Related
This is CyanogenMod 10 created by me but now is continued by an user of androidworld (piso94)!
What works:
- everything
What doesn’t work:
- Offline charging (can't work good)
- Camera works but with low resolution and only with other app camera
- Funny sim (can't be fixed)
Gapps:
http://www.mediafire.com/?gumixbd9i2jciei
Rom:
http://lgics.altervista.org/
Source device folder: https://github.com/lgics/cm_device_lge_e510
Prerequisites:
Back up your contents of the sd card to PC
Root your phone
Install a recovery Clockworkmod
enter in recovery
Enable USB-MS toggle: Copy ROM.zip and GAPPS.zip
Disable USB-MS
Skip to the Installation section
Installation:
Enter recovery
Make a nandroid back up
Make full wipe (except wipe sd) for the first time installation
Flash from ZIP: Select ROM and reboot
Flash GAPPS and reboot
Have fun!
fixed audio and sensors
i dont have a hub, maybe i buy this phone today, because i need an android phone till my honor gets fixed (or not). So keep it up! show us the ita devs power! XD
Damn I expected the camera to work
Besides the no gsm thing and camera everything seems to work good. Very fast!
After many sleepless nights and many wasted weekends we are proud to present
Android 4.1.1 / Jelly Bean for Toshiba Folio 100
This is the current state of CyanogenMod 10 for the Toshiba Folio 100
READ THIS:
From Alpha 2 on we are using a new partition layout. You must install a new recovery using fastboot before installing the update and format all partitions.
The internal storage/sdcard partition must be formatted using the formatsd.zip from recovery.
From Alpha 3 on we have intergrated the CM-AutoUpdater. In order to make it work you must MANUALLY enter to the RECOVERY when the Folio reboots to install the Updates via AutoUpdater, as we have no way to automatically make the bootloader to boot the recovery image.
Since Alpha 4 the Folio can reboot to recovery on it's own. CM-AutoUpdater will work out of the box without the need to manually enter recovery anymore.
DOWNLOAD:
Support files:
formatsd.zip
Alpha 5:
cm-10-20121117-UNOFFICIAL-betelgeuse.zip
MD5:a8356b7ff85ecc69e90565d81cb9ef46
Recovery:
recovery-cwm-CM10-A3.img
Alpha 4:
cm-10-20121021-UNOFFICIAL-betelgeuse.zip
MD5: 2498235d8ef9782bedf1f348e63d055f
Recovery:
recovery-cwm-CM10-A3.img
Alpha 3:
cm-10-20121014-UNOFFICIAL-betelgeuse.zip
MD5: d1049e5626668b4aa6464f33ba08921c
Recovery:
recovery-cwm-CM10-A3.img
Alpha 2:
cm-10-20120927-UNOFFICIAL-betelgeuse.zip
Recovery:
recovery-cwm-6.0.1.4.img
MD5: 26649ff9e1ef00fb3c113e07ab22d5f4
Alpha 1:
cm-10-20120901-UNOFFICIAL-betelgeuse.zip
MD5: 88e3cb0703113859433032a93184c244
GOOGLE APPS:
gapps-jb-20120726-signed.zip
MD5: f62cfe4a827202899919fd932d5246d7
SOURCE CODE:
The git tree is here:
https://github.com/DerArtem/android_device_toshiba_betelgeuse
https://github.com/nopy/android_device_toshiba_betelgeuse
Kernel sources:
https://github.com/DerArtem/android_kernel_toshiba_betelgeuse
Things that work:
Kernel 3.1
HQ Video acceleration
Audio over Speaker
Audio over Headset
Audio over HDMI
HDMI Video
Camera - reported as front and back camera
3D acceleration
Bluetooth
LP0 Suspend
Wakeup from LP0 Suspend
Internal USB
USB Host Port
Acceleration Sensor
Power Button
Volume Keys
Touch Screen
Wifi
Brighness regulation
Internal and external SD
Vibrator
miniUSB Hotplug
Docking station
Audio jack switch
Internal microphone (sound is little quite yet)
A2DP Audio over Bluetooth
Touch Buttons
Voice and Data connections using Huawei 3G dongles (UMTS only)
Things that don't work yet:
SCO Audio over Bluetooth
Digital Compass (Android lib not finished yet - Kernel part finished)
Remote control - initial support added - need more inventigation
Power cable plug detection can take up to 10 seconds
Installation:
Install the recovery provided by Nopy using fastboot.
Copy everything on the the SD card and install the ROM using the recovery.
You must do a full wipe and format all partitions before installing the rom using CWM recovery.
Do a full wipe before installing this ROM.
Credits:
DerArtem
Nopy
The Cyanogenmod Team
The other Tegra Dev Teams where we have borrowed code (Adam, GTab, Vega, AC100)
And everybody else who I might have forgotten
If you like this ROM please don't hesitate to hit the donate and thanks button.
The build target for Folio 100 was submitted upstream to Cyanogenmod:
http://review.cyanogenmod.com/#/c/22586/
CHANGELOG
Version A3
* Added Auto Updater
* Now we use standard android mount pointns
* Fixed two button press
* Enabled voice features
* Added Huawei 3G Dongle (UMTS only) RIL library which suppots Voice and Data connections
* Fix shutdown after suspend
* Fix to resume from suspend and turn on screen by pressing the power buttone once
* Added a driver to access Folios EEPROM
* Many upstream fixes and changes
* Many cleanup
Fix-List & Improvements (Installation Guide post 9)
Folio 100 Android 4.1.2 CM 10 A5 Fix-List
[-] Wireless Network bug. (When turn on/off Wi-Fi or Bluetooth, both disconnects instantly and unable to connect again)
[-] SCO Audio over Bluetooth.
[-] Digital Compass.
[-] Remote control.
[-] Power cable plug detection can take up to 10 seconds.
[-] Sound bug. (After sleep sound dont work)
[-] Wi-Fi bug. (Network shows "Not in range")
[-] Shutdown/reboot bug. (Device my hang)
Folio 100 Android 4.1.2 CM 10 A5 Improvements
[-] Mouse moves are not very accurate. (When moving mouse fast)
[-] Back button bug. (After sleep back button changes to arrow down)
[-] Wi-Fi bug. (Wi-Fi connects faster if you enter to Settings app)
[-] Lag. (When watching YouTube and moving mouse, video lags)
[-] Hardware decoder. (Stream HD videos)
[-] Mouse buttons remapping. (LB-Click;MB-Menu;RB-Back)
[-] Fix external USB keyboard keys: "Caps Lock", "Num Lock" and "Scroll Lock".(Pressing them crash tablet)
[-] Include Onskreen Cornerstone app. (Separate .zip)
[-] Add option to disable/enable hardware buttons.
[-] Android Linaro.
[-] Control sound volume by sliding on status bar.
The bet 2 is a great alpha already!.. but waiting for the 'oficial release':laugh:
Eat this, Toshiba!
Wow awesome work thanks for resurrecting the folio100, this is a new day!
1st release is uploaded
DerArtem said:
1st release is uploaded
Click to expand...
Click to collapse
Awesome, gonna try it.
It isn't the same of the one you uploaded 2 days ago, right?
EDIT: it's a little too late, I think I'll try it tomorrow. ^^'
How-To A2 & A3 & A4 & A5 + revert back to original partition.
Hello, this is instructions to install CM10 A2 & A3 & A4 & A5.
Install A2 then A3,A4 and A5.
Jelly Bean / CM10 (4.1.2) Alpha 4(21.10.2012) & Alpha 5(17.11.2012)
Installation guide:
1. Download & install on top.
Jelly Bean / CM10 (4.1.2) Alpha 3 - 14.10.2012
Installation guide:
1. Download:
cm-10-20121014-UNOFFICIAL-betelgeuse.zip
recovery-cwm-CM10-A3.img
2.1. Copy&Paste cm-10-20121014-UNOFFICIAL-betelgeuse.zip to your SD Card and insert to your Folio 100.
2.2. Copy&Paste recovery-cwm-CM10-A3.img to your folder where fastboot application is located.("C:\Android\ToolsD". Your fasboot directory maybe different)
3. Connect your Folio 100 to PC.
4. Turn on Folio 100 and when "TOSHIBA" logo appears press (3xPower + VolUP) to enter fastboot.
5. Start CMD and type "cd C:\Android\ToolsD".(Without " ". Your fasboot directory maybe different)
6. Execute commands:
Code:
fastboot erase recovery
fastboot flash recovery recovery-cwm-CM10-A3.img
fastboot reboot
7. Enter recovery.
8. [Optional] Go to: "wipe cache partition" and "advanced">"wipe dalvik cache"
9. Install cm-10-20121014-UNOFFICIAL-betelgeuse.zip.
10. Enjoy & Hit Thanks to developers.
Jelly Bean / CM10 (4.1.1) Alpha 2 - 27.09.2012
Installation guide:
1. Download:
formatsd.zip
recovery-cwm-6.0.1.4.img
cm-10-20120927-UNOFFICIAL-betelgeuse.zip
2.1. Copy&Paste formatsd.zip and CM10ROM.zip to your SD Card and insert to your Folio 100.
2.2. Copy&Paste recovery-cwm-6.0.1.4.img to your folder where fastboot application is located.("C:\Android\ToolsD". Your fasboot directory maybe different)
3. Connect your Folio 100 to PC.
4. Turn on Folio 100 and when "TOSHIBA" logo appears press (3xPower + VolUP) to enter fastboot.
5. Start CMD and type "cd C:\Android\ToolsD".(Without " ". Your fasboot directory maybe different)
6. Execute commands:
Code:
fastboot erase userdata
fastboot erase system
fastboot erase cache
fastboot erase linux
fastboot erase recovery
fastboot flash recovery recovery-cwm-6.0.1.4.img
fastboot reboot
7. Enter recovery.
8. Go to: "mounts and storage"> Choose "format /cache","format /data","format /system","format /emmc".
9. Install formatsd.zip
10. Install CM10ROM.zip.
11. Enjoy & Hit Thanks to developers.
Revert Back to Original Partition
Guide:
1. Format everything.
2. Erase recovery via fastboot.
3. Flash CWM 3.0.28 recovery.
4. Install update-cm-7.2.0-RC0-Folio100-KANG-signed.
5. Go to "Settings">"Storage"> "Erase (Internal) SD card"(It should be 1GB of size overall)
6. Then your Internal SD card size should be 12,53GB.
7. Enjoy & Hit Thanks.
Downloaded.. Man is the folio operative now!!!!.. its smooth.. as smooth and fast as my SGSII with paranoid tablrt Rom!!
Comgratulations!!!
DerArtem, you are one of the most best android devs, thanks a lot
Hello,
Great!
- Sound via HDMI is working, im quite happy!
(I hear some pops when no sound-file is playing, e.g. when loading videostream etc.)
- hardware-decoding is working! It did not work until now! Gread
- have some mixture in density of app-drawer. maybe resulting from not making a full wipe.
@aheros: What's the difference between this ROM and your ripped ROM?
Kind Regards
Stefan
clap, clap, clap, clap, clap, clap, clap, clap, clap, clap.........................clap, clap
Thanks
hello derartem :highfive:
It is great to see jellybean one the folio
Wifi is working like a charm
if i put the tablet on 160 dpi the soft buttons are gone :crying:.
Why not make 160 dpi the default setting :good: ?
Thank you
amazing work in this rom :victory: until now is very smooth and very responsive
however, I just found these two problems:
- sometimes the shutdown process hangs up and the tablet will not turn off
- after installing some apps, I can not install more because it gives me the error "insufficient storage available"
Someone has tried sixaxis controler (ds3 driver bluetooth gamepad), stays in driver starting... all time any ideas?
Thanks you very much DerArtem!
EDIT
Nothing, works well, only need updated app.
thanks derartem !!! it s great job
bug for me :- turn off bug the screen stays on
- inernet browser navigation is slow
Hi,
the ROM is always very good, I see more quality here than in professional developers!
Anyway I have some issues with the sound, where sometimes it stop working just bringing some pops, after a reboot the sound is back again.
The WIFI seems to still having some disconnections.
Anyway IMHO is more stable than the CM9 version.
I wish you a funny Sunday! Have fun, don't work on this today!
Ciao
GT
Hi.
This is an amazing rom!! Wow!
The one problem is that i can't change the density, if i put 160 the tablet won't boot anymore.
Anyone have this bug too?
ty to all!
hey guys. I am new at this thing. I am very confused in how to install this firmware.
Can anyone help me through steps!? and what to download as well
Thanks!
Samsung Galaxy SL i9003 Full DDLF2 Performance and Battery Duration Guide (Clean Flashing; Rooting; Custom Kernel and ClockWork Mod Recovery)
Greetings everyone!
As promised i've updated this tutorial (sorry for the 6 Months delay).
Download this Tutorial (*.pdf File) http://www.mediafire.com/view/ay0kfbtcd2ap6dm/rgxHost_i9003_DDLF2_Complete_Tutorial.pdf
Device: Samsung Galaxy SL i9003
ROM(s): Full DDLF2 (XWKPG or XXKPE) (Note that Deodex file won't Work for XWKPG or XXKPE)
Target: Get Best Battery Duration; Good System Performance and Less Bloatware as Possible. (Including EXT4 for some Extra Performance)
Using: Universal ClockWork Mod Recovery and Custom Kernel (By BCK)
Log:
* Fixed some improper steps;
* Added some recommended aplications and tips that can enhance the performance and fix some system bugs (i.e: Preventing the Full RAM Crash and Restart issue);
* Added Links for XWKPG or XXKPE ROMs wich seem to be unavailable elsewhere.
* Changed the Tutorial Method to work with almost every Rom while supporting DDLF2 Rom (Including How to Perform a Clean Install / Flash)
[Special Thanks to]:
"XDA_Bam": (For his simplest combined CWM + CF-ROOT and Kernel file. Made everything a lot easier).
"sgatechwork": For the Best Gingerbread Rom cooked for our i9003. (And if i'm not mistaken he also owns the credit of the Deodexing Files)
[To Download Before Proceeding]
:: Your Gingerbread Stock Rom ::
DDLF2 FULL (Original Thread): http://forum.xda-developers.com/showthread.php?t=2329200
Mirror Link: http://www.mediafire.com/download/u96833iufz64auo/DDLF2_Full_(PIT,BOOTLOADER,PDA,PHONE,CSC).zip
[DDLF2 DEODEX] (Mirror Link): http://www.mediafire.com/download/m44e62zsryvcvlo/Deodex_DDLF2_Cwm.zip
[DDLF2 Delete Unwanted Files]: (Mirror Link) http://www.mediafire.com/download/h2aby5sf3pyhpt5/DeleteUnwantApp_Cwm-New.zip
Other Roms
XWKPG (Mirror Link): http://www.mediafire.com/download/27006o6h38kecc2/I9003XWKPG_I9003DBTKP2_DBT.zip
XXKPE (Mirror Link): http://www.mediafire.com/download/72ah13hizi7aok6/XXKPE.zip
:: BAM Universal CF-Root (Incl: CWM + CF-ROOT + Custom Kernel) ::
Original Thread: http://forum.xda-developers.com/showthread.php?t=1355675
Mirror Link: http://www.mediafire.com/download/5ejxf1xznub8eaz/PDA_BCK_CWM_universal_beta15.tar
Note: Since i couldn't get some links for original threads, Files and/or ROM's i'm providing my own links for them.
If by some reason i may be violating any terms, please let me know by sending me a message indicating wich file or files are causing any problem, and or to wich thread(s) they should be pointing to.
Furtherwards the files i'm providing were downloaded from the original sources including Sammobile. (wich sometime get their links unavailable). They are EXACTLY the same as their source and are intended to be kept that way.
[WARNING]
By proceeding with the following tutorial you aknowledge that i will not be held responsible if your device gets bricked or gets any other sort of damage.
Although the intent of this tutorial is to help people out and have the most for their devices. Just proceed accordingly.
Always Remember to:
- Make a Backup of your EFS;
- Never mess up with ODIN checkboxes;
- Never Unplug your device whenever it is flashing;
- Have ClockWork Mod Recovery (or TWRP Recovery) so you don't end up without knowing how to restore your device;
- Read all the steps carefully.
TUTORIAL
[BEFORE PROCEDING]
Note: If you Miss your device Drivers Please Install Samsung Kies First.
1. [BACKUP YOUR EFS FOLDER]
For Best Results Create a EFS Backup as: *tar / *.tar.gz / *.img / and a direct copy of the EFS Folder.
Thread on how to Backup and Restore your EFS: http://forum.xda-developers.com/showthread.php?t=2329937
Note: There are some application at Google Play that can also do it for You. (i.e: Galaxy SL Unlock or GSII_Repair, etc)
2. [BACKUP YOUR SD CARD]
Formatting your External SDCard is important, but not required.
Therefore you may not perform a Backup but removing SDCard before Flashing is advised.
[FLASHING THE ROM]
Note: This guide refers methods for "ClockWork Mod Recovery" (CWM)
1) Remove your SDCard (if you've not done it already)
2) Reboot Into CWM or TWRP Recovery (If you don't have it search for the Proper Recovery for your Device)
Booting into "Recovery"
(Press and Hold) Vol. Up + Home Button + Power Button (Release after the 1st Logo is Shown)
3) Under CWM Recovery Select under the following Menus:
<"Main Menu"> :: "Wipe Cache Partition"
<"Advanced"> :: "Wipe Dalvik Cache" (then return to 1st Menu)
<"Mounts and Storage"> :: "Format Cache"
<"Mounts and Storage"> :: "Format Data"
<"Mounts and Storage"> :: "Format System"
<"Mounts and Storage"> :: "Format DataData"
<"Mounts and Storage"> :: "Format SDCard"
<"Mounts and Storage"> :: "Format EMMC"
4) Return to Main Menu and Perform a "Factory Reset".
5) Remove USB Cable and Reboot your device into "Download Mode".
Booting into "Download Mode"
(Press and Hold) Vol. Down + Home Button + Power Button (Release only when it Loads under "Download Mode")
6) Open Odin
7) [ODIN] Under [PIT / OPS] Load your "*.pit" File (i.e: "latona_20110114.pit")
8) Restart Your Device. Once You Get the "Black Screen", Remove the Battery and Boot into CWM.
9) [ODIN] Load Rom Files
Note:If you come from other a Custom Rom, you may have to Flash Original Firmware 1st.
Note: Always Double Check if you're Loading the Files (Bootloader, PDA, Phone/Modem and CSC) in the proper Place.
Note: While the operation is running Do NOT Remove your USB Cable or Disconnect Your Battery untill you see the "PASS!" message on the top left corner.
Note: To prevent Flash Failures; always use High Quality USB Cables; and before pressing Start Put down your device and don't touch it untill the operation is complete!
You may check Loaded Files example bellow (for Full DDLF2 ROM).
i.e:
[BootLoader]: "APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5"
[PDA]: "CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5"
[Phone]: "MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5"
[CSC]: "GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5"
10) [ODIN]
Note a) If you come from Ice Cream Sandwich, Jelly Bean or KitKat (Custom) Roms; it is advised to select "Re-Partition" Checkbox.
Note b) Make sure you have not Selected/de-Selected any Checkboxes (except the one refered at "a" above).
Never change anything if you don't have no idea what they are for.
Specially "Phone EFS Clear". This will literally kill the ability to use your device as a Phone.
Also note that Only a Box or Samsung Service can restore your IMEI if this ("Phone EFS Clear") happens to be Selected.
11) Now that you've Double Checked Everything put Down your Device, Press "Start" and Read the Next Step.
12) When your device completes the procedure above, wait for it to load the 2nd Boot Logo (Usually Animated).
Note that the device may load automatically under recovery to Access, Install and Configure CSC.
If it doesn't then: once the 2nd Logo Starts, count to 3, remove your Battery and Boot your Device under Recovery (Not CWM at the Moment - Reason found Bellow).
This will make sure that the CSC is Installed and Properly Configured (Except if there are any issues with your device, or if you've skipped any of the operations mentioned above).
Note: If you've Flashed Stock Firmware: Know that after you Flash Stock Firmware You lose "ClockWork Mod Recovery". Therefore you must flash it again.
So let's Flash CWM with CF-Root and Custom Kernel (ClockWork Mod Recovery; with Root Permissions and Custom Kernel).
[FLASHING CWM, CUSTOM KERNEL AND ROOT THE DEVICE] (1 File Steps)
1) Remove USB Cable; Power Off your Device and Boot into "Download Mode".
2) Connect your USB Cable, Reset Odin Settings and Under ["PDA"] Load the Following File: "PDA_BCK_CF-root_universal_beta15rc8.tar"
Thread for PDA_BCK_CF-Root_universal: http://forum.xda-developers.com/showthread.php?t=1355675
3) Put Down your Device and Press Start.
4) Once Completed you now have (A rooted Device with Custom Kernel and CWM Recovery).
Your device shall Reboot into CWM Recovery; if it doesn't Reboot it into Recovery and Perform a Factory Reset Again.
Just to clarify: By Performing this "Factory Reset" (Again) you prevent some Errors like:
- Phone Lagging (Specially While Sliding Between Application Pages)
- Getting some configs from previous flashing
Although some sort of lagging will always be present sometimes.
Remember that this is not an ICS, JB or KK Rom nor LoLaTiOn GingerBread that runs ultra fast!
Those Roms are freaking Good (besides some bugs here and there) and i could only recommend them if you use your phone in a "Always Connected to Charger" State.
i.e: your Car as a Multi Functional Stereo; Mp3 Player; GPS and Phone.
Still You will Kill for sure your Battery! (Eventually... Mine Got Fat! Too Much Fast Food (i mean Fast Roms! =) )
P.S: No disrespect for their work wich i apreciate so much. (I'm sure you understand what i mean)
[REMOVING BLOATWARE] [Deodexing] (ONLY For DDLF2)
There are some different ways to accomplish this.
I'm pointing 2 easiest ways, since i didn't get into Deodexing (for Experts) myself.
Remember: This Deodexing tutorial is only for DDLF2 ROM !!! (Wich i USe by the way)
1st Method:
Download "DeleteUnwantApp_Cwm-New.zip" copy to your SDCard and Flash Under CWM Recovery.
This will delete some pre-selected applications. Maybe the safest method for completely inexperienced people.
2nd Method:
1) Copy "Deodex_DDLF2_Cwm.zip" to your SDCard
2) Boot your Device into Recovery (You can now use CWM Application to do it)
Note: Within the application you can boot either to Recovery or Download Mode.
3) Under CWM Recovery Select: Flash ZIP from SDCard; Go to the Folder where you've previously copied "Deodex_DDLF2_Cwm.zip"
Select it and flash it.
4) After it completes the operation, reboot your device and Install "ES File Explorer". (Found on Google Play)
Note: Or just open your favourite File Explorer. Although i made this tutorial for specific applications. (Including "ES File Explorer")
Reason: The applications i mentioned don't give me issues... (Errors or Bugs), and they are extremely usefull somehow and/or fast (with the lowest resource consumption as possible).
5) On the Top Left Corner you have a "List" Button.
- Enable: "Root Explorer" and press that Label Text to pop-up some extra options.
- Select: Mount R/W
- Set "/system" as RW (After you remove undesired applications Place it back under RO)
Note:
"RW" Stands for: "Re-Writable"
"RO" Stands for: "Read Only"
6) Go back to the "List" Button and Select "Library" > "APP"
7) On the Top Click where you see "User Apps", and select: "System Apps"
8) Remove the Applications that you don't use.
Note that not everything can or shall be removed! Some are part of the system itself.
Best thing to do is to note down the application names that you dont like.
Here's a List of some Applications you can Safely Remove:
- Google Maps;
- Talk;
- Gmail (Email Apk);
- Layar;
- Calculator;
- Samsung Apps;
- ThinkFree Office;
- *Youtube;
Note: I wouldnt remove "youtube" if you will youse it later. If you remove it and try to install Youtube from the Market (at least with DDLF2 Rom) the system will Crash on Minimize Video and Reboot.
Other Custom ROMs by some unknown reason run YouTube Perfectly.
9) Removing Several System Applications at Once:
- Press and Hold one of the Applications you want to remove (This will Enable Multiple Selection);
- Then Select the others;
- Press the Garbage Bin on the Bottom ("Uninstall")
- Confirm that you wish to Uninstall and Wait for the Application to Complete.
- Skip Errors / Force Close(s)
Note: It is possible that the device Restarts during this operation.
If so, re-check the application you want to Uninstall.
10) Once Completed Restore "/system" to Read Only ("RO").
On the Top Left Corner you have a "List" Button.
- Go to: Tools.
- You may leave Root Explorer Option Enabled if you prefer that way.
- Press "Root Explorer" Label Text to pop-up the extra options.
- Select: Mount R/W
- Set "/system" as RO
11) Done! ...or if you want to go further into perfecting...
12) The following steps are not necessary... Personally i do them anyway just to ensure the system will Work Properly without the Applications i've Removed.
- Reboot Under CWM and Perform a "Factory Reset"
- Reboot to System and Test Everything.
[PREPARING YOUR SYSTEM FOR EVERYDAY USE] + [INSTALLING RECOMMENDED APPLICATIONS] + [TWEAKING THE DEVICE]
"Some Information" ("Installing Tweaking Applications")
Like mentioned before this tutorial aims for a balance between Performance and Battery Duration.
As some of you already know Gingerbread is amazing for Battery Duration, although it's not the fastest Rom and unfortunly it has also a terrible Task Manager.
Therefore i'm including some applications to tweak your device so you can achieve the balance that you can't find in any other Custom Rom.
i.e: Cyanogen based Roms who Consumes a Lot of battery.
"Applications List" ("Installing Tweaking Applications")
Im not going to talk about every single one as this tutorial aims mostly for Performance and Battery Duration.
Bellow you'll find a brief description of some things you can do with the following applications.
- "CPU Master Pro" (Not Free - Unfortunely) or Similar Application that can set CPU Frequency Profiles like (Charging; Screen Off; In Call; Low Battery and Temperature Over-Heat)
- "SGS Tools" (Mostly for advanced users) This application can Remove Boot Sounds; and fix your GPS Location so it locates faster. Has also a ".prop" Editor, and some aditional advanced features in there! Just Freaking usefull!
- "Twilight" (Screen Dimmer) (Red Light Dimmer; with Profiling Options. Very Good and Free Application)
- "Busybox" or "Busybox X" (Not 100% necessary, but Recommended. Some applications require their installation)
- "ES File Explorer" (For me the Best File Explorer. Fast; Usefull; Visually Pleaseant)
- "Task Manager" (To Improve your device Performance. Your device seems not to reboot anymore when it uses all ammout of RAM. You simply won't let it happen!)
- "Nemus Launcher" (Fast Fast Launcher! With low Resource Consuption)
- "XDA Free" (Your Favourite Forum Application! Where you can rate and thank this thread wich gave me some hours of work; post your questions (read Forum Rules 1st is Important); ask for support; make new buddies; etc...)
"Setting Up Applications"
CPU Master Pro: (Paid)
Ok this will be "al gusto" (configured the way you prefer), but i'm going to point some of my own tips.
If you want to do further research follow this thread: http://forum.xda-developers.com/showthread.php?t=1767797
If you want to take a shotcut...
Then here's some resumed info. (So you can manage your profiles perfectly).
:["Scalings"]:
"Scalings" manage the CPU Behaviour.
Therefore they will help you get the most performance and battery duration.
There are several scalings (including custom Scalings), but i'm going to point out the one's who can really make some havoc and productive effect for the everyday user.
["Smartass v2"]: Is the balance between Battery Duration and Performance.
["Performance"]: Gets the most response as possible.
["Conservative"]: Usefull whenever you need to use your device for longer periods, and/or when you don't have a charger nearby for a long time.
"Setting up CPU Master Pro" Profiles
Open the app Go to Profiles Tab:
The Profiles bellow are the ones who can save some severe battery duration.
Set these profiles "Screen Off" and "In Call"
"Screen Off"
Min Freq: 300 Mhz
Max Freq: 300 Mhz
Scaling: "Conservative" or "Smartass v2"
Note: If you need your device to wake up faster change Max Freq. to: 600 or 800 Mhz.
Both work pretty well, they just differ on battery duration and wake up response.
"In Call"
Min. Freq.: 600 Mhz
Max. Freq.: 600 Mhz
Note: If you go Bellow 600Mhz you may end up in making a longer phone call since your device wont respont so fast. (Usually Lagging)
- Memmory Manager (JRummy) (Partially Free)
- Open the Application and set it to "Moderate" (Higher Values can Crash the System).
- Set it to "Apply on Boot"
Note: The after this i never had the "Full Ram Bug (Crash and Restart) issue anymore."
Note: This application has more usefull features although under the paid version only.
Either way you will notice a better performance just by changing to Moderate.
[OTHER] Script to Increase Battery Duration
Info: This thread bellow will something similar to the CPU Master Pro Profiles.
If you cannot find a better solution for CPU Master Pro Application, then you might want to try this. (Follow the thread link bellow)
Original Thread: http://forum.xda-developers.com/showthread.php?t=2371715
Extended thanks for the pdf format.
Keep it up.
No worries.
Im glad i could help. :thumbup:
Sent from my GT-I9003 using XDA Free mobile app
Thank!
hi rgxHost,
i help my wife to upgrade to XXLE4 (Straight from Froyo) and stuck without rooting the phone (flashed but with wifi error).
she encounters video playback problem (not as smooth as Froyo, some ugly scene transitions).
i want to go back to Froyo, but could not find any installation files anymore (all dead links).
i guess i will try to mess with DDLF2.
Thanks for the guide.
Hello,
Im very sorry for repplying just now.
Within so many threads, I completely lost track on this one.
Links from Sammobile are usually dead, but if you ask them they make the links alive for you.
Froyo is not what you're Looking for due to compatibilities. (Applications, Performance, Bugs, etc).
for Performance:
DDLF2 Properly Tweaked, will give you tons of battery duration, device performance, but lacking the use of newer applications.
Custom Rom will do the Opposite. If you go for a Custom Rom.
Go for Nameless Rom. But make a variety of "efs" Backups. To prevent imei losses.
If you Experience YouTube crashes on DDLF2:
1) Root your device;
2) Install ES File Explorer;
3) Under the menu Click, "Root Explorer"; and make "/" and "system" re-writable. ("rw").
4) Go to the Following Path:
/system/framework or /system/apps
5) Long Press YouTube Icon (So you can select: "Uninstall"). Fully Uninstall YouTube (All Installdd Versions).
6) Set the File Explorerto Read Only Again and Restart the Device.
7) Install YouTube from Google Play and You are Good to Go.
Note:
If you still have issues there's a slight chance that your Custom Kernel could be causing such Issue.
Simply Flash a Different Custom Kernel for your Device. (i9003)
ok successfully flashed without CSC (DDLF2) 'cause i was not able to extract CSC file.
ROM works very good. I think it is faster then CM11 I had before.
is there any sense to flash XWKPG or XXKPE? what for? I have my native language on DDLF2 and Region settings so..
could You give me some piece of theory?
Thanks hitten to the OP!
---------- Post added at 12:18 AM ---------- Previous post was at 12:11 AM ----------
one more question..
Is it necessary to deodex this rom to gain ability to remove bloatware?
I didn't do so on the other devices before (they were newer ones) - only root and Solid Explorer with root rights.
All download links are dead...
Download:
- cRom1.4.1
- parameter (MANDATORY: change in folder /rockdev)
- kernel_Prestigio7079D(orginal) (MANDATORY: change in folder /rockdev/Image)
- final_fix_with_rotation (copy this patch to external sdcard) (fix also rotation_bug)
Instalation:
- Run RKAndroidTool,
- switch off tablet, push vol+ and connect it to PC
- after install drivers RKAndroid see tablet
- choose parameter (/rockdev), misc,kernel,boot,recovery,system (/rockdev/Image),
- "EraseIDB" and then "Run"
- after instalation tablet automatic go in CWM mode
- in CWM make "wipe data/factory reset" and install final_fix from sdcard ( install zip from sdcard->choose zip from external sdcard) then choose "reboot system now"
Overclocking memory:
You can use this kernel with overclocked memory to 528Mhz
kernel_528
Improve mali performance:
Unpack and copy userinit.sh to /data/local and change permissions to 775 (rwxrwxr-x) and reboot (or simply run this script)
user_init.zip
---
Source Crew RKTablets
Thx for OMA
I have same tablet prestigio pmp707d_quad and want to flash this rom. Can't play normaly real racing 3. I found officialy rom on prestigio page named PMP7079E_QUAD. Can i safely flash that rom because tablet is pmp7079d. i want to have backup before playing with oc.
sorry for bad English.
thanks
After flashing this rom, my tablet stuck on omni boot animation. I changed parameter, kernel, and i get 2 messages after pressing reboot in cwm recovery. First is about recovery, other is about root, should i press yes or no?
Hello guys. I have one question. I Have the pmp7079d quad prestigio diamond 7.85 full stock.
Now my question is it says that i have to boot in cwm, but i have the default one how do i get CWM?
and how to instal drivers in rktools for win7 x64
Well, thanks for nice ROM!
But still I have one issue with the rear camera. It works with the camera app, but if I use Cam Scanner app or Office Lens it captures a camera view as soon as I start an app and the camera view gets stuck. Also camera view seems to be tilted 90 degrees.
No idea how to fix it? The Cam Scanner app really helps me for studies capturing whiteboards and books.
P.S. I use this ROM on Prestigio PMP7079D.
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 Edge Stock to Android 13
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 Edge (hero2lte Exynos SOC) Stock to Android 13 / LineageOS 20
Supported models
International & Canada:
- SM-G935F
- SM-G935FD
- SM-G935X
- SM-G935W8
Korea:
- SM-G935S
- SM-G935K
- SM-G935L
This detailed step-by-step guide helps you transform your Samsung Galaxy S7 Edge hero2lte to a powerful one with Android 13.
Make sure your phone is hero2lte/Exynos SOC before going further: in Android, go to Settings > About phone > Check Model number is listed above.
If not, quit this tutorial.
### READ THOSE WARNING COMMENTS
CHANGELOG
v5. Back to TWRP 3.6 (3.7 oversize)
v4. Android 13, TWRP 3.7
v3. BitGApps v1, Magisk 25.2
v2. Update TWRP, add adb to change screen definition, update download link
v1. Initial release for Android 12
1) DOWNLOAD
- djibe Galaxy S7 hero2lte pack: https://bit.ly/djibe-galaxys7edge-pack
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.6.2_9-0 official recovery + Magisk Root + adb.exe). Unzip files.
+ ROM Unofficial LineageOS 20: https://forum.xda-developers.com/t/...ofing-ota-updates-for-s7-edge-exynos.4484511/
Download latest build: https://ivanmeler.github.io/devices/hero2lte.html
+ BiTGApps Package ARM64 13: https://github.com/BiTGApps/BiTGApps-Release/releases
OR NikGApps T Basic: https://sourceforge.net/projects/nikgapps/files/Canary-Releases/NikGapps-T/
OR MindTheGApps 13 ARM64: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
+ Charge phone to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > About device > Software update > Update now
### BACKUP NOW, you will lose everything.
3) FLASH TWRP 3.7 RECOVERY
Go to Settings > About phone> Software information.
Tap 7 times on Build number item to unlock Developer options.
Go to Settings > Developer options, switch OEM unlock ON and Confirm.
Shutdown phone.
Boot in Download Mode: hold Home + Power + Volume- until you see blue-green Warning screen and release buttons.
Confirm access to Download mode by pressing Volume+.
Phone now displays "Downloading..., Do not turn off target".
Connect phone in USB, wait for drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select twrp-3.6.2_9-0-hero2lte.img.tar
### Same recovery for Korean models (G930S/K/L variants)
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug phone.
Restart phone to recovery :
- hold Power + Home + Volume- until phone screen becomes black...
- and immediatly switch from Volume- to Volume+ (still holding Power + Home) and hold until Samsung's logo is displayed to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP IMEI PARTITION AND SYSTEM (Nandroid backup)
(Boot in Recovery Mode: Hold Home + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot)
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
Select at least EFS partition to backup your IMEI. If a flash fails and partition is damaged you will still be able to restore this partition and use the phone.
If IMEI is lost during a flash, phone won't be able to reach cellphone networks.
I prefer to backup Boot, System, Baseband and EFS partitions. In case of problem, you will have your phone in its original state.
Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
Save backup: still under TWRP recovery, connect phone to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access phones memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik, Cache, System, Data, Internal Storage (if you really made a backup at step 2), then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
6) FLASH ROM, (MAGISK ROOT) AND GAPPS
Back to TWRP main menu, go to Mount menu again to connect phone to PC again.
Connect phone to PC and use Windows explorer to copy files on phone's internal memory.
Copy TWRP folder from your phone to somewhere safe on PC.
This backup can restore your phone to its original Samsung state.
Copy files of ROM + BitGApps + Magisk on phone.
Go back to TWRP Home menu. Then tap on Install > choose lineage*.zip,
Optional for root: Add More zips > Magisk*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Go to Reboot > Recovery and swipe to reboot.
After restart, go to Install, select bitgapps*.zip and swipe to flash.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System and on Install TWRP App? menu, tap on button Do Not Install
Wait for the phone to boot during 5 minutes.
7) ROOT ACCESS
Configure Android as you like.
Don't try to set fingerprints at first setup. It will crash.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
8) TWEAKS
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%
Settings > Display > Dark theme.
- For better battery, remove Always on display
Settings > Display > Lock screen > Ambient display
- Activate Developer options
Go to Settings > About.
At bottom, tap 7 times on Build number. You activated Developer options.
Go to Settings > System > Advanced > Developer options.
- Change screen definition for low GPU/CPU usage: from 1440x2560 to 1080x1920
You need developer options to enable USB debugging.
Open a terminal where adb.exe from my pack is located.
Plug phone and Authorize USB debugging.
Then type:
Code:
adb shell wm size 1080x1920 && adb shell wm density 400
// Defaults 1440x2560 and 504
- Screen sensitivity is too low ?
Try to recalibrate screen sensitivity with https://play.google.com/store/apps/details?id=touchcalibration.favoritappindia&hl=en&gl=US
Enjoy,
djibe
Thanks: @Ivan_Meler, LineageOS team, TWRP team, TopJohnWu
---------------------------------------
Coming from another ROM
- Backup
- Recovery: Wipe Cache, Dalvik cache, System and Format Data > yes
- Reboot recovery
- Flash rom
- Reboot recovery
- Flash BitGApps
Enjoy
Force Samsung Galaxy S7 restart
Hold Power + Volume down for 10-20 seconds
Thanks for the detailed instructions.
Please fix two minor typos: In the Odin instructions, the files should be hero2lte* not herolte*.
Re Magisk: 24.0, I suppose, should be used / upgraded to. (I've run into issues with 24.2 on another platform.)
steve8x8 said:
Thanks for the detailed instructions.
Please fix two minor typos: In the Odin instructions, the files should be hero2lte* not herolte*.
Re Magisk: 24.0, I suppose, should be used / upgraded to. (I've run into issues with 24.2 on another platform.)
Click to expand...
Click to collapse
Hi, you are correct and I'll fix glitch.
For Magisk, as you report bugs, I'll wait to move to 24.x. You can create an Issue here: https://github.com/topjohnwu/Magisk/issues
Thanks for sharing
I have a problemi instaled twrp format data and and instal rom after configuration rom when i rebooting to twrp data is encrypted. why ?
zulwik said:
I have a problemi instaled twrp format data and and instal rom after configuration rom when i rebooting to twrp data is encrypted. why ?
Click to expand...
Click to collapse
Hi, did you Format Data then Advanced Wipe > Format Cache, System ?
Then
Reboot to Recovery
Flash ROM
Reboot to recovery
Flash BitGapps
Reboot
I solved problem.
I installed older version TWRP with Odin and new version
hey @djibe89 & other XDA folks, thanks for these steps.
I have a SMG935W8 and currently borked on the BiTGApps step. All proceeded smoothly until there and now I'm seeing an error on TWRP and I'm not really sure how to resolve it.
It's complaining that the install config is not found and that it's an unsupported Android SDK version, which doesn't seem quite right.
Any tips would be highly appreciated
Judging from my deep dive, the current LineageOS 19.1 builds are SDK 32, and the BiTGapps builds only support up to 31... Definitely looking for tips, still.
Going to try this post's GApps
Hi, for now, stick to latest LOS 19 build: https://github.com/ivanmeler/ota_provider/releases/tag/herolte_lineage-19.0_1646935359, not 19.1
Or could you try NikGapps and tell us?
Thanks @djibe89 ! I went with NikGapps and that was a win.
It might be good to edit the top post to say 19.0 or have the NikGapps linked in it, for future readers.
Phone's working great. I appreciate it!
Bujiraso said:
Thanks @djibe89 ! I went with NikGapps and that was a win.
It might be good to edit the top post to say 19.0 or have the NikGapps linked in it, for future readers.
Phone's working great. I appreciate it!
Click to expand...
Click to collapse
Hi, I'll update it.
I hoped a newer BitGapps update would be released by now.
Enjoy, this phone is awesome
Hey again!
Been daily driving this for a bit and here's a laundry list of the issues I see, in no order at all.
I'm not sure if they're Lineage issues or artifacts of being an "unsupported" Lineage build.
1. The screen just stays on despite the power save settings (I've tried 15s, 30s, you name it) if I'm on the home screen. Trebuchet, is it?
It's like it has some keep alive function a la YouTube. It's not 100% but it seems far more than 50% of the time that I have to manually lock the device. Anyone know if I've just configured something wrong or if this is how the launcher is supposed to work?
2. Phone services will not stop demanding my location, no matter what I configure. It's every few minutes and it's creeping me out a ton. Why is it so nosey?
3. The call audio quality is still barely usable. While I *can* have intelligible business conversations when required, they suffer the quality noticeably and are terribly robotic and tinny. For personal calls, I tried to play it off once but immediately was laughed out of the call: they asked before even a "how are you" could pass if we could switch to VoIP since it was so comically bad. After some kind tips from Ivan I tried mucking with the mixer levels to no avail. They did seem a bit "low" compared to the 18.1/19.0 values, so I pumped them in a couple places (NB volume from 22 to 32, call default volume on 917 from 98 to 164 -- I have no clue what any of these mean). It might be louder now? It's not worth an A/B test to confirm what should be the expectation, but my point is that it didn't fix the robotic, tinny quality.
4. Banking app complains of the device being rooted, but it isn't. "Great." I hear the latest Zygisk might fix? I haven't tried yet.
Now, I'm still excited to be on 12L! I'm trying to buff my ability to dev on this ROM and fix up some of these issues, as I really don't think this phone needs to be replaced yet, but being stuck on stock Oreo isn't working either, so I say let's hack this thing till it's stable as stock!
Hi @Bujiraso , thanks for sharing.
Didn't use it on a daily basis
Have you tried another launcher ?
I think bank apps detect custom ROM, nothing can be done. Hope I'm wrong. Some genius of signature spoofing can pass this I believe. But I'm not.
djibe89 said:
- To tweak overclocking and more, use SmartPack-Kernel Manager
SmartPack-Kernel Manager - Apps on Google Play
The ultimate tool to manage your kernel
play.google.com
Enjoy,
djibe
Click to expand...
Click to collapse
We're sorry, the requested URL was not found on this server. New Link please.
SERGE4NT said:
We're sorry, the requested URL was not found on this server. New Link please.
Click to expand...
Click to collapse
Hi, you can try https://play.google.com/store/apps/details?id=com.performancetweaker.app or https://f-droid.org/repo/com.smartpack.kernelmanager_174.apk
hi, is it possible for the model number SM-G9350
Klein44 said:
hi, is it possible for the model number SM-G9350
Click to expand...
Click to collapse
Hi, sadly no.
9350 and 9300 have Snapdragon SOCs, not Exynos.
Only Android 8 ROMs: https://forum.xda-developers.com/f/samsung-galaxy-s7-edge-snapdragon-roms-kernels.5975/
Oh, ok. And is there any good custom rom for the SM-G9350 model?
Klein44 said:
Oh, ok. And is there any good custom rom for the SM-G9350 model?
Click to expand...
Click to collapse
Like you see here: https://forum.xda-developers.com/f/samsung-galaxy-s7-edge-snapdragon-roms-kernels.5975/
No.
This happens with Qualcomm proprietary SOCs