Hi! When I flashed cog 2.3b6 I had 0 problems with beautiful widget data. But after a recovery reboot I lost every data of Beautiful Wid. Anyone have any idea to avoid this? Thanks.
Sent from my Samsung Captivate @ Puerto Rico
Well known problem, using search tool you would have found this out through the Cognition thread.
Related
I am trying to install the SHOWCASE EB11 - Cellular South Froyo Update and every time it loads the modem.bin it fails. I have even tried to load EB16 Mesmerize Odin & Pick-n-Pack ROM and having the same issue.
Anyone have any solutions or suggestions for this?
Thanks
lacknothing said:
I am trying to install the SHOWCASE EB11 - Cellular South Froyo Update and every time it loads the modem.bin it fails. I have even tried to load EB16 Mesmerize Odin & Pick-n-Pack ROM and having the same issue.
Anyone have any solutions or suggestions for this?
Thanks
Click to expand...
Click to collapse
Why are you trying to load both a mes and showcase file?
Sent from my SCH-I500 using XDA App
Well I tried the showcase ROM and it fail so I just tried the mes ROM to see of it would work.
I was just wondering if there was a way to totally scratch the device like you can a blackberry with jl_cmder?
Sent from my SCH-I500 using XDA App
lacknothing said:
Well I tried the showcase ROM and it fail so I just tried the mes ROM to see of it would work.
I was just wondering if there was a way to totally scratch the device like you can a blackberry with jl_cmder?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
There are no odin files to reset back to stock for the showcase yet. This is why it is stressed that you read before you do anything. I'm sure one of the devs can attempt to help you out but this takes away from them being able to create new things.
Oh its no big deal, the device I bricked wasn't the device I use. It was an extra one I use as a guinea pig. Was just wondering if there was a way to fix it.
Sent from my SCH-I500 using XDA App
Is there a way to just scratch the phone or just format it completely?
Sent from my SCH-I500 using XDA App
You might be able to use odin files for the Mesmerize to at least get it working.
Sent from my SCH-I500 using Tapatalk
lacknothing
Did you have any luck getting your showcase to get past the modem bin load?
dphoneguy said:
Did you have any luck getting your showcase to get past the modem bin load?
Click to expand...
Click to collapse
Nice job, you managed to revive a 4 month old thread.
Sent from my Showcase running MIUI 1.7.1.
Masta Of Evil said:
Nice job, you managed to revive a 4 month old thread.
Sent from my Showcase running MIUI 1.7.1.
Click to expand...
Click to collapse
Is that a problem?
Yeah when the guy's only four posts are in this thread so he clearly doesn't come around and probably isn't going to answer your question.
It was worth a try.
Ok, first off, i'm pretty sure this is all my fault, i recently rooted my mez and everything was great was running the h57 rom and was happy, then i was shown the cm7 mod and of course wanted to try it, no problems with the flashing it loaded up, but i had no internet etc. so i decided to go back now i thought i followed the steps properly(obviously i was wrong) but when i got back to h57 the only way i had a network was to roam, now i'm back to the stock build and still facing the same problem, any help would be appriciated
my searching found a similar thread but wasn't right
http://forum.xda-developers.com/showthread.php?t=715477
Odin back to stoc ec10 without repartion checked. Then flash heinz 57. Also after it installs fine do a *228
Sent from my SCH-I500 using XDA App
Thanks, will try this when I get home
Sent from my SCH-I500 using XDA Premium App
stephenj37826 said:
Odin back to stoc ec10 without repartion checked. Then flash heinz 57. Also after it installs fine do a *228
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
well i did all this and i am still on roaming any other ideas, if more information is needed i'd be happy to provide it if i know where to find it
I had a similar problem on my csouth showcase. This video made by dfgas shows how to fix it. Great fix. These devs on here are the best.
http://forum.xda-developers.com/showthread.php?t=1028298
thank you thank you thank you! i didnt see this at all perhaps i just didnt go back far enough
I am having some major 3G issues with CM7, I tried using baseband switcher with each US setting (NOT SOLVED). Wiped, Installed UK 3.4.3 Stock SBF. then proceeded to upgrade to RC1, data works.... OK. But 3G speed is SOOOOOO slow...
takes 5mins to download applications...
Before RC1 update, downloads were running really fast!!
Question??
Is my data slow because i live in USA and used the UK 3.4.3 Stock SBF. file as base file for upgrade?
Is anyone else having this same problem?, If so... Please add input so we can get this problem fixed.--------- If you have fixed, please list steps taken to fix this issue.
Is there a APK. file i can download to monitor Network speeds?
Stock US T-Mobile Baseband? link? kernel issue causing 3G network issue?
Please contribute to this thread to assure that this problem is solved, I would appreciate it very much... Thanks in Advance to ANY/ALL input
ATXiceman512
I did experienced data connectivity problems in cm7 beta 6, but in cm7rc1v2, not yet, although you can say it is slow, but downloading an app for 5min, never experienced it. How big was the app? the only problem I have with data is that 3g sucks a lot of battery. Can drain phone for half a day and 2g is like having no data at all. Using nordic sbf baseband tmob usa .9, location usa. Check if you have good signal/reception.
Sent from my MB525 using XDA App
What the ****, does anyone here ever ****in help some1
Sent from my MB525 using XDA Premium App
ATXiceman512 said:
What the ****, does anyone here ever ****in help some1
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
Why don't use Nordic sbf or usa T-Mobile sbf as base then install cm7
Sent from my MB526 using XDA Premium App
Hi everyone,
I have been using the F1 Galaxy nexus rom on my Galaxy s2 and have had a problem with it freezing on me a couple of times.
Today I finished making a Skype call and the phone froze as I tried to pull down the notification bar. It just sort of hung halfway down. After that it pretty much froze up apart from the fact that I was able to power off using the power button.
I am wondering if I have the right Clockworkmod recovery on my phone. I installed recently CF-Root XX_XEO-LPQ v5.4 as previously I tried out the official samsung Ics ROM XX_LPQ.
After this I flashed the nexus f1 rom using the same version of clockworkmod.
Can anyone advise me if this is the correct one to use to flash the nexus f1 rom or is there another version that is more compatible with this rom. I have read that you need the correct kenel to match your phone's firmware and that certain kernels down't work with certain roms.
Please excuse my general ignorance. I have tried searching for an answer on the forum but couldn't find what I was looking for
I have included a screenshot of my phone's settings if that helps
Just a quick question, did you factory reset after flashing?
Yes I did a clean wipe and factory reset before flashing the F1 From. To be honest 99 per cent of the time it runs just great. But it does have the occasional freeze
Sent from my GT-I9100 using XDA
seancyril said:
Yes I did a clean wipe and factory reset before flashing the F1 From. To be honest 99 per cent of the time it runs just great. But it does have the occasional freeze
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I don't know what to say then. It is recommended to factory-reset after flashing new roms, and I would suggest you to do this if you haven't.
Anyway you can ask in the SGS2 development forum, I'm sure there is a thread for that ROM, and there might be more people experiencing that issue posting there.
Good luck.
Has anyone had any problems using iheartradio on Synergyrom? I just moved from root66 to r50 and most recently to the r60 nightly and iheartradio custom stations put the app into a loading loop. The only way to get out is to kill the task with the home button. This only happens with custom created stations and not the live radio. I contacted iheartradio support and they couldn't assist. Ive tried removing and reinstalling the app and nothing helps. Stations work fine when listening online. Ive also deleted the custom stations and created new ones with no effects.
Has anyone else experienced this on Synergyrom and know of a fix? I've looked through the forum and cant find any answers there nor can I post since I'm a new user. Any help would be awesome!
drei1023 said:
Has anyone had any problems using iheartradio on Synergyrom? I just moved from root66 to r50 and most recently to the r60 nightly and iheartradio custom stations put the app into a loading loop. The only way to get out is to kill the task with the home button. This only happens with custom created stations and not the live radio. I contacted iheartradio support and they couldn't assist. Ive tried removing and reinstalling the app and nothing helps. Stations work fine when listening online. Ive also deleted the custom stations and created new ones with no effects.
Has anyone else experienced this on Synergyrom and know of a fix? I've looked through the forum and cant find any answers there nor can I post since I'm a new user. Any help would be awesome!
Click to expand...
Click to collapse
Just downloaded today and haven't had any problems...on r60 tho
kowen14 said:
Just downloaded today and haven't had any problems...on r60 tho
Click to expand...
Click to collapse
Can you let me know if you did a clean wipe and flash or a dirty flash over a previous version? I dirty flashed r60 over r50 and haven't had any issues with anything else other than iheartradio?
Know this might not help now but just noticed that you responded.. I always do a clean install.. Wipe cache and dalvik and factory reset
Sent from my SCH-I535 using xda premium
kowen14 said:
Know this might not help now but just noticed that you responded.. I always do a clean install.. Wipe cache and dalvik and factory reset
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks for the reply. I got it working with a work around. Im still having issues, on R72 now, but it works more or less. I have to start a live station, then hit stop, and then run on of my custom stations and it works without issue from then on out.