Related
Hey peeps,
Here's a nice way of saving about 5 megs of memory without loosing functionality, and gaining much more configuration freedom to your hearts content.
The HTC Touch has a service running in the background that controls finger-friendly kinetic scrolling and launches the Cube when you swipe up from the bottom. The biggest memory hogger of this process is the Cube itself that once it's launched stays in memory and eats about 5 megs of precious RAM.
Stopping the Cube from launching is easy enough but you will also loose functionality this way that you may not want to do without so I was looking for some alternatives.
Alternative 1:
I tried fTouchFlo (available on this forum somewhere), a gestures based application launcher, but found it takes up about 1.2 megs of RAM just for the launcher (you won't use the fTouchFlo scrolling on a Touch) and does not react entirely the way I want it to, ie. I only want it to detect gestures when I start swiping away from a screen edge, not when the swipe starts in the middle of the screen. I also have not found a way to completely remove the service that controls the Cube launch (think this would also kill finger scrolling) so fTouchFlo just eats more RAM then I would like it to on a HTC Touch that has the basic gesture functionality built-in already anyway.
Alternative 2:
I also looked long and hard for a finger friendly task manager but to no avail, until I discovered MortButtons. Not only does this tool contain the only finger-friendly task manager around, it's main features also allows it to be an excellent and easy to configure Cube alternative. Combine this with the default gesture based Cube launcher in the HTC Touch and you save a big chunk of RAM without loosing functionality!
So here's how it goes:
Download VJBrisk from
http://www.vijay555.com/?Releases:VJVolubilis
GSFinder (may also work with TotalCommander but I haven't tried) from
http://www.google.de/search?q=gsfinder
MortButtons from
http://www.sto-helit.de/
Install the tools:
- Install GSFinder (you could also use TotalCommander if you prefer)
- Install MortButtons and play a bit with the options and configuration
For the next steps I will assume that you have made yourself familiar with the above tools already. These steps described are for Windows Mobile 6 and above, yet they may also work for WM5 (here the Biotouch startup link is located in \Windows\Startup if I am not mistaken):
- Using GSFinder go into the View|Options... menu, uncheck all checkboxes in the Hide section
- Browse to \Windows and find LaunchStartupApp.lst (could also be called StartupApp on some OS versions), copy this in some other folder and open it on your desktop PC in notepad. My version looks like this:
Code:
#\Windows\WiFiInit.exe#
#\windows\startkey.exe#
#\Windows\StartUPBioTouch.exe#
Delete the line with StartUPBioTouch.exe and save, then copy back to your Touch
(Note: I deleted all entries and copied back an empty file, am not missing anthing, WiFi, BT, GPRS, ActiveSync all still works and saved even some extra memory)
- Using GSFinder, copy your new LaunchStartupApp.lst and paste it into \Windows, you will be asked to confirm to overwrite, do so
- Restart your Touch, it will now start without the Cube in memory, DO NOT use the Cube until you finish all steps described here
- Use GSFinder to show the properties of \Windows\Biotouch.exe, remove the read only check
- Create a shortcut to \Program Files\MortButtons\MBRunner.exe (or wherever you installed it) and rename it to VJTarget.lnk
- Edit the shortcut (with GSFinder or use notepad on your computer) and change it as such:
Code:
41#"\Program Files\MortButtons\MBRunner.exe" "\Program Files\MortButtons\Button1.mbi"
- Run the shortcut by clicking on it, Mortbuttons should start, if it didn't than you need to double-check the shortcut and make sure it points to MBRunner.exe and has the correct path to Button1.mbi
- Put the shortcut into \Windows
- Now, using GSFinder, browse to where you have stored VJBrisk.exe, rename it to Biotouch.exe and copy and past it into \Windows, you will be asked to overwrite, choose Yes.
That's it. Now, swipe up, like you would when starting the Cube et voila, instead of the Cube you now get Mortbuttons, fully configurable with loads of animations and gesture shortcuts to choose from.
I have shortcuts on my home screen for most of the applications the Cube has (Internet, Music, Photos, Communication etc) so I never really needed the Cube except for the quick-dial contacts page and communications manager. So, I have set up MortButtons to show a list of contacts with pictures (this is just as easy to configure with MB as with the Cube quick-dial) on Button1.mbi, then when I swipe to the left it switches to TaskList.mbi (fantastic finger-friendly big button task manager included with MB). I've set up the gestures to exit MB when I swipe down, just like the Cube does. MB is fully skinnable even allows a transparent background, can do transition animations between the panels etc. Up to 5 button pages + task manager can be configured by default but you can always add more.
Have fun with this!
Cheers and special thanks to Mort for MB!
Sndance
Ps: the more pages you have in MB, the more memory it will take up, 2 pages eats up about 500kb (the Cube used almost 6 Megs remember ) but you can also set it so it does not stay in memory after closing (MortButtons, not the Cube).
PPS: attached MortButtons (check Morts site for newer releases), GSFinder, and all files to copy into \Windows (includes VJBrisk already renamed to Biotouch, a shortcut to MB installed on the device - not storage card - and an empty LaunchStartupApp.lst)
PPS: screenshots attached, if you are wondering what is on my Today screen: Ultimate Launch (www.ultimatelaunch.de) and RLToday (www.rotlaus-software.de) for iLook buttons and functionality. These give me the freedom not to have to use the Cube and offers tons of functionality. psnap000.jpg is the Today screen, swipe to the left gives me psnap001.jpg (settings and such) and swipe to the right psnap002.jpg (calendar+)
This is very usefull...
Could you upload your Mortbutton's file?
Many thanks....
sndance said:
(the Cube used almost 6 Megs remember ) but you can also set it so it does not stay in memory after closing.
Click to expand...
Click to collapse
Hi sndance
How would this be accomplished? What needs to be done?
Outstanding, this is a dream!!!
absorber786 said:
Hi sndance
How would this be accomplished? What needs to be done?
Click to expand...
Click to collapse
Just to make sure there is no misunderstanding, I was referring to MortButtons staying in RAM, not the Cube which would not be used anymore if you follow my steps.
To do this for MortButtons:
- Start "MortButtons Setup"
- Choose the "Extended" item from the menu
- Uncheck "Stay in memory"
This will prevent MortButtons from staying in RAM, for me this means only about 500kb difference so I mostly leave it in RAM. I only have 1 custom panel and the task manager, if you have more panels loaded then Mort may use more RAM. Check with a Task Manager (eg. the new Task Manager included with WM 6.1) that shows the individual processes and check for MortButtons.exe to see how much RAM MB is using.
Cheers
sndance
flaviopac said:
This is very usefull...
Could you upload your Mortbutton's file?
Many thanks....
Click to expand...
Click to collapse
I'm not sure where the configurations for gestures and behaviour are stored so I cannot upload anything sorry. But here is how I've configured mine:
1/ Run MortButtons Setup
2/ Choose "Handling" from the menu, enable "Finger Gestures"
3/ Click "Configure Gestures"
3/1/ Here I set left to "Task list", right "Do nothing", Upwards "Do nothing" and Downwards to "Exit"
3/2/ Press OK and again to go back to the main menu
4/ Choose "Display"
4/1/ here I chose "GreyAquaWide" from the Skin dropdown, Entry Size "Big" and "User background" for Display Style pointing to a purely black background.jpg. Further I also checked "Hide menu bar". To max speed I set all transitions (Click "transitions" to enter this menu) to "No transition", you can even choose a cube transition effect here if you like.
4/2/ Press OK to go back to the main menu
5/ Choose "Task List"
5/1/ Here I removed "ActiveSync" from the list and unchecked "Close" and "Close all but current"
5/2/ Press OK to go back
6/ Choose Extended from the main menu
6/1/ Here I unchecked everything except "Stay in memory", speed was first priority for me.
6/2/ Press OK to go back
7/ Finally I built my contacts page, choose "Edit menus" from the main menu
7/1/ Choose MortButton1, select "Set entries" button
7/2/ Click Add
7/3/ Open the contacts folder and choose "Call Contact", press OK
7/4/ Choose your contact from you phone book, press OK
7/5/ Now either it picked up the contact photo from your phone book or you can assign it a different one by clicking Icon
7/6/ Press OK, then Close
8/ You are back in the main menu, Press Exit
Click to expand...
Click to collapse
There is so much more to explore, you can add multiple different items on one button page like contacts and applications together on one page. It is even possible to rotate the screen before launching an application! You can add buttons that link button pages together or use gestures to navigate.
I kept it simple - for now - with just a contacts page upon calling MortButtons when swiping up like I did for the Cube and a following swipe to the left brings up the integrated task manager. A swipe to the bottom and MortButtons dissappears again.
Cheers
sndance
Edit: MortButtons stores the display and handling configuration in the registry, HKCU\Software\Mort\MortButtons, so far MB does not support exporting these settings to a file.
sndance said:
I'm not sure where the configurations for gestures and behaviour are stored so I cannot upload anything sorry. But here is how I've configured mine:
There is so much more to explore, you can add multiple different items on one button page like contacts and applications together on one page. It is even possible to rotate the screen before launching an application! You can add buttons that link button pages together or use gestures to navigate.
I kept it simple - for now - with just a contacts page upon calling MortButtons when swiping up like I did for the Cube and a following swipe to the left brings up the integrated task manager. A swipe to the bottom and MortButtons dissappears again.
Cheers
sndance
Click to expand...
Click to collapse
Many thanks...
I'm going to try it asap....
Added 2 new images showing my contacts page and the task manager at work.
Cheers
sndance
sndance said:
Just to make sure there is no misunderstanding, I was referring to MortButtons staying in RAM, not the Cube which would not be used anymore if you follow my steps.
To do this for MortButtons:
- Start "MortButtons Setup"
- Choose the "Extended" item from the menu
- Uncheck "Stay in memory"
This will prevent MortButtons from staying in RAM, for me this means only about 500kb difference so I mostly leave it in RAM. I only have 1 custom panel and the task manager, if you have more panels loaded then Mort may use more RAM. Check with a Task Manager (eg. the new Task Manager included with WM 6.1) that shows the individual processes and check for MortButtons.exe to see how much RAM MB is using.
Cheers
sndance
Click to expand...
Click to collapse
Hi sndance,
Thanks for clearing that up. I was under the impression this could be done with the cube. It would be really awesome if it could be done though.
At present I am using PointUI, which i am highly impressed with, so i dont think i will be trying out your suggestions, sorry
Regards
Thanks for finding out ow to keep the cube from launching, at startup, first of all.
Haven't looked into MortButtons, as I'm using Ultimatelauncher exclusively so far, but if it's that customizable, I'll give it a shot.
Cheers,
mc
netzcoyote said:
Thanks for finding out ow to keep the cube from launching, at startup, first of all.
Haven't looked into MortButtons, as I'm using Ultimatelauncher exclusively so far, but if it's that customizable, I'll give it a shot.
Cheers,
mc
Click to expand...
Click to collapse
Hey Coyote, if you want to stop the Cube completely, then use a registry editor and go into HKLM/Software/OEM/TFLOSettings and set the value of the "EnableCube" key to 0. If you also followed my steps above to delete Biotouch.exe from the LaunchStartupApp then you will have effectively terminated the Cube.
Setting this key basically tells the TouchFlo service (which also controls the finger-friendly scrolling I believe) not to launch Biotouch.exe when you swipe up, so this will also stop anything else you put in place for Biotouch.exe such as MortButtons in my guide above.
Btw. I use a combination of UltimateLaunch with 3 slideable panels and RLToday a bit like FocalDesign does in his today theme. Mort gives me the added functionality of a fully configurable Cube and - to me, most importantly - a finger friendly launcher and task manager of which I am sure there is no alternative, and it's free also!
Cheers
sndance
Will this work...
...if I'm using spb Mobile Shell to launch apps and quick dials?
davehutch said:
...if I'm using spb Mobile Shell to launch apps and quick dials?
Click to expand...
Click to collapse
I have no experience with spb Mobile Shell, but you could edit the VJTarget.lnk contents to start any kind of application you want instead of the Cube when you swipe up. So if spb Mobile Shell could be started with a shortcut then I guess the answer is yet. Give it a try.
Cheers
sndance
Mm. I don't have either of the entries you mentioned
No StartupApp and no LaunchStartupApp either.
Removed Biotouch from Windows/Startup and rebooted...memory exactly the same as before.
Any suggestions?
davehutch said:
No StartupApp and no LaunchStartupApp either.
Removed Biotouch from Windows/Startup and rebooted...memory exactly the same as before.
Any suggestions?
Click to expand...
Click to collapse
Dave,
Check with a task manager that shows individual processes if biotouch.exe is in there (memmaid or such). It seems like you have a Touch with WM version prior to 6.1? If you removed biotouch from Windows/Startup then after a fresh restart you should not see biotouch in the task manager processes. Mind you, even if biotouch is not started automatically, it will be loaded by the touchflo service the first time you swipe up to bring up the Cube.
Cheers
sndance
Hey Coyote, if you want to stop the Cube completely, then use a registry editor and go into HKLM/Software/OEM/TFLOSettings and set the value of the "EnableCube" key to 0. If you also followed my steps above to delete Biotouch.exe from the LaunchStartupApp then you will have effectively terminated the Cube.
Setting this key basically tells the TouchFlo service (which also controls the finger-friendly scrolling I believe) not to launch Biotouch.exe when you swipe up, so this will also stop anything else you put in place for Biotouch.exe such as MortButtons in my guide above.
Click to expand...
Click to collapse
Thanks, man. I have cleared my LaunchStartupApp.lst so far, like you suggested, and I'm loving every free MB I won Now I wanted to set it up to launch PocketCM insted of the cube when I swipe up and kept rereading your first post on how to do this, until I read this reply. now I remember setting TFLOSettings to 0 weeks ago when I started to try to get rid of the cube. That clears it up, of course.
Btw. I use a combination of UltimateLaunch with 3 slideable panels and RLToday a bit like FocalDesign does in his today theme. Mort gives me the added functionality of a fully configurable Cube and - to me, most importantly - a finger friendly launcher and task manager of which I am sure there is no alternative, and it's free also!
Click to expand...
Click to collapse
I see. I have a very similar setup. I'll definetly look into MortButtons, if only to see what it does, but I use only a small part of features of a WM phone, and I'm looking for ways to set these up for easiest use and smoothest execution. I'm perfectly fine to use things I rarely use through stylus operated menus.
Cheers,
nc
Hi sundance, sounds great. I tried it on my orbit 2 but could not find a LaunchStartupApp.lst nor a StartupApp.lst in \windows folder. There is StartUPBioTouch.exe and .lnk but both in ROM.
What can i do?
ichbins said:
Hi sundance, sounds great. I tried it on my orbit 2 but could not find a LaunchStartupApp.lst nor a StartupApp.lst in \windows folder. There is StartUPBioTouch.exe and .lnk but both in ROM.
What can i do?
Click to expand...
Click to collapse
Servus Ichbins,
The LaunchStartupApp.lst or StartupApp.lst in the Windows folder only apply to Windows Mobile 6 and 6.1. If you have an earlier version, then you should have a link to biotouch.exe in your Windows\Startup folder. Delete this to kill the Biotouch Cube, or edit the link (using GSFinder or on your desktop PC using notepad) and point it to MortButtons to replace it. I.e. put this in the biotouch.lnk instead:
41#"\Program Files\MortButtons\MBRunner.exe" "\Program Files\MortButtons\Button1.mbi"
If there is also not biotouch.lnk or similar in your Windows\Startup folder then I am out of ideas and maybe someone else can share a few words of advise? I am running WM6 and 6.1 for a while now and do not remember the HTC file structure of WM5 sorry.
Grüße
Sundance
.lst file not found
Hi Sndance (oder Sundance?)
Thanks for the ultrafast answer. A have Windows Mobile 6 Pro installed. Touchflow is Version 2.0 Build 29087. Searching for *.lst only gives me customize.lst, hopreject.lst and revoke.lst.
It seems there is no chance for me.
Grüße
ichbins
Finally I figured it out: Deleting the line “21#"\Windows\StartUPBioTouch.exe" in "StartUPBioTouch.lnk"
did it. Works like a charm.
Works like a charm.
Very useful tip, thx sndance!!
HI
When one clicks the Start Menu/button in TF3D, a page with programs will open up instead of the WM start menu drop down.
My question is how does one assign one of the buttons to point to open a folder (eg Games Folder) instead of a program?
Thanks for reading and your help
This might help:
http://forum.xda-developers.com/showpost.php?p=4143871&postcount=9
Thanks
Exactly what I was looking for. All is done manually but it didn't take so much time.
Thanks for your help.....
Will try it out....
Another thing - anyway to turn off the TF3D start menu and reactivate the standard WM dropdown start menu?
Thanks
I am not sure to understand exactly what you want.
If you want to unload tf3d please go in setup => personal => today => then in element unselect TouchFlo3D.
My Rom is in french so I am not sure about the translation. I attached some screenshot : it will be easier
he does not want to disable touchflo3d, when he goes to the touchflo3d startmenu he wants to assign one of the buttons there to open a map(out of the box you can only open programs in the start menu of touchflo3d))
Goondu said:
Another thing - anyway to turn off the TF3D start menu and reactivate the standard WM dropdown start menu?
Thanks
Click to expand...
Click to collapse
Got it figure out...
Look at this thread
Goondu said:
Thanks for your help.....
Will try it out....
Another thing - anyway to turn off the TF3D start menu and reactivate the standard WM dropdown start menu?
Thanks
Click to expand...
Click to collapse
It's easy
- Open your registry editor;
- HKLM - Software - HTC - EnlargeMenu - EnableManilaStartMenu (Change "1" to "0")
- Soft reset...
That's it No need to install any .cab or smthing...
Yes, it will be great if we can have both where Start menu still can be active w/ drop menu and the Windows key button still can be a short cut to program short cut menu.
Anyway to get both of this together since the Diamond2 tf3d menu does not have Program SHORT CUT menu but using the windows start function.
Is there any way to keep the WIndows button as the Program shortcut key & the WIndows Start menu as Drop-down menu.
If I change the value from 1 to 0, the program shortcut function under window button does not work anymore/
Pls help
Here's the topic where u can download the app:
http://forum.xda-developers.com/showthread.php?t=340352
anyway since i'm using WM 6.5, the old nice start menu has been replaced, and i missed having 8 shortcuts simply by pressing start menu. So, a good solution is to use QuickMenu, it lets u use the old WM 6.1 start menu as well as letting u use the WM 6.5 start menu (which is basically just opening the Programs folder, kinda pointless IMO).
So anyway i'm happy with QuickMenu but have trouble finding how to add shortcuts to the list, i fiddled with all the options but can't figure it out. Anyone plz guide me?
It's just like any start menu. Copy shortcuts to \windows\start menu\programs\xxxxx. Total commander is the best tool for the job. Not sure what you mean about the 6.5 start menu only opening up programs. I thought that was what it was supposed to do, lol.
Not sure what you mean about the 6.5 start menu only opening up programs. I thought that was what it was supposed to do, lol.
Click to expand...
Click to collapse
No, what i said was that the WM 6.5 start menu only opens up the Programs folder, instead of showing the drop down start menu with the 7 or 8 program shortcuts where u can launch them straight away.
I.E, the WM 6.1 start menu is just like the start menu on your computer. On WM 6.5, it just opens up the programs folder, there are no drop down menus when you click start.
Anyway i already have shortcuts in the path \windows\start menu\programs, but you have to assign them to QuickMenu, u have to add them to the shortcut list.
This is the same for the start menu on your WM 6.1, you have to go to Settings --> Menu Launch list (something like that) and tick the shortcuts you want to show.
When you select shortcuts for the 6.1 menu in the 'menus' applet, it just moves the shortcuts to \Windows\Start Menu from the Programs sub-folders. The 6.5 start menu shows more than just the program directory; it also shows the Settings directory. I'm pretty sure that it will show any shortcut placed directly in \Windows\Start Menu; I've put things there by accident and they've shown up in the 6.5 start menu. You'll have to do it manually with total commander or something similar. If you get the shortcuts there, they should show both in quick menu and in the 6.5 start menu. You should only be able to put 7 shortcuts there, though.
thx i got it working, ur rite, i just have to copy shortcuts from:
\windows\start menu\programs
to
\windows\start menu
edit:
OK nope it's still not working. For some reason, after 2 or 3 mins, the shortcuts I put in the \windows\start menu folder always get moved to the \windows\start menu\programs folder instead. The shortcuts aren't deleted, they're just moved automatically. I noticed this problem occurs on the WM 6.1 as well.
I've only added 7 shortcuts to the list so it should be fine, i can see the shortcuts on Quick Menu but they just get moved afterwards.....
bump
Same question.
How to make Quickmenu 2.8 work with WM6.5
I miss my shortcuts, the honeycomb sucks.
Just flash dynasty rom; I'm pretty sure that it runs quick menu.
Shortcuts in Quickmenu
Bump!
Has anybody found a solution to this?
I had problems finding a working version of QuickMenu for HD2, so I modified my own .cab a bit. I hope this will help others as well. Im attaching a version for norwegian ROM and also for the WWE.
If anyone want to use it on other languages, the only modification after installation is to change 0409 to your own local code in the files:
Program Files\Qmenu\QMenuCfg.dll.0409.mui
Program Files\Qmenu\QuickMenu.exe.0409.mui
and then in the settings of QuickMenu change the path for your local start menu.
so do we lost the original wm6.5 start menu?
no, the original start menu is stil present if you click on the text "start" instead of the actual start menu icon. you can also choose yourself in the settings whether the start menu hardware key will open Quick Menu, or windows' original start menu =)
This is awesome! Thx
Only issue I don't like is that it removes the built in taskmanager that can be accessed by pressed the top right corner by the battery.
Can't both be present?
Does somebody have a volume buttons problem after installing?
ROM 1.48.405 (and smth.)
Niiiice!
There are a couple of spelling errors in the Quick menu in WWE:
'Execute' rather than 'Excute'
'Options' rather than 'Option'.
Is there a way to show user defined icons rather than the system defaults in the menus as many will have installed a different set?
Great!
It works very, very well with HTC HD2!
Congratulations and thanks a lot!
JC
Thanks, works very well in conjuction with WM 6.5.x (except the interception of the close button)
Very finger friendly when you set the "Menu item edge" to 15 or more.
Thanks for sharing
Ibb1982 said:
Only issue I don't like is that it removes the built in taskmanager that can be accessed by pressed the top right corner by the battery.
Can't both be present?
Click to expand...
Click to collapse
i dont know about this, but why would you need it when this menu got its own task manager, both a list of open programs and a link to "task manager" ? =)
Igr1 said:
Does somebody have a volume buttons problem after installing?
ROM 1.48.405 (and smth.)
Click to expand...
Click to collapse
no problem here...
lawsong said:
Is there a way to show user defined icons rather than the system defaults in the menus as many will have installed a different set?
Click to expand...
Click to collapse
i've been wondering the same myself...
Good Work, Trying now..........
don't work on my french rom hd2
I have a strange caracter in the menus
Ok Work Fine but i need to rename these files:
Program Files\Qmenu\QMenuCfg.dll.0409.mui
Program Files\Qmenu\QuickMenu.exe.0409.mui
to
Program Files\Qmenu\QMenuCfg.dll.040C.mui
Program Files\Qmenu\QuickMenu.exe.040C.mui
Fantastic!
This is great! Thanks! works excellent on my HTC HD2
Works great on my French HD2.
Thank you.
*working* QuickMenu for HD2
hi guys, I've seen several threads on QM for HD2. I've been using a version which I picked up somewhere, and has worked flawlessly for all HD2 ROMs I've tried so far.
I also commented in this thread.
Quote from that thread:
I've been using QM since I saw it in one of nrg28 ROMs. the version I downloaded (no clue where from) behaves differently:
- no action if I tap the battery button, other than notification bar showing
- QM is activated by pressing left-top on taskbar (where previous Start was, now typically black area)
- and, and this is the best part imho, it is activated by a short press on the Windows HW button no need to reprogram long press of Send or End button. brilliant!
Click to expand...
Click to collapse
I attached my version (WWE) so you can try if it works for you. Hope it helps
Very very nice!!!
i am using the origial quickmenu and it seems work fine, what is the diffirrence between the origin and this one?
cranesky said:
i am using the origial quickmenu and it seems work fine, what is the diffirrence between the origin and this one?
Click to expand...
Click to collapse
for me the original had size and placement issues. this is the only version i found out to work on my HD2 after a few small tweaks of the cab
Hi
I just try it on my Hd2 with Greek language. Is working ok but I see no letters
at all. How can I see the letters? how can I do that with the language?
Can you give me some details how to do it since I'm new om WM devices?
Thank you.
I added the files below. mui for the Polish language and complete an application with the Polish language
Excellent app., this is what I need instead of SPB Mobile Shell (worked great on my Touch Diamond 1, but not on the HD2).
Been looking for these features
- Closing apps from the Today screen
- Reboot function
And handy (but less important)
- Starting apps
- Managing connections
Thank you !
is there an programm to change the softkeys in WM6.5?
or does anybody have the links to the programms under windows?
I want a softkey to Phone and one to Contacts.
Search for Advanced Configuration Tool
djg269 said:
Search for Advanced Configuration Tool
Click to expand...
Click to collapse
I have installed this programm, but where can I change both softkeys?
In Adv Conf
Menu-More Settings-Key mapping
You can also do it changing the registry; in HKLM/Software/HTC/Manila you have the keys HomeRSK and HomeLSK; where RSK is Right SoftKey and LSK is Left Softkey.
In HomeRSKPath you put the path to the programm you want to launch, in HomeRSKText you put the text you want to put in the Softkey.
Hope it helps.
What is the way to change the softkeys while Manila is running? Manila overwrites my softkey mapping while its running.
~Eyghon
Please.... use the search function... there are at least 5 threads which are about chaninging the softkeys.
Once you have changed the registry you MUST do a Soft Reset to apply the changes.
FYI I'm using;
Softkeys Control Panel Applet
Here's a direct link;
http://www.dotfred.net/SA/FdcSoft SoftkeyAppletEx.cab
Don't forget to check out the above site for some other awesome free software!
Have fun,
Senax