first of thanks for all your help in advance and sorry for my bad grammar, spelling and stupid questions but i'm a noob and foreigner.
so i got my G-tab like 2 days ago and played with the stock TnT rom for awhile and it sucked.
so first did a nandroid backup.
installed CW Recovery v2.5.1.1-bekit-0.8 and
installed CM 6.1.0-Beta4-Harmony and all was good.
on a side note: i noticed that when i tried to Wipe Dalvik Cache that i get the error message:
E : Can't mount /dev/block/mmcblk0p2
(read somewhere that rePartitioning would fix that )
and so i RePartitiond my SD card. Big mistake because now my Nandroid Backup with the stock TnT rom is gone. oh sh.. i think to my self, but i still have a backup on my Mac so i tried to mound G-tab to Mac doesn't work anymore
so here i am now stuck on CM6.1.0-Beta4-
no g-apps no gmail no market no nothing and i can't find anything on how to install them without using a PC or mac.
i downloaded a TnT vanilla stock rom but i cant get it to work.
and i would really like to try the TnT light rom too.
my question is how can i mount my g-Tab to PC/Mac. or how can i install roms directly from my G-tab using CW Recovery? use too be able to just flash it but that doesn't work anymore
or can i just download a TnT rom nandroid backup zip file and then install it?
so thanks for all you help and sorry for my stupidity anything would help
Related
Hi together,
today I installed a new ROM on my Desire HD. But now it does not boot anymore, there is just the HTC-Logo and then it hangs - I have to remove the batterie to turn off the device.
So, what happened?
Yesterday I installed the Nightly-Release on the Cyanogenmod end everything worked fine. But because of a few things I wanted to get my old ROM, so I used the ROM-Manager to reinstall my Backup.
But that didn't work - the system doesn't boot...
After a bit research I found the ODIN-Tool - is that the right way to repair it?
Greets
Jo
I had the same issue this morning when changing rom to a cyanmod nightly edition. I had error messages so I though that I would go for Evolution HD rom that I had working before. When adding that rom again It hanged on the HTC logo. What I did was to do a factory reset and then I used another rom that I had lying on the SD card and installed from zip. Might not be as easy for you if you dont have different roms on your SD card like me, but thats what I did. Dont know anything about the tool you got there sorry :/ Wish you the best of lyck finding an answer here.
Cheers!
Simon
Hey Simon, thanks for your reply.
Actually I tried to install the Cyanogenmod Stable release, fresh downloadet from the Website.
I am able to start the ClockWorkRecovery (Version 3), so I have the possibility to access the SD Card.
But nothing changed with the new ROM installed.
Got it! I used the current version of the LeeDroid. This ROM runs and now I can use my ROM Manager to install another ROM.
Thanks for your support.
Edit: I had problems installing my Cyanogenmod--Backup. Fixed it with installing LeeDroid, downgraded my Clockwork-Recovery to 2.5.1.3 and formatted my SD-Card. After resetting all data in the recovery menu I was able to install my Backup.
iuvabo said:
Got it! I used the current version of the LeeDroid. This ROM runs and now I can use my ROM Manager to install another ROM.
Thanks for your support.
Edit: I had problems installing my Cyanogenmod--Backup. Fixed it with installing LeeDroid, downgraded my Clockwork-Recovery to 2.5.1.3 and formatted my SD-Card. After resetting all data in the recovery menu I was able to install my Backup.
Click to expand...
Click to collapse
Hi,
Im also having a problem with restoring my (stock) rom. It doesnt boot when i restore it. But you say you have to format your sd Card? My restore file is on the sd-card so it will be gone wright? So what to do?
TY in advance
Gr Js
Hi guys I really hope someone can help me with this. I was running CM7 Nightly rom and decided to try and flash eaglesblood 2.3.5 and it flashed ok but the problem is that when I tried restoring my back-up on it I get an clockworkmod recovery error. Any Ideas?
what does the error say?
most likely it was a bad backup and slim chance of restoration
did u do a full wipe before restoring?
Yes I did a full wipe before flashing and also before I tried to restore my black-up thru rom manager.I have flashed plenty of roms and this phone am not a total noob when it comes to this phone. I have never encountered this problem before. Before i tried going into recovery thru rom manager to restore back up thru CWm 4.0 etc, and it says I need CWM 5.0. I updated the rom manager to 5.0 etc and when I reboot and go into recovery (not thru rom Manager) and it says that it is the 4.0 etc version.Also is the 5.0 etc version blue? it jumps from 4.0 to 5.0 back to 4.0. This is a lil weird I went into recovery and did a restore from there and when I try in RM it comes up with error message Cannot restore cuz my CWm is 4.0 etc. thats when it jumps back from 5.0 to 4.0. I know this is confusing and by the way all the etcs you see are because I don't know the exact version. Any helps and thnx to whomever does.
deder21 said:
Yes I did a full wipe before flashing and also before I tried to restore my black-up thru rom manager.I have flashed plenty of roms and this phone am not a total noob when it comes to this phone. I have never encountered this problem before. Before i tried going into recovery thru rom manager to restore back up thru CWm 4.0 etc, and it says I need CWM 5.0. I updated the rom manager to 5.0 etc and when I reboot and go into recovery (not thru rom Manager) and it says that it is the 4.0 etc version.Also is the 5.0 etc version blue? it jumps from 4.0 to 5.0 back to 4.0. This is a lil weird I went into recovery and did a restore from there and when I try in RM it comes up with error message Cannot restore cuz my CWm is 4.0 etc. thats when it jumps back from 5.0 to 4.0. I know this is confusing and by the way all the etcs you see are because I don't know the exact version. Any helps and thnx to whomever does.
Click to expand...
Click to collapse
You need to update thru NVFlash. Here is the link and everything should be fine after that. http://forum.xda-developers.com/showthread.php?t=1054492
Thanks guys u rock. I got the new CWM on there for nvflash. Now I am moving my saved back up zipped file from downloads to CWM on sd card after I zip it, so well see how this goes right now. THanks again
With the G2X don't use rom manager for your backup/restore. Boot directly into the clockworkmod that you installed with nvflash and do the backup/restore from there.
So, I just did a backup of my Glorious Overdose setup using the voodoo recovery it comes with and I got MD5 errors while trying to restore...
Anyone else have this issue?
I never restored from a cwm successfully, I think its not fully functional. Red nor orange... luckily I saved my apps & settings using mybackup
I have also had this problem. if anyone knows why, please let us know. I was able to restore data, but a couple funny things happened. when restoring, i get error restoring boot image or md5 sum mismatch. when restoring data, my phone stuck at restoring android_secure. i pulled the battery and rebooted. luckily that didnt brick my phone.
fiveseven808, did you flash cwm through rom manager? if so, i think that might be the problem. i flashed through rom manager and was having problems backing up/restoring. i went to this thread: forum.xda-developers.com/showthread.php?t=1124453 and downloaded the update.zip file in the first post, saved in my download folder. i then went to the root of my sd card and deleted the update.zip file that was there. i moved the other update.zip from my download folder to the root of my sd card. rebooted into cwm and took a backup no problem.
sidekick_fanatic said:
fiveseven808, did you flash cwm through rom manager? if so, i think that might be the problem. i flashed through rom manager and was having problems backing up/restoring. i went to this thread: forum.xda-developers.com/showthread.php?t=1124453 and downloaded the update.zip file in the first post, saved in my download folder. i then went to the root of my sd card and deleted the update.zip file that was there. i moved the other update.zip from my download folder to the root of my sd card. rebooted into cwm and took a backup no problem.
Click to expand...
Click to collapse
I did! But I was unable to use it... or something really strange happened..
Before Glorious Overdose, I could boot into CWM 3 using the recovery boot method. After Glorious Overdose, I realized I could boot into CWM Voodoo with the three button method getting around the stock recovery, and boot into a VERY broken CWM 4 via ROM manager.
Will your advice fix whatever I did wrong?
I have no idea, but you could try it and see. if it doesnt, your no worse off than you were to start with.
Update: I now know for sure that having the right update.zip file will fix the issue. I had to restore my phone today due to issues caused by unknown sources. I tried to fix the issues before doing a restore, but no luck. so I booted into cwm and hit restore. it worked without a single hitch. So the problem (for me at least) was definitely having the wrong update.zip file.
I have never had this issue, with VooDoo or regular CWM... Bad update.zip sounds like it would be the problem, as you said
i believe the issue is in the update.zip file. when flashing cwm through rom manager, i was unable to properly backup and restore. after switching the update.zip with the one found in the dev thread, i can backup and restore to my hearts content. i am very glad to have fully functional cwm on this device, as i had it on my last phone, the tmobile comet. the comet was my first android device. i was not entirely happy with it, but it gave me enough of a taste of android to figure out i wasnt going back to blackberry. prior to android, the best phone i had ever owned was a blackberry pearl. now, the sk4g is the best phone i have ever had, even better than the blackberry pearl. for me, this keyboard has no parallel, and the setup and ui is nowhere near as tough to get used to as people had been saying it was on the forums. but i digress. cwm is the best alternative to the stock recovery, and its good to have it working on this phone.
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
ihabelnaccash said:
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
Click to expand...
Click to collapse
Hi there,
I recently experienced the same thing, and it was a hassle to fix--but I have got my phone working each time. The downside being that I /had/ to switch over to Odin. Mind you, I am not necessarily experienced with Android, so I can't really say that this is the only way.
At any rate, here's what I did to get it back to normal:
Load up Odin
Put it in download mode -- I assume you know to hold the volume keys and then plug in the USB.
Flash either the ICS leak or the stock 2.3.5 Gingerbread.
You should be back to good. I hope you backed everything up in either Kies or some other resource...else you're in for a hell of a time setting stuff up.
Oh: bad news about the 2.3.5 stock is that, as far as I can tell, you're unable to upgrade to 2.3.6. In turn, you're then unable to update to the official ICS through Kies or OTA. I assume you don't mind, considering you're trying to flash a new rom anyway.
Anyway, I do hope there is some bit of clarity on getting CM9 on the Skyrocket. As of now I have still been unable to do it. Just as you, no matter the settings I try, I end up being stuck at that screen. The only difference between your method and mine is that I completely did mine through CWM...nothing through ROM Manager. (Actually, I believe I tried a few differing methods involving the CWM touch and non-touch...followed many different guides but still no good.)
Hope you get it back to a functioning state. If you get CM9 working on the Skyrocket, I'd appreciate you sending a bit of details on how to do so.
EDIT: I am now on CM9. Through magic, ponies and friendship I have failed to accomplish this feat. But by pure science and the blood of a pony, I have successfully installed CM9.
After you've restored to 2.3.5 or the ICS leak (the one I was on), do the following:
- Grab the recovery-clockwork-touch U27 described below. Flash it.
- Download both the newest CM9 build from their website, as well as Google Apps, and then copy those to your external SD.
- Follow this guide: http://www.teamchopsticks.org/p/install-guide.html. Here's what's relevant to you:
Wipe data/factory reset.
Format /system (mounts and storage->format /system).
Install the CM9 zip from SD card.
Install the gapps zip from SD card.
ONLY IF YOU ARE ON TOUCH CWM RECOVERY: Format /cache (mounts and storage->format /cache)
Reboot. Let it sit for a few minutes after the first boot. Be patient.\
Click to expand...
Click to collapse
After ~10 minutes you should be fine. Mine took less, but I'd bet it could take longer. Please follow those directions above EXACTLY. I'll be happy to help you in any way I can if you reply to this thread/ send me a PM.
When I softbricked with the latest CWM I wasn't able to return back since it wouldnt detect my SDcard so I just loaded up odin and used recovery-clockwork-touch-5.8.1.3-hercules.tar and was able to read my SDcard again which had all my backups and CM9 files. I have flashed every version of CM9 every since and still using this CWM version and havent had any problems. :good:
All better now- I used ODIN to restore to stock, then used it again to put CWM (non-touch) back on, then added superuser, then just did a restore from SDcard! Muchas Gracias all!
Should I be able to then use a restore of when I had a working CM9 (and backed up with CWM)? Or would I have to do all the cache wiping/ factory reset like I did to install it the first time before using such a recovery? (and I will try that recovery- clockwork touch hercules... latrer tonight from home)
ODIN tar to restore back to factory. I got the boot loop too. Only until after I flashed CM9 then flashed dark side wipe cache only would CM9 work for me. Only on regular CWM though. Try and give that a go.
Sent from my SAMSUNG-SGH-I727
Every time I try to flash something my tablet fails, and I have to revert back my backup. It doesn't matter if I download on PC or from the tablet itself. HELP!!!!
Galaxy Tab 2 7.0
Can you post what rom you are using right now, as well as what recovery version.
Also, what rom are you trying to flash ? You are rooted, right ?
If you can post some more details - am sure people will chime in
Good luck,
bill_in_mtl said:
Can you post what rom you are using right now, as well as what recovery version.
Also, what rom are you trying to flash ? You are rooted, right ?
If you can post some more details - am sure people will chime in
Good luck,
Click to expand...
Click to collapse
I'm running stock 4.0.4, Rooted, Clockworkmod recovery. I have tried to flash several different roms. Romswell, AOKP, CM nightlies thru ROM manager. all of them fail in recovery. I flash stuff all the time on my SIII so I'm not really a Noob to flashing and what not, but I can't figure this one out. Thanks for any help.
What are you using for recovery? When you say failed what is the error message? Sounds like you should prolly reflash a current official recovery. If by failing you mean it hangs on first boot then your not wiping system before flashing. Factory reset and wipe system before you flash.
Are you by chance running any scripts for sd card swap, etc ?
I am running this script, http://forum.xda-developers.com/showthread.php?t=1961097 which swaps my 32GB external sd for the internal sd, which runs great - no issues, except with rom manager and flashing from recovery.
I have to go back and de-activate the script, reboot, and then dowload - or transfer file from PC, and it flashes without issue
Otherwise, I have had no flashing issues of any kind - using CWM 6.0.1.5 for the p3113
Good luck,
Bill