[Q] HD2 as external display for pc - HD2 Windows Mobile 6.5 Themes and Apps

Is there a program with which I could use my HD2 as an external display for my laptop. I don't mean remote control software.

Try SideWindow.
I know I used something else with my old Artemis, something free but I can't find it anymore. I remember installing the driver on my Vista x64 and having a really small second monitor in my control panel, I think it was based on VNC but it did work through wifi without active-Sync

Tried to install it, but without any luck on windows7...

This is the soft I used:
ZoneOS ZoneScreen for Windows Mobile
I tried again with my HD2, and, yep it works against an XP (using the 32-bit display driver), but can't see to load the driver on my vista x64, even disable the digital certificates.
I managed to get a second display on my XP box with a rel of 800x480 using a wifi connections.
Have a look at their wedsite, maybe they have some new driver for Vista/Win7
http://www.zoneos.com/zonescreen.htm

Related

Windows Mobile Device Center woes

I recently flashed my ROM from WM5 to WM 6. Thank you XDA. The problem I am having is now my Vista Computer won't connect with my MDA. Before the Flash it snyc fine. I uninstalled WMDC and reinstalled it and nothing. WMDC is aweful, Active Sync is great. Help maybe it is some kind of trick to get Vista to recognize it again with the new flashed WM6.
make sure you are using Active Sync. ver 4.5.....?
with some roms you have to uncheck the box "USB-PC" Found in settings/system/or sometimes found in connections,"USB-PC" and uncheck Enable advanced Network functionality. Then try and Sync
I can't use Active Sync with Win Vista. Any other suggestions..?
Then restore Vista to when it was working.
I'm also having trouble with Vista Ultimate (x64 and x32) and my Wizard (Octavoi's ROM)
It sees my device for a few seconds and then it closes.. The WMDC doesn't see my device at all...
The Event Viewer shows the following:
Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop.
Click to expand...
Click to collapse
Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code).
Click to expand...
Click to collapse
Does anybody know how to solve this?
I've tried to uncheck the 'Advanced Network Functionality', but that also doesn't seem to work.....
Firewall could be the culprit.
Check your settings in your firewall. If you have Windows OneCare that would also interupt your connection with WMDC. But with any firewall program make sure that it allows or is in the trusted mode for any Windows Mobile Device.
I have Windows Live One Care but I don't think that's the problem.
I turned it off and tried to connect... without succes
But I'll give it a try again this afternoon.
i'm the other way, i went from vista to xp at work because of stupid autocad 2008 problems (don't get me started) and i prefer wmdc over activesync.. i have ver 4.5 and i have issues like it sometimes will randomly disconnect or won't complete a sync. other times i have no issue though. I never had a problem on vista with wmdc.
when i first hooked up my pda in vista it would load the driver in vista but, wouldn't connect, turned out it was loading an older driver and i manually updated to the newest one and just like that it was connecting, later i downgraded the driver to be able to update the rom and it was still working.
pyrorob said:
when i first hooked up my pda in vista it would load the driver in vista but, wouldn't connect, turned out it was loading an older driver and i manually updated to the newest one and just like that it was connecting, later i downgraded the driver to be able to update the rom and it was still working.
Click to expand...
Click to collapse
Where did you get the newer drivers from?
Try this :
Go to device manager in Vista
While connecting your wizard the device manager should refresh and add a 'MS Windows Mobile Remote Adapter'
Now right-click that adapter and choose 'uninstall'.
Vista will add the device again and soon after WMDC should connect.
At least it worked for me...
sysarck
sysarck said:
Go to device manager in Vista
While connecting your wizard the device manager should refresh and add a 'MS Windows Mobile Remote Adapter'
Now right-click that adapter and choose 'uninstall'.
Vista will add the device again and soon after WMDC should connect.
At least it worked for me...
sysarck
Click to expand...
Click to collapse
I tried the same, but without luck.
Ok, I've flashed my phone and now it seems to work with Octaivoi 6.3!!

O2 Exec - Remote adaptor problems.

Hi All,
I have installed Vista business, then I installed SP1, and that is where my problems started.
The driver cache became corrupted, I've managed to sort that out however in the meantime I can't get my O2XDA (aka htc universal) connected.
The behaviour is thus.
Plug in PDA, new hardware found, and Vista installs the pocket pc usb adaptor, (well, I think it dose.. but do not see it in USB devices..) then vista tries to install the MS remote mobile adaptor, it finds a driver, but then barfs that the required registry key dose not exists.
I do have WMDC installed etc, and the update.
I have googled etc, but can't seem to find anything with similar symptoms, and MS are not being that helpfull, asking me to just disable everything and try again, new profiles etc etc..
I can see where this is going, but I really don't want to re-install Vista just for the sake of one thing not working (I've fixed everything else that SP1 screwed up...)
Many Thanks
MarkA
Sussex, UK

Windows crashes nearly everytime

Hi all
i have a problem.
its not related to only one pc but all windows xp machines ive used ( im not going down vista route at all).
nearly everytime i connect my phone/ppc to windows, it crashes, ie, i get the windows 32 process host or something has an error then the RAPC window with 1 minute countdown comes on and my computer crashes or restarts.
then if i connect my ppc, its fine.
its not only with 1 pocket pc, its with the 2-3 ive tried.
they all run windows mobile 6 or 6.1...
anybody have the same problem and know what to do? activesync 4.5, u can see the icon connecting and it has made the noise its found the pocket pc, then bam...
i couldnt find this topic anywhere in xda, dont know where else to look
Cheers
It is not the PPC's at all - rather incompatible hardware on your desktop, such as an installed dial-up modem or other network device.
I had similar difficulties back in time on a Dell desktop until I removed a special DS Sound Card. A friend of mine had similar problems until he removed - following my recommendation - his dial-up modem card.
You will have to figure out what device on your desktop causes this incompatibility - please: before plugging out anything, remove the installed drivers first!
oh man. they are both laptops. thats going to be tough to remove something/uninstall drivers - doable but its going to annoy me everytime i log in
Hmmm,
try running your pc in save mode and run only what is needed for ActiveSync to work - not a nice solution but at least you can determine if this is an incompatibility issue or not.

Help - can't sync Fuze to Windows 7

I upgraded from Windows XP to Windows 7, and now my Fuze won't sync at all. When I plug it in, the computer detects it as a storage device, but does not recognize it as a smartphone. I've tried uninstalling and reinstalling the Mobile Device Center, resetting the phone, etc., with no luck. Has anyone else run into this problem and know how to fix it?
are you clicking active sync on your device when you plug it in?
klash said:
are you clicking active sync on your device when you plug it in?
Click to expand...
Click to collapse
Yes.
I justed tested out tethering - strangely, that all works fine, both by USB and Bluetooth, as does using the Fuze as an external drive. Just can't sync.
Well, weird, it works now. After trying for ages with resets and reboots, etc., etc., this time when I plugged it in it worked. I'm not sure I did anything different.
I believe if you have Windows 7 Pro or higher (Ultimate) there is a virtualization option for Windows XP, where you should be able to run any type of application that is 100% same as Windows XP. That way you can work with the instructions for WinXP. Hope that helps!

Can´t connect mass storage on Windows XP SP3

Hi,
Recently I made an installation of the Infused ROM 2.2.3 and Infusion OC kernel on my device, but I can´t make any USB connection (mass storage) to work properly on Windows XP SP3 with Samsung Modem installed, and Samsung SGH-I997 drivers too, Kies installed and etc... when device connects and show the 2 external units, and when begin to copy files between PC and phone device disconnects automatically, and sometimes freezes the entire windows explorer... what I´m doing wrong?
This is both in Windows XP SP3 and Mac OS X 10.6.8, in mac, device simply doesn´t appears... notice that Kies on mac is on version 1.0... and in Windows is on 2.+...
rikochet33 said:
Hi,
Recently I made an installation of the Infused ROM 2.2.3 and Infusion OC kernel on my device, but I can´t make any USB connection (mass storage) to work properly on Windows XP SP3 with Samsung Modem installed, and Samsung SGH-I997 drivers too, Kies installed and etc... when device connects and show the 2 external units, and when begin to copy files between PC and phone device disconnects automatically, and sometimes freezes the entire windows explorer... what I´m doing wrong?
This is both in Windows XP SP3 and Mac OS X 10.6.8, in mac, device simply doesn´t appears... notice that Kies on mac is on version 1.0... and in Windows is on 2.+...
Click to expand...
Click to collapse
Drivers are not necessary for USB mass storage mode.
Are XP and MacOS on the same dual-boot machine or are these different machines?
I know one of the ports on my Asus laptop is weird and constantly disconnects the phone - it's limited to just one port and the rest work fine. Maybe you have something similar.
Entropy512 said:
Drivers are not necessary for USB mass storage mode.
Are XP and MacOS on the same dual-boot machine or are these different machines?
I know one of the ports on my Asus laptop is weird and constantly disconnects the phone - it's limited to just one port and the rest work fine. Maybe you have something similar.
Click to expand...
Click to collapse
I have an iMac with Mac OS X 10.6.8 (x64) Bootcamp and WinXp (x86) installed, primary boot system is XP SP3, well... I´ll check usb ports, hope this helps to solve this...
in my office machine (HP Windows XP Pro x86) I have kies and drivers installed too, but this machine works so fine all the time, when I connect the phone, explorer displays the two units and it can copy/paste files between PC/phone without disconnecting, connection is stable...
... maybe I should get the Samsumg i-9000 drivers instead of SGH-i997 due to I´m on Infused 2.2.3??
What the hell is Windows XP?
Sounds like a driver conflict kies doesn't play well with win 7 64. I know from personal experience
Try uninstalling all drivers and kies then reinstall drivers only, I think xp has generic drivers for usb mass storage so if you just need that then connect it without installing driver's.
Also make sure your data cable is good. Try a new one. They are cheap on Amazon
Sent from my SAMSUNG-SGH-I897 using xda premium
shadow65781 said:
Sounds like a driver conflict kies doesn't play well with win 7 64. I know from personal experience
Try uninstalling all drivers and kies then reinstall drivers only, I think xp has generic drivers for usb mass storage so if you just need that then connect it without installing driver's.
Also make sure your data cable is good. Try a new one. They are cheap on Amazon
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Since it affects XP and MacOS on the same dual-boot machine but doesn't affect his work machine - I suspect it's a USB port problem.
Try this...
Were you able to go into mass storage mode prior to flashing the ROM?
If so, maybe your USB Ports are looking for something that to them isn't there...every time that you connect a usb device, your computer creates a record in the usbstor section of the registry. You can manually delete these by using regedit and heading to the key:
HKEY_LOCAL_MACHINESYSTEM\CurrentControlSet\Enum\USBSTOR
Remember that making changes to your registry can have some undesired results, but this one is pretty safe.
Alternatively, you can go to this site http://www.nirsoft.net/utils/usb_devices_view.html and use USBDeview to disable any old keys or such.
Don
maybe... I don´t know why but its on both systems on iMac machine, device attempts to connect and a milisecond after that, connection rejects and reconnects then reject a bout a three times like it was shortcircuit... like I was saying, in my HP (work machine) works like a charm, even in USB debugging mode, or not, so...
wvmedic said:
Were you able to go into mass storage mode prior to flashing the ROM?
If so, maybe your USB Ports are looking for something that to them isn't there...every time that you connect a usb device, your computer creates a record in the usbstor section of the registry. You can manually delete these by using regedit and heading to the key:
HKEY_LOCAL_MACHINESYSTEM\CurrentControlSet\Enum\USBSTOR
Remember that making changes to your registry can have some undesired results, but this one is pretty safe.
Alternatively, you can go to this site http://www.nirsoft.net/utils/usb_devices_view.html and use USBDeview to disable any old keys or such.
Don
Click to expand...
Click to collapse
I will try it and see what will happens... what could it be?
a driver problem?
another thing that I forget to mention is that I installed drivers manually, actually I live in a block without any wi-fi network! and my Windows XP could not get drivers via Microsoft Update, so, I don't know if this is a factor too

Categories

Resources