Hi y'all,
I'm looking to buy some new chargers (wall charger, car charger) for my HD2 (not that this should matter, I guess it's something that applies for a lot of devices) but can't figure out which combinations of chargers & cables will really charge at 1A.
The combination of an iPod USB charger with a micro USB cable from my local store resulted in 'USB connected', and hence maxed out at 500mA. Recently also used a 1.2A car charger with a micro USB cable (both from dealextreme, being cheap =) ), and once again I got the dreaded 'USB connected'.
What do I have to buy or do in order to make my phone understand that it's not charging through USB (well, in a way of speaking) but through a wall charger?
Muchos thanks!
Edit: did some more research. Just short circuited the 2 center pins of my car charger, and now it's recognized as AC, whoo! I suppose this applies to all chargers, hence, question solved!
I just got this today.
If your looking for a Motorola Mini-USB to Micro-USB Charger Adapter.
Tried it on the G1 house charger and it showed it charging.
Tommorrow I see if it can get the phone to a full charge.
I tried it on my Motorola P790 Portable Charger, And it showed it charging.
On the next few day I see how much it can charger up the phone.
RESULT WILL BE HERE --->>>> http://forum.xda-developers.com/showthread.php?p=13993689#post13993689
UPDATE
Data connection is possible with this adapter.
I use a cable from a Seagate external drive and this Mini-USB to Micro-USB Charger Adapter I moved files from phone to pc & files pc to phone no problem.
Motorola Mini-USB to Micro-USB Charger Adapter
Product Features
Motorola micro USB adapter lets you use a mini USB / EMU charger to charge devices with a micro USB power port.
Female Mini USB / EMU to Male Micro USB connector
Brand: OEM / Motorola
OEM Part #: SKN6252
NOTE: Some of the devices might NOT support cable's charging function by the factory setting. Please refer to the user manual for detail.
I bought from this seller on Amazone fast shipping and free shipping. I bought from them in the past.
http://www.amazon.com/Motorola-Mini-USB-Micro-USB-Charger-Adapter/dp/B0018L4GOQ/ref=pd_sim_cps_1
Yea I have a ton of those guys. Very nice
Back when MicroUSB was just coming about, my new phone had micro while my bluetooth headset and work blackberry used the older miniUSB.
Instead of buying all new chargers and car kits, I opted for those guys. Works great and an awesome solution. All of my data and charger cables are miniUSB with one of those bad boys on it. So I can use 1 cable for a wide array of devices.
Typically they are like $1.xx so buy them up.
When I connect my P6200 using usb, it doesn't charge, instead, there is an 'x' symbol at the battery. Is this normal? Because using my Galaxy Ace, it charges when usb is connected. I'm asking this because I'm trying usb tether for the first time, but in this case if it doesn't charge, it means that I can only usb tether until my battery has depleted and I would have to recharge again to be able to tether.
Yup. Usb is not able to charge tab and ipad. Need to plug to wall for charging
Sent from my GT-P6200 using XDA Premium App
Actually it does charge. More of a trickle charge tho. If the screen is off, then it will trickle charge a bit faster.
If the tab is connected via USB, will it at least be able to sustain itself via the USB power?
So if your battery is on 50%, and you keep the tablet on and are using it. Will it at least stay on 50% and not decrease slowly?
Samsung puts a resistor in their chargers so the tablet can distinguish between a Samsung brand charger and all other chargers.
The tablet will not charge (or use power from) any USB port except the wall adapter. (lame Samsung... really lame...)
You can buy adapters (or make them)
There's more info for creating an adapter yourself in this thread http://forum.xda-developers.com/showthread.php?t=845844
Just like the GT-P1000, P6200 is charging over the usb port of any pc, only when it is turned off. But anyway the charging process is much longer. Very useful when you don't heave the travel adapter with you.
i use this usb cable it work
It pulls a Max of 500mA from the USB or unknown charger. This will charge a tab plus with the screen off that isn't doing much. It will pull 1500mA from the Samsung wall charger.
Sent from my GT-N7000 using Tapatalk
My Plus charges normally from PC via USB. Icon shows 'x', but still in charging process anyway. It takes longer time but for those who tether should be ok and Plus should stay at least on the same level of %. I have unoriginal cable bought together with car charger.
I purchased a micro USB charger adapter from ebay. It just plugs into the 30 pin port and I am able to use my cell phone charger with no problem at all. The cell charger puts out 1000ma and the tab plus recognizes it. Do a search for P6200 Micro USB Charger Adapter on ebay.
If you are determined to use a computer to charge the tab plus, you will need the adapter above and a dual USB A to micro USB B Y cable. It will plug into two USB ports on the computer and give you the 1000ma to charge the tab plus. This is the best solution without having power cables all over your desk.
re
HEllo, where can I buy this cable?
thanks
cedricl said:
I purchased a micro USB charger adapter from ebay. It just plugs into the 30 pin port and I am able to use my cell phone charger with no problem at all. The cell charger puts out 1000ma and the tab plus recognizes it. Do a search for P6200 Micro USB Charger Adapter on ebay.
If you are determined to use a computer to charge the tab plus, you will need the adapter above and a dual USB A to micro USB B Y cable. It will plug into two USB ports on the computer and give you the 1000ma to charge the tab plus. This is the best solution without having power cables all over your desk.
Click to expand...
Click to collapse
Turn off your tablet... Only then its charging
Sent from my GT-P6210 using XDA
i just got this adapter from dealextreme for the p1000. it works perfectly fine for the p6200. i got my 2.1A charger to work and can charge of via USB port.
Thanks
Enviado desde mi GT-P6200 usando Tapatalk
or you can make it charge by requesting this feature in a custom kernel
Thanks
Yesterday I bought P6200 without charger, was using usb cable and it ws slow.
First I thought there might be some problems but this post helped me figure the cause
I purchased an Energizer USB Wall Charger and Micro USB Cable - Specification: Input AC 100-240V ~50/60Hz 0.2A Output DC5V-1A
The charger that came with my Galaxy Nexus has the following Specification: Input AC 100-240V ~50/60Hz 0.15A Output DC5V-1A
My question is that the input is different on both chargers so will there be compatibility issues if I use the Energizer charger for my Galaxy Nexus or other phones that charge with a Micro USB port?
may you can now charging your device with this new charger but it will have bad effect in your device on longtime
Saeedblack said:
may you can now charging your device with this new charger but it will have bad effect in your device on longtime
Click to expand...
Click to collapse
Why is that? SInce the output is the same how will it affect the device?
hi,
i have just bought the S4, the only problem is the white mains power charger cable is too short for me.
Can anyone recommend an extended mains power charger that is compatible with the S4 i9505?
Thanks
Any micro usb will be fine just keep in mind the longer the cable the slower it will charge the phone. I personally bought a power strip to add more distance ... but I also have a 10ft usb cable that charges my phone very slowly
Don't listen to anyone that says to get a usb extension cable.
to answer you'r question, you can't get a longer cable for the s4, at this time.
the usb cable and charger are "special" you have to use what came in the box to be charging the phone at ~1.5 amps, if you so much as just use a different microUSB cable, the current will go down to ~0.75 amps (effectively doubling the required charging time). same goes for the wall adapter.