Hey All,
I have a Diamond, and a cardo rider Q2 for my motorbike helmet. They pair up nicely for phone calls, but I cannot get music to stream to the helmet.
All other functions work fine. If I press a button on the phone the sound of the button comes through.
The annoying thing is that my friend has a N95 and it works just fine, so I know the headset is capable.
Is there some setting that I need to change? Or a download to fix this?
Any help would be appreciated. And please take it easy on me as I am not very capable with technology.
Thanks In advance
Adam
Adam,
Double click on the icon of the paired headphones on the bluetooth screen and make sure that Wireless Stereo is ticked.
The system is using two profiles- one for phone calls (headphones) and the other for music (Wireless Stereo). Yout helmet BT earphones should be able to switch in between as long as they are enabled.
CD
Hey CD, thanks, I tried that, but..
When I do that it only gives me the option of "hands free".
If I plug in my wired HTC head phones while maintaining the blue tooth connection to my helmet and play music the music comes through the wired headset, but when I try to voice activate an outgoing phone call the music changes from the wired headset to the bluetooth headset temporarily.
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
dave.ski said:
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
Click to expand...
Click to collapse
I have the same Jabra 320's... finally got them working as Wireless stereo pressing the main button again and again during pairing... I didn't know it was going to work - It was out of frustration!!!
I tried several times with my 320's (deleted, re-installed, tried different ways/software) all to no avail.
There is a software upgrade for the 320's on the Jabra site but you need a special usb connector to flash the unit.
In the end I picked up the newer BT3030 cheaply on e-bay and they were recognised straight away as Handsfree and stereo BT streaming.
Both the 320's and 3030's have the A2DP profile, so not sure why the don't see the 320's correctly?
So happily cycling to work again with the BT3030 and listening to BT stereo.
In order for you to do what you want your headset must support A2DP Bluetooth profile (and even if it does it may not work!). That is the profile needed to send stereo music from the HTC. Most handsfree units do not do that - they just support headset and handset Bluetooth profiles.
There is a utility available called BTMusic that can be downloaded free from here. This will allow music to be sent using the headset or handset Bluetooth profiles, and it worked with my Parrot car kit, so it may work for you. The problem is that it is mono only and the quality of the sound is not brilliant - after all these profiles were never designed for that.
So the alternative is to find a new headset that supports both handsfree and A2DP profiles and works with both.
umm yea... i went through EVERY SINGLE thread this thing has. none of the programs work for me period.
I am attempting to pair an ATT Tilt with an onboard bluetooth device on a GL1800 Goldwing Motorcycle. It pairs but, I cannot hear the person on the other end. It rings in the headset, connects fine, outgoing audio reaches the other party but incomming audio never reaches my headset.
Any thoughts?
Thanks
Tom
i have similar issue on this with my bimmer
I'm on CM7 ALPHA 3 with sound_fix_update.zip installed to make my jawbone bt work and Wifi-Calling_Patch_v1.0.5.zip to get the wifi calling to work. The CM7 has a problem with sound through bluetooth so after installing the patch the sound worked perfectly for calls (not for media, but I can live with that for now). However, after installing the wifi-calling patch when I'm trying to use wifi-calling the sound gets routed to the handset and doesn't come through the bluetooth. when the call first initiates I can hear it for a sec on the bluetooth and then it immediately gets routed to the handset. I checked with regular headphones it doesn't even work with that either. When wifi-calling is off however, I'm able to use my bluetooth as normal for calls. Anyone have any ideas?
I just got a Bluetooth headphone/headset (with mic) to use with my GT7+ (GT-P6210 wi-fi only) and my semi-smart phone. The headset (Motorola MOTOROKR S305) has three different pairing modes: music only, phone only, and both.
When I pair it with my little phone, it automatically pairs as both. It works fine as a phone headset (mic and earphones), and it works fine as a stereo headphone with the phone's music player.
When I pair it with my GT7+, it automatically pairs as music-only. There is no microphone function. With Bluetooth off, I can make calls using the GT7+ built-in mic and speaker and the GrooVe IP app. No problems. But with the Bluetooth headset paired, I just don't get the mic function. I can hear the phone audio in the earpieces, but the mic is dead.
Is there any workaround? Is there a way to get the GT7+ to identify itself as a phone-capable as well as music-capable device for the purpose of Bluetooth pairing? (That's what I think must be missing.)
TIA.
I can't speak for that particular headset but I successfully use a jabra (phone headset only) and GV with my tab plus. However, before I had a A100 tab and I had similar mic problems with the same jabra headset...so the whole compatibilty thing seems to be hit or miss.
I assume you checked settings to confirm there are no options to adjust mic? Also, you might see what happens if you pair and use GV right after boot.
jhorner said:
I can't speak for that particular headset but I successfully use a jabra (phone headset only) and GV with my tab plus. However, before I had a A100 tab and I had similar mic problems with the same jabra headset...so the whole compatibilty thing seems to be hit or miss.
I assume you checked settings to confirm there are no options to adjust mic? Also, you might see what happens if you pair and use GV right after boot.
Click to expand...
Click to collapse
I did check settings and I didn't find anything relevant. I also tried pairing while GrooVe IP was running and logged into GV. I'll try that again right after boot. Thanks.
Hello
I’m trying to resolve an issue i have with my Sony MW1 Bluetooth headset when doing Skype or Hangouts calls
For some reason when using a Bluetooth headset (Used a Sony MW1 Smart Wireless Headset Pro, set and a Fiat Blue&Me Car Bluetooth) the sound keeps breaking off both for me and the person I’m calling. I get long brake after witch the sound returns for a while.
I tried LTE/HSPA and WiFi calls all with the same result
When using a wired headset there is no issue like this. nor do I have the issue when i do regular phone calls using the sets
Furthermore sometimes the Bluetooth sound doesn’t turn on at all, so I get no sound neither on the loudspeaker nor on the Bluetooth set although the BT volume is set to max
Any idea how to resolve this?