD2 roms floating around on xda. its pretty acurate and gets updated constantly. help u see most of the flavors of android on the HD2.
YEY!
YEEEEEEEEY! IT WORKED! you are AWESOME! thank you so so so so so much! if it wasn't for your guidance i wouldn't be able to understand it! i did all the stuff you told me and it worked! i didn't have any problems while flashing my phone! did i say thank you already? THANK YOU!!!!!
and thank you for all the links that you suggested it was really helpful! thank you thank you thank you!!
THIS METHOD:
- ONLY WORKED FOR ICS (Android 4.0.x)
- IT WILL NOT WORK FOR THE SGS3 RUNNING JELLY BEAN (Android 4.1.x)
But I hate it when threads say that ^ or worse...
they don't get updated and you read it and/or try it for NOTHING!
So here you go...
CLICK HERE FOR AN AWESOME JELLY BEAN THREAD
Step by step guide to Root your phone, Unlock the bootloader, and then install ClockWorkMod Recovery. Also some unnecessary mods at the bottom if you're interested. I know there is another really well written guide for rooting the SGS3 and other mods but I wanted to post this and hope to get it sticky'd for the beginners
************************************************************
DISCLAIMER:
I am not responsible for any damage that happens to your device. I've made this guide as simple as possible and include less risky methods to achieve root and simple modifications. If you follow a link from this guide I am not responsible for the content on that page, read it in full yourself.
************************************************************
Confirmed working with newest VZW update/patch:
I535VRALG1
I535VRALG7
I535VRALF2
I535VRLHE -- Thanks DHamilton44!
GETTING ROOTED:
Navigate to https://www.dropbox.com/sh/1aksh2bikfsne43/wmpWRj7Und
Download:
- Verizon_Wireless... (USB Drivers for SGS3)
- Root Debug FS.7z... (7zip (freeware) file used to one-click root)
Credit to Noxous Ninjas as he created this program. It's the best I've found to easily root my S3 without feeling the need to baby sit the phone during rooting.
Thanks Droidstyle for reminding me about the credits Noxous Ninjas deserves!
Install (Computer):
- USB drivers
- Unzip Root Debug tool to a folder of your choice
Enable USB Debugging and Unknown Sources (Phone):
- Settings -> Developer Options -> Tick USB debugging
- Settings -> Security -> Tick Unknown source
Plug in phone to computer using OEM USB cable:
- Allow the drivers to complete (the little balloon pop-up in the right hand corner will say "Device ready/installed" -something to that effect)
MUST BE RAN AS ADMINISTRATOR
Navigate to your extracted Root Debug FS folder (Computer):
- Double-click "RootDebugfs"
- Choose option 1 (press 1 and then enter)
- Read the disclaimer, IF YOU AGREE, press y, then enter
- USB drivers reminder appears, press any key to continue
- Unknown Sources/USB Debugging reminder appears, press any key to continue
- Yet another informational message appears (READ THIS ONE), then press any key to continue
- Root process starts -> WAIT UNTIL IT COMPLETES | DO NOT UNPLUG YOUR DEVICE
- Once complete you will need to open the Superuser app and click through the initial dialog to actually start the program/allow it to run in the background. -- Thanks Whyzor!
ON YOUR PHONE: Navigate to https://www.dropbox.com/sh/1aksh2bikfsne43/wmpWRj7Und
Download the following from the APKs folder:
- ez_unlock.apk (Also found on Google Play store, free)
- rom_manager.apk (Also found on Google Play store, free)
- Normally when downloading them right to your phone it will immediately prompt you to install them, choose install in both instances
- Open your app drawer and open EZ-Unlock
- Accept/Grant the app SuperUser permissions, select Unlock, you should hear "That was easy" and the word "Unlocked" should show in green at the top of the screen
BEFORE CONTINUING: it is recommended that you are connected to a stable WiFi network to ensure a successful flash!
- Open your app drawer again and open ROM Manager
- Select "Flash ClockworkMod Recovery"
- Find and select "Samsung Galaxy S3 (Verizon)"
- You'll see the blue bar at the top indicating progress, when it nears the end you'll need to Accept/Grant the app SuperUser permissions
- You may receive a message that Touch recovery is available, install if you'd like (I have read some posts a week or two ago about Touch recovery not always working flawlessly though, just FYI)
***AT THIS POINT ROOTING, BOOTLOADER UNLOCKING, AND CWM RECOVERY ARE COMPLETED/INSTALLED***
RECOMMENDED! BUT OPTIONAL: MAKING A NANDROID BACKUP
- I would recommend having your preferred apps and home screens set up prior to making a recovery
- From the ROM Manager application select "Reboot into Recovery"
- FYI: Recovery mode can be entered manually as well, turn the phone off.
- While off, press AND HOLD Vol. Up, Home, Power
- Once you see the "Samsung" boot screen you can release (There will also be some blue text in the top left hand corner, this indicates recovery mode is booting)
- Recovery mode navigation: Vol. Up/Down moves the selection, Power selects it
- Select "backup and restore"
- Select "backup to external sdcard"
- Wait for it to finish (Usually takes about 5 minutes)
- Select back to get to the main menu
CONGRATS!
- If all that worked your phone is now rooted and (hopefully) a backup has been made after rooting. This way if you start tinkering and break something you can (hopefully) restore back to this recovery.
REMOVE PERSISTANT/ONGOING WIFI NOTIFICATION AND POPUP (REQUIRES ROOT)
ON PHONE: Navigate to Google Play https://play.google.com/store/apps/details?id=com.speedsoftware.sqleditor
- Download: SQLite (Yes it's a paid app, support our Devs!)
- Open the app, Accept/Grant the app Superuser permissions
- Select Settings Storage
- Select settings.db
- Select system
- Long-press "wifi_offload_network_notify"
- Select "Edit Record"
- Change the value field to "0" (zero)
- Select Save
- Press back key
- Select "Secure"
- Long-press "wifi_networks_available_notification_on"
- Select "Edit Record"
- Change the value field to "0" (zero)
- Select Save
- Reboot your phone
UI MODS (Not necessary but are definitely improvements in the UI)
- Notification bar toggles mod: http://forum.xda-developers.com/showthread.php?t=1775235
- More (personalized versions): http://forum.xda-developers.com/showpost.php?p=28829000&postcount=67
--Above files are flashed using recovery
HOW TO: FLASH A .ZIP USING RECOVERY (REQUIRES ROOT & UNLOCKED BOOTLOADER)
**ONLY FLASH A ZIP UPDATE THAT IS COMPATIBLE WITH YOUR MODEL AND OS**
- Know where you downloaded the file to (Preferrably external SD card)
- Reboot into recovery
- Choose "install zip from sdcard"
- Choose "install zip from (external) sdcard" -or wherever you saved it
- Choose the desired file you want to flash
- Scroll up (it's quicker) to select "Yes - ..."
- The file(s) will flash (progress at bottom), once it's done you can flash another or go back to the main menu and reboot!
Great write up. This should be sticked instead of the tutorials that are already there.
I'm having trouble getting rid of the persistent wifi notification, i have successfully achieve root, and flashed cwm. I go to edit record and the value is already a "0". any idea whats up here? i flashed one of those ui customizations you linked too if that matters.
That Baker Guy said:
I'm having trouble getting rid of the persistent wifi notification, i have successfully achieve root, and flashed cwm. I go to edit record and the value is already a "0". any idea whats up here? i flashed one of those ui customizations you linked too if that matters.
Click to expand...
Click to collapse
One of the toggle customizations shouldn't bother it. There are 2 records to edit though, did you make both 0?
Relayed from the moon to xda via my handheld beam machine!
Nice job on the guide!
eMpTy43 said:
One of the toggle customizations shouldn't bother it. There are 2 records to edit though, did you make both 0?
Relayed from the moon to xda via my handheld beam machine!
Click to expand...
Click to collapse
wow, im dumb, i only saw the first record that needed editing, thanks for pointing that out
That Baker Guy said:
wow, im dumb, i only saw the first record that needed editing, thanks for pointing that out
Click to expand...
Click to collapse
No prob! Glad you got it going!
Relayed from the moon to xda via my handheld beam machine!
Been wanting to root my phone but have been too busy to do the research. I might take the plunge now, thanks to your guide. Sounds pretty straightforward.
Sent from my Xoom using xda premium
nattygirl said:
Been wanting to root my phone but have been too busy to do the research. I might take the plunge now, thanks to your guide. Sounds pretty straightforward.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
Go for it! If you have any questions just reply on the thread. I've got my notifications on.
Relayed from the moon to xda via my handheld beam machine!
Thanks Man!!! You made it easy breezy.
Surprised this hasn't been stickied yet!
Sent from my Cocaine White S3.
lol im the guy who hates to read more of the visual guy, found a youtube video on how to root the phone after rooting what else should i do in order to gain complete access
eMpTy43 said:
Go for it! If you have any questions just reply on the thread. I've got my notifications on.
Relayed from the moon to xda via my handheld beam machine!
Click to expand...
Click to collapse
Just rooted!!!! Couldn't be any easier!!! Now time to start flashing!!!
---------- Post added at 08:52 AM ---------- Previous post was at 08:08 AM ----------
HELP!!!!
Followed this to a "T". Everything went smoothly and appeared successful until I flashed a rom. I flashed Jellybean CM10 for VZW. Now all I get is a screen that says "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help.".
I tried booting into recovery manually so I could do restore my backup, but i can't even get back into it. It just keeps taking me to this screen.
Followed the guide to return to stock using odin and repeated all of these steps.... i'm back in business now.... phew!!!!
This is Noxous Ninjas root Tool! its pretty obvious when it says "Noxious Ninja" at the top of the program. Download both versions and compare them.
http://forum.xda-developers.com/showthread.php?t=1792342
This guide is the best I've read yet!
I've been casually reading these forums for over two years and still haven't decided to lose my rooting virginity, probably because every guide always seems so damn confusing. This looks nice and simple.
3 questions:
1- If I'm not going to be putting on a custom ROM yet, do I need to continue and install CWM right away? Can I just wait and do it when I finally take the next step? (I really just want to root to get rid of some bloat for right now. I know I'll last a day though where I start wanting to use mods and tweaks though, will I need to install CWM for that?)
2- Can I just ODIN back to stock instead of bothering with a Nandroid backup? I keep nothing on my phone that I feel is of importance for backing up. Everythings in the cloud.
3- When I go to flash my first ROM, does it need to be on the internal SD or on the external SD card (I have a jillion laying around, but they are only 2GB a piece)?
Thanks!
droidstyle said:
This is Noxous Ninjas root Tool! its pretty obvious when it says "Noxious Ninja" at the top of the program. Download both versions and compare them.
http://forum.xda-developers.com/showthread.php?t=1792342
Click to expand...
Click to collapse
I'll put credits in my OP. Didn't mean to imply that was my work at all! That was just the most straight forward and one-click program I'd found to root the S3.
bbeelzebub said:
This guide is the best I've read yet!
I've been casually reading these forums for over two years and still haven't decided to lose my rooting virginity, probably because every guide always seems so damn confusing. This looks nice and simple.
Thank you
Click to expand...
Click to collapse
bbeelzebub said:
1- If I'm not going to be putting on a custom ROM yet, do I need to continue and install CWM right away? Can I just wait and do it when I finally take the next step? (I really just want to root to get rid of some bloat for right now. I know I'll last a day though where I start wanting to use mods and tweaks though, will I need to install CWM for that?)
Click to expand...
Click to collapse
Even if you don't flash a custom ROM or custom .zip update a backup is nice to have in case you make one little tweak that breaks something. Eliminates the hassle of having to flash back to stock and start from scratch again.
bbeelzebub said:
2- Can I just ODIN back to stock instead of bothering with a Nandroid backup? I keep nothing on my phone that I feel is of importance for backing up. Everythings in the cloud.
Click to expand...
Click to collapse
You sure can. Keep in mind ODIN flashing does have a higher risk than a Nandroid backup. You simply cannot perma-brick your phone if there is no cable plugged into it.
bbeelzebub said:
3- When I go to flash my first ROM, does it need to be on the internal SD or on the external SD card (I have a jillion laying around, but they are only 2GB a piece)?
Click to expand...
Click to collapse
Having either a full ROM or a .zip update ROM flash on the external SD is the best scenario. Part of a nice clean install is to make sure a factory reset was done (which wipes the internal SD). If your ROM is on the internal SD... well you know the rest lol
Thanks! Just want to make sure folks are properly credited for thier work...and again nice guide!
i have been stuck on the odin downloading screen and command prompt is still looking for device to be detected. i waited till it installed the driver now what ?
prztruspaz said:
i have been stuck on the odin downloading screen and command prompt is still looking for device to be detected. i waited till it installed the driver now what ?
Click to expand...
Click to collapse
This guide doesn't use download mode. Reset your phone and start from the top.
Relayed from the moon to xda via my handheld beam machine!
Can I root Huawei U8812D? pls someone advice me.
babbird said:
Can I root Huawei U8812D? pls someone advice me.
Click to expand...
Click to collapse
I am a new user so I cannot post a links yet but google your phone and there should be a link to ANDROID net forum. There you will find a video showing you how to do it.
found something on chinese site that looks good
babbird said:
Can I root Huawei U8812D? pls someone advice me.
Click to expand...
Click to collapse
This looks really rough, but apparantly there is a boot.img, then other cracking tools can be used.
I'd love to try it, but... well... my chinese is limited to google-translate.
The URL won't post so this is a big hint:
products . mobileuncle . com / thread-202642-1-1 . html
I think I got it root on g302d u8812d
j_chytown said:
This looks really rough, but apparantly there is a boot.img, then other cracking tools can be used.
I'd love to try it, but... well... my chinese is limited to google-translate.
The URL won't post so this is a big hint:
products . mobileuncle . com / thread-202642-1-1 . html
Click to expand...
Click to collapse
Currently on that URL is a approx 14 MB rar file download, I _think_ I just got it sorted!
I don't have time now to make this pretty, but some others who want to hack. add links, etc feel free to work with this...
in fact I dont know if all these steps are required.
General Broad steps (ymmv, you are doing this to your own dang phone, dont blame me for bricks viruses or earthquakes etc, etc/ etc).
on your computer, uninstall adb, pdanet and any other tools that use the adb drivers and dlls, reboot as needed.
install the mt6575 drivers (I forgot whether I downloaded these or if they were part of the 14 meg file) reboot as needed
power down phone.
remove battery from phone, don't plug into computer.
launch flash_tool.exe
load the included scatterloading file MT6575...emmc.txt
press the download button
plug in phone to usb
put battery in phone
watch the blinkinlights for a few seconds, wait for the big green O
then I disconnect phone and ensure power down.
install SDK
power up phone and plug in
test adb (adb shell)
kill adb server
download and install superoneclick
download extra superoneclick exploits
launch superoneclick
click the big root button.
Test (you can use something like rom manager)
Now people should be able to try to install various CWMs.
I haven't gotten that far yet.
CWM for u8812d g302d ?
j_chytown said:
Currently on that URL is a approx 14 MB rar file download, I _think_ I just got it sorted!
I don't have time now to make this pretty, but some others who want to hack. add links, etc feel free to work with this...
in fact I dont know if all these steps are required.
General Broad steps (ymmv, you are doing this to your own dang phone, dont blame me for bricks viruses or earthquakes etc, etc/ etc).
on your computer, uninstall adb, pdanet and any other tools that use the adb drivers and dlls, reboot as needed.
install the mt6575 drivers (I forgot whether I downloaded these or if they were part of the 14 meg file) reboot as needed
power down phone.
remove battery from phone, don't plug into computer.
launch flash_tool.exe
load the included scatterloading file MT6575...emmc.txt
press the download button
plug in phone to usb
put battery in phone
watch the blinkinlights for a few seconds, wait for the big green O
then I disconnect phone and ensure power down.
install SDK
power up phone and plug in
test adb (adb shell)
kill adb server
download and install superoneclick
download extra superoneclick exploits
launch superoneclick
click the big root button.
Test (you can use something like rom manager)
Now people should be able to try to install various CWMs.
I haven't gotten that far yet.
Click to expand...
Click to collapse
Okay I may have found a working CWM clockworkmod recovery, but I don't have access to the chinese site, so others out there may be able to download it and try it out.
mm-mpxteam . net / forum . php ? mod = viewthread & tid = 4203
or maybe this one:
products . mobileuncle . com / thread-203098-1-1 . html
got the uncles recovery on the phone!
j_chytown said:
Okay I may have found a working CWM clockworkmod recovery, but I don't have access to the chinese site, so others out there may be able to download it and try it out.
mm-mpxteam . net / forum . php ? mod = viewthread & tid = 4203
or maybe this one:
products . mobileuncle . com / thread-203098-1-1 . html
Click to expand...
Click to collapse
it isn't clockwork, but I got a mobileuncle recovery on the phone. Is kinda fun to try to translate!
pan . baidu . com / share / link ? shareid = 63706 & uk = 2483368669
---------- Post added at 06:39 PM ---------- Previous post was at 06:25 PM ----------
j_chytown said:
it isn't clockwork, but I got a mobileuncle recovery on the phone. Is kinda fun to try to translate!
pan . baidu . com / share / link ? shareid = 63706 & uk = 2483368669
Click to expand...
Click to collapse
installed gapps 20110828 (via mobileuncle recovery) and I now have a market that doesn't force-close!
still getting "partners" to force close, but a lot of other stuff is working.
Great work!!! I'll try this on my phone or wait until is working?
Are the recovery and rom in chinese?
Thank a lot for testing.
working well
hiosin said:
Great work!!! I'll try this on my phone or wait until is working?
Are the recovery and rom in chinese?
Thank a lot for testing.
Click to expand...
Click to collapse
It is working very well.
No need for you or anyone to wait.
Just please know what you are doing (do you have basic understanding of recovery mode, roms, factory mode, and the dangers) in other words, if this is your first time doing this on a phone.. ask someone who knows what they are doing for help because I am not able to put together a documented procedure, but the findings above should allow someone else to do that. Additionally, I have no idea of the legality or safety of the software at URLs above.
conceptually this is 4 steps
1) flash boot.img that will allow cracking
2) crack to get SU installed
3) install Mobile Uncle Recovery mode and app
4) install gapps.
The MobileUncle recovery mode is Chinese, But the mobileuncle app is kinda like rom manager, it lets you set up what happens at next boot so you don't need to read the chinese in recovery text mode.
The patched rom is working for me in English with root, no detectable problem except FC on google partners (and I can't tell if that actually does anything). Remember this is not a new rom, just a patch to the huawei rom that allows a root crack.
There are about 4 chinese apps that I am afraid to uninstall..
one appears to be a chinese app store too, kinda fun to browse
gapps must be flashed with mobileuncle recovery (don't just unzip them)
US google play store is working.
I am fully migrated to this phone now and use it for daily work.
Good luck, and remember that this is why you got an android instead of a i-Thing.
Thanks thanks again. I'll try it and don't worry this is not the first time to modify a mobile. If it is all ok i posted here.
Working u8812d
Ok... It was successfully working on my phone. I have root and change recovery and then installing gapps. Almost of the apps is working of the play store. Thanks again and hope there is a release of ICS or JB rom for our phones.
See ya!!!:good:
j_chytown said:
It is working very well.
No need for you or anyone to wait.
Just please know what you are doing (do you have basic understanding of recovery mode, roms, factory mode, and the dangers) in other words, if this is your first time doing this on a phone.. ask someone who knows what they are doing for help because I am not able to put together a documented procedure, but the findings above should allow someone else to do that. Additionally, I have no idea of the legality or safety of the software at URLs above.
conceptually this is 4 steps
1) flash boot.img that will allow cracking
2) crack to get SU installed
3) install Mobile Uncle Recovery mode and app
4) install gapps.
The MobileUncle recovery mode is Chinese, But the mobileuncle app is kinda like rom manager, it lets you set up what happens at next boot so you don't need to read the chinese in recovery text mode.
The patched rom is working for me in English with root, no detectable problem except FC on google partners (and I can't tell if that actually does anything). Remember this is not a new rom, just a patch to the huawei rom that allows a root crack.
There are about 4 chinese apps that I am afraid to uninstall..
one appears to be a chinese app store too, kinda fun to browse
gapps must be flashed with mobileuncle recovery (don't just unzip them)
US google play store is working.
I am fully migrated to this phone now and use it for daily work.
Good luck, and remember that this is why you got an android instead of a i-Thing.
Click to expand...
Click to collapse
This does not work for my u8812d, gives an error using flash tool
Still not rooting
j_chytown said:
Currently on that URL is a approx 14 MB rar file download, I _think_ I just got it sorted!
I don't have time now to make this pretty, but some others who want to hack. add links, etc feel free to work with this...
in fact I dont know if all these steps are required.
General Broad steps (ymmv, you are doing this to your own dang phone, dont blame me for bricks viruses or earthquakes etc, etc/ etc).
on your computer, uninstall adb, pdanet and any other tools that use the adb drivers and dlls, reboot as needed.
install the mt6575 drivers (I forgot whether I downloaded these or if they were part of the 14 meg file) reboot as needed
power down phone.
remove battery from phone, don't plug into computer.
launch flash_tool.exe
load the included scatterloading file MT6575...emmc.txt
press the download button
plug in phone to usb
put battery in phone
watch the blinkinlights for a few seconds, wait for the big green O
then I disconnect phone and ensure power down.
install SDK
power up phone and plug in
test adb (adb shell)
kill adb server
download and install superoneclick
download extra superoneclick exploits
launch superoneclick
click the big root button.
Test (you can use something like rom manager)
Now people should be able to try to install various CWMs.
I haven't gotten that far yet.
Click to expand...
Click to collapse
Thanks for the steps though the problems are still coming thick and fast, I have a new U8812D from China, no China unicom splashscreen but lots of 'bloatware' still. I've been trying for days to root this thing and nothing's working.
I'm pretty sure I need root access becasue the phone is currently preventing me from adding my Gmail account and using the google play market and apps, other bits and pieces like assigning incoming call number to a contact are supposedly fixed by getting the google thing right. The phone is good but I'm missing alot of functionality.
If the above description sounds like rooting is not the solution, please let me know and point me to the right forum, if rooting is the obviously the only way out, I'm hoping to clarify a few step in the above walkthrough to help me and others.
1. I cant install the mt6575 MediaTek drivers, installing directly gives error 'driver cannot be installed this way' there is no COM-LPT port in my device manager to attach it to as a manually locate driver, I can add a COM port with add remove hardware but I have Code 10 error, device cannot start and doesnt seem to accept the mt6575 driver as an update even when forced to it with locate new driver, apparently this is no problem from other forums, still bugging me. Maybe I havent the right files? how do i get COM-LPT ports to show up properly?
2. when 'install m6575 drivers ... reboot' is the phone plugged in? to what device do we install the drivers or should it be automatic?
3. launch flash tool, i have located two versions of the MT6575...emmc.txt file, one delivers error, block count fail and has no files paths for the item in the main table, the other refuses to open, giving error, incorrect scatter file format. The latter has considerably more data in it when read in notepad.
4. Becasue of these errors, SP flash tool does not download to phone. all subsequent steps fail.
Assuming the initial flashing steps are successful, I must to use SuperOneClick to root the phone, where do I find the extra exploits needed? or are tehy automoatically sourced by SOC? Succeeding the root access step, I assume i can freeze the apps causing problems to my google sign in or delete them. Or could I please be directed to the ATTPlain rom mentionned by JohnnyParanoia in 'Almost All Huawei Stock Roms (Firmware) - Updated 28/06/12' board.
Since so many of the resource files I've trawled through are bung, anyone who can point me to reliable/tested files known to work with the U8812d I'd greatly appreciate in on top of the great appreciation I already have for your patience with a Noob. I located the 14Mbit .rar file mentioned above but not all parts worked, had to dl the different programs individually and some files had to hunt down form fileshare sites.
Lastly, i am using an HP laptop, Windows 7 64-bit, Thanks in advance.
Michael