[Q] how far can you go? - Captivate General

what is the average stable overclock for the captivate?

Average seems to be around 1280 mhz. Some people can do 1.3 but any higher and it can cause problems. I run at 1280 on perception and I have great battery life and performance with no undervolting needed
Sent from my SAMSUNG-SGH-I897 using XDA App

Rockliveson123 said:
Average seems to be around 1280 mhz. Some people can do 1.3 but any higher and it can cause problems. I run at 1280 on perception and I have great battery life and performance with no undervolting needed
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
thanks for letting me know! the idea of a phone running at 1.3ghz is mind boggling for me. there are netbooks that are only at 1.66ghz.
also, my first computer had 128mb of ram and a 1.6ghz p4. this thing has 512mb of ram.

1.3 GHz
I tried 1.4 GHz, and while I thought it to be stable, I would get random freezing.

Hello ghost. In the future could you title your threads appropriately? It is a mess to have the boards full of threads who's titles mean nothing. You could have titled this one (Max stable over clocking level?)

ok. thanks for the feedback.

Related

What should I overclock to?

Running Liquid Thundersense and Drods BFS kernel
Getting surprisingly great battery life at 1.8ghz but im not sure that i need it..
Then lower the clockspeed. Theoretically, the lower the clock speed, the better the battery life.
staveandor said:
Then lower the clockspeed. Theoretically, the lower the clock speed, the better the battery life.
Click to expand...
Click to collapse
i know that, i mean what should i overclock to just get that extra edge or performance? is 1ghz really enough? seems snappier on higher speeds but idk what my limit should be
Honestly, its hard for me to tell that much of a difference between 1.4 and 1.8 ghz besides quadrant scores which I could care less about. Even though 1ghz is plenty fast for this phone I usually keep mine between 1.2 and 1.3 ghz just so I dont sacrifice too much battery life. By the way how do you like liquid thundersense? Ive been meaning to give the newer version a try, but I just havnt gotten around to it yet.
I don't think most people will notice the difference unless the phone is under heavy load. If the battery life is fine at 1.8 and its stable for you I don't think it'll hurt much leaving it there. You can just split the difference between 1 and 1.8 and set its max clock to 1.41. I'm using 1.41 and its fine for me.
Sent from my ADR6400L using Tapatalk
dirtyfingers said:
Honestly, its hard for me to tell that much of a difference between 1.4 and 1.8 ghz besides quadrant scores which I could care less about. Even though 1ghz is plenty fast for this phone I usually keep mine between 1.2 and 1.3 ghz just so I dont sacrifice too much battery life. By the way how do you like liquid thundersense? Ive been meaning to give the newer version a try, but I just havnt gotten around to it yet.
Click to expand...
Click to collapse
The new version is really smooth!!! I love it and thanks man,ill probably over clock it some just for that extra boost
Sent from my ADR6400L using XDA Premium App
WillTheGreat said:
I don't think most people will notice the difference unless the phone is under heavy load. If the battery life is fine at 1.8 and its stable for you I don't think it'll hurt much leaving it there. You can just split the difference between 1 and 1.8 and set its max clock to 1.41. I'm using 1.41 and its fine for me.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
Yeah 1.4 has always been my norm, but 1.8 gives me mixed results with stability ..I know I get the highest mflops with it (not sure if it means any more than quadrant)
Sent from my ADR6400L using XDA Premium App

Setting the CPU to 400Mhz freezes?

I'm having an issue with my phone not being responsive if I set the CPU to 400Mhz. I first found this problem using Juice Defender then I uninstalled that and did it under SetCPU and it still did the same thing. The phone pretty much doesn't wake up after a while. I have to do a reboot in order for it to work again.
Don't get mad at me but IMHO overclocking and messing with a phones core features (what makes it run, processor, ram, etc.) is unsafe and can cause instability. And no I have no scientific research to back this up but it's just my two cents.
Sent from my SGH-I997 using xda premium
Lol I'm not mad. I don't really like to over clock. I just figured under clocking would work better. But nooooo lol
Sent from my SAMSUNG-SGH-I997 using XDA App
It does that under 800 mhz I forget why but I've read that in a couple places
Sent from my SGH-I997 using XDA App
underclocking that much is using less than 1/3rd of your true processor power.
your processor simply is not able to draw enough power to perform its background tasks - even when the phone is idle - when you underclock to such an extreme extent. therefore, it freezes trying to complete these processes.
if you're going to underclock, i'd say that 800 MHz is the lowest you can go if you are expecting your phone to do everything it is supposed to do. although it isn't going to save you THAT much battery life anyway, so you might as well just run it at the stock setting of 1200 MHz.
Focustom said:
Lol I'm not mad. I don't really like to over clock. I just figured under clocking would work better. But nooooo lol
Click to expand...
Click to collapse
I understand LOL. And he's right underclocking honestly doesn't
Save much battery.
Sent from my SGH-I997 using xda premium
There's a known issue with setting CPU profiles to less than 800 MHz. A fix exists but some kernels don't have it.
Many of our Gingerbread kernels fix it, Infusion-GB is one of the few that hasn't pulled in the fix yet. (Although version 1.1 may have pulled it in, haven't checked github lately.)
None of the Froyo kernels have an explicit fix, but I'm not sure if the flaw even applies to our Froyo kernels as the clocking architecture is VERY different.
Hi, Rogers stock 2.3.3
It's using up 60% battery over night. Most likely I should turn off Wi-Fi.
I have underclocked to 100, 200, and 400 and it's stable --- minus the delay/lag at 100 and 200 . Sorry to seem like a troll.
I find that by default this phone either runs at 100mhz or 1200 on average, and 200 400 800 under 10%
Sent from my SAMSUNG-SGH-I997R using XDA App
ierdna said:
Hi, Rogers stock 2.3.3
It's using up 60% battery over night. Most likely I should turn off Wi-Fi.
I have underclocked to 100, 200, and 400 and it's stable --- minus the delay/lag at 100 and 200 . Sorry to seem like a troll.
I find that by default this phone either runs at 100mhz or 1200 on average, and 200 400 800 under 10%
Sent from my SAMSUNG-SGH-I997R using XDA App
Click to expand...
Click to collapse
Bumping from 100 to 1200 is classic ondemand governor behavior.
Also, some people never had problems even without netarchy's sleep patch running the CPU capped to 400 - but others have. I don't think anyone has had a problem with a patched kernel.

OC Max!

Hi Guys I have a Galaxy S 4G I have noticed that max stable overlclock is 1.508Ghz If I bump up to 1.516Ghz It is stable but at watching videos for a long time it crashes, I have noticed that the normal max temp is below 60 C or 55 C, that's stress testing for long time, normal everyday is 41~43 or, I Think It can go higher but I t would need 1500mV or 1600mV core Voltage also to achieve 1.6, 1.7 or 1.8 even 2.0Ghz It takes 1600mV or 1800mV, temps would be 45~47 normal, and above 60~65 on stress testing. But tegrak doesn't support these volatges, It would need to tweak the code. With proper cooling temps can go down to 33 or 30, lets say using the phone in a cool room.
Do you know when are they gonna support higher core voltages(Tegrak OC)?
Do you really need to oc that high?
Sent from my SGH-T959V using xda premium
Exodian said:
Do you really need to oc that high?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
At 1.5 is goood but for proper PC like performance it would be a bit higher.
2.0ghz would beat samsung sgs2
I know anything higher than 2.0Ghz the phone would suffer, I don't know if the main board can support 2.5Ghz or 3.0Ghz. The battery doesn't handle that much power not even 3500mah battery
Mine runs stable and quite cool @ 1.62 and I get 4128 quad score, but I have no need to oc the phone with all the tweaks.
Sent from my SGH-T959V using XDA App
Thanks I'm gonna try out your setup, but that's the highest it can go?
I get a max of 2300+ because I have no tweaks and I am at Stock 2.3.5 UVUKJ3
I really don't see the need for oc other than for playing a REALLY graphical intensive game. For me, I get a better performance boost from the tweaks incorporated into roms than oc. I tried running a 1.5 for a week and I honestly didn't even notice a difference other than less battery life.
Sent from my SGH-T959V using XDA App
icy56 said:
I really don't see the need for oc other than for playing a REALLY graphical intensive game. For me, I get a better performance boost from the tweaks incorporated into roms than oc. I tried running a 1.5 for a week and I honestly didn't even notice a difference other than less battery life.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Well I notice a difference but anything above 2.0 GHz it is nearly impposible, even if it is gotten above that it would not match new dual and quad Core CPU because they have a different architecture but the battery is the first thing that you notice but the things that I do on the phone require much more processing power than stock. Well the highest is 1.6ish that I think the phone has been able to handle. But definitely overclocking the phone will get you up to speed work new games coming out
tichs said:
Hi Guys I have a Galaxy S 4G I have noticed that max stable overlclock is 1.508Ghz If I bump up to 1.516Ghz It is stable but at watching videos for a long time it crashes, I have noticed that the normal max temp is below 60 C or 55 C, that's stress testing for long time, normal everyday is 41~43 or, I Think It can go higher but I t would need 1500mV or 1600mV core Voltage also to achieve 1.6, 1.7 or 1.8 even 2.0Ghz It takes 1600mV or 1800mV, temps would be 45~47 normal, and above 60~65 on stress testing. But tegrak doesn't support these volatges, It would need to tweak the code. With proper cooling temps can go down to 33 or 30, lets say using the phone in a cool room.
Do you know when are they gonna support higher core voltages(Tegrak OC)?
Click to expand...
Click to collapse
When we get source for GB or ics then I can write scripts to tweak the voltages higher for a higher oc, I have been waiting for that lol
Sent from my SGH-T959V using XDA Premium App
shotchacokov said:
Mine runs stable and quite cool @ 1.62 and I get 4128 quad score, but I have no need to oc the phone with all the tweaks.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Your phone runs quite cool?? Mine gets warm to the touch around the speaker after playing angry birds for 20mins

[Q] OC - noob - should I go for it? Risks? Worth it?

Hi.
I a speed freak! If there is something I hate, is lag.
I therefore thought of using a better kernel for my G2x.
As I understand, some kernels can OC the cpu. Wow. That's cool, first of all.
Second - any conclusions about this? Is it safe? Does it really make a difference (i don't game on my G2x)?
THANKS!
Since you obviously don't know how to use the search function, I'll just tell you that it is perfectly safe to install a kernel and constantly run it at 1.5 Gh.
Go buy setcpu from the market to set your processor speed at Max, and leave it there. All the time. No matter what.
Beekersguy said:
Since you obviously don't know how to use the search function, I'll just tell you that it is perfectly safe to install a kernel and constantly run it at 1.5 Gh.
Go buy setcpu from the market to set your processor speed at Max, and leave it there. All the time. No matter what.
Click to expand...
Click to collapse
Haha, good answer..Or you can go and download CPU master for free. =)... But honestly overclocking is not good
There's no real speed difference when overclocking install a custom kernel but don't overclocking it its a waste of battery
Sent from my LG-P999 using XDA App
risks? yes. it kills your battery faster, and battery life will drop. by battery life, i mean the amount of recharge/discharge cycles it normally will allow will drop.
pros? makes your phone much faster. and no its not a placebo. if you bump up your kernel from 1ghz to 1.5ghz, thats obviously a speed increase. how can it not be faster.
Sent from my LG-P999 using xda premium
But also the risk at a constant 1.5 of overheating and burn out of the processor.
if you're a noob and don't know exactly what OC is, don't do that.
it can kill your battery and processor much faster, make you're phone unstable and accidentally overheat and burn out your processor, if you have a constant OC
processor life is worth the wait imo
I oc mine tops 1.2 and its as fast as it needs to be for my needs. I also bump up the minimal speed to about 500-800 cuz our g2x's should never be running that slow even when idle/screen off imo.
Sent from my LG-P999 using xda premium
Just saying setcpu is free on XDA
Sent from my G2X
GTWalling said:
But also the risk at a constant 1.5 of overheating and burn out of the processor.
Click to expand...
Click to collapse
I set my cpu to run at minimum when the temp reaches a certain level. It's never actually happened though...my phone runs real cool at 1.4ghz
Sent from my LG-P999 using xda premium

SetCPU

I know that if you OC/UV incorrectly, it can cause stability issues. But I was wondering does it cause any damage to the phones hardware like battery, etc? And like how can you tell when SETCPU is causing problems?
Sent from my LG-P999 using xda premium
Well if you OC to high numbers your just stressing the cpu more.Knowing when you have issues is simple getting random reboots,phone getting too hot etcc.
It differs for every phone but undervolting -25 for each voltages works well.
Personally I really don't see the point overclocking to high levels like 1.4 ghz etc,Is up to individual I guess.
Sent from my LG-P999 using XDA
daxecutioner24 said:
Well if you OC to high numbers your just stressing the cpu more.Knowing when you have issues is simple getting random reboots,phone getting too hot etcc.
It differs for every phone but undervolting -25 for each voltages works well.
Personally I really don't see the point overclocking to high levels like 1.4 ghz etc,Is up to individual I guess.
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
Yeah I have been wondering what's the point of OC to 1.4? Does it make that big of a difference in the 4g speed? And cpu speed?
Sent from my LG-P999 using xda premium
Honestly, there really is no point other than for benchmarks. I, like mt3g, actually underclock the phone to something like 750-760mhz; it runs beautifully smooth.
Other than that, if you game a lot and want to maximize FPS, then overclocking would do that for you.
Doesn't have anything to do with 4g speed afaik. That's entirely reception.
Yeah 4g is about reception and tmobile simply.
I mean I had single core devices like MT4g ,SGS 4g for the most part on a day to day basis transitions to transitions theres not much diffirence in terms of speed. Now for FPS and a few other games you need that dual core.Point is there"s no need to OC a dual core phone!
Sent from my LG-P999 using XDA
I have had mine OC'd to 1.1 ghz with some undervolts. It is very stable , 10-12 hr battery with medium to heavy use , and ofcourse fast. Took a while to find the best settings.
When I have SetCPU set to 1015 megahertz, that's the same as stock voltage, isn't it?
NekoNyapii said:
When I have SetCPU set to 1015 megahertz, that's the same as stock voltage, isn't it?
Click to expand...
Click to collapse
What does CPU speed have to do with voltage?
theking_13 said:
What does CPU speed have to do with voltage?
Click to expand...
Click to collapse
I meant the same as stock speed.
Sent from my LG-P999 using xda premium
setcpu phone overclocking
Changes you might see are battery life but not that much unless you so how mess with voltage. Like other have said you know it effecting stability when its overheating, shutting down randomly, exiting program randomly.

Categories

Resources