Hi, I am trying to find the MAC address for my BenQ e72 for 1 week, but still couldnt find. I have googled it thousand times but no result. Can anyone help me with finding the MAC address?
MAC address for which interface? You have MAC address for the WLAN - which you can read from the router you are connected to (or WIFI connection properties in WM6). The Bluetooth MAC address should be possible to read from the BT configuration in the device or similar to the WIFI strategy from a device where it connects to - e.g. the Laptop if it has BT.
Why do you need the MAC addresses?
I need mac address for WLAN. Beacuse i have to register my university's wireless network with my mac address in order to use the internet.
Related
Where do I set the LAN (WiFi) Computer name in the Captivate. My router has functions that require either the host name or the IP address of the host. Using the host name for DHCP clients makes it a lot easier to configure some of these settings. The way I'm currently doing it by reserving an IP address for the MAC address of the Captivate WiFi NIC.
I can see where the host name can be changed for Bluetooth, but not for WiFi.
Good question, I dont know. So far from what I've seen when looking in my wifi router while connected, the phone doesnt have a "name". The name field is just blank, all it shows me is the mac address of the phone, and the IP address assigned to the phone.
I've looked under wifi settings and advanced wifi settings and dont see anything.
I've read other thread about changin MAC address via ADB or Terminal Emulator with the command
`busybox ip link set eth0 address nn:nn:nn:nn:nn:nn`
This appears to change it temporarily on my rooted SGS, but after I try and connect to the wifi, it gets switched back to the hardware MAC.
Reason I'm attempting this is because my building wifi only allows me to connect 1 computer. They have the wifi un-locked by restricted to MAC addresses. So I want the ability for my phone and my laptop to have the same MAC addresses, so that I can connect them both (but one at a time) to the wifi. No they will not allow me to add another device, so I need to clone the MAC address....
So with that said, how does one change the mac address in the SGS.
More threads:
forum.xda-developers . com/showthread.php?t=750596
I also tried to use
`ifconfig eth0 hw ether nn:nn:nn:nn:nn` as I would under linux, but to no avail.
Any assistance would be appreciated.
Cheers
Jordan
I have a Samsung Galaxy S Captivate and I was NOT able to spoof my MAC address either using the above mentioned commands. Any other ideas?
may i suggest a micky mouse?
why not take out the laptop and add the samsung's mac address?? tell them you got a new laptop ect?
its easier to spoof the mac address in a laptop
any news?
i need to change address too ...
if you have a Ethernet line in your apt just get a wireless router and disable broadcasting.
Leviuqse said:
may i suggest a micky mouse?
why not take out the laptop and add the samsung's mac address?? tell them you got a new laptop ect?
its easier to spoof the mac address in a laptop
Click to expand...
Click to collapse
Theoretically sound, but practically not applicable. I have many MACs of my friends at work (institution) and I want to use any of the MACs on my android.
It is possible. i have given procedure for LG Optimus One. Same can be used for u'r phone. Just have to locate nvram.txt file. and appen line "macaddr = XX:XX:XX:XX:XX:XX" Where "XX:XX:X..." is u'r new mac address.
Here's the link
http://forum.xda-developers.com/showthread.php?t=917684
Not working
Sensation 4g connect pc on another subnet on LAN.
Can you please help me to connect my Pc behind second router.
I have 2 routers at home :
Tplink and belkin ...the tplink is giving internet to the belkin and when i am connected to the belkin i cant acces a pc with my sensation which is connected to the tplink.I am using ES Explorer to brawse the files but it is not giving me option to brawse by PC name and only by ip address.And when i try to connect the pc on the tplink network it is not finding it.
Tplink network is : 192.168.1.1 to 255
Belkin Network is : 192.168.10.1 to 255
Any help ?
any help ?
nobody knows ???
zhelev81 said:
Sensation 4g connect pc on another subnet on LAN.
Can you please help me to connect my Pc behind second router.
I have 2 routers at home :
Tplink and belkin ...the tplink is giving internet to the belkin and when i am connected to the belkin i cant acces a pc with my sensation which is connected to the tplink.I am using ES Explorer to brawse the files but it is not giving me option to brawse by PC name and only by ip address.And when i try to connect the pc on the tplink network it is not finding it.
Tplink network is : 192.168.1.1 to 255
Belkin Network is : 192.168.10.1 to 255
Any help ?
Click to expand...
Click to collapse
This is a wrong thread for this topic, it has nothing to do with Sensation......anyway, I'll share with you my own experience, hope it helps.....
I'm using a Dlink (ADSL modem router) and a Cisco WiFi router, the connection is like:
Internet -> Dlink -> Cisco -> (pc, phone, tablet, nds, etc)
Setup for Dlink:
IP : 192.168.1.1
Subnet : 255.255.255.0
DHCP is enabled
IP range : 192.168.1.3 ~ 254
Connected to internet via PPPoE/PPPoA
Setup for Cisco:
IP : 192.168.1.2
Subnet : 255.255.255.0
DHCP is disabled
Take note that the connection between Dlink & Cisco is LAN port to LAN port, the internet port on Cisco is not used. This way, no matter you're connecting to Dlink or Cisco you'll get an IP in the same subnet (192.168.1.3 ~ 254) which is assigned by Dlink.
I'm no expert in networking, this is what I get after consulting a couple of experts and I just follow exactly. In my situation, things work perfectly that I can see the whole network neighborhood, share folders/files, share printer, etc.
i cant use the same subnet because my belkin router cant work if i do so ... must other solution?
zhelev81 said:
i cant use the same subnet because my belkin router cant work if i do so ... must other solution?
Click to expand...
Click to collapse
Well, this is beyond my knowledge to help. Maybe you can checkout the following link and post your question there, the experts there probably can help you solve your problem.
http://www.tomshardware.com/forum/30502-42-router-router
i want to change my mac address but after mac spoofing my device does not connect to wifi
my device is rooted
i have installed busy box
but when i try to change mac adress using any app like mac address ghost , mac address spoofing etc
but when i change the mac address the app says mac address succlesfully changed but does not conect to wifi
but when i change my mac address to orginal it works well but i want to change my mac adress and use wifi
i tried to forget the network and recconect wifi ...still does not work
i tried to connect to other network still does not connect and i tried to connect in other ways but still does not connect
plz help
Hello every one. .... I spoofed the adress of the targeted client mac adress in my android device.. And i can able to connect to the mac filtered target router but the connection is not stable my device is constantly disconnecting from routerif the clint with original mac address is present
in case if he discounted from the network i can able to use the network stably without disconnect
I searched google some sites they adviced to use static ip but it also not give effect same problem leads please.. Help with any solution..
Sry for my poor English