Finally full Arabic Android for HTC Desire HD - Desire HD Android Development

Hi Guys
Finally A new Arabization for the newly released device from HTC, Desire HD
It is also compatible with ROM ported from Desire HD to HTC Desire
Lib Files http://www.mediafire.com/?vdhfc5obhpthd30
all the credits to Aymen Sanad http://ardoid.com/
enjoy
we need to push the lib file by the Recovery mode
but i think till now we dont have full access for the recovery mode
we can puch the Lib files by adb
so we need help from our develper to do it
thanks

طيب كيف نثبته في الاتش دي ديزاير ؟؟

Please provide translation in English
Cheers,
M_T_M

taif said:
طيب كيف نثبته في الاتش دي ديزاير ؟؟
Click to expand...
Click to collapse
In English
translate how we can intallit to DHD

Push the libs to /system/lib/
Swiped from my LeeDrOiD loaded HTC Desire using my thumb....

LeeDroid said:
Push the libs to /system/lib/
Swiped from my LeeDrOiD loaded HTC Desire using my thumb....
Click to expand...
Click to collapse
would it overwrite the original files? if so how to revert it?

its for the normal desire not desire HD.
But I will experiment with it and give a full guide soon
Thanks
Update...
only tried copying libwebcore.so
attempt number 1 failed trying to factory rest now..
Factory rest failed !!
Warning Don't try to copy lib files!
trying to know if i bricked my phone or should i re-flash stock ROM
these files are NOT for DHD and they could harm your phone and if you already did copy them and your phone wont boot download the attachment from this post then follow this guide

some1 already installed it http://www.ce4arab.com/vb7/showpost.php?p=1989781&postcount=22 (Arabic language)
i have a question, do i need S-OFF to install this? (i'm not going to install it yet, just want to know).

Yes that is what i did, S-OFF and Clockwork MOD recovery. after that just push the zip file
the attached pics are from my Desire HD after doing what i mentioned above

BTW it's not full Arabic ... only read write capability in Arabic
title might sound deceptive

Ok soo frist post files are BAD! dont try!
but some one post it a new files here they are good
Download Here
1-you need permRoot and S-off
2-You need clockwork mod
3-Do a backup with clockwork mod just encase.
4-download file Arabic Android_Plus_libs_for_HTC_Desire_HD_Z_Sense_signed.zip then mount USB from CWM and copy / past from your computer into Sdcard.
5- unmount
6-install zip file from sdcard and chose
Arabic Android_Plus_libs_for_HTC_Desire_HD_Z_Sense_signed.zip
7-go back and reboot
this should enable writing/reading arabic right to left and everything you need
Credits gos to Ibraheeeem from http://www.ce4arab.com

thanks
that is nise i test it
it work good but some problem
1-delay in boot up
2-message sort has problem

help for Arabic Support on htc Legend
sorry for bad English
I want arabic support for hc legend froyo
froyo has Arabic font but this font not connectend
Sent massage connected and inbox massage Separately
This is a Atabic fix for desire , change libskia.so and framework.jar
http://rapidshare.com/files/426732840/Fars...Persianblue.zip
I change libskia.so , but not boot my legend
plese sign a fix for Arabic support for Arabian and persian Htc legend users
there are libs files of htc legend rom to sign Arabic fix
http://www.4shared.com/file/gaqfU-sL/mdj_Asli.html
sorry for bad place

Oh man, is there ANYway this can be ported to other devices like Samsung Captivate (Galaxy S variant) or Galaxy Tab??? That would be awesometastic.

Doesn't work with on htc desire hd with LeeDroid v.12 custom rom..after installation device failed to boot up. Had to restore with clockworkmod recovery...phewww...lucky recovery worked..

Works 100% for me, even on leedroid. When installed, the first boot up can take up to 2 minutes with a black screen (then every bootup afterwards is normal). To write in Arabic you will need to download an Arabic keyboard though.
Sent from my Desire HD using XDA App

prank1 said:
Works 100% for me, even on leedroid. When installed, the first boot up can take up to 2 minutes with a black screen (then every bootup afterwards is normal). To write in Arabic you will need to download an Arabic keyboard though.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You are absolutely right..I reinstalled the zip file and it worked...thank you very much bro.
Sent from my Desire HD using XDA App

Glad it worked bro

youtube search "htc desire hd arabic"
for those with weak english and GREAT PATIENCE to listen to 26 minutes on how to root your phone and make it able to read arabic, these links are the BOMB "great quality and literally the guy is going through every detail SLOWLY, you can sleep, wake up and miss NOTHING"
should help a lot if a step is unclear or so
i got my father's htc desire HD working perfectly with arabic fonts, was making spaces between letters and sometimes reversing numbers when switching from numbers to letters ... etc, i just wished for all the files needed to be collected in a zip file or something with some stupidly written text to have it done faster, collecting the files alone and downloading java, SDK ... etc .. took me around 90 minutes
clearly i need more posts to be able to paste links in here, may be someone with more posts can paste them and help the guys in here

Can't u use "more locale" to change language?

Related

[Updated 2011.02.26]MIUI ROM version 1.2.25 for Desire HD, flash successfully!

MIUI team has just officially released version 1.1.14 dedicate for Desire HD, no more porting from other platform needed. And it supports English, though the screenshot is in Chinese.
some screenshots attached.
more...
2011-02-26 update:
MIUI ROM version 1.2.25 for Desire HD
update: You can find the partial English UI setting instructions here.
But after setting the locale, most of the UI is remaining in Chinese. Need a developer to change the language file to English. The download link for ROM package is listed above.
How to flash
--------------------------------------------
1. Make sure your HBoot is already S-OFF.
2. Have clockwork recovery installed.
3. Copy the zip file to SD card and flash.
Please do a data wipe and cache wipe before flash the zip file. The whole process takes about 5 minutes and after the first Hboot screen, it loads to MIUI themed splash screen quickly.
Awesome!!! Awesome!!! Awesome!!!
yes yes yes!!!
So this is an official rom from miui?!? Oh my days awesome
Sent from my Desire HD using XDA App
yes, it was released by MIUI team just on Friday afternoon China Beijing time.
hope there will be a german language pack!
guhenry said:
update: I think we needn't the instructions for setting language to English, after setting the locale, most of the UI is remaining in Chinese. Need a developer to change the language file to English. The download link for ROM package is listed above.
Click to expand...
Click to collapse
Could you tell how to get it partially translated?
Great! Looking forward to trying this one. I'd rather have my own language available, but English will do just fine
Excuse my ignorance but how for you get it in English then
Sent from my Desire HD using XDA App
d tried build 1.1.7 was awsome except batter was sh**.....how is battery in this one?????
Can't download from the link provided. Always fails.
C0mpu13rFr34k said:
Could you tell how to get it partially translated?
Click to expand...
Click to collapse
Partial English setting instructions have been update to the main post, enjoy!
pravk said:
Can't download from the link provided. Always fails.
Click to expand...
Click to collapse
Anyone else failed to download?
I just jizzed in my pants
Never mind. Made it work using DAP.
nice and smooth. however no data connection... also as metioned only partially English. Will keep an eye out on this one.
Thanks
Data connection works for me. Wifi works too. And lot of chinese is managable too untill an en version is released.
Sent from my HTC Desire HD using XDA App
can someone explane me what is this MIUI? Is this rom like Cyanogen or soemthing like that?
sectorek said:
can someone explane me what is this MIUI? Is this rom like Cyanogen or soemthing like that?
Click to expand...
Click to collapse
MIUI is simply MIUI!
mingo_uk said:
nice and smooth. however no data connection... also as metioned only partially English. Will keep an eye out on this one.
Thanks
Click to expand...
Click to collapse
Same here, will keep an eye and try it in the future, wanted to stop in and add thanks to the guys behind this.

need the stock Chacha camera .apk

hello everyone!!!!
this is a request from me to all of you. can anyone of you, please provide the apk file of the camera app of Chacha???.....i am trying to port this...will be obliged if anyone of you can kindly provide me with the .apk
waiting eagerly....thanks in advance
If I could get it you could have it.
How would I extract it?
I'm not root (yet )
qbert456 said:
If I could get it you could have it.
How would I extract it?
I'm not root (yet )
Click to expand...
Click to collapse
first of all, i thank u for showing interest in my query. u gotta be rooted to copy the file.....
here is the procedure....root ur chacha, use a file maneger (i recommend root explorer), go to system folder and then to the app folder. search for the camera apk and copy it to your SD card
easy enough.
even if u port it from the stock rom , the app it wont install in custom rom , i tried it . i tried editing cm7 rom and adding htc camera , with fb chat , and live walpaper .it didnt install properly
I think in aptoide there's a camera app, totally clean, in case you can' get the original one. Cheers!
Sent from a potato
Ok, i might be completely off topic here but can I port the HTC camera.apk to CM7 to make the front camera work?
If you need the odex file just tell
http://db.tt/UyXR63yB
Sent from my HTC ChaCha A810e using xda premium

[Q] Port BootManager

I worked the last week very
hard on porting the BootManager
app to our phone but there is
still one big problem:
To boot from the sdcard the init.rc
file must be edited, (I attached the
CyanogenMod one and renamed it to
original_lg.rc)
I attached the edited and the original
file of the HTC DHD/Ace to show you what
must get edited.
Hope somebody can help-.
Greets
berni987654321 said:
I worked the last week very
hard on porting the BootManager
app to our phone but there is
still one big problem:
To boot from the sdcard the init.rc
file must be edited, (I attached the
CyanogenMod one)
I very sure that the editing
must be started on lline
I attached the edited and the original
file of the HTC DHD/Ace to show you what
must edited.
Hope somebody can help and tell me how
I must edit it or somebody could reup
it.
Greets
Click to expand...
Click to collapse
Really nobody???
Im not here to help unfortuantely i know nothing about thsi but i just hope some1 helps cause a boot manager would be awesome
Sent from my LG-P920 using xda premium
omg i'm sorry I just recognized that
uploaded the wrong htc files
i look if i can upload it again this day because i'm
not at home
I reuped the files
berni987654321 said:
I reuped the files
Click to expand...
Click to collapse
Will look into this when i have time..
Thanks this would be great!

[BOOTANIMATION][SGT7] Androids on Tron Bikes

Here is a cool Bootanimation -- I don't know who I should give credit to. I extracted it from Galaxy Note - TeamRocket ROM.
I just modified some loops at the end and change the pixel resolution setting to 600x1024 for our G-Tab.
If anyone knows who we should give credit to please post.
Enjoy.
Note: Thanks to Sir Otto, we have a shorter version. Go to his post for download link
http://forum.xda-developers.com/showpost.php?p=26798166&postcount=14
To change your bootanimation, you will need :
1. root access and Root Explorer, or CWM.
Method 1:
Simply go to /system/media, place the attached bootanimation.zip in the folder replacing the original one.
Note: Please don't forget to back up your old bootanimation just in case you don't like what you downloaded.
Method 2:
Flash zip file on 2nd post below (TronDroidBootanimation.zip) in CWM recovery mode.
Credits:
TeamRocket (Galaxy-Note ROM) -- I extracted from this rom.
ATGAdmin and Icy (Iconia A500) -- It w also the boot animation for his ROM
Sir Otto -- For editing it to make shorter version --Please hit the thanks button on his post!
CWM Flashable / Screenshots
Update: CWM flashable zip file; only work for non-stock ROM.
download below attached file to your sdcard,
reboot to CWM recovery,
flash the zip file,
Reboot.
Here are screenshots
This is very nice. Thanks!
Sent from my U20i, SK17i, GT-P1010 or something else entirely.
Thanks
This looks very cool on the old tab 7
My pleasure, but again any of you guys know who we should give credit to this beautiful boot animation, please let us know.
Please share if you have or know any cool boot animation. Thanks.
your Neo-Droid boot animation is very nice, but I have to say I'm going with this one, the Tron-Biker. Sorry bro.
There was a guy in the acer a500 and asus transformer prime forums that had this boot animation on his roms. He goes by the name ATGAdmin. He had the icylicious roms for those devices. Not sure if he is still on xda due to some disagreements he had with other developers and the mods.
dxwilliams40 said:
There was a guy in the acer a500 and asus transformer prime forums that had this boot animation on his roms. He goes by the name ATGAdmin. He had the icylicious roms for those devices. Not sure if he is still on xda due to some disagreements he had with other developers and the mods.
Click to expand...
Click to collapse
And what happened to him? I tracked him and he has not posted anything after 2nd of May. I can't post to any of his threads, and seems like whatever happened already deleted from the original thread.
Well there goes, at least partial credit (if it not the whole credit) goes to ATGAdmin and his Icylicious roms. Still not clear if he created the bootanimation or not but he used it about at the same time or a little earlier than TeamRocket for the Galaxy-NoteThanks for the info.
Excuse me, yappoe, but I found this boot animation quite long. Can I just remove some of the images in the zip folder in order to leave only the final part or would it cause terrible things like bricking my Galaxy Tab?
And if I manage to get it working, will you let me upload my "reduced" version here?
Sir Otto said:
Excuse me, yappoe, but I found this boot animation quite long. Can I just remove some of the images in the zip folder in order to leave only the final part or would it cause terrible things like bricking my Galaxy Tab?
And if I manage to get it working, will you let me upload my "reduced" version here?
Click to expand...
Click to collapse
It's not going to get your Tab bricked, but it might make the bootanimation not functional (blank boot animation). Maybe Mr. Yappoe kind enough to release a shorter version.
Sir Otto said:
Excuse me, yappoe, but I found this boot animation quite long. Can I just remove some of the images in the zip folder in order to leave only the final part or would it cause terrible things like bricking my Galaxy Tab?
And if I manage to get it working, will you let me upload my "reduced" version here?
Click to expand...
Click to collapse
Slyv3 is correct, it won't brick your Tab. At worst you will have blank animation. Yes you can post it here for the short version. Thanks.
Thank you, yappoe and slyv. I tried removing some images in the zip files and it worked.
Now unfortunately I have a slow connection, but I will upload it as soon as possible.
Sent from my GT-P1000 using XDA
Sir Otto said:
Thank you, yappoe and slyv. I tried removing some images in the zip files and it worked.
Now unfortunately I have a slow connection, but I will upload it as soon as possible.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Cool thanks. Please upload it at you convenience.
Here it is.
--------------------------
| http://db.tt/oeWEsu3o |
--------------------------
Sent from my GT-I9001 using XDA
I have tested these 2 roms and it works 100% with CM9 ICS 4.04 and AOKP 4.04 but when I try copying bootanimation.zip using root explorer with root access to a stock 2.3.5 or 2.3.6 gingerbread rom, it gives me a message that there is not enough space to copy this file. I have noticed that the stock rom does not have a bootanimation.zip file. Advise please. thanks
daatjie said:
I have tested these 2 roms and it works 100% with CM9 ICS 4.04 and AOKP 4.04 but when I try copying bootanimation.zip using root explorer with root access to a stock 2.3.5 or 2.3.6 gingerbread rom, it gives me a message that there is not enough space to copy this file. I have noticed that the stock rom does not have a bootanimation.zip file. Advise please. thanks
Click to expand...
Click to collapse
--------------------------------
Hi, in stock firmware, there won't be a bootanimation.zip. There will be "samsungbootloop.qmg".
If the original version is too big, can you try the shorter version by Sir Otto above and see if you can put it in?
Sir Otto said:
Here it is.
--------------------------
| http://db.tt/oeWEsu3o |
--------------------------
Sent from my GT-I9001 using XDA
Click to expand...
Click to collapse
The shorter version neat. Dowbloading now. Thx bro.
yappoe said:
--------------------------------
Hi, in stock firmware, there won't be a bootanimation.zip. There will be "samsungbootloop.qmg".
If the original version is too big, can you try the shorter version by Sir Otto above and see if you can put it in?
Click to expand...
Click to collapse
ok downloaded now. will test and get back to you. thanks for the short version guys
Thank you. Let me know if it works, please.
Sent from my GT-I9001 using XDA
Well short version works 100% on Aokp and cm9 custom roms . It would be nice if we had a bootanimation for a stock 2.3.5 rom, but great work though.
Sent from my GT-P1000 using xda premium

[MOD] Samsung Stock Chinese Input Method Note 2, Note 1, S III

For those interested in transporting/installing the stock sammy Jelly Bean traditional chinese input method from the note 2, here are the instructions:
1) extract the following files from any Hong Kong rom: (you can get it from sammobile.com)
/system/app/SamsungChineseIME_HKTW_Phone.apk
/system/lib/libjni_secime.so
2) copy the files to their respective locations on your rooted note 2, set permissions rw-r--r--, and reboot
This comes in handy when trying out roms without T-Chinese input
here is a public dropbox link I have included for those who want it (** SLOW...no funds for hosting **)
enjoy
Edit: well it looks like I hit the limit with dropbox and got banned so no more link. if you still want the files PM me and i can email them to you. otherwise just extract them from the roms from sammobile.com
Additionally, here are the files needed for the S III and Note 1 phones:
S3 ICS
/system/app/SamsungChineseIME_HKTW_Phone.apk
/system/lib/libjni_secime.so
/system/lib/libhsvtest.so
/system/lib/libgdhwr2.so
/system/lib/libDioSpeechTTS-jni.so
/system/lib/libDioDict3HangulCore.so
/system/lib/libDioDict3EngineNative.so
Note 1 GB/ICS
GB:
- /system/app/diopenchineseIME.apk
- /system/lib/libdhwrcn.so
- /system/lib/libdwpcn.so
- /system/lib/libhangulcore.so
- /system/lib/libkeyboardcn.so
ICS:
/system/app/SamsungChineseIME.apk
/system/lib/libjni_secime.so
Remember to set permissions after copying the files back to your phone
Thanks man
But just a hint dropbox hasnt proven itself to be very good for xda-hosting. Big download traffic causes Dropbox to ban you
Wait a second i'll make you a dropbox mirror too sp that load is shared 50-50
EDIT: here's the link CHEERS!
http://db.tt/11AnZoJ7
You may add it to the OP
Why bother, just go to settings language click on samsung keyboard and just download the input method.
Sent from my GT-N7100 using XDA Premium HD app
lorinkundert said:
Why bother, just go to settings language click on samsung keyboard and just download the input method.
Sent from my GT-N7100 using XDA Premium HD app
Click to expand...
Click to collapse
The standard samsungIME included with non chinese roms does not have the T-Chinese and Handwritten chinese input methods. You need to have the samsungChineseIME apk for these languages.
Does it work in Quick Command? I'm on Wanam's rom and flashed his patch and got the same Chinese IME, works everywhere else except in Quick Command, Original keyboard stays there instead of the ChineseIME as in HK ROM.
im on the UK LJ1 rom and its working in Quick Command
i never try to put a file in system folder before.
can someone teach me how to move the file to system/app ? (rooted phone)
i use es explorer . it say . cant be copy..
i try to change system... read. write .execute. .. "permission failed "
make sure your note 2 is rooted. without root you will not be able to make these changes.
here are some links for rooting your phone:
chenglu's root with cwm recovery:
http://forum.xda-developers.com/showthread.php?t=1901196
chainfire's root with stock recovery:
http://forum.xda-developers.com/showthread.php?t=1933542
drketan's with clear instructions
http://forum.xda-developers.com/showthread.php?t=1896696
this is all under the note 2 original android development forum
good luck
thanks for reply.
i found out i didnt click " mount file system" then later i change the permission on the 2 file.
is working now. this samsung keyboard is abit diff.(hk rom)
can i ask if u have the stock samsung keyboard with chinese hardwriting support?
Hey thanks for the mod. I pushed the 2 files into their respective folders and rebooted the phone but couldn't find the new input method.. any suggestions?
Edit: it appears on the input setting after a second reboot but its FC'ing when I clicked on it=(
ahyin said:
thanks for reply.
i found out i didnt click " mount file system" then later i change the permission on the 2 file.
is working now. this samsung keyboard is abit diff.(hk rom)
can i ask if u have the stock samsung keyboard with chinese hardwriting support?
Click to expand...
Click to collapse
I do have the stock samsung keyboard with chinese handwritting support. Thats what the SamsungChineseIME_HKTW_Phone.apk file is
sckc23 said:
Hey thanks for the mod. I pushed the 2 files into their respective folders and rebooted the phone but couldn't find the new input method.. any suggestions?
Edit: it appears on the input setting after a second reboot but its FC'ing when I clicked on it=(
Click to expand...
Click to collapse
make sure to set permissions on both the library file and the apk file.
permissions should be:
/system/app/SamsungChineseIME_HKTW_Phone.apk rw-r--r--
/system/lib/libjni_secime.so rw-r--r--
hocgwai said:
make sure to set permissions on both the library file and the apk file.
permissions should be:
/system/app/SamsungChineseIME_HKTW_Phone.apk rw-r--r--
/system/lib/libjni_secime.so rw-r--r--
Click to expand...
Click to collapse
Cheers mate. Works great now after changing the permissions.
Finally I can flash custom rom. It's works great on Omega ROM, but QuickCommand doesn't support T-Chinese input. Any idea how to add back ZH(HK) in QuickCommand? Tks in advance.
eric1029 said:
Finally I can flash custom rom. It's works great on Omega ROM, but QuickCommand doesn't support T-Chinese input. Any idea how to add back ZH(HK) in QuickCommand? Tks in advance.
Click to expand...
Click to collapse
I haven't tried omega rom yet but I'm running the stock uk LJ1 and, using this method, T-Chinese handwriting is working for me in quick command
edit: my mistake. I was reading quick command but thinking multi screen. quick command does not support Chinese input.
munkustrap said:
Does it work in Quick Command? I'm on Wanam's rom and flashed his patch and got the same Chinese IME, works everywhere else except in Quick Command, Original keyboard stays there instead of the ChineseIME as in HK ROM.
Click to expand...
Click to collapse
Not a really good solution but works for me. Download the HK CSC image and flash via Odin. Then you can switch ZH(HK) in quick command function but the disadvantage is some of the bloatwares will restore from the CSC file. Remember to do a full wipe after flash the CSC image.
Does this trick work in the Original Galaxy Note?
Sent from my GT-N7000 using xda premium
stephencwl said:
Does this trick work in the Original Galaxy Note?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
basically yes. but you will have to use the chinese IME from an HK GB or ICS rom respective of your rom. Below are the files you will need:
GB:
- /system/app/diopenchineseIME.apk
- /system/lib/libdhwrcn.so
- /system/lib/libdwpcn.so
- /system/lib/libhangulcore.so
- /system/lib/libkeyboardcn.so
ICS:
/system/app/SamsungChineseIME.apk
/system/lib/libjni_secime.so
and remember to set the permissions.
hi guys
Can be used in the S3 ??
Thanks. I am going to try this on my note with Crash Rom.
Edit:
It works in Note 1!
But IMO it's not as good as the original HK IME in Note 1. Can't swap between Handwriting, Chinese Keyboard AND English Keyboard on the go without going into settings.
Do you have the HK IME in latest note 1 Rom?
Sorry, too lazy to download and extract. Just drop me a link in case you have the files at hand.
Anyway thanks!
Sent from my GT-N7000 using xda premium

Categories

Resources