[Q] No Voice Dialing Elegancia ROM HTC HD2 T-Mobile - General Questions and Answers

Bought this phone on Ebay and now find it has custom ROM(Elegancia 3.0; WD 6.5) and according to T-Mobile the voice dialing feature no longer exists on the phone. Does someone know a fix for this very important phone feature? When green button held down diagnostic opens to say: ".. file cannot be opened.. either not signed by trusted.. or a component can't be found..try reinstalling or restoring file." I have no ideas and no software came with the phone. Please help!!
Will try to return it to seller if there is no easy voice dialing fix for me. Thanks,

Related

Voice Dialling

Hi guys
After a hard reset i lost my software "Voice Dialling"
Does anybody knows how to recover/get the software back in my phone??
Pleas help
Irek
Which one Voice Dialling? VITO ???? did u backup your PPC-alldata? if yes ? you can lost only your voice-tag data ? before HR backup your voice tag to STcard
I do not know the name of the program, I did not back it up. It came pre-installed in the device.
I only know when I push the button on the side of the phone the female voice was asking me to say the number I want to dial. And then she would ask is it correct?
That software is now gone and I cant make a voice dialling calls anymore.
Is there any passible way that you could send me this program;
or are the any other way/place where i can get it?
Thank you, Irek
irek4u said:
I do not know the name of the program, I did not back it up. It came pre-installed in the device.
I only know when I push the button on the side of the phone the female voice was asking me to say the number I want to dial. And then she would ask is it correct?
That software is now gone and I cant make a voice dialling calls anymore.
Is there any passible way that you could send me this program;
or are the any other way/place where i can get it?
Thank you, Irek
Click to expand...
Click to collapse
This sounds like Fonix Voice dial. I comes on the CD with some MDA Minis. Do you have the CD?
You can order it from www.fonix.com online.
Yes i did find out it was Fonix i am missing now.
I do have 2 cd's but there is not Fonix on it?
I would like to have it even if it never worked ok on my phone.
All she said was "pleas speak more clearly"
I was never able to diale the number useing my Fonix.
Where can i find it in my cd ? I guess i do not have it at all.
Irek

Problem sending SMS from pocket PC (G-smart)

Hi All, im hoping that soemone will be able to help with a problem I have.
I recently got the Gigabyte G-Smart from a seller on ebay (like this one)
http://www.expansys.com/p.aspx?i=133620
and it works absolutley great EXCEPT that it will not send sms texts. If i input the text and press send then it moves the message to the outbox and then it stays there and doesnt send the message (I.e. move it to the sent box) does anyone know why this is?
The sim cards works fine in my old K750i mobile, send texts no problems, and also in the Orange M600 that I am selling (when i send sms, it goes to the sent folder and the text has been sent)
It has windows mobile 5.0 build 14955.2.3.0
Can anyone help, because this problem is driving me nuts! I love the "phone style" keypad connected to this Pocket PC but this problem means I cant use it as my main phone yet because I cant text!!
Many thanks
Any and all help would be appreciated! Anyoe hear of a problem like this with a pocket PC phone? I tried to hard reset the phone but the problem still happens :-(
Have you tried...?
Hi... My last cell phone was a k750i too and I moved my GSM Chip to new g-Smart i128 and I didn't have any problem doing it...
1. Have you tried to use a different GSM CHIP (from any friend) with g-Smart i128?... just to know if the problem is g-Smart or your GSM CHIP...
2. Have you tried to update your g-Smart i128 firmware?
Check this posts...HERE... I hope it could be helpful for you and not to be too late... hehehe

O2 XDA IQ with non-O2 ROM problem!

Hi people,
Sorry to bother you with this, but I bet most people don't post until they have a problem!!!
I've just taken the plunge and updated the ROM on my O2 XDA IQ, and now it won't send or receive SMS! It gives me a "SIM is not valid" error message.
Does anyone know how I can fix this? Or explain why it is giving me this error message? Is it because of the CID being different? Or the region of the ROM I put on?
Thanks for reading!
G
are you using a different sim network? i guess your phone is still sim/cid locked.
I switched to Orange, and was able to send SMS fine for a week before I changed the ROM, so it's not a problem with the SIM. Is there a way to change the phones CID back to it's original value (I made sure I noted it down before changing it to the Super-CID)?
im not sure about that. your device should be working properly. try to go over the procedures again.
Did anyone manage to sort this out? I have the same problem, with an orange sim. Cant send or receive text messages, calls are fine. The sim works fine in other phones, and other network sims work fine in the IQ. Tried both the SP5 rom and the 8310 with no luck. In call options it doesnt have the service centre numbers, but if I try and change it, it doesnt save just goes blank every time.
I would revert to the O2 rom but cant find that anywhere! I have all original CDs with the IQ I find it disgusting they dont provide the ROM. That would be like buying a PC from the shop with a windows CD!
Try to call/ask Orange Customer Service then ask for their Text Messages Center Number..write it down. Then on your phone, navigate to Start - Settings - Phone - Call Options - Text Messages Service Center, then enter the number that the Orange Rep gave to you.
That's the problem of sim being not compatible with the rom.
U need the latest rom from orange 2.0.14.0 for spv c600, on this rom this problem is solved by orange, but I don't think you would be happy with it.

T-Mobile UK Users - Important Information re Voicemail Issue

Anyone using, or planning to use, the HTC Touch Cruise on the UK T-Mobile network will very probably need to do a special setup on their device to get voicemail access working properly.
The symptom is that your callers will be able to leave you voicemail messages but you will not be able to pick them up from your phone. When you get a voicemail message you will get the notification but when you press the soft key to access voicemail it will dial the number but you will then get an error message saying "access to this number is barred" and the system will hang up on you.
If you try accessing voicemail by holding down the "1" key or by explicitly dialing the voicemail access number retrieved from the network (probably of the form "+44050<your mobile number minus the leading zero>" or ""+44068<your mobile number minus the leading zero>") you will get the same message. Dialing 222 will work but will also initiate a voicemail setup message each time and however many times you switch your phone on and off to reload the voicemail settings from the network it still won't work.
I just spent 2 days with the very helpful T-Mobile support to sort this out, ultimately getting escalated up two levels in the technical support group, until I got someone who recognised the problem.
The issue is simple to resolve. The problem is that the format of the voicemail access number that the T-Mobile UK network pushes down to the handset is incompatible with the HTC software on the Touch Cruise (and maybe other devices too). The thing the software doesn't like is the "+" at the beginning.
To fix it go to the Settings/Personal/Phone application and click the second tab ("Services"). Now select "Voice Mail and Text Messages" and click "Get Settings...". You should now see a screen with two access numbers populated, one for voicemail and the other for text messages. Both will probably start with "+44". The text message access number is OK so don't mess with that but the voicemail access number won't work with the UK network. Simply replace the "+" with "00" and click OK and then your voicemail should work as you expect.
I haven't tried accessing voicemail outside the UK so it is possible that the above might break your access when roaming and you might need to edit back the "+" when travelling. I'd be interested in knowing if anyone has any experience with non-UK access and a "0044..." setting rather than the default "+44...", does it dial the UK access number OK?
(Actually, I never looked at the mechanics of accessing voicemail outside the UK, does it still dial the UK number or does the host network automatically push an alternate local access number to your phone when you register with the network?)
- Julian
Nice on Julian. I bought an Orbit 2 on O2, but my number doesn't transfer to O2 for few days yet, so have been using my T-Mobile SIM, and also experiencing this problem.
Thanks for sharing the tip!
I'm on UK T-Mob Web&Walk. Switched the +44 entry to 0044...but my TC then coundn't send texts. Switched it back and fortunately can still access voicemail as well as send texts. Strange.
I'm with T-mobile running an old T-mobile sim card on my new TC, when first called voice mail it gave me a long introduction then said "turn of your mobile off and on again to not get this messages again", I turned TC to "air plain mode" back to on mode and everything was cool from there on.
It seems that not everyone have that problem OR T-mobile has sort out that problem after Julian told them about the problem. In any case, thanks Julian to share this with us.
PS (today after reading this post is the first time that I use voice mail with my new TC)
Similar problem on WM 6.5 Asus Crystal
I had exactly this problem with T-Mobile and WM 6.5.
T-Mobile technical support was excellent, ringing back on several occasions to ensure that the problem was fixed, even though my handset is not a supported model. Once I was put through to 2nd layer support they fixed it in seconds.
In a nutshell, if you text and voice service centre numbers begin with a +44......, change them to 0044......
This did not happen on my XDA Exec WM5.0, so appears to be a new thing in WM6.5?

[Q] International Dialing

Having searched this and various other forums I'll see if anyone here can help on this item. I've been using WM devices and XDA for many years and have now had to switch to a Droid 2 Global on Verizon due to work rather than choice. For over ten years I have entered my outlook contacts in the format +XX (YYY) ZZZ-ZZZZ where obviously, XX=country code.
When I dial by contact on the droid it fails and tells me the number is disconnected etc.
If I manually enter the number using this format with the "+" sign into the dialer then it switched the "+" to "011" and dials successfully.
If I create the contact on my phone and enter the "+" sign in the phone number it seems to automatically create a second number entry as "011" as well so it then dials successfully.
The odd part is several colleagues seem to be able to use their existing outlook contacts in the same format successfully.
I have tried switching on and off the assisted dialing and it doe snot seem to make any difference, calls still fail to go through.
I am using a D2G with a stock (but rooted) ROM
System 2.4.330.A956.Verizon.en.US
Android 2.2
Baseband N_01.48.05R
Apologies if I have missed something obvious, I know my way around WM but this is all new. Thanks in advance for any help.
I had a couple of issues with telephone number formats, installing the "More Locale 2" app (available on the market) seemed to fix them.
Mine was more a presentation issue though, I'm not sure if it will solve your dialer problem but it's worth a try.

Categories

Resources