This is CyanogenMod 10 created by me but now is continued by an user of androidworld (piso94)!
What works:
- everything
What doesn’t work:
- Offline charging (can't work good)
- Camera works but with low resolution and only with other app camera
- Funny sim (can't be fixed)
Gapps:
http://www.mediafire.com/?gumixbd9i2jciei
Rom:
http://lgics.altervista.org/
Source device folder: https://github.com/lgics/cm_device_lge_e510
Prerequisites:
Back up your contents of the sd card to PC
Root your phone
Install a recovery Clockworkmod
enter in recovery
Enable USB-MS toggle: Copy ROM.zip and GAPPS.zip
Disable USB-MS
Skip to the Installation section
Installation:
Enter recovery
Make a nandroid back up
Make full wipe (except wipe sd) for the first time installation
Flash from ZIP: Select ROM and reboot
Flash GAPPS and reboot
Have fun!
fixed audio and sensors
i dont have a hub, maybe i buy this phone today, because i need an android phone till my honor gets fixed (or not). So keep it up! show us the ita devs power! XD
Damn I expected the camera to work
Besides the no gsm thing and camera everything seems to work good. Very fast!
After many sleepless nights and many wasted weekends we are proud to present
Android 4.1.1 / Jelly Bean for Toshiba Folio 100
This is the current state of CyanogenMod 10 for the Toshiba Folio 100
READ THIS:
From Alpha 2 on we are using a new partition layout. You must install a new recovery using fastboot before installing the update and format all partitions.
The internal storage/sdcard partition must be formatted using the formatsd.zip from recovery.
From Alpha 3 on we have intergrated the CM-AutoUpdater. In order to make it work you must MANUALLY enter to the RECOVERY when the Folio reboots to install the Updates via AutoUpdater, as we have no way to automatically make the bootloader to boot the recovery image.
Since Alpha 4 the Folio can reboot to recovery on it's own. CM-AutoUpdater will work out of the box without the need to manually enter recovery anymore.
DOWNLOAD:
Support files:
formatsd.zip
Alpha 5:
cm-10-20121117-UNOFFICIAL-betelgeuse.zip
MD5:a8356b7ff85ecc69e90565d81cb9ef46
Recovery:
recovery-cwm-CM10-A3.img
Alpha 4:
cm-10-20121021-UNOFFICIAL-betelgeuse.zip
MD5: 2498235d8ef9782bedf1f348e63d055f
Recovery:
recovery-cwm-CM10-A3.img
Alpha 3:
cm-10-20121014-UNOFFICIAL-betelgeuse.zip
MD5: d1049e5626668b4aa6464f33ba08921c
Recovery:
recovery-cwm-CM10-A3.img
Alpha 2:
cm-10-20120927-UNOFFICIAL-betelgeuse.zip
Recovery:
recovery-cwm-6.0.1.4.img
MD5: 26649ff9e1ef00fb3c113e07ab22d5f4
Alpha 1:
cm-10-20120901-UNOFFICIAL-betelgeuse.zip
MD5: 88e3cb0703113859433032a93184c244
GOOGLE APPS:
gapps-jb-20120726-signed.zip
MD5: f62cfe4a827202899919fd932d5246d7
SOURCE CODE:
The git tree is here:
https://github.com/DerArtem/android_device_toshiba_betelgeuse
https://github.com/nopy/android_device_toshiba_betelgeuse
Kernel sources:
https://github.com/DerArtem/android_kernel_toshiba_betelgeuse
Things that work:
Kernel 3.1
HQ Video acceleration
Audio over Speaker
Audio over Headset
Audio over HDMI
HDMI Video
Camera - reported as front and back camera
3D acceleration
Bluetooth
LP0 Suspend
Wakeup from LP0 Suspend
Internal USB
USB Host Port
Acceleration Sensor
Power Button
Volume Keys
Touch Screen
Wifi
Brighness regulation
Internal and external SD
Vibrator
miniUSB Hotplug
Docking station
Audio jack switch
Internal microphone (sound is little quite yet)
A2DP Audio over Bluetooth
Touch Buttons
Voice and Data connections using Huawei 3G dongles (UMTS only)
Things that don't work yet:
SCO Audio over Bluetooth
Digital Compass (Android lib not finished yet - Kernel part finished)
Remote control - initial support added - need more inventigation
Power cable plug detection can take up to 10 seconds
Installation:
Install the recovery provided by Nopy using fastboot.
Copy everything on the the SD card and install the ROM using the recovery.
You must do a full wipe and format all partitions before installing the rom using CWM recovery.
Do a full wipe before installing this ROM.
Credits:
DerArtem
Nopy
The Cyanogenmod Team
The other Tegra Dev Teams where we have borrowed code (Adam, GTab, Vega, AC100)
And everybody else who I might have forgotten
If you like this ROM please don't hesitate to hit the donate and thanks button.
The build target for Folio 100 was submitted upstream to Cyanogenmod:
http://review.cyanogenmod.com/#/c/22586/
CHANGELOG
Version A3
* Added Auto Updater
* Now we use standard android mount pointns
* Fixed two button press
* Enabled voice features
* Added Huawei 3G Dongle (UMTS only) RIL library which suppots Voice and Data connections
* Fix shutdown after suspend
* Fix to resume from suspend and turn on screen by pressing the power buttone once
* Added a driver to access Folios EEPROM
* Many upstream fixes and changes
* Many cleanup
Fix-List & Improvements (Installation Guide post 9)
Folio 100 Android 4.1.2 CM 10 A5 Fix-List
[-] Wireless Network bug. (When turn on/off Wi-Fi or Bluetooth, both disconnects instantly and unable to connect again)
[-] SCO Audio over Bluetooth.
[-] Digital Compass.
[-] Remote control.
[-] Power cable plug detection can take up to 10 seconds.
[-] Sound bug. (After sleep sound dont work)
[-] Wi-Fi bug. (Network shows "Not in range")
[-] Shutdown/reboot bug. (Device my hang)
Folio 100 Android 4.1.2 CM 10 A5 Improvements
[-] Mouse moves are not very accurate. (When moving mouse fast)
[-] Back button bug. (After sleep back button changes to arrow down)
[-] Wi-Fi bug. (Wi-Fi connects faster if you enter to Settings app)
[-] Lag. (When watching YouTube and moving mouse, video lags)
[-] Hardware decoder. (Stream HD videos)
[-] Mouse buttons remapping. (LB-Click;MB-Menu;RB-Back)
[-] Fix external USB keyboard keys: "Caps Lock", "Num Lock" and "Scroll Lock".(Pressing them crash tablet)
[-] Include Onskreen Cornerstone app. (Separate .zip)
[-] Add option to disable/enable hardware buttons.
[-] Android Linaro.
[-] Control sound volume by sliding on status bar.
The bet 2 is a great alpha already!.. but waiting for the 'oficial release':laugh:
Eat this, Toshiba!
Wow awesome work thanks for resurrecting the folio100, this is a new day!
1st release is uploaded
DerArtem said:
1st release is uploaded
Click to expand...
Click to collapse
Awesome, gonna try it.
It isn't the same of the one you uploaded 2 days ago, right?
EDIT: it's a little too late, I think I'll try it tomorrow. ^^'
How-To A2 & A3 & A4 & A5 + revert back to original partition.
Hello, this is instructions to install CM10 A2 & A3 & A4 & A5.
Install A2 then A3,A4 and A5.
Jelly Bean / CM10 (4.1.2) Alpha 4(21.10.2012) & Alpha 5(17.11.2012)
Installation guide:
1. Download & install on top.
Jelly Bean / CM10 (4.1.2) Alpha 3 - 14.10.2012
Installation guide:
1. Download:
cm-10-20121014-UNOFFICIAL-betelgeuse.zip
recovery-cwm-CM10-A3.img
2.1. Copy&Paste cm-10-20121014-UNOFFICIAL-betelgeuse.zip to your SD Card and insert to your Folio 100.
2.2. Copy&Paste recovery-cwm-CM10-A3.img to your folder where fastboot application is located.("C:\Android\ToolsD". Your fasboot directory maybe different)
3. Connect your Folio 100 to PC.
4. Turn on Folio 100 and when "TOSHIBA" logo appears press (3xPower + VolUP) to enter fastboot.
5. Start CMD and type "cd C:\Android\ToolsD".(Without " ". Your fasboot directory maybe different)
6. Execute commands:
Code:
fastboot erase recovery
fastboot flash recovery recovery-cwm-CM10-A3.img
fastboot reboot
7. Enter recovery.
8. [Optional] Go to: "wipe cache partition" and "advanced">"wipe dalvik cache"
9. Install cm-10-20121014-UNOFFICIAL-betelgeuse.zip.
10. Enjoy & Hit Thanks to developers.
Jelly Bean / CM10 (4.1.1) Alpha 2 - 27.09.2012
Installation guide:
1. Download:
formatsd.zip
recovery-cwm-6.0.1.4.img
cm-10-20120927-UNOFFICIAL-betelgeuse.zip
2.1. Copy&Paste formatsd.zip and CM10ROM.zip to your SD Card and insert to your Folio 100.
2.2. Copy&Paste recovery-cwm-6.0.1.4.img to your folder where fastboot application is located.("C:\Android\ToolsD". Your fasboot directory maybe different)
3. Connect your Folio 100 to PC.
4. Turn on Folio 100 and when "TOSHIBA" logo appears press (3xPower + VolUP) to enter fastboot.
5. Start CMD and type "cd C:\Android\ToolsD".(Without " ". Your fasboot directory maybe different)
6. Execute commands:
Code:
fastboot erase userdata
fastboot erase system
fastboot erase cache
fastboot erase linux
fastboot erase recovery
fastboot flash recovery recovery-cwm-6.0.1.4.img
fastboot reboot
7. Enter recovery.
8. Go to: "mounts and storage"> Choose "format /cache","format /data","format /system","format /emmc".
9. Install formatsd.zip
10. Install CM10ROM.zip.
11. Enjoy & Hit Thanks to developers.
Revert Back to Original Partition
Guide:
1. Format everything.
2. Erase recovery via fastboot.
3. Flash CWM 3.0.28 recovery.
4. Install update-cm-7.2.0-RC0-Folio100-KANG-signed.
5. Go to "Settings">"Storage"> "Erase (Internal) SD card"(It should be 1GB of size overall)
6. Then your Internal SD card size should be 12,53GB.
7. Enjoy & Hit Thanks.
Downloaded.. Man is the folio operative now!!!!.. its smooth.. as smooth and fast as my SGSII with paranoid tablrt Rom!!
Comgratulations!!!
DerArtem, you are one of the most best android devs, thanks a lot
Hello,
Great!
- Sound via HDMI is working, im quite happy!
(I hear some pops when no sound-file is playing, e.g. when loading videostream etc.)
- hardware-decoding is working! It did not work until now! Gread
- have some mixture in density of app-drawer. maybe resulting from not making a full wipe.
@aheros: What's the difference between this ROM and your ripped ROM?
Kind Regards
Stefan
clap, clap, clap, clap, clap, clap, clap, clap, clap, clap.........................clap, clap
Thanks
hello derartem :highfive:
It is great to see jellybean one the folio
Wifi is working like a charm
if i put the tablet on 160 dpi the soft buttons are gone :crying:.
Why not make 160 dpi the default setting :good: ?
Thank you
amazing work in this rom :victory: until now is very smooth and very responsive
however, I just found these two problems:
- sometimes the shutdown process hangs up and the tablet will not turn off
- after installing some apps, I can not install more because it gives me the error "insufficient storage available"
Someone has tried sixaxis controler (ds3 driver bluetooth gamepad), stays in driver starting... all time any ideas?
Thanks you very much DerArtem!
EDIT
Nothing, works well, only need updated app.
thanks derartem !!! it s great job
bug for me :- turn off bug the screen stays on
- inernet browser navigation is slow
Hi,
the ROM is always very good, I see more quality here than in professional developers!
Anyway I have some issues with the sound, where sometimes it stop working just bringing some pops, after a reboot the sound is back again.
The WIFI seems to still having some disconnections.
Anyway IMHO is more stable than the CM9 version.
I wish you a funny Sunday! Have fun, don't work on this today!
Ciao
GT
Hi.
This is an amazing rom!! Wow!
The one problem is that i can't change the density, if i put 160 the tablet won't boot anymore.
Anyone have this bug too?
ty to all!
hey guys. I am new at this thing. I am very confused in how to install this firmware.
Can anyone help me through steps!? and what to download as well
Thanks!
Full credits go to
http://forum.xda-developers.com/showthread.php?p=38372027 ( amanmehta007 )
http://forum.xda-developers.com/showthread.php?t=2155529 ( parudthz )
TheWhisp for being AWESOME
LATEST DOWNLOAD: Mod edit: Download link removed
LATEST GOOGLE APPS:http://goo.im/gapps/gapps-jb-20121011-signed.zip
Changelog
========
* Added parudthz sensors.msm7x27a.so
* Added my gapps fix
* Added amanmehta007 V2 kernel
What's working and what's not
=============================
+ Full GPU acceleration
+ RIL (calls/sms/mobile data)
+ Wi-Fi
+ Touchscreen
+ Touch keys
+ Multitouch
+ Audio
+ ADB
+ Mounting of internal/external storage
+ UMS
+ Keypad lights
+ Brightness control
+ Vibrator
~ Deep sleep
+ GPS
+ Sensors (all,leaving rotaion)
+ Data usage, limiter
+ horizontal calibration
+ gapps
+ triple frame buffer
+ HW vsync
+ 1.3GHZ Overclock
+ KSM
+ Battery Management System
- Camera
- Bluetooth
- USB, Wi-Fi, Bluetooth tethering
How to install
==========
1. Download
2. Place on SD
3. Go to CWM
4. Wipe Data
5. Install modified.zip
6. Install gapps
7. ???
8. Profit!
i said you can help
not to kang
kang? Hmm?
provide me what you did
plz dont kang the works
INTRODUCTION:
Thanks to Oma7144's great work on the RK30 Odys Genio, and otyg for confirming this ROM works on the Pipo S1...
CURRENT POST STATUS:
DRAFT. Requires feedback. Works for me, your mileage may vary.
WARNINGS:
1. Read the entire post and decide if you can do everything before you begin.
2. I am not the ROM developer.
2. Read the development thread yourself to ensure I'm not telling lies.
3. Following in my footsteps might destroy your data, device or marriage.
RESOURCES:
Downloadables: Crew RKTablets and Downloads.
Developer topic: RK3066 Tab Genio by Oma rocks !.
INSTRUCTIONS:
Where am I up to? Looks like a lot of steps, but I've really spelt it out. Take your time.
1. Perform a recovery backup or manually Backup your data. I backup app data using Helium to external SD.
NOTE: Recovery backup might not work cleanly between versions of recovery.
2. Download the CM10.1 files from here:
- Odys Genio Beta v1.3.2
- format_NAND_fix
- Pipo S1 kernel
- 3.0.36+ CWM
3. Extract 'CrewRKTablets_RK30_Genio by Oma_CM10.1_v1.3.2.7z'
4. Delete the 'kernel.img' and 'recovery.img' files from /rockdev/image folder (Odys Genio Kernel/recovery is not compatible with Pipo S1)
5. Extract 'RK3-_kernel_308_s1_pipo2.7z' and 'Oma_RK30_3.0.36+_CWM_6.0.3.1.7z' archives to the /rockdev/image folder
6. Copy the 'Oma RK30 CM10.1 Format NAND.zip' archive to the external microSD card
7. Hard-off the tablet by long pressing the power button (4+ seconds)
8. Insert microSD card
9. Hold down the VOL- button while inserting microUSB cable to enter download mode
10. Start the 'RKAndroidTool.exe' found in the 'RKDevelopTool_v1.35' folder (right-click, run as administrator)
NOTE: The tool should say 'Found RKAndroid Loader Rock Usb'.
11. Hit 'EraseIDB' and wait for success (Clears partition table)
12. Hit 'Run'
Once 'INFO: Run OK', Pipo S1 will boot into recovery
**RECOVERY SHOULD BE v6.0.3.1**
13. Wipe cache
14. Wipe data/factory reset
15. Install zip from external card: Oma RK30 CM10.1 Format NAND.zip
16. Reboot.
17. Wait 5 minutes.
18. Once the tablet starts, select your prefered launcher, hit 'immer' (always).
19. Set the language to English:
- Hit the setting icon, 'Systemeinstellungen',
- Scroll down to 'Sprache & Einabe',
- Set 'Sprache' to your desired language.
20. Turn on and set up WiFi:
- In WiFi, toggle 'on'
- Hit the setting icon
- Select advanced
- Set keep WiFi on during sleep to Never (or Only when plugged in at least) to save battery
22. Fix landscape menu buttons not appearing
- Go to play store, sign in.
- Install Textdroider DPI from play store
- Set DPI to 120.
- Apply.
- Reboot.
Unresolved Issues:
- Wifi takes a few seconds to connect from sleep
- camera (front facing only) is upside down
- display artifacts on screen rotation
Troubleshooting:
Problem: If you get stuck with installs the loop you back to recovery constantly, you probably have CWM-based Recovery v6.0.1.5. This recovery does not work with the original Pipo S1 kernel.
Solution: Use recovery 6.0.3.1 with kernel RK3-_kernel_308_s1_pipo
Problem: You find yourself stuck in recovery with no way to power off
Solution: Select a menu item, highlight ++++Go Back++++, when you press the power button, do not let go until tablet powers off.
Hopefully this helps others with a Pipo S1 get Oma's CM10.1 v1.3.2 installed.
Pimp My Rom (included in rom) has DPI change in it, no need to load another app from store just to do that.
(Don't forget to press the thanks button )
This is the CM based AICP custom rom for BLU Studio Selfie S070Q. Enjoy folks
Rom Details:
Name: Android Ice Cold Project
Android Version: lollipop 5.1
Android kernel: 3.10.x
Rom porter and moderator : Prajwal Dhungana
Whats working:
1. Sim Cards
2. Mobile data (if it don't work then look for a video on you tube about DNS changing in Cm roms)
3. Camera
4. Audio
5. Google play services
6. Wifi
7. Bluetooth
8. Hotspot
9. Location
10. Nav Bars
11. Flashlight
12. SD card
Features:
1. Clock customization
2. Battery customization
3. Kernel auditor
4. Pre rooted
5. High quality sound tweaks
6. Speed tweaks
7. Other Build.prop tweaks
8. Fully bugless
9. System UI is amazing and amazing looks and graphics
10. Can change the screen resolution (default will be 240 but change font size to tiny and resolution to 220 to get best appearance)
Not working:
1.FM Radio only (as you know this is the universal problem for cm based roms)
(Follow my insructions or I wont be responsible for your bricked device)
How to install rom :
1.Unlock bootloader (You can find guides for unlocking bootloader for mtk devices on google Use skyneel adb drivers )
2. Install twrp/cwm/philz recovery on your device
3. Go to twrp mode .... at first fully backup your phone to sd card
4. Now put your downloaded AICP.zip into SD card
5. Advance wipe your device (system + cache + dalvix cache + internal + data but dont wipe ext sd card )
6. Now install the zip
7. As soon as the rom is installed .... then go go http://opengapps.org then download (ARM - 5.1 - Stock gapps ) then connect your device in twrp mode to computer and send downloaded gapps to sd card
8.Now go to install in twrp and install the gapps as well
9.Now wipe the dalvix cache again
10. Reboot your phone and you will be running CM 12.1 based AICP on your BLU studio selfie
Here's the link :
https://drive.google.com/file/d/0B_8NzSmywh8TWWlhTkY3VGlXVkU/view?usp=sharing
If you are looking for the TWRP recovery that I made, here's the link
https://drive.google.com/file/d/0B_8NzSmywh8TZjF2M3IwVDg4bW8/view?usp=sharing
Enjoy folks