Related
I've come to notice that no one REALLY knew how to fully disable screen rotation on WM devices.
Some offered 3rd party apps to get the job done, some only knew how to disable automatic rotation, but when the device went into standby and woke up again - the screen rotated back. So that didnt really work.
So if you're as desperate as i was about screen rotation,
this is what you need to do:
1. Get dotfred's free taskmanager HERE, and run it.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll)
3. Long-Tap on it, and tap on "Stop"
4. Long-Tap on it again, and now choose "Set Manual"
EDIT: This should be enough. try flipping your screen/sliding your keyboard and see if the screen changes orientation.
Now put your device on standby, and turn it on again. If orientation stays the same - you're done. If not - try steps 5-7, although they seem to be irrelevant.
5. Go to "Notifications" tab, and look for "Notifications\NamedEvents\VCPowerWakeupEvent"
6. Tap on it to make it selected
7. Disable it
(In dotfred's taskmanager, there should be a button for disabling it, but for some reason some devices couldn't see the button icons, although the buttons are still clickable. Under the notifications list there is an empty light-blue line - the buttons are there, eventough you can't see them.
The disable buttons is somewhere i the middle of that light-blue line, just tap the center until a message box popps up and asks if you'd like to disable this notification - Tap on yes.)All those steps are a one time deal - they stick even after an SR.
This has been tested on htc universal and works great.
The screen will keep its orientation even if you flip your screen, take out your built in keyboard, or turn the device off and back on.
The only time your screen will revert back to the original orientation is when you soft reset your device.
Hope this helps
So now, if you need something to help you rotate your screen on demand, you could use this small app that i've made.
its called ScreenRotate.exe (naturally), and you use it like this:
usage: ScreenRotate.exe <command line argument>
0 : Rotete to angle 0
90 : Rotete to angle 90
180 : Rotete to angle 180
270 : Rotete to angle 270
CW : Rotate clockwise
CCW : Rotate counter-clockwise
MIRROR : Mirror the current angle
If nothing will be specified at command line, nothing will happen.
.NET CF 2 is needed.
I really recommend using it along with FTouchFlo.
This way, to rotate the screen manually, you just need to drag your finger the way you want the screen to be shown, from top to bottom.
I find it quite comfortable while driving...
Those are the changes you'd need to change in FTouchFlo to make it work with ScreenRotate:
DownUpApp:\Program Files\FTouchFlo\ScreenRotate.exe
DownUpAppCmdLine:mirror
LeftRightApp:\Program Files\FTouchFlo\ScreenRotate.exe
LeftRightAppCmdLine:cw
RightLeftApp:\Program Files\FTouchFlo\ScreenRotate.exe
RightLeftAppCmdLine:ccw
Thank you so much... I have been looking for this for sooo long.
This is the perfec way to make it stick in either Portrait / Landscape.
There have been many users such as myself who have wanted our devices to stay in landscape and this is the perfect hack.
Thanks again... Cheers
BTW -> Tested and works on my Hermes
Just added it to the Hermes Wiki (Can be found under regisrty tweaks although it's not a reg tweak)
happy to hear that!
you're welcome mate.
I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again
zalaros said:
I have a tytn hermes with satin black and in the notifications tab there isn't any notification named "Notifications\NamedEvents\VCPowerWakeupEvent". I have searched in the notifications tab in task manager and also in the notification queue in memaid. So when i soft reset the device everything goes back where it was (auto rotate screen). Any help? Thank's
EDIT: It is working perfectly even without this notification. I just tested it. So everything OK! ThanX again
Click to expand...
Click to collapse
actually, you're right.
i guess the notification has nothing to do with it,
i don't remember what made me think it does.
i'll edit the hack accordingly.
thanx zalaros
Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?
Ok i found a way to reload this specific device (mis1).
1. Run taskmanager.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll) (it is unloaded if you have done everything described on the 1st post)
3. Long-Tap on it, and choose "Set Manual"
4. Long-Tap on it again, and choose "Set Automatic"
5. Soft reset your device
zalaros said:
Unfortunatelly I have found 2 bugs. I have a tytn hermes with black satin medium installed. The first bug is that with mis1 unloaded the device can not connect with the pc anymore. When I plug the device it is just being charged but active sync won't open at all. The second bug is that I can not load mis1 again. No matter what I have tried the device mis1 won't be loaded again if I had unloaded it. Any ideas?
Click to expand...
Click to collapse
I have the same syncing problem
Doesn't seem to work on my Tilt/Kaiser-Dutty 6.0..
Any other ideas?
redlynr said:
I have the same syncing problem
Click to expand...
Click to collapse
Just solved!
The ActiveSync troubleshooter (menu: Help/Troubleshooter for ActiveSync) offered to clear the "Enable advanced network functionality" check box. While trying to do that, an error message "Failed to disable RNDIS ..." was popping up every time. As per this suggestion, I removed virtual COM ports from Bluetooth settings and then it was possible to clear that check box.
Immediately thereafter ActiveSync woke up on the PC and offered to create a new partnership (because I deleted everything in frustration earlier). No problems for half a hour.
Then I left the administrator account and logged on as the usual limited user. ActiveSync again was unable to connect until the advanced functionality check box was restored. Does it seem that those both accounts will require different settings? Dunno, I haven't checked yet.
On my Wizard, with the TNT Rom (August 08), I don't see the device MIS1, and I don't see the event in the TaskManager.
Any ideas how to disable screen rotation, when I slide the keyboard?
Thanks in advance
Sprint HTC Touch Pro ROM 1.03.651.4
The MIS1 solution did not work for my phone (Sprint HTC Touch Pro ROM 1.03.651.4), but I found that this does:'
HKLM\System\GDI\Rotation\CamAppActive = 1
Presumably the device thinks the camera is active and thus doesn't rotate the display.
Obviously this will return to 0 after soft reset, so I used TaskMgr 2.9 to export the entry, then added a startup shortcut to import this entry with the /silent flag.
UPDATE: This fix interferes with data entry in Opera. When I try to type into a google search box, I get one character, the box looses focus, and I gotta tap on it again to type any more. Severely annoying. Goes back to normal when I change CamAppActive back to 0, and close and reopen the keyboard. I may make an exe to toggle or just make two reg import shortcuts.
Way cool!
Works for me too on a Kaiser, with old Dutty ROM.
How in the world did you figure it out? Look at that key?
Thanks, Jeff
It made perfect sense, but admittedly I tried changing everything under "Rotation" before I tried that one.
Item #21 on this list clued me into that area of the registry:
http://forum.xda-developers.com/showthread.php?t=398265
El Zilcho.
Bupkis. I've been knocking my brains out trying to disable autorotation, but still have manual enabled. (I've got some apps that play nice only in landscape, and some only like portrait. Also, I'd like to be able to slide my keyboard out really quick-like to enter some quick text, then slide it back w/o messing with screen orientation.) I tried the MIS1 disable, but no-go for me. Also tried messing with the Rotation entries, specifically the SlideKey key, but apparently that value is volatile and changes with each slide. Oh well! Unless there's a way to lock the SlideKey value so it can't be changed, that'd fix my issue. Hmm.
EDIT: Forgot to mention. I've got the Tilt (8900 I guess?) with vanilla OEM 6.1 ROM, modded only for no-bloat. (Did the old battery trick after reset/reinstall to prevent bloatware.)
EDIT: After I typed this up, figured I'd try using Settings>Screen (or somesuch) to just fix perspective. Still auto-rotates. KaiserTweak and Advanced Config can't get it to stick on one or the either, either. Editing registry turns up same results. Settings right now say it's fixed at 0 degrees but it still autorotates.
Late-breaking edit, 14-JUN-10: Got rid of it a few months ago anyways, moved to a Rhodium. No D-pad, so no more worries about those games that didn't like rotation, as they needed the D-pad to work anyways, and the TP2 doesn't have one.
Doesn't work on touch pro 2
http://forum.xda-developers.com/showthread.php?p=5928161#post5928161
That's what I resorted to!
Wow
Wow, pretty hard core fix! On the Sprint Touch Pro 2 Stock 6.1 my reg entry above only works to prevent rotation when the keyboard is slid out, it will not help with the autorotation provided by the sensor. I however put together some .reg files, with my perceived essential fixes including disabling sensor rotation:
http://forum.xda-developers.com/showthread.php?t=651166
So, following post 'step by step' didn't change anything with my screen rotation settings. still automatically rotates all the time when I don't want it too...really frustrating. This is about the 4th hack I've tried with no success. Does anyone know what the proper solution is for the HTC Rhodium? I'm running stock AT&T Tilt 2 Rom WM 6.5.
I know there are programs you can install to take over rotation control...I'm just looking for a reg change or service hack or something to stop auto rotate from ever happening.
Thanks to anyone who knows the answer!!
Hello,
I would like to change the multiline-capabilites key in HKLM/System/State/Phone to '1' in order to make the menus necessary to control the line for outgoing calls appear. Since the changes will only take effect after reboot, I have to do so. However, after reboot, the menus still do not appear, but the registry key is changed back to '0'. I guess this is due to the simcard, which does not have a valid CSP-entry for ALS. Is there any possibility to make the phone not check the CSP but just keep the entry I set manually?
Thanks,
Chris
They are probably changing back because they are built into the rom that way. Try a new rom if you really want to change it.
My screen goes crazy. During a call up to my ear it flips to horizontal, changes out of key pad view and not always to mute/speakerphone... keys view, sometimes to contact info, and can be a nightmare to get back to "end call." I've found times when the caller hung up but the TP2 put them on hold and kept my time going.
Any programs and or reg hacks to:
1) stop the horizontal flip when placed to an ear, and
2) keep it in keypad mode or general call mode?
Real pain when dialing into a system that requires keypad responses. Everytime I put it back to my ear I have to go through a crazy sequence to get back to the key pad.
This is my only complaint wth this phone, it's not easy to use as a phone!
Thanks.
I have the same problem when dialing into VM, or into any call queue. I looked through the registry a bit. Didn't see anything obviously labeled.
yeah me too. Only thing I could find was using Gyrators' exception list to not rotate the phone, but it wasnt 100% reliable. I would *LOVE* to find a way to stay in keypad mode too.
Hi All - I guess I'm just jumping on the bandwagon but I have the same issue and find it annoying. I loaded the 'incall screen tweak' but that didn't work. Any help more seasoned members than I could offer would be greatly appreciated.
Cheers!!!
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
AstarteSV said:
I had the same issue too, whenever I put my phone up to my ear (left handed) it would go into landscape. The fix is simple but you have to edit a registry setting. I'm going by memory here, so please forgive the vague info
1) make sure to backup your reg info
2) using your favorite reg edit program, goto
HKCU\Software\HTC\HTCSENSOR\GSensor\Whitelist
3) now this is the part I kind of forgot, you need to find a string with the DATA value that includes "phone" or "dailer"
4) delete that string
5)soft reset and give it a try, the phone shouldn't go into landscape whenever you turn it during a call.
Click to expand...
Click to collapse
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
MLT2004 said:
OK, I went where you said, but no dialer, and only phone entry is:
Phone/Lock/Compose/Picture
String= Dialog
And deleting this stopped "lefty" in call flipping? Doesn't make sense to me. Doesn't seem to only control dialer or phone.
Please confirm or anyone out there please help. I don't want to delete something don't understand.
Can I simple change Dialog to something like "Zero" or "0"?
Click to expand...
Click to collapse
That's it! forgot what the process name was, but yeah, deleting that stopped the phone from trying to change to landscape during a phone call. Deleting that will tell the G-Sensor not to change the orientation of the phone's screen during a phone call, however it also tells it not to change the orientation during a picture (which wasn't a big deal for me cuz I can change it when I view them in windows). You can always look up the process in google or even the forum search tool if you're still scared.
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
MLT2004 said:
If anyone else is interested I tried a "partial" delete of the suggestion above. I created a new string leaving out the Phone.
Lock/Compose/Picture
String= Dialog
deleted old string with phone/....
So far no more "lefty" crazy problems, and pictures seem to appear in landscape.
Here's hoping all is OK!
Click to expand...
Click to collapse
Awesome, good job!
I installed Gyrator 2. Just create a new event with the phone as the application. Nothing for orientation, nothing on stylus, and rotate screen for actions. Then promote the event to the top. Highlight your new phone event and select orientation, it will have a check mark and a number one next to the event. It hasn't failed on me yet and I use the key pad all day long with my job!
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
AstarteSV said:
I just upgraded to the Verizon official WinMo 6.5 and the registry hack doesn't seem to work anymore, and I'm having issues getting Gyrator to work, has anyone resolved this issue for WinMo 6.5?
Click to expand...
Click to collapse
I haven't had any of the issues with the 6.5 upgrade that were mentioned with 6.1. Haven't needed to add S2U2 since the screen lock is built in and the phone is much more responsive when placed to the ear and then moved away to access the keypad. It's not perfect but vastly improved over 6.1...
I guess my point is try it the way it is with 6.5 and see if you thinks its better. leave gyrator and reg hacks aside for a few.
Here is the thing, I just can't come around to permanently set my in-call volume to stay in maximum setting. Everytime someone calls, I have to crank side volume buttons to the max. However, I have to repeat this for every call as it automatically sets itself somewhere in the middle. Boy, this is annoying.
I have WM 6.5 HTC MEGA (TOUCH 2)
This was registry edit for the same issue on a different device though.
HKEY_CURRENT_USER/CONTROLPANEL/SOUNDCATAGORIES/INCALL = INITVOL - WAS 2, CHANGED IT TO 4.
Check registry to see if it exists and give it a try. Soft reset is required after edit.
good day.
chopper the dog said:
This was registry edit for the same issue on a different device though.
HKEY_CURRENT_USER/CONTROLPANEL/SOUNDCATAGORIES/INCALL = INITVOL - WAS 2, CHANGED IT TO 4.
Check registry to see if it exists and give it a try. Soft reset is required after edit.
good day.
Click to expand...
Click to collapse
nothing happen..if anyone knows how to solve this problem please help
I have a rooted Xperia Z lollipop. I want to disable the User add function as I am giving my kid access to the phone with screen time app. How can I make that disappear?
I have set the user_enable to "0" in the setting database but it doesnt work. Do I need to edit build.prop?
Have a look at this https://www.reddit.com/r/Android/comments/323l36/android_5x_how_to_disable_guest_additional_user/
Make sure you have backup of files you edit, it's very easy to **** up when manually editing files
edit: lol just noticed xda censors swear words, this reminds me that i have seen a setting in maybe gravitybox or some app where u can remove add use or switch guest from notification bar on top, which is probbaly what you want to do, i will check around and see where i found it.
EDIT: Another thing I just tried and it works well
Add the following lines to your build.prop
fw.max_users=1
fw.show_multiuserui=0
Change the max users number to however many users you have on phone now. I did the database change earlier too, and after adding these two lines there's still icon on lock screen to switch users but it doesn't do anything, i got a long loading the first reboot, but that maybe because i am also playing around with xposed modules, just force reset the phone by pressing volup and power for 3 seconds and it should boot. Hope this helps.
I read it. Did as said. Added fw.max_users=1 but did not add fw show... The phone went into boot loop...
Can you share your build.prop? I wonder what I have done wrong.... Duh
Do I need to add "ro.sys." before the fw.max and fw.show?