Related
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
SystmDcln said:
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
Click to expand...
Click to collapse
I have it and I like it.
Pros:
Thick enough to provide reasonable impact resistance without adding so much bulk you want a trailer for it
It has a felt/microfiber lining that makes contact with the phone, reducing wear on phone surfaces
It removes easily for docking, battery changes and the like
It's not horrid looking
Cons:
Doesn't cover the area below the screen around the trackball
It doesn't look great compared to an uncovered Nexus One
Pricey
I can't improve on this pic:
http://assets2.smartphoneexperts.com/images/product_images/accessories/additional_images/6392/large/2.jpg
I like it! Just got it in last night to replace my Case-Mate Tough Case. The Tough Case was solidly built and looked like it would probably take some serious tumbles. However the rubber trim around the screen and buttons picked up pocket lint like mad. Fortunately Case-Mate has a 100% refund on returns policy. If you don't keep your phone in a pants pocket all day and don't mind a bulkier case the Case-Mate is the way to go.
That being said, the Innocase will probably protect against most of the accidental drops you'll encounter. Previously I had an iPhone 3GS and a 2G since launch and in both cases I used the Agent18 Eco Shield slider case which is a very similar design. I'm sure that over the years I've managed to slide both of those phones over 100ft on concrete and tile without damage after fumbling them.
Try Amazon, esp. the partner retailers. I got mine for $25 shipped.
The Innocase II is a very nice case, the rubbery kind of exterior feels really great in your hands and doesn't pick up lint on the exterior. It should be able to provide reasonably good protection against drops, though I haven't had any experience with dropping my Nexus yet.
The only downsides to this case are:
1. Does not work well with all screen protectors because it fits extremely well. Read that it can't fit on top of Martin Fields screen protectors due to this, but I haven't tried it myself.
2. Picks up lint between the case and the phone. The felt lining to protect the back of the case which protects the phone when you slide it in and out of the case creates a space where the lint gathers.
Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
What I need:
- This is a question: Whats the difference between hard cases (plastic) and soft cases (rubber)? Obviously besides the material
- The phone with the case on MUST still be able to be inserted without major problems into the pockets of a jeans pants (I see this a bit for difficult for rubber cases)
- I would still like to access everything, button/port wise (except maybe the back cover)
- No difference in using the keyboard or the phone in general
- Very easy to remove and put on the case from and to the phone
- Seeing as the phone is kinda heavy as is, a light material would be nice.
- No reception issues
A clear or a green case would be my personal choices as clear the phone is still visible and I like the color green Also my media player use to have a kickstand which would be nice but I care less...
Thanks
from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html
Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HT...HTC4-G2XXX_color=20&start=1&cgid=htc-g2-cases
Got mine with a free car charger on ebay for about $30
from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html
Click to expand...
Click to collapse
Thats the first case I looked at and like. The link is to the rubber version but there is a plastic one as well. Im not sure which to get as I dont know the different "feel" between the two.
Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HTC...d=htc-g2-cases
Got mine with a free car charger on ebay for about $30
Click to expand...
Click to collapse
1: Way too expensive
2: Bulks the phone up (making it hard to slide in a pocket quickly)
3: Very very bad looking
The quality looks OK (with port covers and everything) but those 3 things and after viewing a video just throw me off.
The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Sent from my Desire Z via XDA App
I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler
riahc3 said:
Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
Click to expand...
Click to collapse
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Sent from my SilverBullet 'HTCDesireZ running CM7'
The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Click to expand...
Click to collapse
But doesnt the rubber one have a "grip" as well? It would seem logical.
I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler
Click to expand...
Click to collapse
Like I commented, the otterbox isnt for me.
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Click to expand...
Click to collapse
Until it falls from one fall from 1/2 a meter into grass and it breaks.
Better to be safe than sorry about making this costly investment.
I never said the rubber one doesn't have a grip. in fact, if i remember correctly, it has such a grip that it keeps on pulling my pockets inside out. go figure.
and as I said, drop by a tmo store and check it out. you'll feel the difference and it'll help you more than just words of explanations.
Check this one out:
http://forum.xda-developers.com/showthread.php?t=1096776
This is the case I am using, LOVE IT!
Best case for me hands down is the oem g1 sock slip case thing.
No need for screen protectors, no scratches on screen now or later
Goes into any pocket, no rubber annoying crap
Costs 3 bucks on ebay
Fits even with the 3600mah mugen battery (big plus for me)
Sent from my T-Mobile G2 using XDA App
I have my s4 since november and already dropped it three times. Once on a wooden floor and two times on concrete. The phone survived (even the screen) but it got some bruises. The top left and bottom right "corner" of the phone are a bit malformed from the two falls on the concrete. Every time it fell out of my pocket, so it's not a matter of hand grip.
So I decided it's time for some protection.
I have a silicone case. It's one of those book thingies. But it was cheap, it's thin and I'm not really fond of it. Mostly because I have a hard time reaching the buttons.
Yesterday I got a hard plastic case. But the problem with this one is that it only offers protection at the back and the sides of the phone (left and right), the top and bottom are unprotected. And there is the button problem too.
My concern is that when the phone falls down, the most impact is taken up by the margins (I don't remember the technical term). It rarely happens that the phone falls flat on the screen (generally speaking). It mostly falls and hits with the margin first. And that's mostly where the screen starts to break too.
And I don't really want to go overkill with one of those bomb resistant cases :laugh: I don't want the phone to become more bulky (what's the point of a sleek design if it's ruined by a huge case)
I don't use GPS. I heard some metal cases mess with signal reception.
Considering the above, I thought I should go for a metallic bumper, or maybe silicone bumper.
I'm asking for some other user experiences here. What others have found to offer good protection and stuff. And I'm not asking for a product. I'm just asking what type of product (Case or bumper, and whatever other options there are)
I was using S-line silicone cover for my i9070 (SGS Adv) and it was nice all rounder.
Dropped phone form desk on concrete, fell off my pocket on the street ... it was all fine.
It wasn't really much thicker than phone on its own and buttons were easily accessed. I have not tried this type on S4 but I imagine there is one.
Currently in i9505 I have more bulkier case - case mate hybrid tough (2 layers: rubber "inside" similar to every silicone case there is, and plastic outside - looks like what you described as your sides/back only case, with some plastic on the corners) - buttons / screen are a bit "deeper" in the case (thicker ruber overlay on sides than it was on S-line in i9070) but damn it feels like it can survive throw at the wall and bouncing off the ground.
Sent from my TF300T using XDA Free mobile app
Amer shellster
I've been using an Amzer Shellster for my S4 and really happy with it. Cost me £12.89 including delivery. Bumper case adds minimal bulk yet provides goof protection against falls. Really like the hip holster for use running or biking.
Can Anyone recommend me a slim fit cover that fits nicely on the s4, not too expensive but not too cheap. Thanks
Sent from my GT-I9505 using Tapatalk
CaseMate Tough case. Cost me about $20 at Walmart, though it's probably a lot less on Amazon. It fits perfectly, even with a glass screen protector installed on the touchscreen. It also has a textured back which provides the "grippy" feeling that the S4 polycarbonate lacks.
I'm currently using an original Protective cover+, and though it wasn't that cheap I definitely can recommend it. Fits perfectly (of course), no problems with connecting my S4 with a docking station. Since I've got the cover I've "thrown" away my S4 four times. The first "test" was when it fell on the street while pulling it out of my backpack. Second time I used it as a torch and it fell 2 meters down on wooden ground. The other two times it fell on carpet. Nothing happened at all to my good old phone, not even a scratch on the back. Also no problems at all with using the hardware keys or headphone jack.
Otterbox commuter would get the job done. But it makes ur s4 a little bulky. Have to sacrifice that for good protection though.
I have the Spigen Neo case. It's not bulky at all but provides good protection. The case itself have buttons over the phone's buttons. I have a glass screen protector also and the 2 together is nice.
http://www.amazon.com/gp/product/B00BYJXGP2/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
I went for a basic cheap case from dx.com, SKU: 200649. But it does cover all sides, the back, as well as some of the front, due to the overhang from the sides extending out the front. I got a few other cases with different materials at the same time, but this is the one I ended up liking the most.
Thank you all for the replies.
I decided to get a metallic bumper. It does seem to mess with signal strength a bit, though.
But I guess it offers much more protection than rubber/silicone or plastic. It also held together tightly with a pin (You don't just slip the phone in. The bumper can pe opened at one corner, you put the phone in, then close the bumper using the pin). So it won't fly off on impact.
I think this combined with a glass screen protector will ensure optimal protection.
I am using a body glove 3 piece. It has a screen protector and a silicon/rubber outer cover. It was $25 dollars. It hasn't effected my signal and has survived a few falls. I know they sell them at Wal-Mart and Target.
Poetic offered me to review their case, and they sent me one completely free. I want to thank them first for this kind offer.
To begin with design;
Quality of material is really good.
It looks great :good:. Compared to the other armor cases i saw, Revolution has a cool and better looking design for sure. It does not make your phone like old army satellite phones like others.
Cuts are precisely aligned. It has cuts for both mics on top and bottom.
The stand on the back offers great functionality , also adds a good-looking detail to back side.
It offers a better grip on the phone.
Field of profession: Protection
Nothing much to say really. For sure one of the best. Case feels really solid.
Also has dust protection caps on usb and headphone ports. It really gives you confidence about drop protection. I feel like a dont need do worry about dust or dropping my phone anymore.
Cons:
As a natural downside of this high protection, phone feels a little bit bigger and thicker.
I think it is hard to put the phone to the case and back off(Maybe there is an easier way than I did). But if you need this kind of protection I guess you dont need to do it often.
To conclude:
It is one of the best cases offering that much protection also with an elegant design. Feels solid and durable, no worries about dropping. If you need that much protection, I would definately recommend that.
As a results I give this product 9/10.
Link of the product: http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4/ref=sr_1_1?srs=10167778011&ie=UTF8&qid=1449783452&sr=8-1&keywords=s6+edge+plus+revolution
Very nice and interesting! Good work!
DBase2 said:
Very nice and interesting! Good work!
Click to expand...
Click to collapse
Glad you liked it
I'm pretty sure this is the ugliest design possible. Wouldn't put it on my phone if they paid me.
It seems too big to be good for daily use
Sent from my HTC D820us using Tapatalk
Protection vs Convenience!
I got one too for the review! Here's my list of pros & cons:-
Pros:-
- Protection
When they say protective case, I didn't realize they literally meant every letter of it! This shell is so damn hard, I can beat the **** out of a mugger if it ever comes to that. I'm pretty sure even if I drop the phone on the ground from the first floor, nothing will happen to the phone unless the screen hits directly on some elevated object. So I'll give it a thumbs up on protection category. The case is damn solid! The brand also claims that the case is shock resistant, although I didn't get a chance to test it out myself (or may be I don't want to find that out). The case also covers the volume rocker and the power button with its own tactile buttons.
- Dust Resistant
Putting the case on is quite a challenge, however once done, it doesn't leave much space in-between the case and the phone itself. The USB Port and the 3.5mm Audio Jack has a dedicated pull-up flaps which are easy to open and close. So, overall, it has some dust protection too.
- Excellent Grip
The case is built with some reinforced TPU (or similar material) with texture on the sides which provides excellent gripping to the holding hand. Even if you drop it, doesn't look like it's gonna make any difference anyway!
- Built-in Kickstand
Not just the case, even the built in kickstand is made of metal and it definitely feels solid unlike some lousy kickstands which come with many other cheap cases. So you have the power kick it out and enjoy movies/videos (or games if you use a gamepad) anywhere you want.
Cons:-
- Size
Huge! That's what it is. Edge+ is already hard for some to handle it with one hand but putting this cover on, it becomes almost impossible for them to operate with one hand. It widens the phone by atleast 1.5-2 cms.
- Weight
With power comes responsibility. Similarly, with protection comes additional bulkiness! At 90 grams (3.2 ounce) this is the heaviest case I've ever used. At 153 grams ( 5.4 ounce), Samsung Galaxy S6 Edge+ is one of the slimmest and lightest phablets in the market and this case would put that to complete shame!
- Case On/Off
With my Gear VR, I need to take off my phone's case every now and then! With this case, that's not happening. It took me almost 15 minutes (first time and the only time) to put this case on. Trust me, it's damn hard to pull out the frame ( the plastic bumper) from inside the case and putting the phone inside is even harder! Though once done, it's definitely protected! Now, taking off the case is another challenge!
- Buttons
Due to this reinforced TPU material, the buttons on the case are a bit harder than usual. So you might have to use some extra strength when you want to access the power button or volume key, you still get the tactile feedback though!
The Final Verdict
If you work in a harsh environment and your sole purpose of a case is protection of the phone, this case is definitely for you. But if you hands are short or you like keeping your phone in your jeans pocket or you want to show off how cool is that edge display of your phone, this case isn't for you! Check out the HD images for a better view!
First I would like to thank Poetic for sending me a free sample to do a review of it.
I received Poetic Revolution case one week ago and I decided to test it for a while before I write a review.
At the first sight I was astonished by a quality of a case, I have never seen case with more details before. I really like its millitary look. I love how all holes are precisely cut out. They are covered with a dust protectors which is really nice. When you hold your phone in this case you are completely sure iz will not slip out of your hands.
I found metal stand really useful especially when I watch movies, have video conversation with my girlfriend or when I cook lunch and cannot hold my phone.
When It comes to protection I am sure it will prevent my phone of taking damage. My son dropped phone on the floor two times and phone survived just very well without cracking.
Cons:
- It is a little bit too bulky (but it is ok as protection is its main role)
- There should be screen protector intergrated in this case
- Every time I insert charger I am afraid to scratch bottom of my phone.
Overall I am keen on this case because it gives best protection to my phone. I love how nice it looks on my phone.
If you want highest level of protection for you smartphone you shoud definitely give it a try:
http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4
I received the Poetic Revolution case as well about a week ago. I wanted to give it a weeks worth of use before giving a review.
Pros
(1) Very well built. This thing is rock solid and the tolerances are super tight. This keeps out the dust and offers great protection from falls.
(2) Great Design... The overall aesthetics of this case are great. You can tell a lot of detail went into designing this case. It's funny to mention but I found the integrated backplate (blue plate) on the inside of the case to be impressive how it's molded into the rest of the case.
(3) It's awesome that they included a kickstand. I miss the days of old when phones had kickstands built into them, but this is a great alternative option since the newer phones don't have the kickstands anymore.
As far as CONS go.... there really aren't any that I could find. I did have a couple annoyances that I'll list below but these are subjective of my own opinion and shouldn't be viewed as a flaw in the design or a need to change it in any way, just a couple suggestions that would make "myself" like the case even more...
(1) Not a fan of the caribeaner loop... I get why it's there, and could be useful to some, but I feel like I'd just want to get some snips and cut it off... I wear baggy pants and can still fit this big case/phone in my pocket, however that caribeaner loop would catch on my jeans and just constantly annoy me. A minor hindrance, but I'd prefer it without the loop.
(2) I noticed the kickstand would "tap" against the backside of the case. This would be a little annoying were there any vibrations going on. For instance when my phone is in my car dock stand, the vibrations from the car/road would make this rattle ever so slightly. My suggestion, integrate some sort of rubber/silicon surface just under where the kickstand meets the backside of the case.
Final thoughts....
This is a great case that would definitely protect your phone had you dropped it, or are in a harsh environment. The design is eye-catching and worthy of the newer era of smartphone cases. The kickstand feature is a definite plus, and even though I am not a fan of it, I could see how the caribeaner loop would be useful for the outdoorsman or a construction worker.
I received my Revolution case from Poetic over the holidays (thank you guys).
The first thing that I noticed was the build quality!! It's amazing guys. You won't be banging up your phone with this case protecting it!!
All of the cut outs are very precise. The case has dust flaps to cover the charger and ear phones sockets. The case is a two part case that you take the rubber inner out and after fitting the phone into it then you put the outer tougher part on. It does add a little size to the phone but it's going to protect it from and mishaps. After all...protecting a phone that costs more than most gadgets out there is the main thing. I have used it now for a couple of weeks and I must say that when you buy a Poetic Case you're buying the best.
I am a proud owner of two different cases from Poetic and I promise you that one you try you will always buy from them.
I only found one slight hindrance and that's the kickstand. After a day or two it seems have become a little loose and taps and rattles. I just placed a tiny piece of blue tac under it to keep it closed.
Please try these cases from Poetic guys...I really speak highly enough!!!
Sent from my SM-G928F using Tapatalk
I have been using the Poetic Revolution case on my gold Galaxy S6 Edge+ for about a week and a half
now. Here are my thoughts.
When looking for a rugged case, the Poetic Revolution marks off every box, and then some. This is one
of the best, and toughest cases I have ever seen. When not at work, I need a case like this for my phone.
Hiking, camping, car shows, at the lake, my kids and I are always outside. I have 2 young sons, with this
case on, I am not concerned if they grab my phone and throw it around. I have an 85 pound puppy that likes to chew. Thankfully he has never gotten a hold of my phone, but I feel confident this case would protect it.
When receiving this case, I thought it was going to be all black, but it was not. It is black with very dark
brown accents. I personally liked this as it makes the case stand out more, but in a subtle way. I also
think it makes the case look really good with my gold phone. I also really like having the port covers.
While out on the sand rails and quads out in the desert, they keep the dirt out. When you are at home
with your phone on the counter, they can keep them covered long enough for you to save your phone
should something get spilled.
I have seen where some people have said that this case is very difficult to take on and off, however, I
do not feel that way. Is it more difficult than just a thin snap on case? Of course, but I have no concern
that this case is coming off my phone if it gets dropped. I have used cases that go on and off in the same
way in the past, and I prefer them. The way it’s made, it is thinner than an Otterbox type case, but in my
opinion stronger because you don’t have 2 plastic pieces snapping together.
The kickstand on this case is also among the best I've seen. In my experience, most kick stands are
made from a cheap material, or even if they aren’t, they pop out of the case so easily the little nubs that
are used to snap it into place break. Not here, where it is very tactile in extending it to use it, but it will not pop out of the case on you. One other benefit is that I have been able use it both horizontally and vertically.
When it comes to the loop at the top, I could go either way. I would be happy with a case that did not have it, but I think it could also be more useful with some minor improvements. If I am just hiking, I feel confident when hooking it to my backpack. However, when out riding in the desert, I do not feel that it is strong enough to hook on to my keys or someplace similar. If it kept the loop, I would use it more if it were reinforced with a harder material. Either way, I think this was a good idea to separate their case from others.
Though I was pretty sure they would not work, I did test both wireless charging and Android Pay (NFC) with this case on, and neither worked. This was not a big deal for me as I do not use Android Pay much, and I only wirelessly charge at work, where I can just take the phone out of the case if need be.
This case was provided to me by Poetic for my honest opinions. For the price of this case (currently $19.95 on Amazon), it is superior to cases costing twice as much. Though this is my first Poetic case, it will not be my last. I was so impressed with this case that I recently purchased a Poetic case for my Galaxy Tab A after the old case was chewed by above mentioned puppy.
Looking great will definitely try it soon.
Sent from my SM-G928G using Tapatalk
I'm just wondering if anyone is using the Unicorn beetle and what do you think of it? What is the built in screen protector like? Does it work well with wireless charging and does the screen protector fit tight to the screen?
I have the black and the blue, extraordinary protection, wireless charge compatibility, no expensive. The cons a little bulky, the screen protector is better than previous models but it is made of plastic and I need to clean it constantly, but its clear, without sensitivity issues and it's only protection is versus scratches.
With the black, I replaced the plastic and used a White dome instead but I think that the thicknes of the glass was not compatible with the case and few weeks after the adhesive of the dome rip off.
Is it as good as an Otterbox defender though?
pacherecords said:
With the black, I replaced the plastic and used a White dome instead but I think that the thicknes of the glass was not compatible with the case and few weeks after the adhesive of the dome rip off.
Click to expand...
Click to collapse
I have almost the same phone cover (looks the same) as you, mine is SUPCASE CLAYCO XENON and it is magnificent!
DeVilio said:
I have almost the same phone cover (looks the same) as you, mine is SUPCASE CLAYCO XENON and it is magnificent!
Click to expand...
Click to collapse
they are all belonged to the same company
I use it and Love it!
Although, I had removed the Plastic Screen Protector.
I never liked that and will Not use a Plastic Screen Protector ever.
They scratch easily.
Did you get the case? I'm looking at beetle pro?
Where do I even begin with this steaming hot pile of garbage?
Ok, how about the basics: The button response is fantastic. Best response I've ever had in a case and a really smart design. One star for that. The fit is also fantastic, one star for that.
Now... If you are thinking about purchasing this item, keep in mind whether you did it through a signature on a contract, or you forked over your hard earned cash you are now the proud owner of a $1500 device which at time of writing is superior to 99% of the others you could have chosen.
With that factoid in mind, you really need to stop for a second before pressing that purchase button and ask yourself why you have given yourself the rolls royce of phone experiences if you are going to put the kingswood of phone cases on it?
From the second you take this thing out of the box, all the illusions of SUPCASE's snazzy manufacturer website, high quality rendered images and romantic illusions of ruggedizing your handset will fall away to dust. This case is plastic-fantastic and it is immediately obvious that you have just made a terrible mistake.
I'm not sure which case my fellow reviewers have received but I will have to assume it was one that SUPCASE paid for themselves.
The 'screen protector' seems to be made out of discarded freezer bag and glued in to the front section by a blind man with a hot glue gun. It feels cheap, it looks cheap...it is cheap. No big deal, you can rip it out in 2 seconds flat and fit a proper 9H glass protector.
Even after that, you are still carrying your $1500 phone around in a flimsy piece of plastic that looks every bit like the $5 price tag it SHOULD carry.
The dirt-quality plastic is thinly veiled in form, but in function it will not be long until the hinges of the kickstand mechanism are loose and weak. The stand itself is manufactured out of such poor, thin, flimsy material that it is nothing more than a momentary novelty, not long of this earth.
Dust protection: Yes. It has flaps over the charge port and headphone jack. The flaps are insanely stiff, which makes me think they put their entire materials budget into the internal rubberised liner which is actually stiff enough to put undue pressure on the charge cable to the point that I will not use them. They also put them right next to 2 gaping holes for the speaker port and S-Pen meaning any perceived dust prevention is pure fantasy. They will keep large debris out of the hole if you spend a lot of time in the bush, which is half the reason I bought this case.
"Oh, nevermind, I only charge wirelessly - I don't care if the port covers are stiff, I hardly ever use them!" I can almost hear the thought running through your head. Well, allow me to break that illusion.
SUPCASE have managed to do what almost no other manufacturer has been able to! Build a case that does not work with wireless charging unless you have the official Samsung horizontal charger and are prepared to spend a bit of time figuring out exactly the right spot to place it every time. So, you're going to need to worry about those port covers after all.
Why would anyone want a wireless charging solution that lays their phone dead flat? Most utilise an upright design which allows you to easily view notifications etc on a desk, or on a night stand. This thing even blocks my 15w upright charger, I'm not even sure how they managed that because I'm pretty sure you could cook eggs on it if they had an induction coil.
Overall, SUPCASE have really let themselves down here. The design is fantastic. It is reminiscent of the Samsung Active lineup in styling. There's a great lip top and bottom to prevent the screen from contacting the ground in a drop, it's well cradled in the rubber section and I do actually have a tiny bit of faith the phone could survive a drop in this case. Why they had to go and build the bulk of it out of the cheapest materials available I will never know. I would have paid double if they'd done the job properly. Now I'm out of pocket and will end up paying twice.