For those of you who are interested in PsfMOD PL3 for your PS3, klutsh has created a modded recovery for the HEROC that now has psfreedom option..
It is working 100%
Note this is a new recovery and will replace your current recovery...
Please see link:
http://psfmod.klutsh.com/
There is also modded recoveries for:
HTC desier
Nexus One
Evo 4G
Droid
HTC Hero CDMA & GSM
Droid Eris
AND Please make sure you buy klutsh a coffee for his hard work!
Coffee link ( also found at the bottom of his web page )...
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8GK4UPDRZ2BAC
I wish I could try this out, but my PS3 is 3.50 :/
From the changelog
0.9.7.0
[25/10/2010]
rewrote to fit mdpi screens ( 320x480 )
fixed Heroc boot issues introduced lite version - adb & mass storage do not work
So adb and mass still do not work
Curious so I have to flash this to use the mod for the ps3 then reflash a different recovery to use adb????? Any input would b more than welcomed thanks in advance
Root-Hack-Mod-Always™
Yes, if you want to use adb from the recovery menu, or mount the sdcard on your pc through recovery...you have to flash a different recovery to do both those. What is funny is that both worked (adb and mass storage) in previous versions...before he made the lite version. I dont really know what did not work about it. I may test both on my phone and see, but be sure to check the changelog as .4 does not include a patched payload
Or you could d/l 0.9.6.5
here
and maybe 0.9.6.4
here
Thanks for the response the feed back is greatly appreciated if you can would u mabey b able to provided a link or point me in the right direction on were I can find out detailed info on this that's if you can thanks in advance
Root-Hack-Mod-Always™
laie1472 said:
Curious so I have to flash this to use the mod for the ps3 then reflash a different recovery to use adb????? Any input would b more than welcomed thanks in advance
Root-Hack-Mod-Always™
Click to expand...
Click to collapse
only in recovery, this will not change anything when the phone is running and booted up
i was never able to load those older recovery's but the new one does work for me....
As for the ADB and USB working in recovery? Not sure that ever worked and i have tried several diffident recovery's that were never released publicly and those didnt work either.
No biggy for me as i have no need to use ADB or USB in recovery..
as for the PL3 ? works perfect ...even got MOH working with no problems at all
Using Gaia Manger 1.2
Forgot to say this PL3 Recovery allows game updates and also patchs the requirement of 3.42 firmware games.
The lack of ADB & Mass Storage is down to the kernel.
Hero/c & Eris use a 2.6.29 kernel, these run the msm_hsusb driver, as such the patch used on the other devices (Desire, N1 etc) to allow ADB & Mass Storage does not work.
It will be possible to add ADB back once a 2.6.32/5 kernel (one that uses a native msm72k driver) is fully ported to the Hero/c.
Can someone please explain what this will do. I have a PS3 and never have messed with it. Will this allow you to download games to hard drive or bypass having to upgrade to the new update? Let you controll the masses with a click of an X? Clean the garage with a swipe of in "O"
Thanks for being understanding with my lack of knowledge
Macanage said:
Can someone please explain what this will do. I have a PS3 and never have messed with it. Will this allow you to download games to hard drive or bypass having to upgrade to the new update? Let you controll the masses with a click of an X? Clean the garage with a swipe of in "O"
Thanks for being understanding with my lack of knowledge
Click to expand...
Click to collapse
In short this allows you to jailbreak your PS3 .. due to the rules of this forums i cannot go to full details but if you search google for PS3 Jailbreak you will get the info you need ...
This recovery will do 100% what USB keys claim to do ....
hey guys. my ps3 broke last year. got the yellow light of death but my gf is getting me another for christmas. i was wondering if anybody could pm me and help me out on this whole jailbreaking the ps3? thanks
ok i got the recovery installed and watched videos on how to do everything. now my only question is.... i only have the option of up to firmware v.3.41. and when i get mine it will probably come with v.3.50. so what should i do? is this recovery pretty much useless now? cause i couldnt find any payloads for 3.50
PSF is only compatible with firmware 3.41 and lower.
Sent from my HERO200 using XDA App
so im pretty much screwed? ive seen the downgraders but you cant play online without having the latest update. well i appreciate your help man, thanks
found this http://www.ps3-hacks.com/file/200 maybe this will be useful to someone.
cp0020 said:
so im pretty much screwed? ive seen the downgraders but you cant play online without having the latest update. well i appreciate your help man, thanks
Click to expand...
Click to collapse
If you care about playing online, then yeah., but that teamm is currently working on a version that let's you play online.
Sent from my HERO200 using XDA App
ok. i really appreciate your help man, big thanks
Anyone get the psfservicemod to work? I'm getting stuck on the splash screen
Related
How to root Viewpad 7?
Anybody suceeded?
Ok,
Use SuperOneClick, just make sure to click 'run as admin' if win7. That was were I screwed up.
In case you have issues here is a step by step:
a) Download the latest version of Super One Click (currently 1.6.5).
b) Place your Android device into debugging mode, and connect to computer.
c) Right-click the Super One Click executable and select 'Run As Administrator'.
d) At program launch select 'rageagainstthecage' exploit method, then select 'Root'.
e) If there is no activity for more than 30 seconds and the terminal display is stuck at 'Running rageagainstthecage....' remove the USB plug momentarily and plug back in.
f) You should get the message “***IF IT KEEPS LOOPING, TRY DISABLING USB DEBUGGING NOW***” followed by an ADB reset, waiting for device, and finally a successful rooting message. (Apparently the looping issue is a known bug).
g) Once this process is complete your prompted to test the root condition. Follow the steps to verify.
Yes, I rooted it that way. Thank you very much!
How about unroot with Super One Click, does it work too?
lakehousetech said:
In case you have issues here is a step by step:
a) Download the latest version of Super One Click (currently 1.6.5).
b) Place your Android device into debugging mode, and connect to computer.
c) Right-click the Super One Click executable and select 'Run As Administrator'.
d) At program launch select 'rageagainstthecage' exploit method, then select 'Root'.
e) If there is no activity for more than 30 seconds and the terminal display is stuck at 'Running rageagainstthecage....' remove the USB plug momentarily and plug back in.
f) You should get the message “***IF IT KEEPS LOOPING, TRY DISABLING USB DEBUGGING NOW***” followed by an ADB reset, waiting for device, and finally a successful rooting message. (Apparently the looping issue is a known bug).
g) Once this process is complete your prompted to test the root condition. Follow the steps to verify.
Click to expand...
Click to collapse
Now let's put Gingerbread or Honeycomb on it!!
I'm working on an AOSP port of Gingerbread for the Viewpad 7 as we speak. Once I can get the basics working I'll open a dedicated thread.
lakehousetech said:
I'm working on an AOSP port of Gingerbread for the Viewpad 7 as we speak. Once I can get the basics working I'll open a dedicated thread.
Click to expand...
Click to collapse
Really??! That's donation worthy man.
Edit:Then the only thing that would be missing is some way to do TV out. Any ideas?
ZenInsight said:
Really??! That's donation worthy man.
Edit:Then the only thing that would be missing is some way to do TV out. Any ideas?
Click to expand...
Click to collapse
I don't know of any way TV out would be possible since there is no mini-HDMI port on the device. One of the main things that should be fixed is HD video playback. It really seems like Viewsonic rushed they're tablets to the market. Aside from that and lack of Flash I think it's a great tablet...especially for a developer. Having the 3G radio and GPS is really nice, as well as the screen compatibility mode.
lakehousetech said:
I don't know of any way TV out would be possible since there is no mini-HDMI port on the device. One of the main things that should be fixed is HD video playback. It really seems like Viewsonic rushed they're tablets to the market. Aside from that and lack of Flash I think it's a great tablet...especially for a developer. Having the 3G radio and GPS is really nice, as well as the screen compatibility mode.
Click to expand...
Click to collapse
The Viewpad 7 doesn't have flash! What?
ZenInsight said:
The Viewpad 7 doesn't have flash! What?
Click to expand...
Click to collapse
It uses a Qualcomm MSM7227 ARM11v6 processor with Adreno 200 graphics, clocked at 600MHz. It's been benchmarked in direct comparison to it's 1GHz Snapdragon cousins, so don't let the clock speed fool you (performance would be comparable to the original Motorola Droid). It's certainly capable of running Flash, but Adobe has been less than forthcoming about releasing a version which will support this architecture.
There are many other devices using this chip that have been released just a couple months ago, so it is still very much in wide use. I don't think anyone has ever found a workaround (aside from using Flash Lite). So until Adobe comes around, we'll be stuck using Skyfire.
lakehousetech said:
I'm working on an AOSP port of Gingerbread for the Viewpad 7 as we speak. Once I can get the basics working I'll open a dedicated thread.
Click to expand...
Click to collapse
I just got my Vpad7 yesterday, and i'm already annoyed at the default 2.2. Even as rooted, my milestone with 2.3.3. still outshines it.
I cant even find an update.zip it'll accept. So when you got something worth testing, or a kernel worth booting, please allow me to test it
superone click superb!
DocNielsen said:
I just got my Vpad7 yesterday, and i'm already annoyed at the default 2.2. Even as rooted, my milestone with 2.3.3. still outshines it.
I cant even find an update.zip it'll accept. So when you got something worth testing, or a kernel worth booting, please allow me to test it
Click to expand...
Click to collapse
I'm stuck at the moment on the boot.img, but once that's done the rest should get a little easier. I've attached the original launcher apk and dex for Doc. Hope you can get your tablet fixed up again.
rooted viewpad 7
hi all i have succesfully rooted my viewpad 7 but im still unable to install custom roms i took off some apps from my htc hero but none of those will install i have downloaded custom roms home brew but they fail to install has anyone else had this problem and how can i resolve this thanks spursfan1965 gooners welcome lol
spursfan1965 said:
hi all i have succesfully rooted my viewpad 7 but im still unable to install custom roms i took off some apps from my htc hero but none of those will install i have downloaded custom roms home brew but they fail to install has anyone else had this problem and how can i resolve this thanks spursfan1965 gooners welcome lol
Click to expand...
Click to collapse
Does anyone VIEWPAD 7 owner know WHY it not support flash 10.1 ? it is android 2.2 offical version ?
thanks
James
keijames said:
Does anyone VIEWPAD 7 owner know WHY it not support flash 10.1 ? it is android 2.2 offical version ?
thanks
James
Click to expand...
Click to collapse
Because Adobe decided not to support the ARM11v6 processor architecture, even though they had a working build for it. You can use Skyfire browser to watch flash videos in the meantime.
BTW, guys, where to get and how to install custom recovery on Viewpad7 ?
I can't install custom ROM, reason of stock recovery wan't install unsigned update.zip ;(
Hallo guys..
I tried on my viewpad7, superoneclick 1.7 on linux ubuntu.. but no success.. any hint for me?
always stop at
chmod..
I read to do a adb reset, but I am a bit ..
For the recovery rom I saw in modaco that there is a clockwork recovery rom ad hoc.. but I need root to install it.
ahh, before root it, I wish to have a backup, anybody know a way to backed up the original rom ?
thank you!!!
Per request I've created a separate thread documenting the installation of alternative recovery partitions and installing custom firmwares. You can find it here:
http://forum.xda-developers.com/showthread.php?t=1015005
Hello,
no it sounds that in linux the SuperOneclick doesn't work with this viewpad7..
I read some groups in germany and only windows 7 ... umm
But really there is no way to backup the rom before root?
I am in with adb .. but read not permitted..
Sorry i cant work on this anymore because i lost defy. Sorry guys
Hello guys,
first of all, i am no where near a developers level, but being somehow geeky at linux and android stuff, i am trying to port MiUi ROM for motorola milestone to motorola defy. I havent succeeded till now, but i will try my best to bring MiUi goodness to Defy phone users. I worked all night last night, trying to do different stuff every time hoping it works, but everytime i do anything, all i get is the big a$$ motorola logo. I need some developer's help on doing this.
The main problem has been motorola's locked bootloader, which does not let me flash updated zip files, unless i flash the original sbf, log into motoblur, root it, install recovery, boot into recovery and finally install. And trust me, i did all of that like 10-15 times last night. Even my phone must be pissed off at me right now cuz of that If there is an easier way,please, please please let me know.
I have tried everything from replacing apps, extracting boot.img, replacing framework files, installing directly, using kitchen for htc to automatically replace and almost eveything i could think of, and still no success. I really need help from someone who can debug kernels and sneak into bytecodes.
You are really welcome to help me if you think that you could help in any ways. Please shoot me an email at zed [at] wireshock.com (i will usually reply asap), or add me in gtalk admin [at] wireshock.com so that we can talk about it. Lets all hope that we can see miui in defy some day. Wish me luck
Edit: Here is the final thing i came up with, if anyone wants to examine, here is the link -> Click Here
PLEASE NOTE THAT THIS WILL NOT WORK! IT WILL NOT BOOT! THIS IS FOR DEV'S ONLY!
March 29
Update (9:40 AM): Another night without success. I am trying my best to make it work. Few people have contacted me about this, and some have helped a lot. Thanks to them. I contacted eugene_373 about this, lets hope he replies fast.
Update (11:48 AM): @KSubediTweet My Defy no longer works... So, not much help I can give. <- Eugene's defy doesnt work, need some devs who work for defy.
Update (5:54 PM): Me and Landroid from xda worked for almost the whole day trying to make it work. No success till now, but i think we are closer than before. If anyone finds a way to run recovery without booting somehow, please let me know, that will help a lot. And be sure to say thanks to Landroid for helping me out a lot.
April 6
Update (10:53 AM): Spent the last week trying to figure out a way to run recovery without booting which would help me save 80% time. Need some more Dev's help. I have tried contacting some chinese miui developers so that they could help me on porting the rom. Waiting for reply.
April 7
Update (8:35 PM): I think i finally found something that can help! Check this out -> http://forum.xda-developers.com/showthread.php?t=1026853
April 13
Update (8:14 PM): After few days of being idle, i am back to the track. Now as i have 2nd init, pre boot menu and everything i need to work, i will try as fast as i can. And racca pointed out some stuff i didnt know before, so i am kind of positive about getting it to work this time.
P.S. All times are MST (GMT -7)
I don't have much technological knowhow to add, but good luck and its great that someones finally making the effort, so don't give up!
Sent from my HTC Vision using Tapatalk
tbman1996 said:
I don't have much technological knowhow to add, but good luck and its great that someones finally making the effort, so don't give up!
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
Thanks, ill try my best.
Eugene made some adaptations on system recovery to apply update.zip. I don't know exactly how that works but maybe help you.
link: http://forum.xda-developers.com/showthread.php?t=995131
Thanks a lot for the link, if i can get the keyfile, i think i can make an update.zip for the recovery and can open clockworkmod from default recovery. Ill try it
Edit: or i can sign the zip file so that i can flash it from default recovery.
Dexter_nbl did the port of sense for us. In his rom he used a file on sdcard to boot on recovery. Like, if the file called recovery_mode exist on sdcard execute the script to boot up on recovery....this helped a lot!
psicodelico said:
Dexter_nbl did the port of sense for us. In his rom he used a file on sdcard to boot on recovery. Like, if the file called recovery_mode exist on sdcard execute the script to boot up on recovery....this helped a lot!
Click to expand...
Click to collapse
That might have worked if the room booted at all, the problem here seems to be with some hardware driver that is preventing the phone from booting. Only if someone who knows what is preventing it from booting could help me out, i would work on fixing it somehow.
good to see a new project coming up.
got a bit quiet here in the past week, devs probably waiting for motos official froyo release.
anyways, kepp us updated on your progress and good luck!
ksubedi said:
That might have worked if the room booted at all, the problem here seems to be with some hardware driver that is preventing the phone from booting. Only if someone who knows what is preventing it from booting could help me out, i would work on fixing it somehow.
Click to expand...
Click to collapse
That ideia is for you access your system recovery to restore your system without flash a sbf, get root, install system recovery (that take a long time). This way you can try more things. Dexter call the script to verify the file on sdcard in beginning of the process of boot, i dont know how but if you want see take a look the first version of his ROM.
i dont think you can sign the update packages. maybe you should try to ask eugene how this whole cookie cutter thing works
http://twitter.com/eugene_373
http://eb-productions.proboards.com/
would be awesome to get miui on defy...
Sent from my MB525 using XDA Premium App
psicodelico said:
That ideia is for you access your system recovery to restore your system without flash a sbf, get root, install system recovery (that take a long time). This way you can try more things. Dexter call the script to verify the file on sdcard in beginning of the process of boot, i dont know how but if you want see take a look the first version of his ROM.
Click to expand...
Click to collapse
That is exactly what i have been trying to do since my first day. I have asked eugene_373 for help on this. Thanks anyways.
drsouly said:
i dont think you can sign the update packages. maybe you should try to ask eugene how this whole cookie cutter thing works
http://twitter.com/eugene_373
http://eb-productions.proboards.com/
would be awesome to get miui on defy...
Click to expand...
Click to collapse
Thanks for the link I just contacted eugene_373 about this. Ill update once i get a reply.
Keep it up!!
One closer day i will buy the defy
Thank you for your efforts. Look forward to your success
any news?!
Any news ???
I have contacted miui developers to help me out. Waiting for reply now. Lets hope that we can bring miui to defy as soon as possible. Need help from some devs.
What do you mean go to recovery without booting? Without booting to Android you cannot use any other means to write to the Filesystem, so how would you do that? You can't replace the recovery that's installed with the phone, so I don't really see how that would be possible.
Recovery without booting is possible through charge-only-mode, but no one is capable to do it for Defy. And probably it is possible in Defy Sense ROM, if you read the thread. But I did not tried.
an option would be to look for an exploit in the recovery, that allows us to make something like open recovery on the milestone... i would ask the devs from openrecovery
There is the way using the second boot used on milestone (2nd-init) and the way used by Dexter in Sense ROM;
- included ClockWorkRecovery custom edition for this rom
• - Do NOT install the apk release, or it will ruin bootup of sense.
• - activate Recovery by putting an empty file in the root of your sdcard called "recovery_mode"
• content can be anything or empty, just make sure filename is correct.
• - reboot, and it will load into recovery.
Click to expand...
Click to collapse
Sense ROM: http://forum.xda-developers.com/showthread.php?t=933710 (get the first version to see the magic)
2nd-init: http://forum.xda-developers.com/showthread.php?t=1003449
Hi folks
Anyone know of a custom ROM (ICS) that will run on a Cyclone Astro+ ?
Processor = ARM Cortex A8 1.2GHz
GFX = Dual Mali-400 2D/3D graphics, res 800x400
Peace
chris5s said:
Hi folks
Anyone know of a custom ROM (ICS) that will run on a Cyclone Astro+ ?
Processor = ARM Cortex A8 1.2GHz
GFX = Dual Mali-400 2D/3D graphics, res 800x400
Peace
Click to expand...
Click to collapse
Sorry to dig up an old thread, but I've just been given one of these and the stock ROM is dire
Is there anything I can do for this device?
Search xda for Sumvision Astro!
Otherwise try here
chris5s said:
Search xda for Sumvision Astro!
Otherwise try here
Click to expand...
Click to collapse
Cheers Chris, thanks for the pointers.... I think I've balls'd it up
I mistook the standard Android recovery for CWM after running sausagemod... the ROM flashed but the compatibility file wont... so I'm left with a device with no working touchscreen and trying to install CWM from terminal also fails.. It says ... no /sdcard/recovery.img.
I also can seem to get the device in flash mode so I cant revert to the stock rom ether.
If you have any ideas it would be appreciated... one post in that thread reads very similar to my issue, they edited the 'sh install-recovery.sh' apparently and got the device back... but they haven't been here in years so I don't think will reply...
Well, the good thing is, its pretty hard to balls these devices up. As crappy as they are, its usually always possible to get back to stock, or at least get in functioning again...
That said...when you try to install a new recovery from terminal, are you sure you have unzipped the recovery.zip file into a location on your sdcard that is accessible, and have cd'ed into that directory?
Are you using livesuite to try and flash a new stock rom? I don't have my Astro any more, moved on to HP Touchpads (awesome tablets btw), but I seem to remember it could be a bit finicky to get it into flashing mode, what with button pressing etc...
Have you been to slatedroid.com? There is a section for these tablets there too, under Cortex A8 tablets, might be worth a gander on that site.
If I think of anything else I'll let you know...
Cheers
Edit: if the touchscreen isn't working, you can always connect a usb mouse. I did that with mine once when I had flashed the wrong compatibility zip. Think it came with a mini->standard usb adaptor....
Edit2: if you can link the post that was similar to your problem I will look and see what its about, might help!
chris5s said:
Well, the good thing is, its pretty hard to balls these devices up. As crappy as they are, its usually always possible to get back to stock, or at least get in functioning again...
That said...when you try to install a new recovery from terminal, are you sure you have unzipped the recovery.zip file into a location on your sdcard that is accessible, and have cd'ed into that directory?
Are you using livesuite to try and flash a new stock rom? I don't have my Astro any more, moved on to HP Touchpads (awesome tablets btw), but I seem to remember it could be a bit finicky to get it into flashing mode, what with button pressing etc...
Have you been to slatedroid.com? There is a section for these tablets there too, under Cortex A8 tablets, might be worth a gander on that site.
If I think of anything else I'll let you know...
Cheers
Edit: if the touchscreen isn't working, you can always connect a usb mouse. I did that with mine once when I had flashed the wrong compatibility zip. Think it came with a mini->standard usb adaptor....
Edit2: if you can link the post that was similar to your problem I will look and see what its about, might help!
Click to expand...
Click to collapse
Hi Chris! really appreciate your help and getting back to me.... sorry for the delay getting back to you... I was sent away from home for work.
What happened was... I got the drivers installed and working correctly, so I ran sausagemod option 5 and I then mistook the standard Andriod recovery for an early release of CWM... so proceeded to flash the Cyanogenmod 9 ROM, I thought 'Happy days!' its worked... then the MOMO9 file wouldn't flash and I realized that I was indeed in the stock recovery... so subsequently have no touchscreen working.... similar to post 46 in the original thread...
I've connected a keyboard and thought... ahhh this will be easy as I'll run recovery from terminal.... but I thought that had worked but it boots again to the standard android recovery... like in post 28 of the original thread... so again MOMO9 wont flash.
Looking again at the terminal out put it says...'no /sdcard/recovery.img' - I think this is because my 'recovery.img' is on my SD card located at /sdext instead... I guess I would have to edit the CWM file but I'm not really that sure on that... or if it would work...
With no touchscreen I cant click on 'USB storage mode' when I connect it to a PC as I have to use the connection to hook it up to a PC, so I cant use the keyboard... so I cant copy the recovery onto the internal storage and try from there....
And I'm dammed if I can get the bugger to go into 'flash mode' ether so I can return it to stock..... it ether boots or does nothing but blank screen...
I'd be ok if it was mine... but I'm flashing it for my brother which is a blow!
Hi is it possible for you to connect a usb mouse to the tablet, that way you might be able to move the cwm recovery img to the right place? Or use the terminal to move it...when you use the command line to install recovery, are you using the location of the img in your commands? Just type in your location, you won't have to mess with the image itself.
Otherwise livesuite and perseverance should be your route to flashing back to stock and starting again!
Cheers
Or you could open up install-recovery.sh in a text editor and look for the location of the recovery image in that file and change it to suit your setup?
Cheers
chris5s said:
Or you could open up install-recovery.sh in a text editor and look for the location of the recovery image in that file and change it to suit your setup?
Cheers
Click to expand...
Click to collapse
Cheers Chris I'll try that.... I've been trying to install a file manager via terminal.... the odd thing is .APK's dont show up when I go to the root of the SD card and type 'ls' - only .ZIP and .IMG
I'm using the terminal app thats built into the cyanogenmod 9 ROM....
Been hacking Phones and tablets for years... but ever way I turn on this turd with a screen is a dead end....
Edit: I turned on install from unknown sources and theyre now there... but I just get a list of errors go off the screen to fast for me to read... about location etc....
I have no idea what I'm doing in terminal... I left command line with DOS!
I tried this 'pm install astro file manager.apk' I thought that would do it
oh well.... killed it
Just a blank screen... wont turn on.... but I guess its still functioning somewhere as it detects in windows as an unrecognized device...
Livesuite starts but wont flash it..
I built a new PC with 32bit win 7 to flash it... looked to be going ok. it went to 3%, then stoooopid windows tried reinstalling some drivers for it and its been a brick since.
Guess thats game over?
EDIT: Holy [email protected]! it came back! LMAO! its now back to stock!
You were right! I tried my hardest to kill it! dam thing wont die!
Chris, sorry to trouble you again...
I'm back up and running stock... looks like 500m partition size...
I guess to run a custom ROM I need to flash an older stock ROM.... am I really going to gain much with a custom ROM?
Ha ha, good stuff mate, very similar to my experience with the bloody thing….
If you read thru the other thread linked in my first post I'm pretty sure there's a discussion there about flashing custom rom onto a slightly older stock rom as they increased the system partition sizes.
Its worth going for a custom rom. Runs smoother, faster, you just gotta get the damn thing on it in the first place. But worth it when you do!
Cheers
Edit: you may need to flash an older rom… .see this
chris5s said:
Ha ha, good stuff mate, very similar to my experience with the bloody thing….
If you read thru the other thread linked in my first post I'm pretty sure there's a discussion there about flashing custom rom onto a slightly older stock rom as they increased the system partition sizes.
Its worth going for a custom rom. Runs smoother, faster, you just gotta get the damn thing on it in the first place. But worth it when you do!
Cheers
Edit: you may need to flash an older rom… .see this
Click to expand...
Click to collapse
LOL! DONE IT!
Flashed Cyanogenmod 9 from the original post and MOMO9 compatibility... works great! only problem I have is the resolution appears to be slightly out as icons can go off the screen...
Hmmm wondering about Cyanogenmod 10 now! Hmmmmm what did you end up installing?
Geeba said:
LOL! DONE IT!
Flashed Cyanogenmod 9 from the original post and MOMO9 compatibility... works great! only problem I have is the resolution appears to be slightly out as icons can go off the screen...
Hmmm wondering about Cyanogenmod 10 now! Hmmmmm what did you end up installing?
Click to expand...
Click to collapse
Nice, well done mate :good:
Its a while ago, but I think I ended up putting cm10 on it eventually.
The thing with the icons going off the screen can be rectified by using a different launcher, if I remember correctly - try ADW launcher, my personal fave.
Cheers
chris5s said:
Nice, well done mate :good:
Its a while ago, but I think I ended up putting cm10 on it eventually.
The thing with the icons going off the screen can be rectified by using a different launcher, if I remember correctly - try ADW launcher, my personal fave.
Cheers
Click to expand...
Click to collapse
Thanks for all your help Chris, really do appreciate it.
I've had a good play with the tablet over the weekend, I can get CM9 installed and working fine... I then flashed a later stock ROM to give me the 500mb /system partition... but the CM10 .zip just wont work... it flashed ok... but it wont go past the rotating boot screen.... am I missing anything?
EDIT:
Hmmmm I've just downloaded the official 4.2 from sumvision... I guess thats the best it will ever get... bit clunky but usable... I wonder if there is a kernel I can flash...?
I had a problem flashing CM10 over the newer stock rom with 500mb system. The only way I managed it was to go back to the earlier stock rom and remove stuff from the CM10 rom to get it to fit on the smaller system partition. It was a while ago, sorry if that's not much help...
Good luck!
Cheers
hey everyone!
yesterday, I got really tired of froyo so I said ''f$%? it, lets try to root my phone and install jelly bean, that look really slick!''
. well looks like everyone as to start somwhere..
so my problem right now, I am stuck at the custom LG logo, I cant hard reset and even my recovery boot but the menu wont pop up and simply restart my phone..
basicaly, I feel screwed right now does anybody can help me on this?
it is probably something super stupid and simple but I can'T find any solution so I decided to join this forum for a bit of support..
EDIT: my mistake, it went in the wrong section
thx a bunch!
Usually run this when I cluster f my phone
http://forum.xda-developers.com/showthread.php?t=1590523
thanks for the cue, I will also try this. and keep you posted if it worked or not..
better way to learn is to make mistakes!
http://forum.xda-developers.com/showthread.php?t=1180331
ok, most of the link to download the needed files are dead... I might have to rely on your support guys.
the http://forum.xda-developers.com/showthread.php?t=1180331 thread didnt helped enough..
Did you install the adampk rom?
Sent from my LG-P999 using xda app-developers app
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
dubmah said:
WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed
Click to expand...
Click to collapse
I say you needed to use the g2x android development forums on this site to find a suitable jb rom, not this other site. The one click method isn't very stable, so nvflash is most definitely what you need to try to get working. There are very thorough tutorials on how to get that to work. Do you know which clockwork recovery version you have installed? Should be 5.0.2.0. Once you get home, I suggest you read read read. Do as much research you can to make sure you can follow nvflash instructions to the letter. I know I personally spent about a week researching to make sure I had a solid understanding of the procedure.
I recommend getting nvflash going to get clockwork properly installed, then download a rom from xda, nowhere else. I would even say use a gb rom before trying a jb ...the jb roms are hackfest versions, so they have (from my experience) much poorer battery life, and lack hardware acceleration. Netflix and many 3d games won't work. You can use adampk or mazout's roms but they don't have working radio, i.e. no phone/SMS functionality.
Sent from my LG-P999 using xda app-developers app
dubmah said:
no I haven't...
so far , what I did is
root the pone with the one clicker (wich was a success)
did the recovery with the clockworkmod recovery thing,
restarted and exectued this website's tutorial to jellybean (start with WWW stuff.androidauthority.com/g2x-p999-t-mobile-cyanogenmod-10-cm10-unofficial-115536)
and then, look like it failed..
this morning, I managed to get back to the recovery boot screen and found that if I press the house icon it show up a menu.. but this menu giving me access to reboot, wipe cache, data or install update.zip (which was supposed to fix my problem) but this menu is blued out and unaccessible..
dunno if it helped..
right now, I am trying to get acces to my phone doing the no battery boot thing but my pc doesnt seem to recognize my phone + I am at work hehe so I am pretty much limited in acces due tu the it protection and firewall stuff
I am gonna try to redo that stuff tonight at home but meanwhile, if any of what I described may give you a clue on how to help me, I really appreciate the effort!
thanks again for the support guys, I know it can be a pain sometimes to help people screwing some beginner stuff like I probably do right now
Click to expand...
Click to collapse
Boot into recovery, there should be an option to format or wipe system. Do that then flash the ROM. It won't boot if you flash it over stock.
Also, use the paranoid android rom found in the development section, same cyanogenmod base but works better.
Sent from my Nexus 7 using Tapatalk HD
great ! thx for the advices ! yeah I Will read some more first, making sure I do thing properly, for now, I will try to revert at least to my backup and wait til I know what I'm doing!
thx again, I keep you up about the progress !
progress!! .. I tried to start my phone without the battery.. my pc recognized the phone for about 10sec and then the icon disapeared and until then, nothing I plug I start there is no way I can make my pc to recognize the phone...
does this happened to anyone before?
allright! I have bean reading about the NVFlash! that help A LOT! actually it almost fixed my thing! the phone is now unbriked YAY
I just keep replying to myself incase there is another guy who dont know crap about the obvious, if it can help the thread worth it
I used this tutorial to fix things,
http://forum.xda-developers.com/showthread.php?t=1248644&highlight=nvflash+steps
My main issue was the APX driver wich wasnt installed.. now I know bit more, I still have issue but luckily things goes forward so it gave me the boost to keep working on
but I face a new problem so maybe some of you might be able to help on that new issue
I am from montreal and here in quebec we have videotron instead of t-mobile and since I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
hope it helps
dubmah said:
I used a t-mobile boot it looks like my sim card is not recognized anymore..
is there a way to fix that? am I supposed to find a videotron thing?
Click to expand...
Click to collapse
What do you mean by "T-Mobile boot" and "videotron thing?"
Sent from my LG-P999
---------- Post added at 10:09 PM ---------- Previous post was at 10:02 PM ----------
Ok, wait I think I understand what you're saying now. If you can, pm the op of that thread you used to unbrick. Ask that person if you need some kind of different file in that .zip file to work on your carrier.
I remember having to use that guide to get back to stock. Glad to see you're making progress. I know it can be frustrating when devices get wacky. Good luck!
Sent from my LG-P999
hehehe sorry, I am not fully used to the right terms so I rather stay in the gray zone by using words like ''thing''
but I can now oficially say I was talking about ROMs
finally, I managed to bring back my phone to the stock mode everything seem to work!
now I can brick it again!
thx for the help!
I began to wonder if it was just a matter of changing APN settings?
Sent from my LG-P999
this, or... putting the simcard in the properly? !!
Hi everybody ! Ill try to keep it simple as I'm sure its covered somewhere but here goes ....
Ive been using my shield portable, rooted, for ages now no problems.
Like many Ive updated it in short ever since nothing whatsoever has worked properly , most annoyingly the screen doing backflips when you go near it and hundreds endless strange updates when rebooting.
Anyway I don't think you or I or any of us want to waste time trying to figure out why its done any of this but I just want to be able to fix it. I guess I'm going to have to start again somehow! its worth noting here that all my backup apps like Helium now don't seem to work.
After the update I of course ReRooted and it appears fine from boot loader , still says unlocked. but upon usage its clearly very confused about whether its rooted or not !
In short its useless. Advice please My kung Fu warriors
May your arrows fly straight and true
I have no idea about the various issues, but I would perform a factory reset, and clear cache and dalvik cache using at least 3 swipes per each function. The method of rooting I recommend is by flashing a zip of SuperSU from a custom recovery menu. CWM or TWRP are both available for the NSP. After flashing SuperSU, when you reboot and go into SuperSu you'll see that it's installed (locked down tighter) as a system app.
Downloads:
SuperSU (latest stable version) v2.65
CWM Recovery Menu (latest version) v6.0.4.4
TWRP (Modified recovery (based on TWRP v2.8.7.0)
Sorry. This is the best I can offer you right now. If this doesn't work I would reflash the stock images of whatever OTA you wanna be on. The images can be found @:
SHIELD Open Source Resources and Drivers. You'll need at least the platform-tools portion of the Android SDK (to use Fastboot to flash from recovery). A user friendly PC app that can basically do all this sort of stuff is Shield Ram v1.1. You might find that easier to use.
Oh and here's the latest Minimal ADB and Fastboot Drivers installer [v1.3.1]
If you need further help, let me know.
Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again
[/COLOR]
Marrhead said:
Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again
Click to expand...
Click to collapse
Yeah, pretty much the rule is generally "as long as you can still see the screen, it's probably fixable". Sounds to me like your best bet, would be to download the OTA you wanna be on, and flash a new install to your Shield. It's the quickest way from A-B. I'm about 99% sure that this would solve the problem (as long as you re-root it properly). Though if you have your reasons, you can try some of the other things first. You're welcome and let me know how things go!
So where does one get the latest OTA?
cheers
Marrhead said:
So where does one get the latest OTA?
cheers
Click to expand...
Click to collapse
I did link up the main Nvidia page that would lead to the OTA images, but here's a direct link to DL just the OTAs:
Edit: you can get there through the link I included in my previous post: SHIELD Open Source Resources and Drivers. I'm having issues with editing posts, and all sorts of odd **** with the link trying to post a more direct link. It's an Nvidia site, just scroll down to Shield Portable Recovery OS Images (something like that).
Unfortunately there are only Linux and Windows downloads available. I'm not sure what your best option would be, as you have a Mac. You could contact Nvidia support, and see what they say about it. Sorry, but I don't think I can probably help much more than this.When I contacted Nvidia support about a year ago, they were pretty helpful. Hopefully you get this sorted soon. Oh and the OTAs are flashed via a terminal/command prompt. So if you can emulate DOS on your Mac (which I don't see why not...DOSbox? maybe) then that sounds to me like the solution.
Ok , hit another brick wall. Im using a windows computer now, followed all the instructions i can find, and now the bootloader seems dysfunctional.
Ive got adb and fastboot and its recognising the device but once rebooted into bootloader which loads fine, the commands say no device found and nothing works in this mode.
If i hit recovery mode then a little dead android appears! poor little guy.
I tried shield ram but it had same problems, seems to run fine but cant find shield once its in bootloader...
Ive got the image zip of the update i want to flash but no idea if im doing it right- not sure how to use it.
Help!