Hello! I downloaded the TAEL ROM archive TAELROM_v5.21914_22AUG2010 and the other version too, i run the application RaphaelWrapper but after it starts to run...i see the 0% bar...and then after 1 minute :
Error [262]: Update Error
The ROM Update Utility has encountered communication errors durin the update process. The program will guide you step-by-step to recover from the errors so you can continue with the update! In the end i must remove the battery. What can i do to instal this ROM. Thank you!
HTC touch PRO
I forgot to mention that i use a HTC Touch PRO Raphael. Thank you!
Read the guide for NOOBS.
You know, the one clearly marked, read this first.
I had the same error every time. I had to read the guide and install it from an SD Card.
Alexsson said:
I forgot to mention that i use a HTC Touch PRO Raphael. Thank you!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=448008
Thank you very much!
I did it!
I had to instal first RaphaelHardSPL-Unsigned_190_1_3 then it worked. Thanks guyz!
I already have that downloaded and I still get same error. Fuze
Now I'm trying to do SD card, but it says no image found on boot screen
Toastlover15 said:
I already have that downloaded and I still get same error. Fuze
Now I'm trying to do SD card, but it says no image found on boot screen
Click to expand...
Click to collapse
Have you formatted the card appropriately ?
Toastlover15 said:
I already have that downloaded and I still get same error. Fuze
Now I'm trying to do SD card, but it says no image found on boot screen
Click to expand...
Click to collapse
What's your memory card model?
I have two memory cars, one is Transcened which I can't update with that (no image found) and one is SanDisk which I update my device with that. So, check your memory card compatibility and be sure it is formatted to FAT32.
Regards
Related
Most of you have noticed that my ROMs require flashing through the SD card. I've given out the instructions many times, but they tend to be lost in the shuffle that is day to day posting so here is a whole thread dedicated to it:
1. Format your SD card to FAT32.
2. Place HERAIMG.nbh into your SD card.
3. Hold the camera button then press the soft reset button while holding the camera button.
4. Press the down volume when it asks you to press something.
If this doesn't work, it means either:
1. Your SD card isn't fast enough. You can try partitioning the SD card so that it only has a small amount of space formatted. This can be read faster by the bootloader.
2. You don't have a HERAIMG.nbh file in your SD card.
3. Your HERAIMG.nbh was made with a small number in the "version" number.
4. Your SD is a SDHC. The driver that allows SDHC compatibility is not loaded in the bootloader. Buy a cheap little 1GB card to flash with.
3. Your HERAIMG.nbh was made with a small number in the "version" number.
Click to expand...
Click to collapse
That's mean IPL & SPL right?
I read about WM6.1 in this forum require IPL or SPL morethan 4.xxx
But my Herald (Dopod C800) IPL&SPL 1.09.0001
Can you give any advice How can I do for upgrade to WM6.1
Thank you
Newbie from Thailand
pungcheer said:
That's mean IPL & SPL right?
I read about WM6.1 in this forum require IPL or SPL morethan 4.xxx
But my Herald (Dopod C800) IPL&SPL 1.09.0001
Can you give any advice How can I do for upgrade to WM6.1
Thank you
Newbie from Thailand
Click to expand...
Click to collapse
No, when making the NBH you have the option of setting a version number.
In order to flash any third party ROM you need an IPL and SPL of 4.xx and to HardSPL your phone (HardSPL requires an SPL of 4.xx)
To upgrade your SPL and IPL you can try upgrading your phone with it's most updated stock RUU (Some, like HTC bring the upgrade) or you can try the GoldCard method. (Search for the word "Goldcard".)
how can i do this i have a herald 4350 or well the t-wing and i doesn't want to connect to my computer well it connects but 3 seconds later it disconnects i don't know what going on and i been trying to update to another rom. thanks for any help.
ghostnj said:
how can i do this i have a herald 4350 or well the t-wing and i doesn't want to connect to my computer well it connects but 3 seconds later it disconnects i don't know what going on and i been trying to update to another rom. thanks for any help.
Click to expand...
Click to collapse
Just follow the directions I just posted. They should work just fine.
ivanmmj said:
If this doesn't work, it means either:
1. Your SD card isn't fast enough. You can try partitioning the SD card so that it only has a small amount of space formatted. This can be read faster by the bootloader.
2. You don't have a HERAIMG.nbh file in your SD card.
3. Your HERAIMG.nbh was made with a small number in the "version" number.
Click to expand...
Click to collapse
Hi Ivan,
Just to let you know though, there must be some kind of problem. I followed the instructions and flashed through my SD the nbh (os+radio) numerous times but after the flash my Herlad always failed to boot. The flash was successful, I got a message "press any key to continue" from the bootloader and after a softreset the screen was always black with no signs of booting.
Also, just to let you know, the program that opens the htcrt.proj file fails to register and I always had to /right click/open with and then manually select the os and radio files to create the nbh.
papajohn said:
Hi Ivan,
Just to let you know though, there must be some kind of problem. I followed the instructions and flashed through my SD the nbh (os+radio) numerous times but after the flash my Herlad always failed to boot. The flash was successful, I got a message "press any key to continue" from the bootloader and after a softreset the screen was always black with no signs of booting.
Also, just to let you know, the program that opens the htcrt.proj file fails to register and I always had to /right click/open with and then manually select the os and radio files to create the nbh.
Click to expand...
Click to collapse
If it fails to boot, it means that the ROM you created has something wrong in it, not that the flashing process has something wrong in it.
As far as the proj file, if you have windows Vista, it may have not set the permissions properly.
Hi.
I'm fairly new to this and I'm trying to flash a JustMe ROM. I have built both a XPR and a LZX but none of them worked. I just follow your intructions and I get to a screen with gradients of Red, Green, Blue and a white bar in the background and IPL 4.17.0001 and SPL 4.17.0000. From what I understood, something should happen now, right? Well, it doesn't.
What may be the problem?
jantunes said:
Hi.
I'm fairly new to this and I'm trying to flash a JustMe ROM. I have built both a XPR and a LZX but none of them worked. I just follow your intructions and I get to a screen with gradients of Red, Green, Blue and a white bar in the background and IPL 4.17.0001 and SPL 4.17.0000. From what I understood, something should happen now, right? Well, it doesn't.
What may be the problem?
Click to expand...
Click to collapse
You should not see the gradients right away.
If you followed the steps exactly, and your NBH has a version number of 5.2.xxxxx or higher: Then your SD card might not be fast enough or it might be a SDHC which won't work.
How big is your SD card?
It's a 2GB Silicon Power MicroSD. How do I check the version of my NBH?
Also, the NBH is not the only file I have in my card. Do I have to format it or if it is already in FAT32 (which it is) I don't need to?
btw, a message saying something like "Checking SD card" (something like that, couldn't see it right) appears before the gradients but only for 1/4 of second or something.
jantunes said:
It's a 2GB Silicon Power MicroSD. How do I check the version of my NBH?
Click to expand...
Click to collapse
When you CREATE the NBH, it says the version. What number does it say there?
jantunes said:
Also, the NBH is not the only file I have in my card.
Click to expand...
Click to collapse
That's fine.
jantunes said:
Do I have to format it or if it is already in FAT32 (which it is) I don't need to?
Click to expand...
Click to collapse
The reason I mention it is because SD cards come preformatted as FAT16.
jantunes said:
btw, a message saying something like "Checking SD card" (something like that, couldn't see it right) appears before the gradients but only for 1/4 of second or something.
Click to expand...
Click to collapse
That's where the flashing is done. If you only see it for 1/4 second, it means:
1. You didn't follow the directions (FAT32 and version number)
2. The SD card is too slow.
The NBH version is 5.19588.
jantunes said:
The NBH version is 5.19588.
Click to expand...
Click to collapse
Make it 5.2.19588.
Did you format the card to FAT32?
It was already formated. I'll try with this version number.
EDIT: Didn't work. I'll format the card.
jantunes said:
It was already formated. I'll try with this version number.
EDIT: Didn't work. I'll format the card.
Click to expand...
Click to collapse
The card was already formatted to FAT32? Not FAT16?
Yes. It was FAT32 but I reformated it anyway. It now loaded but gave me an "Invalid Certificate" error.
jantunes said:
Yes. It was FAT32 but I reformated it anyway. It now loaded but gave me an "Invalid Certificate" error.
Click to expand...
Click to collapse
So the formatting was still an issue. Weird. Ok, so now it's reading it but it's not validating the certificate. Have you HardSPL'ed?
No, as I don't even know what that is. So far I have only needed the Flash Center application to flash the ROMs.
jantunes said:
No, as I don't even know what that is. So far I have only needed the Flash Center application to flash the ROMs.
Click to expand...
Click to collapse
The Flash Center only works through inserting the code through Windows Mobile. Since my ROMs are flashed outside of Windows Mobile, therefore, it requires a HardSPL'd phone. HardSPL is better than the Flash Center since it protects the SPL and IPL from being overridden in a bad flash or when you accidently use a ROM that isn't meant for your phone. But, the HardSPL can be dangerous is you don't follow the install process properly as it can brick your phone.
Hum, ok. I'm quite intuitive in understanding how to hack devices so don't worry as I'll probably not brick my phone. I'll search for HardSPL and when I'm done I'll post the results.
Thanks for all the help and for your (I imagine) great ROMs.
EDIT: HardSPL'd my phone and everything is working great. Very fast ROM, I may say. Not as good-looking as the Open Touch Project I was using, but sometimes functionality is better than style.
when I try to enter Boot loader in VOX ..... the first msg on the screen says searching for SD card... and it enters the Bootloader mode......the Color strips....
but nothing happens after that ..!!!!
any suggestions ??
What do you want to do?
I am trying to load the HTC diagnostic file.....named as vox0diag.nbh
please see my earlier post for trying to Format FAt of my Vox and suggest.
thanx
Why would you want to format your Vox? I know it loads vox0img.nbh through the boot loader, I don't know if it does that with this file naming scheme!
thanx for the Quick reply....
this a diagnostic file that HTC service centers use for VOX.
I read about it in the Technical Manual of VOX that laid my hands on thru' a friend of mine.
My VOX is dropping calls i,e. you can hear the Phone Ring but I have NO Indication that I hav an incoming call.
I thought that Formating and then loading a New ROM with New Radio Version could perhaps solve the problem....
BTW I hav tried nearly all ROM's and Radio Version's available on the XDA:FTP
That is why all this exercise....
any more help will be really appreciated...
indtram said:
I am trying to load the HTC diagnostic file.....named as vox0diag.nbh
/QUOTE]
sd should be formatted as fat16 - fat32 or cards bigger than 2gb may not work
if u want just format sd card then use wmstorage and under windows mount phone as external disk - .. just format it as normal removable disk
can you put this file somewhere for download ?
Click to expand...
Click to collapse
indtram said:
I am trying to load the HTC diagnostic file.....named as vox0diag.nbh
please see my earlier post for trying to Format FAt of my Vox and suggest.
thanx
Click to expand...
Click to collapse
where did u get vox0diag.nbh file???Could you upload it on a server please??
cardynal said:
where did u get vox0diag.nbh file???Could you upload it on a server please??
Click to expand...
Click to collapse
Check it out
http://wiki.xda-developers.com/index.php?pagename=vox_sdcardflashing
Some confusion here it seems:
@indtram:
Did you get your hands on a vox0diag.nbh file or did you just read about this in the manual?
Regarding Flashing via the boot loader:
1.) the card must be a NON-SDHC card, i.e. 2GB or smaller
2.) this card must be FAT or FAT32 formatted, NTFS is no option
3.) the flash file must be named vox0img.nbh for normal flash files
4.) the bootloader will ONLY load correctly signed .nbh files - cooked ones don't work
5.) if the card carries the right "Gold key" in its boot sector, the bootloader will allow also vendor independent flashing - yet correctly signed is a must, at least for the normal boot-loaders that come with official ROMs.
If anyone has got hold on this vox0diag.nbh, please put it to the XDA FTP.
Reassuming:
1) Tried to Update to RC33 my new Gphone and Failed!
2) Tried to wipe and retry the update and fail again.
3) Repeat STEP 2 for some times
4) Try to flash from bootloader with RC29 (DREAIMG.nbh) but fail.
5) Use DREADIAG.NBH that say me: 00028002
6) Qmat 4.24 say me:
a) When I click "Get SD Card Serial from Wince Device" on Omnia i900 [Win Mobile 6.1] the Omnia say: "There was a problem with device.exe"
b) If I continue, then click "Save Goldcard Image to WINCE SD", Qmat show me an Error popup that say me: "Done writing SD card to WINCE Device"
Now my phone is still dead.
Any ideas???
Crying...(while wait your answers...)
when you power on the phone, does it go to bootloader or to recovery? did you have the HardSPL installed already? and do you have a micro SD card reader
The Phone goes ONLY in Bootloader mode.
I have the MicroSD USB reader.
I have the original SPL.
kinda sounds like a bad SD card to me -- did you try another one?
ok, go to the thread that gives you the walkthrough on rooting the phone, and get the RC29 or RC7 from there, if your phone was already on RC30 or above then get the 29, if you were on rc8 or above then get RC7. then you need to format your card in the reader to FAT32. then unzip the file you downloaded a minute ago and rename the .nbh file to DREAIMG.nbh and try again. from the looks of it you had a CID error, though i have never gotten one of those so i don't know exactly what they say. try again to flash the .nbh file in the bootloader
I have change 3 SD card...but the Flash don't work.
Say me:
____________
Update Terminated
UPDATE FAIL
____________
Tuba I have tried ALL the US DreaIMG that I found on the WEB! ALL!!!
But the results is the same...
I have tried to use QMAT but don't help me...
rdware said:
Tuba I have tried ALL the US DreaIMG that I found on the WEB! ALL!!!
But the results is the same...
I have tried to use QMAT but don't help me...
Click to expand...
Click to collapse
Are you using mac to format the sdcard? Sometimes, at least for me, if I format on my mac before putting dreaming.nbh on the card mac will add extra little files to the card that the phone does not like. Make sure to FORMAT the card to Fat32, then copy the file, then do NOTHING else with it before putting it back in your phone and flashing it. Also as stated above, re-download the file to make sure it isn't a corrupted one. If this isn't your case, sorry for wasting your time.
Have you had any luck?
I also have a bricked US G1 with original SPL. I was thinking of using QMAT to create a goldcard image so I could load DREADIAG.NBH since the one I have must be CID locked / for another CID (I get the 00028002).
Thanks.
I have successfully loaded a DREADIAG.nbh for a different CID using a goldcard image. Now, some stuff in there didn't work as expected, and the service manual if a bit short on info in that area. Also, it seems to work with RUU for some things. I'll have to grab a windows box tomorrow and see what I can do there.
hie i have hera100 for 6 months still dead any solution. plz help when you switch it on now stops at IPL 4.14.0002 SPL 4.10.0000 i tried to change rom from germany to english now device stuck i did not hardspl or uspl the device. when i used rom update utility stops at 2% plizzz help
gold card fails
i tried formating 2gig mmc to fat32 make it gold card by copying heraimg.nbh phone says security not cleared. tried other roms say invalid vendor any one to help?????? thnx in advance
wujun0122 said:
search google engine
Click to expand...
Click to collapse
i 've googled everywhere no answer for my particular prob because this one stops at bootloader and wasnt hardspl or uspl before flashing new rom. anyone help!!!! pliz!!!
Okay. You will need a 256MB or less SD card.
Format it to FAT32.
Place one of my SD version ROMs (one my HERAIMG.nbh files) onto the SD card with nothing else on it.
Boot phone to bootloader.
Use the volumeslider down to select that you want to flash the ROM when you see in the lower left hand corner red numbers counting from 10 to 1.
Wait..
Wait some more..
Press volumeslider down again when it says successful.
SD CARD HAS TO BE LESS THAN 256MB OR LESS
Tribulattifather said:
Okay. You will need a 256MB or less SD card.
Format it to FAT32.
Place one of my SD version ROMs (one my HERAIMG.nbh files) onto the SD card with nothing else on it.
Boot phone to bootloader.
Use the volumeslider down to select that you want to flash the ROM when you see in the lower left hand corner red numbers counting from 10 to 1.
Wait..
Wait some more..
Press volumeslider down again when it says successful.
SD CARD HAS TO BE LESS THAN 256MB OR LESS
Click to expand...
Click to collapse
okay thanx for the answer so where do i get your heraimg.nbh will try
http://forum.xda-developers.com/forumdisplay.php?f=349
Any post that has [ROM] in front of it and has my name underneath it is called a ROM Suite. I have about 4 downloads in each Suite.
Two for Herald users and two for Wing users.
And for each user I have an SD version (the HERAIMG.nbh) and an RUU (RomUpdateUtility version).
Now to flash one of my ROMs you need to be HARDSPL'd. Which means that your IPL and SPL need to be greater than 4.xx.xx.xx.
You originally stated that your "IPL is 4.14.0002" & your "SPL is 4.10.0000." So you should be all set to flash my ROMs.. If you're not sure, then on any one of my ROM Suite threads get the HARDSPL folder and follow the directions that are in the folder.
thnks very much, but i cant install those three files into device as the set is stuck at showing IPL and SPL. i downloaded HARDSPL folder to my desktop. pliz help as to how i do it. when i use rom utility says invalid vendor and when i use memory card it says security not cleared, when i change .nbh on mmc says checking sd contents then back to three colors IPL and SPL
Have you tried flashing an original ROM to your device?
Look HERE.
thanks i tried that rom says invalid vendor. so i downloaded HardSPL (Wing-Herald) folder but active sync not recognise device. rom utility says update error. how best can i do it
You've tried the original shipped ROMs from post number #9?
hera100 no solution
yes i have tried when i conect usb device shows usb but activesync wont pick it, i tried downloading itrib rom on your post it stops at 3% the rest they stop at 2% they says update error. when i use memory card says invalid certificates. plizzz help
anyone to help with my hera100 activesync wont recognise but when i use rome utility phone flashes up to 2% anywhere to do it or must i throw it away pliz plz help. thanx in advance
hera100
so no solution as yet for my hera100. is it possible to flash using RJ45 cable???
Htc m8 S-Off latest firmware, latest twrp recovery. cant flash ANY new roms, keep coming back as e:/file corrupted. Please help. Got new SD Card, Formatted it , latest S-off RUU . Please help
Check that the md5 matches that provided by the download page. It seems most likely that you just have a bad download.
I downloaded and re downloaded every single rom its just i cant flash any new rom in twrp..
toxicsulfur said:
I downloaded and re downloaded every single rom its just i cant flash any new rom in twrp..
Click to expand...
Click to collapse
What version of twrp r u using, and what's the error?
You also never confirmed checking md5.. You can redownload all day long but without md5 match there is no confirmation of full correct download.
Latest version of twrp.. i found the issue..i downloaded fluent rom, check md5 on computer it was matching then i transfered it to phone memory it was fine but soon i transfered that to sd it chnaged. Dont know what the issue is.
toxicsulfur said:
Latest version of twrp.. i found the issue..i downloaded fluent rom, check md5 on computer it was matching then i transfered it to phone memory it was fine but soon i transfered that to sd it chnaged. Dont know what the issue is.
Click to expand...
Click to collapse
Glad you got it figured out my friend!
Could be the USB cord going bad, or possibly the HTC drivers needing updating.
can i install Rom from Phone internal Memory or it will wipe it ?
toxicsulfur said:
can i install Rom from Phone internal Memory or it will wipe it ?
Click to expand...
Click to collapse
You could put it on the internal memory and use the file manager from within twrp to move it over to the sd card.
Guys good News cause of all problem was my samsung 64GB class10 SD card . I have to use partiton editor on pc to make new partition FAT32 with 32kb custer. Problem solved no more E:/ file corrupted error. Thank you very much for help and support.