Database Info

[Q] Advice on Galaxy S case

I don't have any protection or case for my Galaxy right now and I really need to buy something. I just can't make my mind up. I'm posting the items I've spotted so far:
(I'm sorry I wanted to put the links but I'm new so not allowed, I'm just typing down the items by their names and if you copy paste it on google they'll pop up easily)
- Case-Mate Tough Case - Samsung Galaxy S - Black
- Case-Mate Barely There For Samsung Galaxy S - Black
- Krusell DONSö Leather Pouch
- Original Samsung Galaxy S i9000 Leather Pouch Case
-Advanced FlexiShield Skin For Samsung Galaxy S - Black
I really don't know what to do, get a pouch and invisibleshield? or a thin rubber thingy and a pouch? or just invisibleshield and a pouch on it?
Could you guys just advice me a bit, thanks a lot!
I'll be waiting for an answer mates.

I'd go for invisishield and a little care. The bulky cases just break the beautiful design of galaxy S.

Personally i like these cases , not alot of protection on top and bottom but something is better then nothing and i hate covering up phones with silicon cases but i think this cases adds to the look of the phone not detracts.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from here

I have the Mesh Case Black and its really nice.
I would recommend the kickstand case though as it is the most useful

DARKKRAKEN said:
snip
Click to expand...
Click to collapse
That looks strangely familiar

Qazz~ said:
I have the Mesh Case Black and its really nice.
I would recommend the kickstand case though as it is the most useful
Click to expand...
Click to collapse
I just received my kickstand and agree with its usefulness. It won't be my primary case but will def use it in the office.

Fornowagain said:
That looks strangely familiar
Click to expand...
Click to collapse
Yah i borrowed your pics from OCuk as i was too lazy to do my own, hope you don't mind.

Jah-lion said:
I don't have any protection or case for my Galaxy right now and I really need to buy something. I just can't make my mind up. I'm posting the items I've spotted so far:
(I'm sorry I wanted to put the links but I'm new so not allowed, I'm just typing down the items by their names and if you copy paste it on google they'll pop up easily)
- Case-Mate Tough Case - Samsung Galaxy S - Black
- Case-Mate Barely There For Samsung Galaxy S - Black
- Krusell DONSö Leather Pouch
- Original Samsung Galaxy S i9000 Leather Pouch Case
-Advanced FlexiShield Skin For Samsung Galaxy S - Black
I really don't know what to do, get a pouch and invisibleshield? or a thin rubber thingy and a pouch? or just invisibleshield and a pouch on it?
Could you guys just advice me a bit, thanks a lot!
I'll be waiting for an answer mates.
Click to expand...
Click to collapse
I use the Krusell DONSö Leather Pouch (and nothing else) and I am very happy with it. It fits perfectly and protects the device from any falls.
And it looks really cool also...

I use a combination of kickstand case at home and a leather pouch on the road.

Love my Case Mate Tough case. More expensive, but gives great protection. Comes with screen protector too.
http://www.play.com/Mobiles/Mobile/...-Galaxy-S-Tough-Case-Black-Black/Product.html

These cases are great.. Until it rains heavily and your phone is destroyed...
Get one of these instead: http://www.h2oaudio.com/store/index.php/waterproof-armbands.html

I ordered the Case-Mate Barely There, will post a pic once it gets here.
IMO I think the invisi-shield is too thin and the glossy surface is a finger print magnet.
The Barely There is a good compromise and respects the original design.

These are best hands down imho for me
DARKKRAKEN said:
Personally i like these cases , not alot of protection on top and bottom but something is better then nothing and i hate covering up phones with silicon cases but i think this cases adds to the look of the phone not detracts.
from here
Click to expand...
Click to collapse
Sent from my GT-I9000M using XDA App

I went for the GREY gel case and I dont regret it...Protects and it is less noticeable
Good price and good quality ...Delivery took 6 days to Holland:
http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=180542842233&ssPageName=ADME:B:EOIBSA:NL:1123

Qazz~ said:
I have the Mesh Case Black and its really nice.
I would recommend the kickstand case though as it is the most useful
Click to expand...
Click to collapse
This .
Bought it from ebay seller named udamoa. I also got free black jelly case and two screen protectors(which has better quality than my folix sp) as gifts. all for $8.90

Qazz~ said:
I have the Mesh Case Black and its really nice.
I would recommend the kickstand case though as it is the most useful
Click to expand...
Click to collapse
This is the only case I've found that seems to have the top right corner open, can you guys please confirm this? This is important to me because the brazilian version of the i9000 has a TV antenna there.

bidboy said:
Love my Case Mate Tough case. More expensive, but gives great protection. Comes with screen protector too.
http://www.play.com/Mobiles/Mobile/...-Galaxy-S-Tough-Case-Black-Black/Product.html
Click to expand...
Click to collapse
And is it easy to open to replace battery after installation? I usually switch batteries every day... and that's the only thing that is still keeping me from clicking the buy button

drcursor said:
And is it easy to open to replace battery after installation? I usually switch batteries every day... and that's the only thing that is still keeping me from clicking the buy button
Click to expand...
Click to collapse
It is done in 3 seconds.....

I looked at the seller, udamoa on Ebay. he seem to sell 2 cases, the kickstand one and one that looks like Kraken's. Can anybody tell me, who owns them, how they are? Like, in terms of drop protection, material, and feel?
Thanks!

Okay, now I vote for Toughcase for the following reasons:
Our phone has the same glass screen as the iPhone, and it's scratch resistant.(there is a video on youtube). Unless you walk around with a razor in your pocket, the screen won't have a problem with it. Also screen protectors add a layer of film on the display, therefore making it less bright/visible, etc. My recommendation: won't bother buying one.
Our SGS's serious problem is the screen toughness. (also video on youtube). If you drop it, you have a good change it will shatter! So let's find a solution on this one:
- full body covers like zagg for obvious reasons won't help(also had a zagg, and I don't like the touch of it)
- leather flipcases, other leater cases only help if you are lucky with the drop
- pouches are also a waste of money, because you have to take the phone out to use, call, etc.
I bet we should move towards the silicone case, or hardcase option. Best of both words are the toughcase from Casemate, a silicone internal cover, and an ABS plastic outer case.
These are usually also a bit thicker on the front, giving the display a very good protection, as well as shock absorbation from drops.
Check play.com, it has a 50% off sale(£15).

Diztronic Matte Black TPU Case Mini Review

http://www.neowin.net/forum/topic/1090499-diztronic-matte-black-tpu-case/
Mini Review of the Diztronic Matte Black TPU Case:
You receive a screen protector and cleaning cloth with the case. The screen protector doesn't appear to be a great fit, no idea about the quality and how it affects the screen overall. The cleaning cloth seems pretty good
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This case is very thin, it is slightly thinner than the TPU gel case, about 1mm is added to the S.
Diztronic case on the left, TPU gel case in the middle and the Tough case on the right:
Diztronic case on the left and the One S "naked" on the right:
The case looks great, in some ways the glossy front half of the case looks rather good with the back half a charcoal matte back (it is the exact same colour as the black S). Personally I would have preferred the front to have been the same colour/finish, however, the back is very smooth and not grippy at all, it has the least amount of grip compared to the other cases I own, I would say it has a more "slippy" feel than the ceramic back of the Black One S as well, where as the glossy black front half of the case is grippy, so you will have no problems picking the mobile up and when holding it firmly around the edges you should be safe enough, so in some ways the black glossy part is a requirement.
You have cut outs for the following:
- 3.5mm audio jack and the mic on the top of the S
- Mic on the bottom
- Power/Lock button
- USB port
- Speaker and Camera on the back
The edges of the cut outs have a nice rounded finish and look "smooth".
In terms of the "fit", overall it is excellent, however, at the bottom of the front it is just a mm too short. It is pretty much the same as the TPU gel case for "tightness", although I found the Diztronic case slightly easier to fit.
You can see (only when you look closely though) and feel some rough seam edges where the matte and glossy black parts meet, more so on the volume buttons (although the volume buttons have only the matte finish), but compared to the £3 TPU gel case, it is much better! There is one spot, which is particularly bad though, on the bottom left of the case:
The great thing about this case is that you have a cut out for the power/lock button The TPU gel case was too tight around that area and also the volume buttons are much better, easier to press and have good feedback when pressed, still not as good as the Tough Case though and obviously when the S is "naked". It is easy to identify the volume buttons without looking compared to the TPU gel case.
The camera lens is below the surface and the case covers the edges on the front and adds a very tiny amount to the front so that there is a a raised edge for when the mobile is placed flat down on a surface to stop the screen touching the desk surface, it is slightly less than what the TPU gel case added.
Regarding finger prints, sticky patches and greasy looking marks, I don't think this is going to be a problem at all with this case due to the matte back and just how smooth it is. So far I have yet to see any finger prints etc. And if there is, you will only notice them under extreme lighting conditions and when looking at the case from certain angles.
It is more "comfortable" to hold the S with the Diztronic case rather than the S "naked", however, it doesn't "feel" as nice to touch/hold as the ceramic back on the S.
The case feels and looks much better than the TPU gel case, overall it has a higher quality feel and look to it.
The minimal/clean design for the front of the S is still hidden/ruined slightly, as expected, unfortunately as I said before this will be the same for every case that covers all the edges, only the rock/nillkin/case mate barely there cases would keep the front looking pretty minimal/clean, but they don't offer any protection around the top or bottom.
As for protection/durability, I would say that the case would do a good job protecting the mobile from normal drops and the standard scratches etc. however, a drop onto solid concrete etc. from a good height could damage the mobile i.e. crack the screen as their isn't enough thickness to the case like there is with the Tough case and there would be no shock absorption either. But for daily use, I would say it is perfectly fine. However, this case would show scruff marks on the corners/back when dropped onto concrete etc.
All in all, the case is very good especially considering the price (£8), highly recommend it to everyone especially if you are looking for a case to cover all edges but with little bulk.
IMO there isn't a better case out for the One S that covers all edges whilst adding little bulk and looking as nice overall, especially the lovely smooth matte back even though it isn't grippy
Pros:
- protection for all edges
- nice cut out for the power/lock button
- good feedback for the volume buttons, easy to identify and to activate the buttons
- nice finish/looks overall
- comfortable to hold
- Also receive a cleaning cloth and screen protector
- resistant to finger prints, greasy marks and sticky patches etc.
- price
Disadvantage:
- no grip at all on the matte back
Thanks for reading and I hope this review has been helpful and as always any questions, ask away

I was dying for someone to review this case.
Next check I'm getting this case then a Personalized Andy CruzerLite case.
Thank you.
Sent from my HTC VLE_U using Tapatalk 2

No problem

i woulda done the review if i knew ppl were waiting on it too!
i got the same exact case and i love it. super cheap!
dropped the phone on CEMENT from chest high and it hit the bottom corner and saved my ONE S!!!
that alone made this worth it!! its probably one of the cleanest looking cases for our phone.
the matte texture gives me just enough grip compared to naked (since its SOO dam slippery!)
it is the perfect thickness for me to hold in my hand.
4.9/5 because the POWER button is so sunken in
but i guess it helps since i dropped my old phone and broke the button.

Great to hear that the S with this case on survived that drop!

I have this case and I recommend it to anyone who owns a HTC One S. It barely adds bulk and it is still thinner than my old HD7 naked. Just very slightly, though. The included screen guard is also very nice. I did not expect much from it and ordered an invisible shield but I have not gotten around to putting that on because this screen guard is so nice! It is not the same quality as the $1 ones you get on eBay.

I also have this case, ordered from Amazon. Probably the only case I have found (though I haven't looked since getting it) that I can deal with. Been good to me so far. Only issue I have is that it collects dust and lint between it and the top of the phone. I assume though that most cases do this to some degree.

Have you guys got this case on a grey/blue one s rather than the black one as op shows? I am curious to see how it looks on the blue one. Any pics please? Thanks.
Sent from my HTC One S using xda app-developers app

I've had this case for a few months and have been very happy with it. In fact, I just received the translucent smoke color version just for something different. I like the translucent case a little better with the blue phone. The screen protector is also of good quality and has hardly any scratches after months of use. Highly recommended and a good value.
Sent from my Nexus 7 using Tapatalk 2

murse said:
I've had this case for a few months and have been very happy with it. In fact, I just received the translucent smoke color version just for something different. I like the translucent case a little better with the blue phone. The screen protector is also of good quality and has hardly any scratches after months of use. Highly recommended and a good value.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Do you think you can please post some pics, please?
Sent from my HTC VLE_U using Tapatalk 2

Pics
I can help you with that.

AL1S said:
I can help you with that.
Click to expand...
Click to collapse
Thanks for that!
So this one is the matt black not the smoke one right? It looks really good!

Yes, that was the matte black one. I am not a big fan of cases as you can see I considered the Zagg full body, but this one is actually nice, as you can see. It won't offer you the best protection but those cases are UGLY. I'd like to see what the smoke one looks like on the gradient blue One S.

Nice review. Have just ordered the case.

I have had this case for about 1 month. The fit, texture, and screen protector are all to my liking. I have nothing bad to say about anything! A great investment...too bad I dropped my One S (leaving a few scratches) a day before I got the case in the mail lol.

Best Samsung Galaxy S4 Case - Protective Cover +

Best Samsung Galaxy S4 Cover - Protective Cover - REAL REVIEW - 720p @60fps​In this review I did an unboxing, and explained why Samsung's Protective Cover is better than Spigen's Neo Hybrid Case. Before I got this case, I thought that Spigen's Neo Hybrid was best, but after less than 1 year of usage the side cover of Neo Hybrid broke up. There were also some other problems with the Neo Hybrid case which I showed in this REAL REVIEW.
Pictures​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I used this case in my device but I like more the Otterbox cases in terms of durability, The Spigen is easier to put on and take of but the Otterbox are made for tougher life. I use my device to do sports and I must use a case that is hard enough and not too bold to fit in my pocket.

I like this cover a lot. It has many adventages. It fits perfectly meaning buttons corners. It has cutouts in perfect places and with right shape. The back is made of tpu harder plastic which makes it quite tesistant to drops and hits. Tje sides are made of silicone which makes it nice in touch. Only thing problematic is that the back could be more sticky to avoid sliding outta hand. The rear cutouts for camera and speaker have small raise ups to help avoid scratches on camera glass and provide the possibility to jear spealer when the phone is on its back on desk or something. The front has like 1mm stick out part ariund screen which saves hits on tje gorilla glass when you put it upside down. The cutout on back for camera has a wall of material between it and led flashlight to male it more stable and avoid bigger rocks or dirt to get to camera glass. It looks lile it

I purchased the Spigen Slim Armor View good case. but.. the sview door broke in two months

Im a big fan of the www.lowprocases.com samsung s4 case. Its slim and make my phone look bad ass. Easily get asked what phone I have. http://static1.squarespace.com/stat...e12/1425585170209/samsungs4b.jpg?format=1000w

I had this case for my old Note 2. Great case, but I don't think the TPU edges offer enough protection from drops. I rock the UAG or Speck Candyshell. Amazon has it the green one for $3.50.

Pknockle, no one cares about your sh!tty cases.

i bought one of those before but it was a very tight fit, and when I put on my wireless receiver, it made it really tight and the buttons did not align. I use a simple roocase bumper case and a UAG case now. Both work with the wireless receiver .

hi, I wanted the armor Spigen slim but given the feedback, too fragile

patcinom said:
hi, I wanted the armor Spigen slim but given the feedback, too fragile
Click to expand...
Click to collapse
I have one and I haven't had any problems with it. I do notice some lines in the plastic forming near the bottom of the buttons where I can see it breaking eventually. That's only because I take it off to switch batteries a couple of times a week. The case gives the phone a very solid sturdy feel and the rubber absorbs impacts very well. I've dropped it a few times and you can hear that the impact was absorbed.

Otterbox Defender
I used Otterbox Defender for the past 2 years, got it after a week of using the flip case that i hated. Its very durable but its not with flaws, after 2 years (i have no complaints or regrets), the screen protector / plastic is too scratched i just pull it off (im using a tempered glass anyway so no problem.. The rubber jack covers and port covers gives way as well.. and recently the side rubber also rotted more and more but it looked like Rick Grimes in Walking Dead, old and seasoned... haha.. it survived heavy usage as i practically bring my phone everywhere lol and my S4 practically looked brand new because of my Otterbox.. i would really recommend Otterbox if you're looking for heavy duty cover and if you dont mind the bulky appearance.

I have this case too. Bought a Spigen thinking it'd be better but it just added unnecessary bulk and didn't feel as good.

nice case

I use Spigen cases

still prefer bumper cover.. this case makes the phone bulkier..

thanks:good:

I personally think the Speck candyshell grip is the best case for any phone out there. You can't beat it. Great aesthetics, amazing grip, very slim/light, and fits perfectly on the phone, and not to mention, a very tight fight for the phone, giving you a ton of confidence that the case won't come flying off if you drop it.
And shout out to the body glove tactic case for the s4. The only other case that comes close to the Speck grip case, and on certain days, prefer it over the candyshell. Never thought I'd find a case as good as the Speck grip case.
Sent from my SGH-M919 using XDA Free mobile app

I have a new candidate for best case for this phone. Body glove tactic. Less grip than the Speck, but still gives a good amount of grip, and what I love about this case is how slim it is when holding the phone. Feels almost as slim as a naked Galaxy s4 (not quite, but as close as you can get with the amount of protection you get with this case), and not as wide feeling like the spigen slim armor, or the Speck. The specks not even wide feeling, it's just that this case is so lean.
Sent from my SGH-M919 using XDA Free mobile app

patcinom said:
hi, I wanted the armor Spigen slim but given the feedback, too fragile
Click to expand...
Click to collapse
Nice case to look at, and very protective, but too wide, and doesn't have any grip.
If you want an all around great case, go for the speck candyshell grip, or the body glove tactic. Me personally, I'm done using cases. I'm not gonna sell or trade my phone at this point, so really don't care anymore if it gets a few scratches here and there. I'm still using a screen protector though, because the screen is the most important thing on the phone. Besides, I'm really careful with my phone, and probably dropped maybe 2-3x in the entire 4 years if owning this phone.
Sent from my SGH-M919 using XDA Free mobile app

Seidio convert combo.

Case or no Case?

I got the One M8 a few days ago and with what happened with my DNA I got a Defender case. I got a case mainly to keep the phone itself as close to like-new condition as possible. I also have a hard time holding the phone bare w/o having it slip out my hands. I wanted to see how everyone else has their phone either with a case or without. Also if you had the phone since release or close and don't run a case I really want to see what type of conditioning it's in.
Here's mine in my Otterbox (yes that's pink)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

dkris2020 said:
I got the One M8 a few days ago and with what happened with my DNA I got a Defender case. I got a case mainly to keep the phone itself as close to like-new condition as possible. I also have a hard time holding the phone bare w/o having it slip out my hands. I wanted to see how everyone else has their phone either with a case or without. Also if you had the phone since release or close and don't run a case I really want to see what type of conditioning it's in.
Here's mine in my Otterbox (yes that's pink)View attachment 3170658
Click to expand...
Click to collapse
I always use a thin case to avoid scratches, keep the screen off a surface when placed face down, and for grip. I never use a screen protector. For my M8 i chose this one and am quite happy with it. It will also fit in a Seidio SURFACE belt-clip holster. Doesn't look bad either.
http://www.amazon.com/gp/product/B00IJ0R02Y/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1

I got the UAG off Amazon. It's pretty slim but offers great grip and protection. Also has a hole in power button for remote control too.
URBAN ARMOR GEAR Case for HTC One (M8), Slate by URBAN ARMOR GEAR http://www.amazon.com/dp/B00IEFUC88/ref=cm_sw_r_udp_awd_Lt64ub0XP9GXJ

Defender case since new with zagg screen protector

I've been anti-case/anti-screen protector forever.....even with my DNA. The M8, while gorgeous au natural, is also very slippery. I went with the Dot View because I like the added functionality and it makes it grippy enough that I won't drop it. It's not a great protective case like an Otter et al...but (knocking on wood) I do not drop my phones and it protects the screen from scratches in my pocket/bag/etc.

I use the spigen slim armor case. Fairly thin. Has air cushion corners for shock absorption. You can mix and match multiple colors. Two piece case. Rubber interior with tpu cover.
See here on Amazon.
http://www.amazon.com/gp/aw/d/B00IF5B49S/ref=redir_mdp_mobile/189-5970498-7041545

toknitup420 said:
I use the spigen slim armor case. Fairly thin. Has air cushion corners for shock absorption. You can mix and match multiple colors. Two piece case. Rubber interior with tpu cover.
See here on Amazon.
http://www.amazon.com/gp/aw/d/B00IF5B49S/ref=redir_mdp_mobile/189-5970498-7041545
Click to expand...
Click to collapse
I was running mine naked until I recently just bought that same case...for the slip prevention. I had the phone slip out of my shorts and between car seats a couple of times. Happy with this case.
Sent from my Gunmetal Grey M8

dkris2020 said:
I got the One M8 a few days ago and with what happened with my DNA I got a Defender case. I got a case mainly to keep the phone itself as close to like-new condition as possible. I also have a hard time holding the phone bare w/o having it slip out my hands. I wanted to see how everyone else has their phone either with a case or without.
Click to expand...
Click to collapse
I got a black Otterbox Defender the day I received the phone for the same reasons you bought your case, protection, makes it easier to hold and I really like the kickstand feature, I use the phone at night as a bedside alarm clock.

I went with the clear case Verizon sells. I like it, and a phone that looks this good really should be shown off in my opinion. I'm not at all sold on otter boxes. I used one briefly on a BlackBerry and I thought it was the most overrated piece of craps ever invented. I don't do the screen protector thing either. Modern screens are damn near impossible to scratch with normal use. The last time I used one was on my Rezound, and only for a short while, and after 3 years I only had one scratch as a result of jamming my phone in my pocket with my keys.

Used the HTC Flip Case (didn't like it much, and in any event it gave its life for a test phone); a no-name clear TPU case; the Spigen clear case; and a Dotview case. Oh, and the clear case that Big Red sold with the rubber strip around the side. I prefer the Dotview case. I really like that functionality. I feel the other cases leave the screen too exposed.

Use a case. I had a Dot View, it fell out of my pocket from maybe 2' off the ground at the most when I was leaning over. Dot View flipped open, phone landed face down, hairline crack that eventually spider webbed. Flash forward 2 months. Hardest phone to fix screen on ever-the guys who replaced it, broke other things in the process. Now I bought used M8 and Otterbox. If you crack the screen you can almost just toss it. I bought a mint used one for not much more than the screen replacement cost.

From my Incredible 2, DNA, and now M8 I've disliked cases. They always make the phone feel bulky and take away from its design.
For my M8 I have a Phantom Glass screen protector that I cannot recommend enough, and a skin from Slickwraps to avoid some of the phone's slipperiness, prevent scratches, and in my opinion make it look better.

So I went crazy and bought a UAG case, Spigen slim armor, and a Zagg glass screen protector. The slim armor came in and its the same color as my phone (love that) and it is a perfect case (for me). It adds enough bulk so that I can grip the phone better and to protect the body from scuffs, and its thin enough to feel close enough to the actual phone design. Also the detail of the case is spot on.
After hearing about tat issue with the cracked screen I'm glad I got a glass screen protector. As for the UAG, don't know if I'll try it or just return it outright. I may just use the UAG whenever I'm one handed vlogging and use the Otterbox as a travel case. In any case (no pun intended) I want to at least get the $60 out of my Otterbox.....

No case, and this is the only phone I've ever owned that I have dropped a few times. It's never broken, but plenty of scratches on the screen now. Still never going to use a case because I use the official car dock. The screen scratches way too easily though. If I ever break it I'll replace the screen - it is difficult, but nothing compared the the M7 or plenty of other older phones like the MyTouch 4G Slide.

I have always used some kinda case. I have outerboxx defender on HTC one m8. Perfect condition.

I use a case called poetic from Amazon ~$8 and its about same quality as defender otter box just no clip and I use extreme guard tempered glass. Overall nice grip and has lasted so far 8mths
Sent from my HTC6525LVW using Tapatalk

I am using the Otterbox Symmetry case. I like how it is a little thinner and lighter then the commuter case which I originally had on my M8. The rubber power button on the Commuter case started causing my phone to turn off on its own, I have not had the problem with the new Symmetry line Otterbox has.

I've got a moto e (2015) and no case...

Update new phone no case
Sent from my Huawei Y538 on Boost Mobile.

Case on my galaxy s7edge... outterbox
Sent from my SM-G935P using XDA Free mobile app

Screen Protectors & Cases

Anyone have one yet and have some good suggestions? I'm waiting for mine to arrive and don't see alot of options (that I like) on Amazon but so far I ordered these to start:
Screen Protector
Case

Phone and case today came in today .. Good fit and no complaints...same case you ordered...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ordered the Ailiber case, glass screen protector and holster from Amazon. Seems like a good deal at $12.99 until Encased comes out with theirs (which I'm waiting for). According to Amazon there are 19 left and the manufacturer isn't producing any more.

i grabbed the spigen tempered glass screen protector, 2pack used em on both our phones that came today, comes with a frame you use to make alignment easier, honestly easiest screen protector ive ever put on. not sure what i want for a case yet

Just got the official fabric case, feels great, love it. Feels like i have a Nest Speaker in my end haha, same material it seems.
The case seems strong and is slim enough, goes a bit over the display, just like it should to be able to put the device face down, but not too much.
It almost exactly matches the camera bump in terms of height, like a quarter of a millimeter thicker so the glass doesn't touch whatever you put your device on.
All in all, very satisfied.

I have used Spigen Rugged Armor cases for 5 different devices including the 4a5G and am extremely happy with these.
NONZERS screen glass protectors are OKish, as they fit nicely, but the hole for the front camera is a little bit off. The 3 pack come with a mounting frame which makes installation a 30 second task.

Problem with LK screen protectors
So I've noticed this with LK screen protectors. There is always a small tiny piece on the edges that never really properly seals. I've used the same brand on the 4A and the same thing is there as well. Now, to be honest I did take the phone out of the case and went over the spots with a micro fiber cloth and one of them seemed to go away. If you're OCD then it will bug you. If not then it's fine. @zaibas do you have this issue with your Spiegen glass protector?
*Also maybe the case that I'm using but it does collect lint/dust on the edges. Nothing a quick wipedown can't fix.

coolpoete said:
So I've noticed this with LK screen protectors. There is always a small tiny piece on the edges that never really properly seals. I've used the same brand on the 4A and the same thing is there as well. Now, to be honest I did take the phone out of the case and went over the spots with a micro fiber cloth and one of them seemed to go away. If you're OCD then it will bug you. If not then it's fine. @zaibas do you have this issue with your Spiegen glass protector?
*Also maybe the case that I'm using but it does collect lint/dust on the edges. Nothing a quick wipedown can't fix.
Click to expand...
Click to collapse
As crazy as this sounds, I had the same problem on my current iphone se2 and a little olive oil on a qtip fills the gap nicely. I followed someone's guide on youtube and it came out great. 6 months later it doesn't look as good as the day I did it but it's still way better than when I first put the screen protector on, It was a huge ring around the entire screen and looked terrible
Edit: https://www.youtube.com/watch?v=IIQRrbqUBPI

udis said:
As crazy as this sounds, I had the same problem on my current iphone se2 and a little olive oil on a qtip fills the gap nicely. I followed someone's guide on youtube and it came out great. 6 months later it doesn't look as good as the day I did it but it's still way better than when I first put the screen protector on, It was a huge ring around the entire screen and looked terrible
Edit: https://www.youtube.com/watch?v=IIQRrbqUBPI
Click to expand...
Click to collapse
Thanks for posting this! I saw this some years ago, mine is miniscule now so I may just decide to live with it.

Dbrand Skin - Black Camo
So fresh and so clean!! A little patience and a hairdryer is all you need.

coolpoete said:
So fresh and so clean!! A little patience and a hairdryer is all you need.
Click to expand...
Click to collapse
Very clean look bro.
I personally like a case and I always find a clear tpu to be the most grippy. I'm currently going between:
TopAce slim TPU: https://www.amazon.com/gp/product/B08H26MD28/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Spigen (thicker) Ultra Hybrid: https://www.amazon.com/gp/product/B08D65BG5X/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
The Spigen provides a little more protection, while the slimmer one is kinda nice in the hand considering how wide this phone already is.

bkdodger said:
Phone and case today came in today .. Good fit and no complaints...same case you ordered...
View attachment 5134889View attachment 5134891View attachment 5134893View attachment 5134895View attachment 5134897View attachment 5134899
Click to expand...
Click to collapse
What case?
Sent from my Pixel 2 XL using Tapatalk

letrain02 said:
What case?
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Spigen Liquid Air Armor..

Any word on Spigen thin/slim or Ringke slim? The matte black ones that have a soft texture, feel grippy and are very thin.
If not any similar recommendations with good grip and thin?

Sure aren't many 4A (5G) cases to choose from on Amazon. I have the one from Huness coming on Monday for $9. But what about going caseless? Any ideas how scratch resistant the plastic core case is?

I ordered this one, at least until better ones show up. Or maybe it's good enough.
https://www.amazon.com/gp/product/B08K76KN4C/
I need a case because I have a metal plate for the magnet mount in the car. Also, protecting the phone is a good idea when trade-ins come along. My P2XL from 3 yrs ago is still in mint condition and took advantage of the $240 trade-in value for it at the Google Store.

Took plunge from 2XL with $235 trade. Phone still does everything I could ask, just no more updates. Anyone see a difference/downgrade in resolution?
Some stuff sold out on Amazon. Wanted thin case. Went to Spigen direct
https://www.spigen.com/collections/pixel-4a
30% off still active for BF.
Went ahead and got everything here. Liquid Armor, and glass for screen and camera.
Glass seems way expensive compared to what is available in Amazon. Anyone think there is a difference/worth the cost?
Camera protector is new to me. Might as well. Apple rejected a trade in last year because lens cover was cracked.
Liquid Armor...slim and textured with Adequate protection. First time in several generations of devices that I will not have a Diztronic case. Always loved them.
Have also grown used to sticking a pop-up handle on the back. Used to think they are gimmicky....but quickly grew used to it. Still slides in pocket. Really helps with one handed operation and makes phone way more secure in hand. Works as kickstand also! Wonder if there will be a problem with it sticking to the textured back of Liquid Armor?

akenis said:
Took plunge from 2XL with $235 trade. Phone still does everything I could ask, just no more updates. Anyone see a difference/downgrade in resolution?
Click to expand...
Click to collapse
I too think the screen in the P2XL is somewhat better when it comes to font crispness and contrast black on white. Colors seem a bit better on the 4a 5G.
I also agree that I could have gotten another year out of the P2XL if not for lack of updates.
It doesn't feel that the 4a 5G is an upgrade, more like a sideways move.

Delete.

zaibas said:
i grabbed the spigen tempered glass screen protector, 2pack used em on both our phones that came today, comes with a frame you use to make alignment easier, honestly easiest screen protector ive ever put on. not sure what i want for a case yet
Click to expand...
Click to collapse
I got the spigen glass screen protector, and case. I agree the template to install the glass was awesome, and my application looks perfect. Also the case fits perfect around the screen cover. I am glad I went with a name brand, vs crappy stuff off ebay.